Hlajenje Korito nakup rabljenega (1.199)

Stanje: rabljeno, TERMOTEK AG, P705-14974-6 Prisma Series DPSS Laser Chiller, laser cooling Model: P705-14974-6 Credpfx Aec Ua R Aoa Rjh Condition: Used

Leto izdelave: 2008, Stanje: rabljeno, Length approx. 6000 mm Width 520 mm Cedpfxewrbw Is Aa Rorh Motor 3 kW

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): Credog Ezaropfx Aa Roh 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10509, skupna širina: 1.200 mm, skupna dolžina: 1.600 mm, skupna višina: 1.750 mm, skupna masa: 750 kg, izhodna glava: 2.000 mm, kapaciteta rezervoarja: 800 l, tlak (maks.): 6 letvica, obratovalni tlak: 3 letvica, The Transor filtration system features two cleaning towers, each equipped with 36 cleaning cartridges. The cleaning process is fully automatic. The system is equipped with only one cleaning pump and does not require supply pumps, which allows for direct connection to the machine. The cleaning pumps are fitted with filters designed for DIA tools. Inspection of the system is possible. Delivery is immediate. Crsdpfx Aswmzigea Rsh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, 1 x Refrigeration Dryer Kaeser TA 5 Year of manufacture: 2011 In as-new condition. With operating manual. (Photo to follow) Crodsv Tbuqopfx Aa Roh The dryer can be inspected at our warehouse at any time.

Stanje: rabljeno, Leto izdelave: 2000, Type: DAn06 “Adsorption Air Dryers” Max. operating pressure: 16 bar Crsdpfx Aaotp Ihqe Rjh Max. temperature: 55°C Capacity: approx. 420 m³/h With 2 carbon steel tanks, solenoid and check valves, etc.

Stanje: rabljeno, 800170V2105, TW 300, Leybold, TMP with Turbo Drive 300 S + air cooling, DN100ISO-K Model: 800170V2105 Cedevrhqcopfx Aa Rjrh Type: TW 300 Condition: Used

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 90 kW (122,37 KM), New CIAT OPERA DMN 9023-1 SHI 650E9A 12A Table-Type Dry Cooler Horizontal installation, suction operation Thermal output: 90 kW Heat exchange area (thermal margin): 252 m² (1.4%) Heat transfer medium: MEG 30% Cjdpfx Aaswy Uxzj Rerh Inlet/outlet temperature: 45 / 40 °C Inlet volume flow: 16.7 m³/h (0.004638 m³/s) Pressure drop: 59.5 kPa Ambient air Elevation: 0 m Temperature: 30 °C

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Credeg Ey T Eopfx Aa Roh Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AII800306, pritisk: 11 letvica, skupna masa: 440 kg, vhodna napetost: 230 V, okoljska temperatura (maks.): 200 °C, temperatura okolja (min.): −18 °C, temperatura: 66 °C, tlak (maks.): 16 letvica, frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, We purchased the CD 170 adsorption dryer some time ago for our production facility, but it turned out to have more capacity than we require, and we have not used it at all. Credpfewz Ir Dsx Aa Rjh

Stanje: rabljeno, Leto izdelave: 2013, Compressed Air Refrigeration Dryer Model: MG 110 Year of manufacture: 2013 Credeu Rn Trjpfx Aa Rsh Air flow rate: 6,600 m³/h or 110.0 m³/min Rated power: 8.99 kW The air dryer is fully operational and was regularly serviced and inspected up until decommissioning.

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Marke: Transor Typ: 6190-800 A Abmessungen: 1600 x 1000 x 2200 mm Gewicht: ca. 1000 kg Filterleistung: ca. 50–60 l/min Filterfeinheit der Filtereinheiten: 3 – 5 μm Kapazität (gesamt): max. 800 Liter Schmutzöltank: ca. 525 Liter Reinöltank: ca. 275 Liter Geräuschemission: < 70 dB(A) Maximal zulässiger Filterbetriebsdruck: 2,5 bar Maximal zulässige Öltemperatur im Betrieb: prozessabhängig, max. 60 °C Druck: 6 bar Verbrauch: 1 Nm³/min bei 3 bar gemäß Qualitätsklasse: DIN/ISO 8573-1 Feststoffgehalt: max. 40 μm (Klasse 4) Wassergehalt: max. 6 g/m³ (Klasse 4) Ölanteil: max. 1 mg/m³ (Klasse 3) Codpfxjvzakys Aa Rerh Verfügbar ab März 2025. Für weitere Informationen zu diesem Ölfiltrationssystem kontaktieren Sie uns bitte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 10.799 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8P31127C4, potovalna razdalja osi X: 1.145 mm, pomik osi Y: 615 mm, pomik po osi Z: 615 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 6.500 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 10.799 h, dovod hladilne tekočine: 20 letvica, nos vretena: SK-40 DIN69871, število vreten: 1, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Pinnacle LV 116 Control system: Heidenhain iTNC 530 Travel (X): 1,145 mm Travel (Y): 615 mm Travel (Z): 615 mm Table size: 1,200 x 600 mm Tool holder: SK-40 DIN69871 Tool magazine positions: 30 Max. spindle speed: 12,000 rpm Operating hours: 11,658 h (as of 20.06.2025 – machine remains in use) Rapid traverse: 30 m/min Weight: 6.5 t Equipment: - Coolant through spindle, 20 bar, with belt filter unit - Mobile electronic handwheel - Heidenhain iTNC 530 Payment terms: 100% prepayment before dismantling and loading The disc spring package for the tool clamping force was renewed in August 2024. Crjdpfx Astphbzsa Roh We are a tool and die manufacturer reducing our machining operations. The machine is powered and remains in production. Inspection and test operation are possible. The machine can be handed over at short notice by arrangement. With purchase, we can additionally offer: - Training for your staff - Machine cleaning - Installation of transport safety devices - Loading onto truck - Transport with our own truck - Unloading at your premises - Placement of the machine at your site - Machine alignment - Connection and commissioning

