Hq 400 B nakup rabljenega (53.630)

Stanje: rabljeno, Leto izdelave: 2011, Decoiler Coil weight / load capacity: 4.5 t Maximum strip width: 520 mm Coil outside diameter: 1600 mm Expansion range: 460 - 530 mm Straightening unit Strip pass-through width: 20 - 400 mm Number of straightening rollers: 7 pcs. Diameter of straightening rollers: 60 mm Number of pinch rollers: 4 pcs. Diameter of pinch rollers: 60 mm Strip thickness: 0.4 - 3.5 mm Line speed: 2 - 10 m/min Roll feeder Maximum strip width: 310 mm Max. strip thickness: 3.0 mm Strip thickness at maximum width: 2.8 mm Strip thickness at maximum cross section: 850 mm² Number of feed rollers: 2 pcs. Diameter of feed rollers: 80 mm Maximum feed speed: 104 m/min Drive power: 1.5 kW Standard equipment: Coil loading station Effective stroke: 500 mm Load capacity: 5,000 kg Kwsdpfeuqfa Iox Adksw Max. strip width: 500 mm

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) Kwjdpoi Ri Dasfx Adkew 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Leto izdelave: 1969, stanje: rabljeno, Swivel bending machine Albert Stahl Type ABK 400 /5 Working length: 2530 mm Sheet thickness: 5 mm Kodoh Rkh Depfx Adksww

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, 1 used mitre band saw Make: Kasto Model: SBL 400 G Year of manufacture: 2002 Kjdpfxswuqbbs Adkeww Technical data: Length: 2,491 mm Width: 1,240 mm Height: 1,369 mm (bow down), 2,109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically regulated flow control Material clamping: manual Saw band dimensions: 5,090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical, via tensioning cross Saw band cleaning: by easily replaceable wire brush driven in proportion to the main drive. Coolant: Supplied via a coolant nozzle, tank volume approx. 50 l, pump output approx. 16 l/min. Cutting capacities in mm approx.: Mitre angle 0° (90°) 45° 60° Round 400 320 240 Square 320 x 320 320 x 320 220 x 220 Flat (W x H) 400 x 320 210 x 320

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Busch R5 RA 0400 B Vakuumska črpalka Proizvajalec: Busch Model: R5 RA0400 B Kwjdpfoycl Iqex Adkjw Leto izdelave: 2008 Napajanje: 400 V Kapaciteta olja: 12 l Vakuumska črpalka BUSCH R5 RA0400 B je rotacijska lopatična vakuumska črpalka z oljnim mazanjem, zasnovana za učinkovito in stabilno delovanje v različnih industrijskih aplikacijah, kot so odsesavanje zraka, vakuumsko pakiranje, tehnološki procesi, ki zahtevajo ustvarjanje podtlaka, ali podpora pnevmatskim procesom. Črpalke serije R5 odlikuje robustna in trpežna konstrukcija ter visoka zanesljivost. Naprava iz leta 2008 z napajanjem 400 V se široko uporablja v proizvodnih linijah, vakuumskih sistemih in industrijskih instalacijah, kjer je potrebna učinkovita in neprekinjena uporaba vakuumske črpalke.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 12/2014, dolžina tovornega prostora: 13.320 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.590 mm, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 / R22.5, medosna razdalja: 8.980 mm, barva: bela, Leto izdelave: 2014, Konfiguracija osi Dimenzije pnevmatik: 385 / 65 / R22.5 Znamka osi: BPW EcoPlus Zavore: Bobnaste zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Najv. obremenitev osi: 9.000 kg; Profil pnevmatike levo: 40 %; Profil pnevmatike desno: 40 % Zadnja os 2: Najv. obremenitev osi: 9.000 kg; Profil pnevmatike levo: 40 %; Profil pnevmatike desno: 40 % Zadnja os 3: Najv. obremenitev osi: 9.000 kg; Profil pnevmatike levo: 40 %; Profil pnevmatike desno: 40 % Teža Kwodpfx Adjyiywaskow Lastna teža: 8.849 kg Nosilnost: 32.151 kg Dovoljena skupna masa: 41.000 kg Funkcionalnost Znamka nadgradnje: Krone Cool Liner Thermo King SLX E 400 Hladilni agregat: Na dizel in elektriko (3.270 obratovalnih ur na dizel; 529 na elektriko) Debelina stene: 50 mm Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnično stanje: dobro Vizualno stanje: dobro Varnost proizvoda Proizvajalec: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Stanje: novo, Leto izdelave: 2026, Three-phase motor 400V with frequency inverter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard Features - Precision drive controlled via frequency inverter - Digital speed display - Infinitely variable blade speed - Balanced band wheels - Hard-rubberized running surfaces - Hardened and ground guide jaws - LED workstation light - Height-adjustable guide arm - Machine colour RAL 7005 / RAL 7035 - 12-month warranty for single-shift operation OPTION Article No. 410.020 Machine price €15,450 Incl. minimum quantity lubrication and longitudinal fence DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE! Kwsdpfxjir Ey Ie Adksw

