International Paystar 5000 nakup rabljenega (11.625)

Stanje: dober (rabljeno), Rabljeni Thetford International T3 preša za otpad. Isdohvi Ahspfx Adkjtd

Stanje: novo, Nova naprava MASS International Model NS1 Kotveni transporter / L-transportni trak / tekoči trak kratkoročna dobava nastavljiv kotni transporter NS1 z lovilnimi pločevinami v dovajalnem delu Primer kot na sliki: Dovajalni del: 600 mm Vzpenjalni del: 1300 mm Uporabna širina: 250 mm Zunanja širina: 305 mm (brez motorja) višinsko nastavljiva izhodna višina 750–1050 mm nastavljiv kot med dovajalnim in vzpenjalnim delom kot nastavljiv po želji Višina prečk: 30 mm Razmak prečk: 500 mm Hitrost traku: 3 m/min mobilen na vrtljivih zavornih kolesih Itedpouip Ilsfx Adksd tri-delne lijakaste pločevine za dovajalni del Navedena cena velja za model NS1. Drugi kotni transporterji v različnih dimenzijah na voljo po naročilu, glej seznam na sliki 2. Dimenzije po željah stranke niso težava.

Stanje: novo, New device Ijdpfx Adsu Ti Tvjkotd MASS International Color mixer / Batch mixer Mixer for plastic granulates Available for immediate delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel: 1250 mm) Mobile on lockable swivel castors Dual-side extraction port for suction lance, Additional discharge outlet at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for level monitoring Control via switch panel Intermittent and continuous mixing selectable Description: MV batch mixer for thorough mixing of the entire plastic granulate. Ideal for blending additional components, such as color masterbatch, additives, fillers, etc. Due to the forced guidance through the screw sleeve, the entire plastic granulate is set in motion within the mixer and mixes completely with the additional components in the shortest possible time. There are no "dead" corners that would remain unmixed, as is common with conventional screw or paddle mixers.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 3.590 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Shuttle systém Corrugator, ITIB MACHINERY INTERNATIONAL s.r.l. pro výrobu dvojstěnných vlnitých trubek z HDPE a PP, s vnějším vlnitým a vnitřním hladkým povrchem Popis zařízení: • Model: Corrugator F700 – shuttle systém Formy: 7 rozměrů formovacích bloků. Každý rozměr obsahuje 9 párů forem. Iodpfxjv E Nwds Adkjtd Vytlačovací hlava: 7 hlavic – každý rozměr má vlastní vytlačovací hlavu. Chladicí trny: 7 ks – každý rozměr má jeden chladicí trn pro třídu SN 8.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16/195245, natančnost ponavljanja: 0,025 mm, delovno območje: 3.660 mm, potovalna razdalja osi X: 3.660 mm, pomik osi Y: 1.830 mm, pomik po osi Z: 200 mm, natančnost pozicioniranja: 0,025 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 200 mm, dolžina mize: 4.000 mm, obratovalna hitrost: 212 mm/s, širina mize: 2.000 mm, pritisk: 6.000 letvica, hitrost pozicioniranja: 12.700 m/min, hitro pomikanje X-os: 12.700 m/min, hitri pomik os Y: 12.700 m/min, obratovalni tlak: 6.000 letvica, hitrost rezanja: 7.620 mm/min, največja hitrost vožnje: 12.700 mm/min, dolžina podajanja os X: 3.660 mm, dolžina pomika po osi Y: 1.830 mm, dolžina podajanja os Z: 200 mm, skupna širina: 21.000 mm, hitrost pomika os X: 12.700 m/min, hitrost podajanja osi Y: 12.700 m/min, tlak vode: 6.000 letvica, priključek za stisnjen zrak: 6 letvica, tlak črpalke: 6.000 letvica, višina izdelka (maks.): 200 mm, delovna dolžina: 3.660 mm, vhodna frekvenca: 50 Hz, moč: 75 kW (101,97 KM), nosilnost: 3.200 kg, globina grla: 21.000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – precision up to 0.025 mm. This Flow IFB is not an ordinary waterjet system. Equipped with 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top tier of waterjet cutting. Comparable new systems today cost over EUR 400,000. WHY THIS MACHINE WILL IMMEDIATELY BOOST YOUR PRODUCTION: - 87,000 PSI instead of the usual 60,000 PSI: That means 20–50% higher cutting speeds, 30–50% lower abrasive consumption, and significantly reduced per-part costs in daily operations. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. You achieve burr-free and taper-free edges at 2–4x the speed of conventional systems – with no secondary finishing required. - Ready for production after oil change: The system was in regular operation until August 2025. No years-long downtime, no hidden defects. Operating hours can be read directly from the controller during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control. Your operators know the system, spare parts and support are available long term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year of manufacture: 2007 Serial number: 2006353W-044 Cutting area: 1,830 x 3,660 mm Iodeyl S Nyjpfx Adkjtd Z-axis travel: 200 mm Table dimensions: 2,000 x 4,000 mm Table type: Grate table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5-axis (+/- 10 degrees articulation) Height sensor: Automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Control: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a workshop. All components are fully present. There is no visible damage or corrosion. An oil change is required before recommissioning. Operating hours can be read directly from the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Grate table with collection basin - Complete electrical cabinets - Palette of spare parts (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane for loading available on site. Inspection possible at any time by appointment.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Peristaltic pump Nord SK 180E, year of manufacture: 2016. 3) Sealing machine Miveg/MetalPack. 4) Water bath Bourgeat. 5) Air cushion machine FP International FMini PakR. Documentation is available. On-site inspection is possible. Iodowty Etepfx Adkjtd