Stanje: rabljeno, Electric motor, three-phase motor - Power: 2.2 kW - Speed: 1420 rpm - Shaft: Ø 28 x 60 mm Crodpfx Aaofff Nre Rsh - Design: B5 - Protection class: IP55 - With fan - Dimensions: 585/250/H260 mm - Weight: 29 kg

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) Crsdpfx Asg Ey Ufsa Roh - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno), 4 units in stock Water-cooled control cabinet coolers Manufacturer: PFANNENBERG Type: PWS 7412 Year of manufacture: 2013 Price is per unit. Cedpjiicp Eefx Aa Rjrh

Stanje: pripravljen za uporabo (rabljen), General Information Location Bremen Condition used Tank Volume 1,100 litres Design suspended Heating/Cooling Jacket Heating/Cooling present Cylinder temperature control double jacket Bottom temperature control double jacket Technical Data / Dimensions Internal diameter 1,040 mm External diameter 1,090 mm Cylindrical height 1,200 mm Overall height 3,200 mm Equipment Manhole / Dome in top head (DN 400) Outlet Flange DN40 Note Manhole cover plated Comments Former mounting lugs were cut off during dismantling and are no longer available; 1 heating connection has been cut off; tank shows strong residues Last application adhesive production Material Specification Product-contact material V4A 1.4429 (AISI316) Double jacket material V2A 1.4301 Cedpfx Aoinu Sqja Rjrh

Stanje: rabljeno, Three-phase motor, electric motor - Power output: 2.2 kW Crodpfx Aasct Er Tj Reh - Speed: 1405 rpm - Shaft diameter: Ø 28 mm - Mounting type: B3 - with extra cooling fan - Protection class: IP 55 - Dimensions: 410/260/H195 mm - Weight: 20 kg

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) Crodeg Ey Rfspfx Aa Reh -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: pripravljen za uporabo (rabljen), General Manufacturer Edel Location Bremen Condition used Crodpfxeivr E As Aa Rsh Tank Volume 1,000 litres Max. overpressure 0.50 bar Max. permissible operating temperature 80°C Top head bolted lid Design upright Support type height-adjustable feet Number of feet 4 units Heating/Cooling Jacket Heating/cooling available Jacket volume 26.0 litres Max. permissible operating overpressure 1.0 bar Max. permissible operating temperature 80°C Cylinder temperature control half-pipe coil Technical data / Dimensions Internal diameter 1,150 mm Cylindrical height 830 mm Total height 2,400 mm Bottom plate wall thickness 4.8 mm

Stanje: rabljeno, Disinfection washbasin, hand washbasin, washbasin -Premo Aquadator: Codsb Uhnwepfx Aa Rerh -Multifunctional: cleaning station -With MISCEA sensor fitting: integrated soap and disinfectant dispenser -With hygiene unit: -Stainless steel: washbasin -Basin height: 920 mm -Dimensions: 700/670/H1565 mm -Weight: 98 kg

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Codpfx Aeftm Hroa Rorh *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: rabljeno, Solenoid coil, electromagnet, pull-type magnet -Type: Ritz UIRK 290 Csdpfx Aaefk Udyj Rjrh -Connection: 0.72/3/- kV 50 Hz 1 VA -Price: per unit -Quantity: 3 available -Dimensions: Ø 355 x 30 mm -Weight: 3.1 kg

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) Cedpfx Aasfnvvio Rjrh - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: rabljeno, Mixing tub, mixing bowl, mixing basin, mixing trough - Tub depth: 470 mm Cedpfeb N Ulajx Aa Rsrh - Capacity: approx. 220 l - Corners: rounded - Internal dimensions: 800 x 610 x D 470 mm - External dimensions: 840/860/H640 mm - Weight: 32 kg