Stanje: skoraj kot novo (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Stackable Box, Grade II Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Finish: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Kwedpfx Adshm Slleksw Weight: approx. 2.84 kg Additional data / information: Hole pattern: 117 Bottom + all four side walls with offset round perforations Round hole Ø: approx. 12 mm Spacing: approx. 14 mm center to center - With hand grip openings on both end faces - With beaded rim Please note: These are Grade II stackable boxes. Scratches, soiling or color defects may be present. General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be provided separately depending on the delivery location and scope. Our service overview: (Prices on request) Installation, Assembly Our general installation conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 80x stackable containers, grade II Manufacturer: SSI Schäfer Model: Traka 14-6 Material: Metal Finish: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Further data/information: Perforation pattern: 117 Base and all four side walls with offset circular perforations Hole diameter: approx. 12 mm Kwsdpfx Adshm Sltekjw Hole spacing (center-to-center): approx. 14 mm - With hand grips on both short sides - With folded rim Please note: These are grade II stackable containers. Scratches, soiling, or color defects may be present. General information about the item: This item is only available for collection. Delivery or shipping can be arranged at additional cost, which can be quoted upon request depending on the delivery location and scope. Our range of services at a glance: (Prices on request) Assembly and installation Our general assembly conditions apply. Racking inspection Racking inspection according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery: 05x stackable bins, second choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.840 kg Further data / information: Hole pattern: 117 Base and all 4 side walls with offset round perforations Hole diameter: approx. 12 mm Distance: approx. 14 mm center-to-center - with through-grip handles on both front sides - with crimped edge Please note: These are second-choice stackable bins. Scratches, soiling, or color defects may be present. General information about the item: This item is available for collection only. If transport or shipping is required, it will incur additional costs, which can be provided upon request depending on the delivery location and quantity. Overview of our services: (prices on request) Assembly, installation Please note our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included) Kodpfohm Slpox Adksww

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 400 mm Total width: approx. 220 mm Total depth: approx. 250 mm Number of boreholes: 03 pcs Borehole Ø: approx. 15 mm Material thickness: 6 mm Weight | per unit: 10.87 kg Note: L-brackets are welded on the sides. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Kodpfx Adsw Dy Ivekjww This item is only available for collection. Should transportation or shipping be required, this will incur additional costs, which can be provided upon request and will vary depending on the delivery location and scope of supply.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimensions: front half-side open, 275 x 82 mm (W x H) Handle: yes, single-sided, open Colour: blue Weight per unit: 1.59 kg Ksdpfx Aew E D Iisdksww General information about the item: This item is only offered for collection. If transport or shipping of this item is required, additional costs will apply. The exact charges can be provided upon request, depending on delivery location and quantity.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x stackable box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Weight: 0.62 kg | each Notes: The material is food-grade and made from polypropylene (PP). General information about the item: This item is available for collection only. Delivery or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location and the quantity required. Kjdpfx Adsw E Ixrskjww

Stanje: kot nova (razstavni stroj), vrsta vhodnega toka: Klimatska naprava, trajanje garancije: 6 meseci, vrsta hlajenja: voda, Process-controlled industrial welding machine, 4-roller wire feed motor, ideal for processing low and high-alloy materials as well as aluminum using TWIN-pulse and MIG brazing processes, with separate wire feeder in trolley. Highly economical—up to 30% faster than conventional machines, with minimal to no spatter formation. Easy handling, better visibility in the root area, and deeper penetration achieved through high plasma pressure. Features the innovative SPEEDPULS technology: high-speed pulsed arcs with top-quality results. Euro connection for operation of liquid-cooled torches. Kwedpfx Adoyhpkmskjw Technical data: Cooling type: Liquid-cooled Mains voltage: 400 V +/- 15% Connected load: 14.3 kVA Fuse protection: 32 A Adjustment range: 25 – 400 Amps Duty cycle: 60% at 350/400 Amps (40°C / 25°C) 100% at 320/350 Amps (40°C / 25°C) Wire feed speed: 0.1 – 25 m/min Wire diameter: 0.6 – 1.2 mm (steel) 0.6 – 1.6 mm (aluminum) Protection class: IP 23 Weight: approx. 127 kg Scope of delivery: Mains cable with CCE 32 A plug, operating manual, ZWP 10 m

