Hurco Bmc 24 nakup rabljenega (140)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, potovalna razdalja osi X: 760 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, proizvajalec krmilnikov: HURCO, model krmilnika: WINMAX GEN 5, skupna višina: 2.747 mm, širina mize: 1.020 mm, dolžina mize: 510 mm, obremenitev mize: 1.350 kg, skupna masa: 5.000 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 13.500 W, število mest v zalogovniku orodij: 40, teža orodja: 7.000 g, največja dolžina izdelka: 2.180 mm, število osi: 3, This 3-axis Hurco VMX 30i was manufactured in 2014. It features a working area of 760x510x610 mm, a table measuring 1020x510 mm, and a high-speed spindle with 12,000 rpm and SK40 taper. The machine is equipped with a 40-position tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking for a high-quality milling machine, you should consider the Hurco VMX 30i that we have for sale. Contact us for more information about this machine. • Table size: 1020x510 mm • Min-Max height under spindle: 150-760 mm • Tool changer capacity: 40 tools • In very good condition, used only in single-shift operation • Spindle hours: 8540 Additional equipment: • Chip conveyor • Renishaw tool and workpiece probes • CTS (40 bar) through-spindle coolant (incl. air) Kjdpox D Hu Hefx Adkoww • DXF software Dimensions: Machine depth: 2439 mm Technical Specification: Taper size: SK 40 Through-spindle coolant: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, skupna višina: 3.240 mm, skupna masa: 8.880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014 and features a robust table size of 59 x 26 inches with a maximum spindle speed of 12,000 rpm. It offers a tool capacity of 40 tools and a fast tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining, it supports a maximum table load of 4,410 lbs. If you’re looking for high-quality milling capabilities, consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table size: 1500 x 660 mm • T-slots: 6 x 18 mm • Maximum table load: 2,000 kg • Spindle nose to table: 101 mm • Maximum spindle speed: 12,000 rpm • Spindle power (15 min/continuous): 15 kW / 11 kW at 720 rpm • Spindle torque (15 min/continuous): 198.9 Nm / 116.7 Nm @ 720 rpm Kwedpsx D E Eqjfx Adksw • Tool type: CAT 40 / Big Plus® • Tool capacity: 40 • Maximum tool diameter: 76 mm • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Tool-to-tool ATC time: 2 seconds Dimensions Machine depth: 5,055 mm

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Machining Center Hurco VM 1 Maximum spindle speed: 8,000 rpm Kjdpei E Iacofx Adkoww Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle operating hours: 2,000 Comes with complete software options: DXF, thread cutting without chuck Includes various tools, Hilma vice, and drawer cabinet with tools

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, The machining center has been inspected by a Hurco technician and declared fully functional without any faults. Kwsdpox Iikbjfx Adkew Technical specifications - Travel: X-axis 1,270 mm, Y-axis 600 mm, Z-axis 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40, Type B - Feed speed: up to 23 m/min Worktable: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control system: - Hurco Ultimax 4, incl. software for milling simulation - Electronic hand control panel - Interfaces: RS 232C / V24 - 2 monitors for text and graphic editing - 2 software units for plain text and ISO programming Machine construction: - High rigidity, also suitable for roughing Tool changer: - Double-arm gripper with 24 stations Equipment: - Cooling unit for milling spindle - Flushing system for chip removal - Splash guard enclosure - Coolant system with filtration - Internal coolant supply (ICS) 20 bar - Chip conveyor Machine data: - Required floor space (excluding service areas) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400 V, 50/60 Hz A viewing of the machine can be arranged by appointment. All tools and operating equipment shown in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Control: WIMNAX V09 (DSM) Table dimensions: 2184 x 865 mm T-slot in table: 7 x 18 x 125 mm Maximum table load: 2268 kg X travel: 2134 mm Y travel: 864 mm Z travel: 762 mm Kwodpfx Adepiaqxoksw Spindle speed: 12,000 rpm Drive power: 18 kW Tool holder: SK40 ATC magazine: 40 positions Max. tool diameter: 74.9 mm Max. tool length: 300 mm Max. tool weight: 7 kg Rapid traverse X/Y/Z: 18, 18, 13.5 m/min Weight: 17,000 kg Dimensions (LxWxH): 7570 x 4450 x 3260 mm Accessories / Equipment: - Coolant system - DXF, NCPP, ISNC, Herical, Synchronous high-speed cutting, pocket/islands options - Internal coolant supply, 20 bar - Spindle cooler - Chip conveyor - Manuals Very good condition. Available for immediate sale. The tools shown are not included in the scope of delivery.

