Jet Jtss 1700 nakup rabljenega (65)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CE200 series is an electrically driven high-pressure unit designed for operating pressures ranging from 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal components with stainless steel side frames. Four rubber feet ensure secure positioning. A lifting eye enables easy transportation of the unit. Comparable but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Hedpfjhga S Djx Afaop Available models: ----- 50 Hz - bar - l/min: CE200-200-280 60 Hz - bar - l/min: CE200-200-350 Other configurations available upon request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Current: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Supplied with standard accessories.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CD700 is capable of effortlessly performing cleaning applications with high demands on flow rate and pressure. The pump is powered by a 6-cylinder Volvo diesel engine. There are two engine variants available: one featuring an exhaust system compliant with EU Stage V / US EPA Tier 4 final, and another with an exhaust system compliant with EU Stage II / US EPA Tier 2. The Stage V solution utilizes a pure SCR exhaust aftertreatment system. The frame is corrosion-resistant, primed, and painted for an attractive appearance. It is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully enclosed solution in trailer or container configurations. Hedehgblkspfx Afaop The CD700 can be fitted with a manual transmission, enabling the pump to operate across several flow ranges, and even allowing for manual crank operation in the lowest gear. Similar, but not Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available Models: ----- Model Pressure Flow Rate CD700-1000 1000 bar 261 Lpm General Specifications: ----- Max. Pump Speed: 522 rpm Drive Engine: 6-cylinder Volvo Diesel, EU Stage V or EU Stage II Engine Power: 522 kW Engine Speed: 1800 rpm Diesel Tank: 800 L Maximum Fuel Consumption: 90 L/h Dimensions & Weight on Base Frame: 3100mm x 1700mm x 2300mm (5850 kg)

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.160 mm, skupna dolžina: 1.350 mm, skupna višina: 1.700 mm, pritisk: 2.500 letvica, obratovalni tlak: 2.500 letvica, gorivo: dizel, skupna masa: 1.850 kg, največja hitrost vrtenja: 1.800 obr/min, dolžina visokotlačne cevi: 20.000 mm, lastna masa: 1.850 kg, kapaciteta rezervoarja za gorivo: 140 l, vrsta hlajenja: voda, moč: 120 kW (163,15 KM), tlak vode: 2.500 letvica, zmogljivost črpalke: 25 l/min, Oprema: Na voljo je tipska ploščica, žerjav, CD160-2500 s pritiskom 2500 bar in pretokom 25 l/min. Črpalko poganja vodno hlajen 4-valjni diesel motor SISU. Celoten okvir je izdelan iz vroče pocinkanega jekla, kar zagotavlja dolgo življenjsko dobo in odpornost proti koroziji. Okvir je opremljen z gumijastimi nogicami, odprtinami za viličarja in dvižnimi očesi na vseh štirih vogalih. Stroj ima pocinkano strešno ploščo s stranskim nosilcem za zaščito in shranjevanje na primer visokotlačnih cevi. Podobno, vendar ni Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma itd. Splošne specifikacije: Delovni tlak: 2500 bar Pretok: 25 l/min Maks. hitrost črpalke: 560 min⁻¹ Pogon: 4-valjni diesel motor SISU Moč pogonskega motorja: 119,3 kW Hitrost motorja: 1800 min⁻¹ Hjdpfjxufbtox Afaep Rezervoar: 140 l Najv. poraba goriva: 26 l/h Dimenzije in teža praznega SKID-a: 2160 mm x 1350 mm x 1700 mm (1850 kg) Vključno s standardno opremo.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Mounted in a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to machines from Dynajet, Falch, Kärcher, Oertzen, etc. Hodpfxshf Naks Afaop Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General Specifications: ----- Drive motor output: 6.0 kW Voltage: 400V (50Hz) - 440V (60Hz) Current: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CE40 belongs to our series of high-pressure cleaners with electric drive for pressures ranging from 100 to 2,000 bar and a flow rate of 9 to 160 l/min. The frame is constructed of hot-dip galvanized sheet metal parts with surrounding stainless steel side rails. The