Stanje: rabljeno, Conveyor, trough belt conveyor, trough conveyor, presumably GASUS type FB 400 x 5500 Belt conveyor, transport belt, conveyor belt Factory No.: F Year of manufacture: 1996 Usable length: 5.5 meters Belt width: 400 mm Return roller diameter: 225 mm Return roller width: 450 mm Belt speed: approx. 30 meters/minute Motor power: 1.5 kW Kedpfx Ashz U Azodksww Power connection: 400 Volt, 50 Hz - Drive via drum motor - Infeed hopper 600 x 400 mm - Carrying stations are 2-piece troughed - Metal carrying rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Robust tubular steel frame - Removable cover plate over conveyor belt - Suitable for horizontal or slightly inclined transport of bulk materials Overall dimensions (L x W x H): 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Stanje: rabljeno, prevoženi kilometri: 764.000 km, moč: 294 kW (399,73 KM), prva registracija: 04/2019, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 52 m³, dolžina tovornega prostora: 8.250 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.500 mm, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, Iveco Stralis 400 Refrigerated Box Carrier Retarder Tail Lift Euro 6 Ref. No. for enquiries: 1125886 * Condition: Very good * Power: 400 HP / 294 kW * Displacement: 8,710 cm³ * Retarder * ABS * EBS * Rear axle differential lock * Emission standard: EURO 6 * Electrically adjustable and heated exterior mirrors * Electric windows * Driver’s comfort seat with air suspension * CD radio * Transparent sun visor Kwedpfxexzwahj Adksw * Roof spoiler * Side stowage box / plastic, right side * Work lights Tail lift: Bär, load capacity up to max. 1,500 kg Body: Refrigerated box * Body manufacturer: Lamberet * Refrigeration unit: Carrier Supra 1250 Mt° Loading area dimensions: Length: 8,250 mm; Width: 2,500 mm; Height: 2,500 mm Tyres: Front axle: 315/70 R22.5 leaf suspension / 35% Rear axle: 315/70 R22.5 air suspension / 45% ---Price: €23,900 + 19% VAT For further questions, you can contact us at the following numbers: * We speak: German, English, French and ???? Errors, omissions and prior sale subject to change.

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats. Kwsdpfxjhu U Nxe Adksw PC control type: ICOS OPEN CNC – IMAWOP software. Worktable: console table (No. 8 console tables, each 1400 mm). Console tables with LED / diode light strips. Automatic tool change system (magazine – 18 tool positions). Working area (X-Y-Z): 4000 x 2100 x 300 mm. Working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. of working zones: 2. Vacuum pump / capacity (m³/h): 140. Chip conveyor. Separate electrical and control cabinets. Total connected load (kW): 32. Working units (top): - 21 independent vertical drilling spindles (4 x 1.2 kW) - 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edge banding unit (hot melt glue) VT 100. Edge material (rolls): thickness (min/max): 0.4 / 3 mm. Edge magazine for rolls (2 compartments). OPTIONS: - Saw unit, max diameter 200 mm. - Combination unit (flush milling & profile scraper). - Drilling head (with 4 horizontal drilling spindles).

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: E7BMEDB000, Električni namizni bain-marie 400 mm Mod.: E7BMEDB000 Datum nakupa: 2021/ teden 47 Kwedpfx Adjxgpixekjw Dimenzije (ŠxGxV): 400 x 730 x 250 mm Proizvajalec: Electrolux Električna vodna kopel GN 1/1, namizna naprava S pokrovno ploščo debeline 1,5 mm iz CrNi jekla 1.4301, sprednja, zadnja in stranska obloga iz CrNi jekla 1.4301 s Scotch-Brite obdelavo Priključna moč: 1,5 kW/ 230 V/ 50/60 Hz/ 1N Teža: 20 kg Korito: 306x510x156 mm, primerno za posode GN 1/1 do globine 150 mm Temperaturno območje: 30-90°C

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions Kwjdpfx Aow A Ruqjdkew No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Leto izdelave: 1969, stanje: dober (rabljeno), Steel chain hoist type T 302, 400 Volt, 2 lifting speeds, chain length 3 meters Kwsdpfxod E Akke Adkew

Stanje: rabljeno, lastna masa: 8.681 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, Oprema: ABS, | Schmitz hladilna polprikolica S3B | TK SLXe 400 hladilna enota | Dvojno nadstropje brez nosilcev – nosilci na voljo na zahtevo | Škatla za palete | Notranja širina 2,49 m | Notranja višina 2,69 m | Schmitz osi z disk zavorami | Nosilec za rezervno kolo, orodjarna | Dizelske ure: 28.394 h | Pridržujemo si pravico do napak, tipkarskih napak in predhodne prodaje. Kwsdpfx Ajxdn Hqjdkew