Stanje: rabljeno, Leto izdelave: 2007, Manufacturer: HURCO Model: VMX 50 Year of manufacture: 2007 Control unit: ULTIMAX Machine weight approx.: 10 t Tool holder: SK40 X-axis travel: 1,270 mm Y-axis travel: 660 mm Z-axis travel: 610 mm Spindle speed range: 10,000 rpm Table size: 1,500 x 660 mm Kedpotpczxjfx Adksww Number of tools in magazine: 40 pcs

Stanje: dober (rabljeno), Leto izdelave: 2012, moč: 0,018 kW (0,02 KM), potovalna razdalja osi X: 1.067 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, vrtljajska hitrost (min.): 12.000 obr/min, Hurco Machining Center V 42 T 3-axis technology Travel range in X: 1067 mm Travel range in Y: 610 mm Kwsdpfx Adjtxrbisksw Travel range in Z: 610 mm Table dimensions: 1270 x 610 mm Spindle speed: 12,000 rpm 40-position tool changer Chip conveyor Simulation graphics Tool and material library Pocket milling with island Synchronous tapping without floating chuck WinMax control ICS high-pressure through-spindle coolant

Stanje: rabljeno, Leto izdelave: 2010, Premer struženja nad ležiščem: 316 mm Dolžina struženja: 340 mm Krmiljenje: ultimax Hurco Premer struženja nad vozičkom: 240 mm Obhodni premer: 402,5 mm Vretena hitrost - brezstopenjsko: 0-6000 obr/min Vrtina vretena: 45 mm Pomiki: 0-30 m/min Obratovalna napetost: 400 V Priključna moč: 14 kW Prehod sani: 185 mm Kwedpeydqpiefx Adksw Prehod vzdolžni: 340 mm Prostorske zahteve pribl.: 3,76 x 2,92 x 2,15 m Premer vpenjanja VDI: 20 mm Glavni pogonski motor: 11,5 kW Teža stroja pribl.: 3,2 t Z 12-pozicijsko revolversko glavo in podajalnikom palic.

Stanje: dober (rabljeno), Leto izdelave: 2007, No longer required in production. Parts have been discontinued. Kwodsumt D Hopfx Adkow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Hurco machining centre VM 1, very good condition X-axis travel: 660 mm Y-axis travel: 355 mm Kedperxfxhefx Adksww Z-axis travel: 455 mm Control system: Ultimax Table clamping surface: 760 x 355 mm Maximum table load: 340 kg Tool magazine with 16 stations Tool holder: SK-A40 Spindle speeds: 10–10,000 rpm Spindle hours: [information missing] Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Proizvajalec: HURCO Tip: VMX30 Leto izdelave: 2007 Krmiljenje: WinMax Ksdjydd Skopfx Adkeww Vpenjalo orodja: SK 40 X-hod: 760 mm Y-hod: 510 mm Z-hod: 610 mm Obratovalno območje: 10.000 obr/min Največja obremenitev mize: pribl. 750 kg Velikost mize: 1.000 × 500 mm Število orodij v magazinu: 24 mest.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Proizvajalec: HURCO Tip: VMX42i Leto izdelave: 2019 Krmiljenje: Hurco WinMax Orodni vpenjalni sistem: SK40 Pomik X: 1.067 mm Kodpfx Aoyc Sn Rsdkoww Pomik Y: 610 mm Pomik Z: 610 mm Območje vrtljajev: 12.000 vrt/min Največja obremenitev mize: 1.000 kg Velikost mize: 1.270 × 610 mm Število orodij v magazinu: 24

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 1.625 mm, pomik osi Y: 860 mm, pomik po osi Z: 760 mm, največja hitrost vretena: 8.000 obr/min, Control: Ultimax 4 Kwjdjra Idhepfx Adkow Travel paths X/Y/Z: 1625/860/760 mm Spindle speed: 8000 rpm Tool magazine for 40 tools, SK 40 taper Internal coolant supply (IKZ) Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Control system Ultimax 4 Travel X/Y/Z: 760 x 510 x 610 mm Kwsdpfxst Rubbe Adkow Table size: 1020 x 510 mm Spindle speed: 12,500 rpm Tool magazine for 24 tools, SK 40

