Hermle nakup rabljenega (140)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control system HS, cycle-controlled, year of manufacture 1998, in very good original condition. This machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Lrodpfx Abewyn Rqobeg Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, stepless Feed Z: 2 to 1000 mm/min, stepless Rapid feed X and Y: 1.6 m/min Rapid feed Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable through 18 gear stages - Vertical milling head swivels right and left - Hydro-mechanical tool clamping (vertical and horizontal) - Automatic central lubrication - Coolant unit external - Control cabinet mounted to the machine - Fixed angle table - Operating manual and circuit diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1,750 kg Accessories and equipment: - Operating manual, electrical diagrams - Machine feet About the machine: We are offering a Hermle UWF 802 M milling machine with NC control system HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine live under power on site and see its condition for yourself.

Stanje: rabljeno, Leto izdelave: 1990, x-travel: 600 mm Lrodpfjtqmm Ajx Abbeg y-travel: 400 mm z-travel: 420 mm Control: Heidenhain TNC 355 Main spindle: Speed range - main spindle: 20 - 4,000 rpm Drive power - main spindle: 7 kW Number of gear steps: 3 Tool holder: SK 40 Distance spindle / table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Quill stroke, vertical: 75 mm Tool clamping force: 10 kN Swiveling +/- 90° Work table: Clamping surface: 900 x 458 mm T-slots: 7x 63 x 14H7 Feeds: Feed range: 1 - 5,000 mm/min Feed force: 5.4 kN Rapid traverse (X / Y / Z): 7 / 7 / 6 m/min Total power requirement: 13 kW Machine weight approx.: 3.0 t Space requirement approx.: 4.0 x 4.0 x 2.1 m Tool milling machine - Universal HERMLE - UWF 900 E - Spindle head swivels +/- 90°

Stanje: rabljeno, Leto izdelave: 1989, X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Table size: 850 x 440 mm Spindle taper: SK 40 Control: HEIDENHAIN TNC 355 Tool changer: 32 positions Ljdpfetqqn Dsx Abborg Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/cross/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and cross: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight: approx. 3 t Dimensions (L x W x H): 2.7 x 2.5 x 2.0 m Accessories: CNC indexing head (= 4th axis) by WALTER with 3-jaw chuck 160 mm diameter, swiveling vertical head with hydraulic tool clamping and extendable quill, fixed table, various tool holders, electronic handwheel, coolant device

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, x-axis travel 500 mm y-axis travel 430 mm z-axis travel 400 mm Lsdpjwi Ugdofx Abborg Clamping surface of table 800 x 390 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Spindle motor 3 kW Quill stroke 80 mm Feeds - longitudinal and cross 4 - 1600 mm/min Feeds - vertical 4 - 1000 mm/min Rapid traverse - longitudinal/cross/vertical 1.6 / 1.6 / 1.0 m/min Control HEIDENHAIN, TNC 135 Total power requirement 5 kW Machine weight approx. 1.4 t Machine dimensions L x W x H 2.3 x 2.3 x 1.7 m Accessories: swiveling vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1994, x-travel: 850 mm y-travel: 630 mm z-travel: 550 mm Table clamping surface: 1200 x 550 mm Spindle taper: SK 40 Spindle speeds: 20 - 4,200 rpm Spindle motor: 11.5 kW Lredpotqqyiefx Abbjg Quill stroke: 95 mm Feed rates - longitudinal/cross/vertical: 1 - 10,000 mm/min Rapid traverse longitudinal and cross: 10 m/min Rapid traverse vertical: 10 m/min Control: HEIDENHAIN, TNC 426 Total power requirement: 21 kW Machine weight approx.: 6 t Machine dimensions (L x W x H): 4.95 x 2.30 x 2.30 m Accessories: NC indexing table (= 4th axis) with tailstock, make HOFMANN, RWNC-160; swiveling vertical head with hydraulic tool clamping and extendable quill, fixed table, electronic handwheel, coolant system

