Index Gu 1500 nakup rabljenega (140)

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) Pjdpfeuhantex Aafsrc - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, INDIVIDUÁLNE MODULY: 1. POLOAUTOMATICKÝ DEPALETIZÁTOR (model: Depal 512 – mini) na vykladanie sklenených fliaš z paliet; 1 operátor je potrebný na vloženie palety do zariadenia a odstránenie kartónu medzi vrstvami fliaš 2. UNIVERZÁLNY OPLACHOVACÍ STROJ (model: IND-Wash 56 S2) na parnú sanitáciu a oplachovanie fliaš horúcou vodou pred plnením 3. ROTÁČNÁ PLNIARENSKÁ LINKA (model: IND-Dose 46 PO-12) na stáčanie horúceho produktu do sklenených fliaš valcovitého tvaru 4. UZÁVEROVACÍ STROJ NA ZATVÁRANIE TWIST-OFF VIEČOK (model: IND-Close 12E) na vákuové uzatváranie naplnených fliaš pomocou parnej vákuovej technológie 5. PASSEURIZAČNÝ A CHLADIACI TUNEL (model: PT 42-9) na ďalšiu kontinuálnu pasterizáciu produktu Psdpow Hg Hqofx Aafsrc 6. VÁKUOVÝ TESTER (model: IND-Test 61) na kontrolu a vyraďovanie nesprávne uzavretých fliaš 7. SUŠIACI STROJ (model: IND-Blow 86) na odstránenie zvyšnej vlhkosti z povrchu fliaš pred aplikáciou etikiet 8. LINEÁRNA ETIKETOVAČKA NA SAMOLEPIACE ETIKETY (model: IND-Lab 32B) s možnosťou horného (cez viečko) a bočného označovania valcových fliaš 9. AUTOMATICKÝ ZOSKUPOVAČ A FÓLIOVAČ S TÁCKOU (model: IND-pack 29 T) na balenie fliaš do kartónových táck rôznych konfigurácií podľa veľkosti fliaš 10. SÚPRAVA DOPRAVNÍKOV S PLOCHÝM RETIAZKOVÝM PÁSOM (model: IND-Trans 71) na prepojenie jednotlivých modulov linky (doprava medzi oplachom, plnením a uzatváraním s hornými krytmi)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Index G220 CNC stružnica z rezkalno funkcijo Leto izdelave: 2018 (demonstracijski stroj) Predpow Tfanefx Aafjc Ponovno zagon: 2021 Krmiljenje: Siemens 840D Solution Line, malo obratovalnih ur Glavno vreteno D90 Protivreteno D90 Naprava za vpenjalni tlak 8 do 80 bar Zgornji nosilec orodja z motoriziranim rezkalnim vretenom HSK-T63 Osi X, Z, Y in B Nosilec orodja 2 z osmi X, Y, Z in revolversko glavo z 12 postajami VDI30 Izmenjevalec orodij z verižnim magazinom, dvovrstni nosilec, 2 x 50 HSK 63 Upravljanje orodij tipa "rezkalni stroj" z relativno D-številko Hladilna enota Samodejna delovna vrata Svetlobna pregrada za kontrolo pretrganja svedra 5-osna simultana obdelava za motorizirano rezkalno vreteno Sistem nadzora orodja na osnovi toka motorja Upravljanje orodij z nastavnim dialogom (maks. 250 orodij) Merjenje obdelovanca na glavnem ali protivretenski enoti Merilni cikli Dodatno konjišče za drugi prečni pomik Funkcija konjička v protivretenski enoti Elektronska gred Brusni cikli Transportni trak za odvod odrezkov Filter Hladilni sistem ECO-Fluid, 3 črpalke 3, 8, 20-80 bar UNIMAG4 Portalska snemalna naprava Transportni trak Brez vpenjalnih naprav, brez nosilcev orodij, prodaja z lokacije

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter: 60 mm Turning length: 200 mm Number of slides: Total power requirement: 20 kW Machine weight approx.: t Space requirement approx.: m Bore diameter: 30 mm, Control: INDEX C 200, Spindle speed: 7,500 rpm, Back-side machining, 3-jaw chuck, driven tools, Prsdpot Hw Atjfx Aafoc Workpiece loader: WHU 80

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, število vreten: 6, Premer palice (maks.): 22 mm, moč: 59 kW (80,22 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, 6-spindle machine up to Ø 22 mm Single NCU synchronization unit on position 6.1 rear-side machining on position 6.2 Prjdpswzlvaefx Aafsc pneumatic part ejection at spindle position 6 IEMCA Next – bar feeder CO₂ extinguishing system

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), X/Z travel: 520 mm / 200 mm, rapid traverse: 30 m/min, tool stations: 14, spindle speed: 7500 rpm / 6000 rpm, spindle bore: 30 mm, power: 10 kW, turning diameter: 200 mm, swing diameter: 260 mm, turning height: 200 mm. Machine dimensions X/Y/Z: approx. 3250 mm / 2100 mm / 2250 mm, weight: approx. 3200 kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Predpfxswp R U Ro Aafsc

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Maximum diameter: 18 mm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: Z axis CNC controlled - Slide unit 2.1: Z axis CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.3 EQUIPMENT - Siemens 840D CNC control - Counter spindle - Bar feeder magazine IEMCA SIR MS18/33 P Prodpfx Ajuhan Teafec - KNOLL coolant tank * with high-pressure pump - KNOLL chip conveyor - Part removal unit - Part ejector

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system SIEMENS SINUMERIC 840 C Total power requirement 40 kW Machine weight approx. 6,500 kg Space requirement approx. m I N D E X CNC lathe with 2 turrets, bar feeder and workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture 1998 #810 728 _____ Bar capacity approx. 42 mm Workpiece swing diameter approx. 400 mm Chuck diameter 200 mm Turning length / centre distance approx. 400 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 400 / 120 mm Turret slide travel Z2 (longitudinal) / X2 (cross) 400 / 105 mm Feed force for Z/X axis 15 Nm Rapid traverse speed, tool turret 1 & 2 22.5 m/min Turret tool stations / max. speed 14 x VDI 30 / 6,000 rpm Spindle speeds / tool speeds up to max. 7,000 rpm Maximum spindle torque 95 Nm Spindle drive / tool drive 20 / 5.5 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis contouring control, type SINUMERIC 840 C, for the following axes: Turret 1 and Turret 2, C-axis, sub-spindle axis and C-axis sub-spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand-held control unit, • C-axis for main spindle as well as automatic spindle switching and alignment device, • 1 sub-spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loader type MBL for bars up to 3 m in length • Hydraulic collet clamping device on main and sub-spindle • 2 x tool turrets with 14 stations for VDI 30 tool mounting and 14 powered tool positions for milling and drilling operations, various tool holders, drill breakage detection in the chuck area, ideal for cross-drilling (!) • Workpiece handling system type WHU with linear gripper but without storage system Prjdpfx Ast Hw Rksafsc • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system, • Driven angular tools, approx. 20 pcs. in total, etc. Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Maximum spindle speed: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changers: 2 x 14, Siemens control system. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Completely overhauled in 2016. Predpfx Aotdwwmoafec

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travel X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Load area travel X/Z: 110/90 mm - Number of tools: 8 - Number of driven tools: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg Predsuhbftepfx Aafoc - Installed power: 2.5 kW EQUIPMENT - CNC Siemens 840 (INDEX C200-4D) - C axis - Linear scale feedback on linear axes - Sub-spindle - 1 turning tool holder for counter-rotation operation - Coolant tank with pump - Chip conveyor

Stanje: rabljeno, Leto izdelave: 1995, Drehdurchmesser 300 mm Drehlänge 710 mm Steuerung SIEMENS SINUMERIC 840 Gesamtleistungsbedarf 40 kW Maschinengewicht ca. 6000 kg Raumbedarf ca. m I N D E X CNC-Drehmaschine mit 1 Revolver und Reitstock sowie CNC-Steuerung Typ C 200 - 4 SIEMENS Typ: G 300 Baujahr: 1995 Nr.: 5000 65 Hauptspindelbohrung: ca. 90 mm Werkstück-Umlauf-Ø: ca. 400(590) mm Dreh-Ø bei Futterarbeiten: ca. 300 mm Drehlänge / Spitzenweite: ca. 710 mm Verfahrweg Revolver-Schlitten Z1 (längs) / X1 (quer): 710 / 140 mm Eilganggeschwindigkeit Werkzeugträger 1: 20 m/min Werkzeugrevolver mit 12 Positionen für Werkzeughalter nach ISO/DIN 30 mm Vorschubkraft für Z-/X-Achse: 8/13 kN Spindeldrehzahlen / Werkzeugdrehzahlen stufenlos bis max.: 5.000 U/min Drehmoment an der Spindel bei 100% ED max.: 275 Nm Spindelantrieb / Werkzeugantrieb: ca. 28 kW Gesamtantrieb: ca. 40 kW - 400 V - 50 Hz Gewicht: ca. 6.000 kg Prjdpfst Hw Suex Aafec Zubehör / Sonderausstattung: • SIEMENS CNC-3-Achsen-Bahnsteuerung Typ SINUMERIC 840C bzw. INDEX C 200-4 für die Achsen: Revolver 1 = X/Z sowie C-Achse = Spindelorientierung. Steuerpult links schwenkbar angebaut • Ausricht- und Schalteinrichtung für die Hauptspindel • Hydraulisches 3-Backenfutter FORKHARDT KFD-HS 250 mit zahlreichen Spannbacken, max. 5.000 U/min • INDEX-Revolver mit 12 Werkzeugplätzen für DIN 30 Werkzeughalter, ca. 40 verschiedene Werkzeughalter als Zubehör, Vorbereitet für angetriebene Werkzeuge, Antrieb über Motor der Schalteinrichtung • Hydraulischer Reitstock mit Exzentrizitätskorrektur, Pinole 60 mm, über Fußschalter • KNOLL fahrbarer Späneförderer mit Kühlmitteleinrichtung und HD-Pumpe • Schiebetür vorne, ansonsten komplette Umhausung, Ölskimmer Ideal für Wellenbearbeitung oder Futterteile. Sehr stabile Ausführung!

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Prjdpfx Aajtdwwqefsc

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 6 - Number of turrets: 3 MAIN SPINDLE - Spindle drive power: 29 kW - Spindle speed: 6000 rpm - Max. bar diameter: 65 mm Pjdpeuhac Dsfx Aaferc - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 4.2 kW - Spindle speed: 4500 rpm - Minimum C-axis resolution: 0.001° - Travel: 280 mm LEFT UPPER TURRET - Number of positions: 5 - Tool type: VDI25 RIGHT UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Travel X/Z: 90/280 mm - Tool type: VDI25 - Driven tool speed: 4500 rpm - Driven tool power: 4.2 kW LEFT LOWER TURRET - Number of positions: 6 - Travel X/Z: 81/80 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 35 kW EQUIPMENT - Control: INDEX C200-4 - Coolant tank with high-pressure pump - Chip conveyor - Parts removal - Parts conveyor belt - Collet chuck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Spindle diameter: 30 mm, speed: 7,500 rpm, equipped with chip conveyor and base holder. Control system: Siemens Sinumerik 840 C. Length: 3,210 mm, width: 2,084 mm, height: 2,214 mm, weight: 3.2 t. An on-site inspection is possible. Prjdpfxoq A S Ats Aafec

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes NC-controlled Psdouhangspfx Aafjrc - Slide unit 1.2: fixed X-axis, Z-axis NC-controlled - Slide unit 2.1: fixed X-axis, Z-axis NC-controlled - Slide unit 2.2: X and Z axes NC-controlled - Slide unit 3.1: X and Z axes NC-controlled - Slide unit 3.2: fixed X-axis, Z-axis NC-controlled - Slide unit 4.1: X and Z axes NC-controlled - Slide unit 4.2: fixed X-axis, Z-axis NC-controlled - Slide unit 5.1: fixed X-axis, Z-axis NC-controlled - Slide unit 5.2: X and Z axes NC-controlled - Slide unit 6.1: X and Z axes NC-controlled - Slide unit 6.2: X and Z axes NC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil supply unit with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Workpiece ejection with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC control - Counter spindle Podpfx Aeuhar Esaforc - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/38 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts catcher - Parts ejector - Fire protection system: KRAFT UND BAUER * NOTE: Functionality not guaranteed. Inspection by a qualified company on the buyer’s side required.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of sub spindles: 2 - Sub spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT Pedpfx Aew Ah R Noaferc - CN Siemens 840D SL - 2 NCU - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA sub spindles - 2 workpiece collectors with conveyor belt - Chip removal device for bar remnants - INDEX bar guide - Bar feeder interface - Fire protection system

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS32P Prsdpswyfn Hofx Aafec

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22/29 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] - Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 16.5/19 [kW] - Spindle speed: 7,000 [rpm] - Max. bar capacity: 42 [mm] * Max. main spindle chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel distance: 500 [mm] - Rapid traverse speed: 60,000 [mm/min] - Distance spindle/sub spindle: 515 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X/Z: 70 / 250 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] RIGHT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel range X: 125 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 Podpfsu Uu H Rox Aaforc - Travel range X/Z: 70 / 400 [mm] - Travel range Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 68 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 5540 x 2910 [mm] - Machine weight: 5,500 [kg] MACHINE HOURS - Spindle hours: 25,000 [operating hours] EQUIPMENT - CNC control: INDEX C200-4D (based on Siemens) - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] * with paper filter * with rinsing gun * internal coolant supply (ICS): main and secondary - Chip conveyor: RIGHT - Spindle cooling - Parts catcher - Bar feeder: IEMCA BOSS 545 E - Driven tool holders: 6 - Static tool holders: 24

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Minimum C-axis resolution: 0.001° - Z travel: 445 mm TURRET 1 - Number of positions: 14 Pedpfou Hadhox Aafsrc - Number of driven positions: 14 - Travel X/Z: 105/400 mm - Travel Y: 120 mm - B-axis stroke: +90/-270° - Tool type: VDI 25 - Driven tools speed: 6000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4,975 x 2,890 mm - Machine height: 2,050 mm - Machine weight: 4,800 kg EQUIPMENT - Control: Siemens 840C - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal system - Parts conveyor belt - Bar feeder: LNS

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 11 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel path: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Min. B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Min. B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18,000 rpm Pjdpfx Aev Ig Aveafjrc - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts catcher

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 1 MAIN SPINDLE - Spindle nose: ISO 702/1-8 - Spindle drive power: 60 [kW] - Spindle speed: 3,500 [rpm] - Max. bar capacity: 102 [mm] - Max. turning diameter over bed: 560 [mm] - Max. main chuck diameter: 315 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK - Tailstock type: Numérique - Taper type: ISO 30 - Distance between centers: 1,400 [mm] - Adjustable pressure: via power monitoring TURNING-MILLING SPINDLE - Travel X/Z: 300 x 1,840 [mm] - Travel Y: 286 [mm] - B-axis stroke: 360 [degrees] - Minimum B-axis resolution: 0.001 [degrees] - Tool type: HSK63 - Spindle speed: 12,000 [rpm] - Spindle drive power: 27.5 [kW] TOOL CHANGER - Tool changer type: Parapluie Pedpfx Aaeuhalxjferc - Number of magazine tools: 2 x 40 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power rating: 100 [kVA] WEIGHT AND DIMENSIONS - Footprint: 5,460 x 2,560 [mm] - Machine height: 3,000 [mm] - Machine weight: 13,500 [kg] MACHINE HOURS - Power-on hours: 37,800 [h] - Turning-milling spindle hours: 7,891 [h] - Spindle hours: 9,137 [h] EQUIPMENT - Control: C200-4D (SIEMENS 840D Powerline) - Interface: RS232 / RJ45 - Coolant tank: 900 [l] * with high-pressure pump: 25 [bar] * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor: KNOLL - Oil mist extraction: BÜCHEL SH2000 PEV - Spindle coolant - Steady rest: SMW SLU3 Ø12-152, CNC positioned - 3-jaw chuck: SMW KNCS-N-315-91 - Number of milling tool holders: 72 - Number of turning tool holders: 12

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travel X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Worktable travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool holder type: Capto C4 - Dimensions: 1,700 x 3,000 x 2,400 mm Podpfx Aouhbgwoaforc - Weight: 4,000 kg - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC - C axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid feed rate: 50 m/min - Worktable strokes X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg - Installed power: 2.5 kW ACCESSORIES - Siemens 840D CNC control Predsuhbgdopfx Aafjc - C-axis

Stanje: rabljeno, TECHNICAL DATA - Spindle power: 10.5 kW - Spindle speed: 10,000 rpm - Spindle type: A2-4 - Travels X/Y/Z: 280/280/145 mm - Rapid traverse: 50 m/min - Table travel X/Z: 110/90 mm - Number of tools: 8 - Driven tool speed: 6,000 rpm - Driven tool power: 9.5 kW - Tool type: Capto C4 - Dimensions: 1700 x 3000 x 2400 mm - Weight: 4,000 kg Pjdpfx Aeuhbf Tjafjrc - Installed power: 2.5 kW EQUIPMENT - Siemens 840D CNC control - C axis