front wheel and two large rear wheels, including a parking brake, facilitate easy maneuvering and stable positioning. A lifting eye makes transport simple. Similar, but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available Models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and additional models available—see datasheet or upon request. General Specifications: ----- Drive motor output: 30 kW (50 Hz) / 33 kW (60 Hz) Voltage: 400V (50 Hz) - 440V (60 Hz) Amps: 57A (50 Hz) - 57A (60 Hz) Hjdshga Irepfx Afaep Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CD25 series machines are compact high-pressure cleaners with pressures ranging from 170 to 500 bar and a flow rate of 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for long service life and corrosion resistance. A powder coating provides an attractive appearance. The machine has very compact dimensions of 1200mm x 800mm, matching the footprint of a standard EURO pallet. The frame stands securely on four large rubber feet. The high-pressure unit is also equipped with forklift pockets and a central lifting eye, allowing for easy handling and transport. Comparable to, but not the same as, Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow Rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General Specifications: ----- Max. pump speed: 1750 rpm Drive engine: Kubota diesel, 3-cyl. water-cooled Engine power: 18.6 kW Engine speed: 3000 rpm Tank: 28 L Hjdehgbfhjpfx Afaep Max. fuel consumption: 5.7 L/h Noise level (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300mm (350 kg) Standard accessories included.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CDT50 trailer-mounted unit covers a pressure range from 230 to 2000 bar with a flow rate of 11 to 80 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. Additionally, the frame is primed and subsequently painted, creating a highly attractive appearance. The frame can be easily pulled out for maintenance. The CDT50 trailer version can be configured with a wide range of options, such as a hot water boiler, electrically operated hose reel, remote control, and more. Similar, but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow Rate CDT50-230 230 bar 80 l/min CDT50-400 400 bar 40 l/min CDT50-500 500 bar 33 l/min Hodehgbkfjpfx Afajp CDT50-700 700 bar 25 l/min CDT50-1000 1000 bar 20 l/min CDT50-1250 1250 bar 15 l/min CDT50-1380 1380 bar 13 l/min CDT50-2000 2000 bar 11 l/min General Specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel, 4-cylinder, water-cooled Engine power: 37.3 kW Engine speed: 1900 rpm Tank: 90 L Max. fuel consumption: 11.0 L/h Sound level (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900mm (2000 kg)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CD200 series of our high-pressure units covers pressures from 200 to 2800 bar and a flow rate from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long-lasting durability and corrosion resistance. For an attractive appearance, the frame is primed and subsequently painted. The machine dimensions are 2250 x 950 mm. The frame is fitted at all four corners with rubber feet, forklift pockets, and lifting eyes. The unit features a galvanized roof plate with a side bracket for protection and storage of items such as high-pressure hoses. Comparable but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID Models: Model Pressure Flow Rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General Specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optional without AdBlue) Engine power: 149.1 kW Engine speed: 1950 rpm Tank: 135 L (Skid) / 200 L (Trailer) Hjdpfx Ashgbhnefaep Max. fuel consumption: 18–20 L/h Dimensions & unladen weight SKID: 2170 mm x 1350 mm x 1810 mm (1785 kg) Dimensions & unladen weight TRAILER: 3800 mm x 1900 mm x 2000 mm (2500 kg) Standard accessories included.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CE150 series is an electrically powered high-pressure unit designed for a pressure range from 200 to 2500 bar and a flow rate from 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal components with stainless steel side frames. Four rubber feet ensure secure positioning. A lifting eye facilitates transportation of the machine. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min: CE150-200-240 Hsdpjhga Scofx Afasp CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 For 60 Hz and other versions, please refer to the datasheet or inquire directly. General specifications: ----- Drive motor output: 90 kW (50Hz) / 110 kW (60Hz) Voltage: 400V (50Hz) – 440V (60Hz) Current: 160A (50Hz) – 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Supplied with standard accessories.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 635 mm, višina brušenja: 133 mm, – leto proizvodnje: 2008 TEHNIČNI PARAMETRI: Hedpfx Afsw Ip Hueaep – nazivna moč: 5550 W – dejanska moč: 3700 W = 3,7 kW – maksimalna širina brušenja: 635 mm – maksimalna debelina obdelovanca: 133 mm – minimalna debelina obdelovanca: 0,8 mm – minimalna dolžina obdelovanca: 230 mm – brusilni valji: 2 x ø152 x 635 mm – nastavitev višine drugega valja – vrtljaji: 1400 obr/min – širina brusilnega traku: 600 mm – dve hitrosti podajanja – dimenzije stroja (d/š/v): 110 / 110 / 110 cm – teža: 332 kg

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 12 h, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) Met deze machine kunt u ook losse 3mm pellets gebruiken! En natuurlijk blokken. Zo goed als nieuw, 1 jaar garantie Inclusief slangen en nozzle. De COLD JET machine is geschikt voor industriële reiniging, zowel voor kleine als zeer grote projecten. Het voordeel van deze machine is dat deze niet is uitgerust met de nieuwste generatie elektronica. Het is een van de krachtigste machines op de markt. Deze machine verkeert in uitstekende staat. Cold Jet i3 Microclean & Droogijs Press. Compleet straalsysteem uitgerust met de volgende accessoires: COLD JET i3 Microclean (12 UUR GEBRUIKT) 1 x 20' straalslang 1 x Coldjet applicator 1 x nozzle Een van de beste machines ter wereld. Geen elektronica. Daarom zeer betrouwbaar. En voordelig in onderhoud. Voor vragen of het plannen van een bezichtiging, neem contact op met DrDryice. Alle verkochte machines worden geleverd met 1 jaar garantie. Reparaties en onderhoud zijn mogelijk voor Cold Jet machines. Wij leveren ook nieuwe Cold Jet machines. Neem contact met ons op. Wereldwijde verzending mogelijk. Hedpfxexga Tze Afajp Cold Jet droogijsmachine te koop, droogijsmachine te koop, droogijsstraalmachine te koop, droogijs straalmachine kopen, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 te koop, Cold Jet Aero 40FP te koop, Cold Jet Aero 40HP te koop, Cold Jet Aero 75 te koop, Cold Jet Aero 75 DX te koop, Cold Jet Aero75 DX, Cold Jet 75DX, gebruikte Cold Jet machine, tweedehands droogijsstraalmachine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industriële reiniging, machine cleaning, onderhoudsreiniging, productielijn reiniging, matrijsreiniging zonder demontage, verfverwijdering droogijs, coating removal dry ice, roestverwijdering, brand- en roetschade reiniging, elektrische kast reiniging, voedingsindustrie reiniging, automotive reiniging, drukpers reiniging, dry ice blaster 20 bar, high pressure dry ice blaster, non abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, droogijsstraalmachine Nederland, droogijsmachine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,025 mm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 310 mm, natančnost pozicioniranja: 0,025 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, maks. debelina aluminijaste pločevine: 300 mm, obratovalna hitrost: 15.000 mm/s, pritisk: 4.150 letvica, trajanje garancije: 24 meseci, hitrost rezanja: 15.000 mm/min, največja hitrost vožnje: 20.000 mm/min, obremenitev mize: 1.200 kg, leto zadnje generalne obnove: 2025, višina izdelka (maks.): 300 mm, Brand new waterjet cutting machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The X-JET modern, fully professional waterjet cutter is designed for the most demanding customers. Leveraging the latest technologies and a rigid frame structure, this machine delivers outstanding cutting quality, high precision, and long-lasting durability. 