Stanje: dober (rabljeno), Inox tank 5000 L with agitator and cooling system. Itedpfxovr E N Ns Adksd In good condition. Equipped with an integrated pipe around the tank for cooling purposes.

Stanje: novo, Novo naprava MASS International Kotnostni transporter NDS L Transportni trak/tekoči trak Kratkoročna dobavljivost Kotnostni transporter z nastavljivimi koti vključuje lopatičasti separator in zbirne plošče v dovodni enoti Primer kot je prikazano: Dovodni del 600 mm Vzpenjalni del 1300 mm Izhodni del 800 mm Uporabna širina 350 mm Zunanja širina 405 mm (brez motorja) višinsko nastavljiva izhodna višina 700 - 1000 mm nastavljivi koti za dovodni in izhodni del nastavljiv nagib PU trak Super Grip Hitrost traku 3 m/min vozljiv na vodljivih zavornih kolesih Ijdpfsr A D S Ejx Adkstd stranske zbirne plošče v dovodnem delu Lopatičasti separator je ločeno vodljiv in višinsko nastavljiv

Stanje: novo, Novo naprava MASS International Odkładni transportni trak NPS Transportni trak/odkładni trak Kratkoročno dobavljivo Odkładna površina brez stranske stene višinsko nastavljivo, premično na vrtljivih stop kolesih Primer: NPS 1 dolžina 1500 mm uporabna širina 250 mm zunanja širina 250 mm (brez motorja) odkładna površina brez stranske stene, zato polna uporabna širina višinsko nastavljiva oddajna višina 200 - 400 mm PU jermen gladek, črn Itjdpfx Ajizi S Dodkjd hitrost jermena 3 m/min transportni trak premičen na vrtljivih stop kolesih Navedena ponudbena cena velja za NPS1. Opcijsko: Mere po željah stranke pas primeren za živila (v skladu z FDA) spremenjena hitrost jermena frekvenčni pretvornik za brezstopenjsko nastavitev hitrosti jermena itd.

Stanje: novo, Novo naprava MASS International NS3 Speciale Kotast transportni trak s separatorjem Kratkoročno dobavljivo Primer kot na sliki: L-transportni trak z dvojnim valjčnim separatorjem Vhodni del 600 mm Vzpenjalni del 1300 mm Uporabna širina 450 mm Zunanja širina 505 mm (brez motorja) Višinsko nastavljiva izhodna višina 750 - 1050 mm Nastavljivi koti v vhodnem delu ter pri nagibu PU črn trak s prečkami Višina prečke 20 mm Razmak med prečkami 500 mm Hitrost traku 3 m / min Premično na vodljivih kolesc Stranske vstopne pločevine pri vhodnem delu Opcijsko na voljo tudi kot kotast transportni trak s super grip trakom in separatorjem (glej zadnji dve fotografiji) Dvojni valjčni separator s pokritim pogonom z jermenom Prevleka Super Grip Nastavljiv izmetni žleb Itsdpfxod Tidxs Adkod