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 1.476 h, Funkcionalnost: popolnoma funkcionalen, Pozdravljeni, prodajamo stroj Hurco VM 30 i Plus. Pomiki osi: Os X: 1270 mm Os Y: 510 mm Os Z: 510 mm Krmiljenje Max5 Vpenjanje SK-A40 Kjdpoyhw Eaefx Adkoww Maksimalna hitrost vretena: 12.000 min⁻¹ Transportna teža: 4.550 kg Prodaja po naročilu stranke.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.450 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 300 mm, stružna dolžina: 525 mm, premer struženja: 356 mm, izvrtina vretena: 64 mm, največja hitrost vretena: 4.000 obr/min, Stroj v odličnem stanju. Leto proizvodnje: 2019. Specifikacija stroja TM8i Pomiki in delovno območje: Razdalja med konicami: 597 mm Premer nad posteljo: 525 mm Premer nad prečnim suportom: 300 mm Maksimalni premer struženja: 356 mm Maksimalna dolžina struženja: 525 mm Največji premer palice: 64 mm Pomik osi X / Z: 203 / 550 mm Vreteno: Največja hitrost vretena: 4000 vrt./min Največji navor (visoka prestava): 133,83 ft·lbs pri 1000 vrt./min (100,7 Nm pri 1000 vrt./min) Moč vretena: 25,48 KM (19 kW) Vpenjalni nos vretena: A2-6 Premer vpenjala: 210 mm Revolver: Tip orodij: diskovni z utori Kapaciteta: 12 pozicij Čas indeksiranja (sosednja pozicija): 1,3 s Čas indeksiranja (najbolj oddaljena pozicija): 3,6 s Pomiki: Hitri pomiki osi X/Z: 30 m/min Dimenzije: Največja površina postavitve: 4336 × 3114 mm Višina stroja: 2193 mm Kedpfx Aoyfhynodkjww Masa stroja: 4030 kg Mere vpenjalnega prijemala: 150 × 95 × 70 mm

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: X-axis travel: 1060 mm y-axis travel: 610 mm z-axis travel: 610 mm Control unit: Ultimax 4 Spindle speed: 10 – 10,000 rpm Kwsdpfx Adeu Iddnokew Tool holder: SK40 Tool magazine: Drum magazine with 24 slots Feed rate (XYZ): 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Machine dimensions approx. LxWxH: 2.82 x 3.2 x 2.7 m Chip conveyor dimensions LxWxH: 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard cabin Including cooling unit with IKZ 30 bar supply (size 1200x500x150mm), capacity for 340 litres Spindle with through-spindle coolant (IKZ) Scraper belt chip conveyor Control panel with two screens Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control has been set to disabled/off accordingly. i.D.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Na voljo je CNC rezkalni center z delilnikom Kitagawa NC 300. Hodi osi X/Y/Z: 1625mm/860mm/880mm, vpenjalna površina X/Y: 1650mm/900mm, območje vrtljajev: 25-8000 rpm, vpenjalo orodja: SK50, notranje dovajanje hladilne tekočine (IKZ), menjalec orodij s 32 mesti, pomik: 1-18000mm/min, CNC krmilje Ultimax 4, tloris X/Y: pribl. 4500mm/3700mm, teža stroja: pribl. 14500kg. Ogled možen po predhodnem dogovoru. Kwsdpeylnz Eefx Adkew

Stanje: dober (rabljeno), Leto izdelave: 2016, Größe des Tisches: 3000 x 1700 mm Kedpfowu Dlajx Adkjww Verfahrwege (X/Y/Z): 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase – Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Spindeldrehzahl: 6.000 min⁻¹ (U/min) Werkzeugwechsler: 40 Stationen (ATC) Steuerung: Hurco Winmax 5 Späneförderer