Stanje: skoraj kot novo (rabljeno), FRONIUS TPS 4000 ROBOTER-SET Mehrere Einheiten ständig lagernd, in verschiedenen Ausführungen und Konfigurationen. Die angegebenen Preise verstehen sich ab ... Euro. Preisangebote werden individuell nach Geräteausstattung erstellt. • Fronius Stromquelle (TPS 4000) • Fronius Kühlgerät (FK 4000) Kjdohpzunopfx Adkoww • Fronius Drahtvorschubgerät • Fronius Zwischenschlauchpaket • Fronius Fahrwagen • Fronius Schlauchpaket • Fronius RCU 5000i • Interface: INTERBUS RUGGED LINE (Optional erhältlich: Profibus + 800 Euro oder DeviceNet + 1.400 Euro) Listen-Neupreis beim Hersteller: ca. 14.000 Euro netto Unser Preis: 5.990 Euro netto (Mehrwertsteuer ausweisbar). Händlerrechnung vorhanden. Beispielbilder zeigen Mustergeräte. Lagerstandort: 1230 Wien (Vienna) Versand auf Palette gegen Aufpreis möglich: Österreich ca. 130 Euro Deutschland ca. 180 Euro Europa auf Anfrage

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, FRONIUS TPS 4000 ROBOTIC SET - Fronius power source (TPS 4000) - Fronius cooling unit (FK 4000) - Fronius wire feeder - Fronius intermediate hose package - Fronius transport cart - Fronius hose package - Fronius RCU 5000i - Interface = INTERBUS RUGGED LINE (Optional available: Profibus + €800 or Devicenet + €1,400; other interfaces on request) List price from the manufacturer: approx. €14,000 net Our price: €5,990 net – VAT deductible – dealer invoice provided. Ksdpfx Aewbi E Sedkoww We always have several units in stock in various configurations. We are happy to respond to your inquiries. The prices quoted start from ... Euro. Prices/offers are created individually depending on device configuration. Sample images of devices. Stocked in Vienna 1230 (Vienna) Shipment on pallet possible for an additional charge: Austria approx. €180 Germany approx. €210 Europe on request

Stanje: novo, Drilling capacity in steel (diameter): 25.0 mm Throat depth: 180 mm Drilling stroke: 80.0 mm Morse taper: 2 MT Speed range: 180 - 2270 rpm Table size: 305 x 305 mm tiltable +/- 45 degrees T-slots: 16.0 mm Column diameter: 72.0 mm Operating voltage: 400 V Total power requirement: 1.10 kW Weight: 57.0 kg Dimensions (L x W x H): 400 x 630 x 990 mm Description: - Equipped as standard with digital quill stroke display and work light Kedpfx Ajxaa Thodksww - High running smoothness thanks to cast iron pulleys - High-quality ball bearings ensure excellent concentricity of the quill - Large-size drill table with diagonally arranged T-slots - Drill table tiltable (± 45°), height adjustment via rack and pinion - Rotation direction switch for forward and reverse - Powerful and high-torque aluminium motor to IP 54 - Precision quick-action drill chuck included - Supplied as standard with T-slots in the ground base plate - Ergonomic handles for comfortable operation Scope of delivery: - Quick-action drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 2 / B 18 - Digital quill stroke display - Machine work light - Forward/reverse rotation - Safety cover - Height-adjustable safety cover - T-slot nuts - Operating tools

Stanje: rabljeno, prevoženi kilometri: 228.400 km, moč: 130 kW (176,75 KM), prva registracija: 11/2006, vrsta goriva: dizel, skupna masa: 12.500 kg, konfiguracija osi: 2 osi, barva: oranžna, vrsta prenosa: polavtomatski, emisijski razred: Euro 4, Oprema: klimatska naprava, pogon na vsa štiri kolesa, * Mercedes Unimog U400 4x4 * 3-stranski prekucnik * Pogon na vsa štiri kolesa Kodpfx Adoqcriuskeww * Menjalnik z dvojno redukcijo * Dvojni stranski odgon (velik in majhen) * Zadnji hidravlični sistem * Oprema za snežni plug * Sprednji izhod za kardansko gred * Polavtomatski menjalnik * VIN: WDB4051031V211726 * Tip motorja: 900916 * KW: 130 * Euro 4 * Delovna prostornina: 4249 ccm * Lastna masa: 6540 kg * Skupna masa: 12500 kg * Sattellast: 1000 kg * Dovoljena priklopna masa: 18700 kg * Medosna razdalja: 3080 mm * Dolžina prekucnika: 2,40 m * Širina prekucnika: 2,15 m * Dolžina vozila: 5150 mm * Širina vozila: 2330 mm * Višina vozila: 3070 mm * Pnevmatske gume: 385 / 65 R 22,5 * Cena brez DDV * Vse informacije brez garancije Tel./WhatsApp: