Holzkraft Kgz 3050 nakup rabljenega (163)

Stanje: novo, - NEW - - Cutting level directly at the saw blade - Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life - Precision-guided aluminium format sliding table, anodized as standard - 10-year HOLZKRAFT warranty against wear of the guide rails on the sliding table - Standard parallel fence with round bar guide and fine adjustment - Large work table made of milled cast iron - Smooth operation and precise cuts - Standard table extension and width extension make handling larger workpieces easy - Extendable aluminium telescopic fence with angle adjustment and two professional flip stops - Made in Italy TECHNICAL DATA Dimensions and weights Weight (net) approx. 295 kg Gjdpfovyup Uox Aa Usug Dust extraction connection Extraction port diameter 120 mm Saw blade guard extraction port diameter 60 mm Installation information Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Required space length 3860 mm Required space width/depth 2750 mm Required space explanation Dimensions consider maximum travel or usable lengths Working area length 1000 mm Working area width/depth 2000 mm Working area explanation Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Rated duty type drive motor S 6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 1600 mm Format sliding table width 270 mm Format sliding table height 124 mm Table length 1020 mm Table width 325 mm Table height 860 mm Circular saw unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 1660 mm Edging length 1600 mm Saw blade tilt 90 - 45° Max. cutting height 90° 100 mm Max. cutting height 45° 79 mm Saw blade diameter 315 mm Saw blade speed 4000 rpm FEATURES Anodized aluminium format sliding table Handle for sliding table Squaring frame Saw parallel fence with round bar guide Stops: Two professional flip stops Squaring shoe Eccentric clamp Table width extension Table length extension Saw blade guard hood

Stanje: novo, Bandsaw HOLZKRAFT HBS 433 - Demonstration machine - Upper saw blade guide, Lower saw blade guide, Quick-release tensioning device via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm, Max. cutting height: 270 mm, Gsdpfxju R S Ako Aa Usug Max. cutting width with fence: 370 mm, Max. cutting width without fence: 410 mm, Max. blade length: 3,345 mm, Table size: 610 x 431 mm, Table tilt: -10 to +45 °, Motor 400 V: 1.5 kW, Extraction port diameter: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 bandsaw blades (6 / 16 / 25 mm) - new demonstration machine -

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Godpjd Hx Hmefx Aa Uoug Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Gjdpjih Dwvefx Aa Uoug Telescopic fence Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Description Surface and Thickness Planer with TERSA Quick-Change Cutter System - Equipped with TERSA cutter block for lightning-fast knife changes - TERSA cutter system ensures particularly quiet operation - Helically toothed steel infeed roller for consistent and even feed of timber - Exceptionally long, one-piece surfacing tables for easy planing of workpieces - Large planing fence remains in position when opening the surfacing tables - Surfacing tables open towards the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Special Features - Work tables made of stress-relieved cast iron, guaranteeing lasting flatness and high resistance to distortion - Table lips ensure silent operation Equipment Details TERSA Cutter Block - No more adjustments or screwing required - Knife replacement in seconds - Self-locking - Exceptionally quiet - Perfect planing result Extraction Hose Connection - Both surfacing and thicknessing extraction ports face the same direction - Hose connects from one side only; no need for a hose to run around the machine Guodpfx Aaju Diwls Ujg Drive System - Rugged chain drive - Drive wheels made of steel - Heavy-duty cast iron bearing mounts Planing Mechanism - Heavy anti-kickback fingers prevent workpiece kickback - 3-knife TERSA cutter block ensures optimal planing finish Material Feed - Helically serrated steel feed rollers guarantee a consistent, even material feed with no impressions - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data Surfacing table overall length: 1510 mm Surfacing working width: 300 mm Surfacing depth of cut, max: 4 mm Thicknessing table dimensions: 565 x 300 mm Thicknessing working height, min: 3 mm Thicknessing working height, max: 230 mm Thicknesser feed speed: 7 m/min Cutter block speed: 5200 rpm Cutter block diameter: 72 mm Number of knives: 3 pcs. Electrical connection: 400 V Motor power: 4.0 kW Extraction port diameter: 2 x 120 mm Weight: 270 kg Long-hole mortising unit (optional): Table size 470 x 220 mm Long-hole mortising unit travel, cross/longitudinal: 160 mm / 110 mm Long-hole mortising unit vertical travel: 120 mm Scope of Delivery & Equipment - TERSA cutter block - Anodized aluminium planing fence

Stanje: novo, - NEW - Brand: Holzkraft Model: HBS 533 SET Godpfxsvwgame Aa Ujug - Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing and robust steel sheet base - Large one-piece cast iron saw table with precisely ground and polished surface - Convenient laser device for cutting line marking - Quick-release blade tensioning via eccentric lever at the rear of the machine - Standard two-speed operation - Precision 3-roller blade guides above and below - Fast cutting height adjustment via rotary knob and rack with millimeter scale - Smooth-running aluminum parallel fence with eccentric quick-clamping and magnifier - Standard miter gauge adjustable by 60° to both sides - Safety switch for automatic shut-off when the door is opened Technical data: Work table dimensions: 680 x 530 mm Cutting speeds: 850/430 m/min Flywheel diameter: 530 mm Max. cutting height: 270 mm Max. cutting width with fence: 474 mm Max. cutting width without fence: 514 mm Blade length: 3865 mm Precision guidance: 3 rollers above / below Table tilt: -10 to +45 ° Motor power: 400 V / 50 Hz / P2 2.25 kW Weight: 163 kg Dimensions: 1024 x 793 x 2048 mm Extraction port diameter: 2 x 100 mm Scope of delivery: 1 set of saw blades, length 3865 mm, 3 pcs Item no.: 5155303SET Location: 97447 Gerolzhofen

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Gsdpfxsvwga Ho Aa Usug Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - NEW - DESCRIPTION - Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing and a robust sheet steel base - Cast iron saw table with precisely ground and polished surface - Convenient laser unit for cutting line marking - Quick-release saw blade tensioning via an eccentric lever at the rear of the machine - Equipped with two speeds as standard - Precision 3-roller saw blade guides, standard on both top and bottom - Fast cutting height adjustment via rotary knob and rack with millimeter scale - Smooth-gliding aluminum parallel fence with quick eccentric clamping and magnifier - Standard mitre gauge, adjustable ±60° - Safety switch for automatic shut-off when the door is opened TECHNICAL DATA Dimensions & Weights - Length (product): approx. 1020 mm - Width/Depth (product): approx. 850 mm - Height (product): approx. 1982 mm Extraction Connection - Extraction port diameter: 2 x 120 mm Work Table(s) - Work table length: 535 mm - Work table width: 535 mm - Work table height: 945 mm - Max. work table length: 685 mm - Work table extension length: 535 mm - Work table extension width: 150 mm Gujdpfsvxr Nvex Aa Uog - Work table tilt: -10° to 45° - Note on work table tilt: For safety reasons, a stopper or support device must be installed from 20°, to prevent the workpiece from slipping! Electrical Data - Connection voltage: 400 V - Mains frequency: 50 Hz - Output power: 2.25 kW Cutting Capacities - Max. cutting height 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm Saw Blade - Saw blade speeds: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw blade length: 3865 mm - Max. saw blade length: 3872 mm - Saw blade guide: Precision guide top and bottom SCOPE OF DELIVERY - Mitre gauge ±60° - Laser unit for cut line marking Item no.: 5155303

Stanje: novo, - NEW - - With TERSA cutterhead for changing planer blades in seconds - TERSA planer knife system ensures particularly quiet operation - Helically grooved steel feed roller for consistent and even wood feed - Exceptionally long, one-piece surfacing tables enable easy dressing of workpieces - Large planer fence remains in position when surfacing tables are opened - Surfacing tables open to the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction - Work tables are made of cast iron, annealed and stress-relieved, making them dimensionally stable and permanently flat - Table lips for quiet operation Features TERSA Cutterhead - No more setting or screwing - Change planer blades in seconds - Self-locking - Particularly quiet - Perfect planing results Chip Extraction Hose Connection - Extraction ports for surfacer and thicknesser are oriented in the same direction - Hose connection from one side only - No hose required to wrap around the machine Drive System - Sturdy chain drive - Drive wheels made of steel - Solid cast iron bearing pedestal Planing Unit Gujdpfx Aovwgaaja Ujg - Massive anti-kickback fingers prevent kickback of workpieces - TERSA cutterhead with three knives ensures optimum planing finish Material Feed - Helically grooved steel infeed rollers for consistent and even material feed without marks - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data: Length approx. 1,725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Max. surfacing depth 4 mm Extraction port diameter (thicknesser) 2 x 120 mm Min. working height (thicknesser) 3 mm Max. working height (thicknesser) 230 mm Max. thicknessing depth 4 mm Drive motor power 4 kW Connection voltage 400 V Mains frequency 50 Hz Cutterhead type TERSA Number of planer knives 3 pcs. Speed 5,200 rpm Max. planing width 300 mm Feed speed 7 m/min Item No. 5503031 Stock location: 97447 Gerolzhofen - ex works, loaded free of charge -

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Gsdpfjd Hx Hnjx Aa Ujug Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: novo, - Heavy-duty profile design with high own weight for maximum running smoothness - Smooth and precise operation thanks to torsion-resistant machine housing - Large, one-piece grey cast iron saw table, tiltable from 0° to +45°, with ground and polished surface - Large cast iron parallel fence - Fast and precise cutting height adjustment via handwheel and rack with millimeter scale - Supplied as standard with mitre gauge - Precision 3-roller saw blade guide with upper and lower guide rollers, with fine adjustment - Eccentric quick-release lever. The basic tension setting is not changed; integrated saw blade tension indicator - The saw table is mounted on a double pivot support, allowing simple and quick locking of the set tilt angle via quick clamping - Eccentric quick-release lever - Basic tension setting is not changed - With integrated saw blade tension indicator Godpfx Aaevwfbco Usug - The heavy-duty saw table made of cast iron is easily and conveniently adjusted via a handwheel-rack guide - Continuously adjustable tilt from 0° to 45° - Simple and quick locking of the set tilt angle via quick clamping Technical data: Work table dimensions: 750 x 530 mm Cutting speed: 1400 m/min Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Saw blade length: 4190 mm Precision guide above/below Saw table tilt: 0° - +45° With rack and handwheel Motor power: 400 V/50 Hz/P2 3.75 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 mm Extraction port diameter: 2 x 100 mm Includes: 1 set of saw blades, length 4190 mm, set of 3 Item no. 515 5313 SET Location: 97447 Gerolzhofen

Stanje: novo, - New - Description: Gusdpfx Aevwfzisa Ueg - Vertical design for splitting short and meter-length wood - Robust and solid construction - Shock- and scratch-resistant thanks to high-quality powder coating - Quick, tool-free adjustment of splitting height - Low base plate for easy, ergonomic loading of large logs - Phase inverter included with all 400 V models - Convenient transport with manual tow bar, thanks to standard chassis with large pneumatic wheels and additional support wheel - Space-saving storage due to easily lowerable cylinder - Powerful industrial hydraulic system - Two-hand safety operation - With split wood holder Technical Data: Dimensions and Weights Length approx. 1,050 mm Width/Depth approx. 1,700 mm Height approx. 2,500 mm Weight approx. 373.1 kg Drive PTO speed 540 rpm Power intake 5.5 kW Electrical Data Connection voltage 400 V Line frequency 50 Hz Machine Data Max. splitting force 26.1 t Min. splitting length 560 mm Max. splitting length 1,100 mm Min. log diameter 80 mm Max. log diameter 400 mm Hydraulic System Hydraulic oil tank capacity 30 l Art.-No. 5981031

Stanje: novo, The work table is made of heavily ribbed grey cast iron, and the base frame is of welded steel, ensuring excellent torsional rigidity and vibration-free operation. High-quality machine at a true entry-level price. Unique in this performance class: - Sliding table made of anodised aluminium for maximum cutting precision - Cutting line directly at the saw blade - Saw blade unit tiltable from 90 to 45° - Table extension with aluminium crosscut fence and adjustable fence flap for panels and large workpieces - Rip fence with round bar guide and fine adjustment - Powerful motor - Made in Europe Dimensions and weights Weight (net): approx. 170 kg Dust Extraction Connection Extraction nozzle diameter: 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Gsdovxr S Rspfx Aa Ueug Transport width: 680 mm Working area: 1600 mm x 2300 mm Space required: 2613.5 mm x 2134 mm Please add the stated measurements to the required space in order to determine the recommended free installation area for the machine. Dimensions take into account maximum travel paths or usable lengths. Electrical Data Connection voltage: 400 V Drive motor: 1.8 kW Phase(s): 3 Rated duty cycle: S6 Current type: AC Duty cycle (drive motor): 40% Mains frequency: 50 Hz Sliding Table and Table Sliding table, format: 1140 mm x 200 mm x 70 mm Table: 1024 mm x 224 mm x 900 mm Circular Saw Unit Cutting width with rip fence: 700 mm Max. cutting height at 90°: 67 mm Max. crosscut width left of blade: 1200 mm Max. cutting height at 45°: 40 mm Edging length: 1200 mm Saw blade diameter: 250 mm Saw blade tilt: 90 - 45° Saw blade speed: 3900 rpm Scope of Delivery Table extension Anodised aluminium sliding table Rip fence with round bar guide and fine adjustment Aluminium flip stop Eccentric clamp Item no. 5504113

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display Guedpfx Ajd Hx Hpja Usg For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Gjdpfx Aecnw T Ioa Uoug Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder. Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside. High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm. Saw aggregate tilts from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the fence. Four spindle speeds. Spindle moulder with reversible rotation direction. Quick conversion to thicknesser thanks to parallely opening surface tables. 2-speed feed on thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Guodpfecnxa Sox Aa Ueg Includes separate rip fence and separate jointer fence. Equipped with lockable main switch. Equipment details: Crosscut fence Immediate control Outrigger table Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium Guides made of hardened and ground F550S steel, 15% harder than conventional steel Guides are riveted, not glued Smooth-running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guideways Cast iron dual trunnion saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to saw blade, supported on both sides Height and tilt adjustable up to 45° Scoring unit with separate 0.55 kW scoring motor as standard Dual trunnion spindle moulder unit Large dimensioned, tilting cast iron dual trunnion spindle moulder unit Spindle fence Heavy-duty professional version The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard 3-position for quick recall of settings Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Planer section Helical-toothed steel infeed rollers ensure consistent wood feed Massive anti-kickback devices prevent workpiece kickback 4-knife Tersa cutterblock for optimal planing results Table lips ensure quieter operation Tersa planer cutterblock No more setting or screwing Knife change in seconds Self-locking Extremely quiet operation Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions Special lifting device ensures table position is maintained precisely, even without locking Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Reversible aluminium fence ruler No gap in measurement, guide bars are overlapping Separate surface fence Large professional design (1800 x 150 mm) Tiltable 0-45° With quick adjustment Stable round bar guide made of ground steel Simultaneous opening Art. no.: 5500557

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Gjdpfx Aaohp Rdlj Uoug Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Gusdpfx Aaocnw U Ds Ujg Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Gjdpfscnxaysx Aa Ueug Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: novo, - New - Description: - Vertical design for splitting short and meter-length timber - Sturdy and robust construction - Shock and scratch resistant due to high-quality powder coating - Quick, tool-free adjustment of the splitting height Guodpjvxr Ryofx Aa Uog - Low base plate allows for easy, fatigue-free loading of large logs - Phase inverter included with all 400 V models - Convenient transport using the manual towing drawbar, thanks to the standard chassis with large pneumatic wheels and additional support wheel - Space-saving storage thanks to the easily lowerable cylinder - High-performance industrial hydraulic system - Two-hand safety control - Comes with log holding device Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO shaft speed: 540 rpm Machine Data Maximum splitting force: 23.4 t Minimum log length: 560 mm Maximum log length: 1100 mm Minimum log diameter: 80 mm Maximum log diameter: 350 mm Hydraulic System Hydraulic oil tank capacity: 24 l Item no. 5981023

Stanje: novo, Leto izdelave: 2026, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Gsdpfjff Hdfjx Aa Ueug Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Godpfxecnxa No Aa Uoug Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction module Suitable for milling, planing, and sawing chips (not suitable for fine dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard with high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights: Chip collection volume: 2 x 290 l Suction port diameter (inlet): 260 mm Suction port diameter (outlet): 3 x 120, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data: No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter area: 2 x 5.98 m² Gusdpjhk S Stofx Aa Uog Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal air volume: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of Delivery: Two filter bags, two chip bags Location: Available from stock 54634 Bitburg - Available at short notice -

Stanje: novo, Leto izdelave: 2026, Quick-release belt tensioning via lever Upper belt support with graphite coating 250 mm large, balanced belt drive rollers ensure optimal power transmission. With electric height adjustment With dust extraction and noise protection devices With noise protection certificate With two speeds Tilting sanding shoe adapts to surfaces Beveled surfaces Standard with right and left run The quick-release belt tensioning enables fast and easy sanding belt changes. Gedpoff Hdbofx Aa Ujug Delivery is partially assembled Dimensions and Weight Length approx. 4540 mm Width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Worktable(s) Worktable height adjustment: 620 mm Maximum working width on table: 900 mm Electrical Data Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phase(s): 3-ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece Max. height: 590 mm Max. height workpiece longer than worktable: 180 mm Explanation regarding max. height of workpiece longer than worktable: Processing of the workpiece with an overhang to the right beyond the worktable is possible.

Stanje: novo, Leto izdelave: 2026, Small panel saw with tilting saw blade and high-quality anodised aluminium sliding table Cutting level of the small panel saw is directly at the rolling table Precision-guided format sliding table made from aluminium, anodised as standard Large support table on telescopic arm, longitudinally adjustable Standard table extension and table widening enable easy handling of larger workpieces The large saw unit, made from cast iron, is double-mounted to the cast table, ensuring stability, precision, smooth running, and a long service life Large working table made of ground cast iron, extremely robust and insensitive to wear Smooth operation and precise cuts Aluminium sliding table Proven ball-contact system, in use millions of times Dust and dirt resistant due to minimal contact area between ball and trapezoidal rail 10-year HOLZKRAFT warranty against wear on the hardened guideways Telescopic fence Extendable aluminium telescopic fence Adjustable angle With two professional folding stops Parallel fence Standard with fine adjustment and quick clamping system Scope of delivery: - Table extension - Table widening - Anodised aluminium format sliding table - Parallel fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Crosscut length 1660 mm Gedpfx Ascnxamea Ujug Max. cutting height 90° with scorer 100 mm Max. cutting height 45° with scorer 79 mm Max. rip width left of saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Max. saw blade diameter with scorer 315 mm Max. saw blade diameter without scorer 315 mm Scoring saw blade diameter (option) 80 mm Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Weight 295 kg Location: Available immediately ex stock 54634 Bitburg - immediately available -