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2311151630, premer struženja nad prečnim suportom: 650 mm, izvrtina vretena: 153 mm, stružna dolžina: 3.150 mm, premer struženja: 650 mm, premer struženja nad ležiščem sani: 650 mm, premer struženja nad zgornjim sanežem: 410 mm, poteza s peresom: 150 mm, premer tulec: 100 mm, hitro pomikanje X-os: 13 m/min, hitri pomik na osi Z: 13 m/min, hitrost vretena (min.): 30 obr/min, največja hitrost vretena: 1.600 obr/min, višina osi nad prečnim suportom: 410 mm, dolžina podajanja os X: 330 mm, dolžina podajanja os Z: 3.150 mm, hitrost pomika os X: 2 m/min, hitrost podajanja os Z: 13 m/min, skupna dolžina: 6.261 mm, skupna širina: 3.588 mm, skupna višina: 2.375 mm, vrsta vhodnega toka: trifazni, moč vretenovega motorja: 18.000 W, skupna masa: 5.200 kg, vrtljajska hitrost (min.): 30 obr/min, največja hitrost vrtenja: 1.600 obr/min, vrtilni moment: 1.050 Nm, proizvajalec krmilnikov: Milltronics, model krmilnika: 9000 DGI, vhodna napetost: 230 V, premer izvrtalne vretena: 153 mm, nazivna (navidezna) moč: 21 kVA, število vreten: 1, nos vretena: A2-11, premer puše konjička: 100 mm, pritrditev tulec nasprotne konice: MK 5, Gib pinole konjička: 150 mm, število mest v zalogovniku orodij: 8, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, LIST PRICE of the machine: 149,500.00 EUR!!!!! The machine is BRAND NEW and available immediately. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating fluids to be provided by the buyer. Commissioning and training by Milltronics possible. Leasing options available (subject to credit approval). Machine details: · CNC control system Milltronics 9000-DGI · 15" LCD color touchscreen · Ethernet interface · USB interface · Productivity software: DSA, MSV, Bidirectional turning cycle, 9000-DGI Desktop · Connection for external keyboard · Electronic handwheels for manual operation, teaching, or automatic processes · Custom macros available · Override potentiometer for axes and spindle · Spindle load monitoring · Key switch for locking the EDIT function · Indicator lights for machine status · Additional "M" function with CNC wait channel · Constant cutting speed · Rigid tapping · Spindle speed 30 – 1600 rpm · Spindle motor 18 / 11 kW, 2-stage electronic gearbox · Spindle nose type A1-11 · 8-position tool turret, 25 mm · 1 axial tool holder for standard tools 25 mm x 25 mm · 1 tool holder for boring bars 38 mm · Automatic lubrication system · Full enclosure with sliding doors · Coolant system with pump · CE certification · Instruction manual, spare parts list, and circuit diagrams in digital format · Operating and maintenance manual in digital format · Transformer for standard industrial power supply 400 V, 3-phase · Lifting brackets for crane handling Optional accessories: Manual three-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic three-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Steady rest with rollers, range 20 – 200 mm Steady rest with rollers, range 180 – 410 mm Follow rest with brass pads, range 20 mm – 200 mm Kodpox Akm Rofx Adksww 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), A Hurco CNC 3-axis milling machine is available. Travel range X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, spindle speed: 10,000 rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10,500h. Documentation is available. An on-site inspection is possible. Kwjdpjw Dfg Dsfx Adkew

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 1270mm/660mm/610mm, spindle speed: 10,000 rpm, max. table load: 3,000 kg, spindle taper: CAT40, tool stations: 40. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9,000 kg, control: Ultimax. Documentation available. On-site inspection possible. Kwedpfx Adjuzyafekew

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Pomik X/Y/Z: 1060mm/610mm/610mm, dimenzije mize X/Y: pribl. 1270mm/610mm, največja obremenitev mize: 1100kg, moč vretena: 18kW, podajanje: 7600mm/min, hitri pomik: 30m/min, število mest za orodja: 24, orodni priključek: SK40, hitrost vrtenja: 12000obr/min, pozicijska natančnost: +/-0,01mm, ponovljivost: +/-0,005mm. Dimenzije stroja X/Y/Z: pribl. 450mm/3750mm/2800mm, teža: pribl. 6700kg, krmilje: Hurco Ultimax 4. Dokumentacija na voljo. Ogled na lokaciji je možen. Kwsdoyh Nvmjpfx Adkjw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 620 h, Pomiki X/Y/Z: 1630mm/860mm/760mm, hitrost vrtenja: 8000obr/min, navor: 142Nm, moč: 15kW, število orodnih mest: 40, maksimalni premer orodja: 75mm/127mm, maksimalna dolžina orodja: 300mm, maksimalna masa orodja: 10kg, mere mize X/Y: 1680mm/890mm, maksimalna obremenitev mize: 2700kg. Dimenzije stroja X/Y/Z: pribl. 6400mm/4400mm/3300mm, teža: pribl. 14500kg, krmiljenje: Hurco Ultimax 4, delovni čas: pribl. 621h. Dokumentacija na voljo. Ogled na lokaciji možen. Predvidoma na voljo od sredine 2026. Kodpew Dfhzsfx Adkjww

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 820 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, Oprema: transportni trak za ostružke, Splošno Krmilnik: Max 5 Letnik: 2023 Delovno območje Pomik X: 820 mm Pomik Y: 550 mm Pomik Z: 500 mm Pomik B: +110° / -110° Pomik C: 360° Menjalnik orodij: 60-kratni Hitri pomik X/Y/Z: 36 / 36 / 36 m/min Vreteno Število vrtljajev: 12.000 obr/min Moč: 16 kW Vpenjalni stožec: SK40 NC-rotacijska miza Miza – vpenjalna površina D x Š: 600 x 600 mm Razdalja vretena do mize: 150 – 650 mm Obremenitev mize: 350 kg Oprema Transporter za odrezke Sistem za dovod hladilne tekočine Direktni merilni sistem Zrak skozi vreteno 5-osna simultana obdelava Merjenje obdelovanca Kjdeyap Tfepfx Adksww Merjenje orodja Visokotlačno hlajenje (IKZ)