Leto izdelave: 2015, stanje: rabljeno, TIMBER DRYING KILN NARDI INTERNATIONAL K 200 – 2015 For sale: Industrial timber drying kiln NARDI INTERNATIONAL K 200. The unit is in very good technical condition, complete and ready for operation. Equipped with the LEONARDO 3.0 control system and heat recovery system. — 1. Basic parameters Loading capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m Isdpfeygcw Dox Adkotd • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating capacity: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) — 2. Construction The chamber is made entirely of acid-resistant aluminium suitable for oak. Aluminium panels insulated with 140 mm glass wool. INOX (stainless steel) screws, elimination of thermal bridges. External cladding made of trapezoidal sheet metal with ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind resistance up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducting System significantly reduces energy consumption. — 5. Control system CE-compliant control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphical process visualisation • Control of up to 32 chambers — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 60,000 EUR / unit • Available: 2 units (2-chamber module) • Module price: 120,000 EUR • Sale only as a 2-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us by email or WhatsApp.

Leto izdelave: 2016, stanje: rabljeno, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2016 For sale: Industrial wood drying kiln NARDI INTERNATIONAL K 200. The kiln is in excellent technical condition and ready for operation. 1. Basic Specifications Load capacity: approx. 115 m³ Internal dimensions (usable): • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control system) ⸻ 2. Construction Chamber made entirely from aluminium resistant to oak acids. Aluminium panels with 140 mm glass wool insulation. INOX bolts, thermal bridge elimination. External sheathing made of trapezoidal sheet metal with ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 rated • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. ⸻ 4. Heat Recovery • Centrifugal fan • Dual heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. ⸻ Itodsygcwwspfx Adkjd 5. Control System CE control cabinet, IP55 rated. PC computer with LEONARDO 3.0 software (Windows 7). Possibilities: • Multi-stage program cycles, • Parameter archiving, • Graphic process visualisation, • Control of up to 32 kilns. ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature sensors • 2 EMC sensors • RCU module ⸻ 7. Commercial Information Availability & price: • Price: EUR 50,000 / unit • Available: 4 units (4-chamber module) • Module price: EUR 200,000 • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us by email or via WhatsApp.

Leto izdelave: 2016, stanje: rabljeno, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2016 The equipment is in very good technical condition, complete and ready for operation. Equipped with the LEONARDO 3.0 control system and a heat recovery system. — 1. Basic Specifications Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Ijdpfx Adsygcwksketd Power supply: • 400V / 50 Hz • 230V / 50 Hz (control system) — 2. Construction Chamber made entirely of aluminium resistant to oak acid corrosion. Aluminium panels with 140 mm glass wool insulation. INOX (stainless steel) screws, elimination of thermal bridges. External cladding made from trapezoidal sheet metal with ventilation channels. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h — 3. Air Circulation • 6 tunnel fans (fully reversible) • 4 kW motors, IP55 rating • High-temperature bearings • Individual inverters Provides uniform and energy-efficient drying. — 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. — 5. Control System CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Functionality: • Multi-step cycle programming • Parameter archiving • Graphical process visualisation • Control of up to 32 chambers — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC sensors • RCU module — 7. Commercial Information • Price: 50,000 EUR / unit • Available: 4 units (4-chamber module) • Module price: 200,000 EUR • Sale of complete module only • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Leto izdelave: 2021, stanje: rabljeno, For sale: industrial timber drying kiln NARDI INTERNATIONAL K 200, year of manufacture 2021. The kiln is fully operational and available for inspection (with the possibility of test operation). This offer refers to 1 unit from a modular drying system (5 units from 2021 available). NARDI INTERNATIONAL K 200 TIMBER DRYING KILN – 2015 For sale: industrial timber drying kiln NARDI INTERNATIONAL K 200. The unit is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. — 1. Technical Specifications Loading capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels with 140 mm glass wool insulation. INOX stainless steel screws eliminate thermal bridges. Exterior cladding: trapezoidal sheet metal with ventilation channels. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h — 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 protection • High-temperature bearings • Individual inverters Ensures uniform and energy-efficient drying. — 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • INOX acid-resistant ducting The system significantly reduces energy consumption. Itedpfx Adjygcwdskjd — 5. Control System CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • Multistage cycle programming • Parameter archiving • Graphic visualisation of process • Control of up to 32 kilns — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 72,000 EUR / unit • Available: 5 units (5-chamber module) • Sale only as a full 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us by e-mail or WhatsApp.