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 5722, Table clamping surface: 190 x 710 mm Table travel x: 390/360 mm Ljdpfsflrg Tex Abbsrg Table travel y: 150 mm Table travel z: 280 mm Spindle mount: SK 40 Spindle speeds: 100 - 3100 rpm Longitudinal feed: 0 - 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Stanje: rabljeno, Leto izdelave: 2013, x-way 650 mm y-way 600 mm z-way 500 mm Control iTNC 530 Heidenhain Spindle speed 18,000 rpm Main spindle drive power 10 / 15 kW Tool holder HSK A 63 Rotary table diameter 630 mm Centering bore 32 H7 Swivel range A: ° rotatable C: 360 ° Max. table load 1,000 kg Number of tool positions 32 pos. Tool holder HSK A 63 Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 125 mm Max. tool length 300 mm Max. tool weight 8 kg Rapid traverse ( X / Y / Z ) 60 m/min Acceleration 10 m/s² Feed force 8,500 N Total power requirement 43 kVA Machine weight approx. 9.5 t Space requirement approx. 15 x 7.5 x 3.5 m 5-axis CNC machining center Universal Hermle - C 30 U Linear axes dynamic version 6-fold rotary union Blow air through spindle center Automatic cabin door Rotating clear view window Lodpfx Aouyl Tbjbbjrg - incl. 32x HSK 63 holders - incl. 10x collets Also available as a manufacturing cell (2x Hermle C 30 U + Kuka Automation)

Stanje: rabljeno, Leto izdelave: 2014, x-put 650 mm y-put 600 mm z-put 500 mm Upravljanje iTNC 530 Heidenhain Broj obrtaja 18.000 o/min Pogonska snaga – glavno vreteno 10 / 15 kW Prihvat alata HSK A 63 Prečnik okretne stola 630 mm Centrirajuća rupa 32 H7 Opseg okretanja A: ° rotiranje C: 360 ° maks. opterećenje stola 1.000 kg Broj mesta za alat 32 poz. Prihvat alata HSK A 63 maks. prečnik alata 80 mm maks. prečnik alata uz slobodnu susednu kutiju 125 mm maks. dužina alata 300 mm maks. težina alata 8 kg Lsdpjuyl Thefx Abbjrg Brza vožnja (X / Y / Z) 60 m/min Ubrzanje 10 m/s² Sila posmaka 8.500 N Ukupna potrebna snaga 43 kVA Težina mašine cca 9,5 t Potrebni prostor cca 15 x 7,5 x 3,5 m 5-osna CNC obradni centar univerzalni Hermle - C 30 U Linearne ose verzija za dinamiku 6-puta rotacioni prolaz Duvan vazduh kroz sredinu vretena Automatska vrata kabine Rotacioni prozor od sigurnosnog stakla - uključuje 32x HSK 63 prihvata - uključuje 10x steznih čaura Takođe dostupno kao proizvodna ćelija (2x Hermle C 30 U + Kuka automatizacija)

Stanje: rabljeno, Leto izdelave: 2013, X-travel: 650 mm Y-travel: 600 mm Z-travel: 500 mm Control: iTNC 530 Heidenhain Spindle speed: 18,000 rpm Main spindle drive power: 10 / 15 kW Tool holder: HSK A 63 Rotary table diameter: 630 mm Centering bore: 32 H7 Swivel range A: ° Rotation C: 360° Max. table load: 1,000 kg Number of tool positions: 32 Tool holder: HSK A 63 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Total power requirement: 43 kVA Machine weight: approx. 9.5 t Space requirement: approx. 15 x 7.5 x 3.5 m 5-axis CNC Universal Machining Center Hermle - C 30 U Hermle manufacturing cell consists of: - 2x Hermle C 30 U Lodpouwv Dlefx Abbsrg Linear axes dynamic version 6-way rotary feedthrough Air blast through the spindle center Automatic cabin door Rotating safety window - 1x Kuka KR 180 R2900 prime 6 axes Payload: 180 kg Reach: 2,896 mm 66 positions for workpiece pallets 2x change positions 1x turning station 8x gripper positions - incl. 1x Schunk gripper - incl. 66x workpiece pallets - incl. 64x HSK 63 holders - incl. 20x collets Also available as a single machine: Hermle C 30 U.