🔹 Key features: Working area (3 axes): 2000 x 4000 mm X/Y feed rate: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Maximum table load: 1,200 kg/m² Enclosed moving units + servo drives Automatic central lubrication Advanced CNC control software + IGEMS CAD/CAM 2D/3D Optional equipment: 💥 5X cutting head: Taper compensation and beveling up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond head Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent systems: 12 MP camera Automatic tool angle setting system Precision 5-axis cutting calibration system Hjdpfx Afev Tmxusaep 💦 High-pressure pump: Maximum working pressure: 4,150 bar (60,000 psi) Constant working pressure: 3,792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touch screen control panel ⚙️ Additional equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Economical sludge extractor – 170 l/min 📍 Made in Poland – a local product with global capabilities. 💬 Contact us! We will gladly provide full technical documentation and prepare an individual offer. Custom dimensions and configurations available on request *(Sample images, offer applies to the device with 1.5x3m working area, 3-axis)*

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31015, pritisk: 5 letvica, priključek za stisnjen zrak: 5 letvica, obratovalni tlak: 5 letvica, skupna širina: 775 mm, skupna višina: 1.454 mm, skupna dolžina: 1.310 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 365 kg, vhodni tok: 16 A, vhodna napetost: 400 V, moč: 200 kW (271,92 KM), Oprema: dokumentacija / priročnik, Čistilni laser JETLASER M200, moč 200 W, širina žarka do 60 mm, laser se ne dotika površine. Dodatna oprema: 6 x zaščitna očala za laser, 15-metrski vlakenski kabel, mobilna laserska zaščitna zavesa, odsesovalna naprava 1,1 kW, rezervne leče 200 mm in 300 mm. Hodpfxozhwdys Afajp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 12.992 h, laserska moč: 80 W, potovalna razdalja osi X: 740 mm, pomik osi Y: 520 mm, skupna masa: 8.000 kg, število osi: 3, This 3-axis 4JET Pearl M fiber laser cutting machine was manufactured in 2020. It features a maximum laser power of 80 W and a footprint of 2400 x 2620 mm, making it suitable for diverse cutting applications. The machine is equipped with an ASD 300 extraction system and a variable control panel for enhanced operation. If you are looking for high-quality cutting capabilities, the 4JET Pearl M is a machine to consider, currently available for sale. Please contact us for further details. • Wavelength: 1064 nm • Laser power (max): 80 W • Measured laser power (max): 80 W • Pulse energy (max): 1.5 mJ • Voltage: 400 VAC (3P/N/PE) • Frequency: 50/60 Hz • Rated current: 63 A • Footprint: 2400 x 2620 mm • Total weight: approx. 8 t • Surface load: 2 t/m² • Point load: 1 t (8 ft) • Substrate holder sizes: 740 x 520 mm or 370 x 520 mm • Compressed air: 6 bar, average flow rate 35 l/min • Exhaust air (filtered): Filter class H13 • Included component: Variable control panel Additional Equipment • ASD 300 extraction unit • Spare parts package: Hodpfxjyzn A Ne Afaop • Mirror/mirror 25.4 mm (part no. 16149) – Qty: 3 pcs. • Lens/lens f=75 mm (part no. 16150) – Qty: 1 pc. • Objective/lens, f = -30 mm (part no. 16151) – Qty: 1 pc. • rhothor smart deflector with Y-mirror (part no. 16152) – For aperture 15 mm; SiC; wavelength 532 nm; Qty: 1 pc. • rhothor™ smart deflector with X-mirror (part no. 15444) – For aperture 15 mm; SiC; wavelength 532 nm; Qty: 1 pc. • Objective/lens f=100.0 mm (part no. 16153) – Qty: 1 pc. • Notch filter Ø25 mm (part no. 16154) – Qty: 1 pc. • Mirror/mirror Ø1" protected silver (part no. 16155) – Qty: 1 pc. • Mirror/mirror 2" HR532/45 PW2037C flat (part no. [missing]) – Qty: 3 pcs. • Beam expander (part no. 13487) – Qty: 1 pc. • F-Theta lens f 100 mm / F-Theta lens f 100 mm (part no. 15145) – Qty: 1 pc.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, Rated current: 12.5A, Peak current: 25A, Rated power: 8.65kW, Max. power: 17.3kW. Applications: laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions (X/Y/Z): approx. 1400mm/1400mm/2200mm, Weight: approx. 4000kg. Documentation available. Hjdpfxsucw Tvs Afajp