Stanje: rabljeno, Leto izdelave: 2013, Overview Iedowhk Dvepfx Adkstd This wire hood applicator was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale as production at the plant ceased in 2022. Operator platforms are included in the scope of delivery. Technical data - Capacity: 9,000 bph to 12,000 bph - Formats: Cork closures for cider and sparkling wine bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of delivery - Wire hood applicator - Operator platforms

Leto izdelave: 2021, stanje: rabljeno, For sale: NARDI INTERNATIONAL K 200 timber drying chamber / wood kiln (2021) The equipment is in very good technical condition, complete, and ready for operation. Equipped with the LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic parameters Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control system) ⸻ Iedpfx Asyf Uynsdketd 2. Construction Chamber made 100% from oak acid-resistant aluminium. Aluminium panels with 140 mm glass wool insulation. INOX bolts, minimizing thermal bridging. External cladding made of trapezoidal sheet with ventilation ducts. Structure resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air circulation • 6 tunnel fans (fully reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures even and energy-efficient drying. ⸻ 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. ⸻ 5. Control system CE-compliant, IP55 switchboard. PC with LEONARDO 3.0 software (Windows 7). Functions: • Multi-stage cycle programming • Archiving of parameters • Graphical process visualization • Control of up to 32 chambers ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ⸻ 7. Commercial information • Price: EUR 72,000 per unit • Available: 5 units (5-chamber module) • Sale only as a 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. Ijdpfx Aevu Syyedkjtd The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: novo, Leto izdelave: 2024, NDS 2 • Konstrukcija iz aluminijastih profilov • Nastavljiv kot/nagib • Dolžina poševnega dela: 1300 mm • Uporabna širina: 350 mm • Nakladalna dolžina: 600 mm • Separirna dolžina: 800 mm • Minimalna višina (H min): 600 mm Isdpjwktn Aefx Adketd • Maksimalna višina (H max): 1000 mm • Vključen separator z lopaticami

Stanje: novo, Leto izdelave: 2025, MEŠALNIK Mod. MV2 • Jeklena konstrukcija, zunanja površina pobarvana (RAL 9006) • Kapaciteta: 120 kg / 200 litrov • Kvadratni okvir: 700 x 700 mm • Nastavljiva višina: od 1085 mm do 1385 mm (od tal do nalagalne točke) Itedpjwktm Ejfx Adkod • Programabilna krmilna enota z gumbom za zaustavitev v sili (Stranka lahko izbira med ročnim načinom – neprekinjeno delovanje – in avtomatskim načinom – z nastavljivim časom delovanja in pavze) • Motor z reduktorjem: 0,5 KM / 0,37 kW, 220/380V, 50 Hz • Zgornja dvižna vrata s tečaji za nalaganje materiala z varnostnim mikro stikalom • Spodnja dvižna vrata za izpust materiala z varnostnim mikro stikalom • Stranske odprtine za priklop sesalne cevi • Okvir mešalnika na nastavljivih teleskopskih nogah z vrtljivimi kolesi z zavoro

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23A0017, premer struženja nad prečnim suportom: 520 mm, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 500 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 11.000 W, hitro pomikanje X-os: 18 m/min, hitri pomik na osi Z: 18 m/min, skupna višina: 1.890 mm, skupna širina: 1.620 mm, dolžina pomika po osi Y: 2.500 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC lathe with 45° slant bed - COGENTECH > Siemens 808D control system > Siemens motors > Linear guides > 6'' hydraulic chuck with 3 jaws Isdpovwbvpsfx Adkotd > 6-position electric turret

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 9.999 h, številka stroja/vozila: 0013, BERNARDI asfaltna mešalna naprava 100 t/h Iedeyhl Hdopfx Adkjtd 3 bitumenski rezervoarji Plinski grelnik Popolnoma mobilna na prikolicah Skladiščenje vroče zmesi: 60 t

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: Platinium GPC PDP Printer, Used IP Semi-Automatic Pad Printing System / Pad Printer IP Printing International Semi-Automatic Pad Printing Machine "Used for pad printing PIA on SONT-tubes and shaped products" Manufacturer: IP Printing International Belgium Itedpfxjw H Naas Adkjd Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Touch Panel Including pallet with tools and spare parts

Stanje: dober (rabljeno), Fronius interface Itodpfxjwbkf Tj Adkjd

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. Itjdswbknbopfx Adked ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! Ijdpfx Aewbh Ifsdketd ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.