Stanje: rabljeno, Hermle milling machine H 2 with accessories Lrodpfx Aougv Nwsbbeg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 11.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel distances X-axis: 850 mm Travel distances Y-axis: 700 mm Travel distances Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse X-Y-Z (linear): 35 - 35 - 35 m/min Acceleration X-Y-Z (linear): 6 m/s² Feed force X-Y-Z (linear): 7,000 N Max. throat gap: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent slots filled: Ø 80 mm Tool diameter without adjacent slots: Ø 125 mm Max. tool weight: 8 kg Max. magazine load: 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: Worm drive Swivel axis A speed: 25 rpm Rotary axis C speed: 30 rpm Table load (one-sided drive): 600 kg Accuracy per ISO 230-2 Deviation (A in X-Y-Z axes): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Pre-filter, paper band filter Ljdpfx Abovw Sdqobsrg Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control on-time: 20,178 h Machine on-time: 19,094 h Spindle run time: 11,832 h Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM touch probe - BLUM laser tool measurement - Extendable chip drawer - Swivel rotary table - Coolant spray gun - Emulsion mist extraction - Scraper belt conveyor - Air blast device - Air blow through the spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical thermal compensation (Heidenhain) - Electrical manual control module (Heidenhain)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, A similarly configured machine was recently auctioned off successfully! Bidding obligates the buyer to collect the machine on time by 31.03.2025! TECHNICAL DETAILS Travel X-axis: 850 mm Ljdsv Hmdqepfx Abbsrg Travel Y-axis: 700 mm Travel Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Acceleration linear X-Y-Z: 6 m/s² Feed force linear X-Y-Z: 7,000 N Maximum throat clearance: 625 mm Workpiece dimensions Maximum diameter: Ø 650 mm Maximum height: 500 mm Interference circle (A-axis) at 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent positions occupied: Ø 80 mm Tool diameter without adjacent positions: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Centering bore: Ø 32 H7 Swivel range: +91° / -139° C-axis drive type: Worm drive A-axis swivel speed: 25 rpm C-axis rotation speed: 30 rpm Table load single-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z-A-axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Safety filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control on-time: 24,403 h Machine on-time: 23,349 h Program run time: 16,193 h Spindle hours: 13,916 h Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flush gun - Emulsion mist extraction - Scraper belt conveyor - Air blow system - Blowing air through spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Heidenhain electrical heat compensation - Heidenhain electronic handwheel

Stanje: dober (rabljeno), Leto izdelave: 2004, Manufacturer: HERMLE Model: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Approximate machine weight: 8,500 kg Tool holder: SK 40 X-axis travel: 1,300 mm Y-axis travel: 720 mm Z-axis travel: 630 mm Spindle speed range: 18,000 rpm Maximum table load: 700 kg Operating hours: 50,775 h Spindle hours: 21,654 h Lrsdpjv S Alnjfx Abbeg Space requirements (approx.): 3,600 x 4,500 x 2,800 mm Table size: 800 x 1,000 mm Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D probing system: TS 640 5 axes: simultaneous

Leto izdelave: 1989, Stanje: rabljeno, Hermle universal milling machine Type UWF 801 Working area longitudinal X axis: 500 mm Transverse Y axis: 430 mm Vertical Z axis: 400 mm Clamping surface: 800 x 220 mm Tool holder: SK 40 Spindle motor: 3 kW Ledpsihqatofx Abberg Quill stroke (vertical): 80 mm Control system: TNC 114

Leto izdelave: 1983, Stanje: rabljeno, Hermle UWF 700 Short description: Universal tool milling machine Universal tool milling machine Hermle Model: UWF 700 Year of manufacture: 1982 Table size: 700 x 285 mm Travel X / Y / Z: 400 / 290 / 380 mm Tool holder: SK 40 Spindle speeds: 40 – 2000 rpm Quill stroke: 63 mm Drive power: 2.2 kW Lrsdpfxokhc A Do Abbeg Digital readout Counter support Weight: 1,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 14.430 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13479, potovalna razdalja osi X: 875 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, teža obdelovanca (maks.): 300 kg, premer vrtljive mize: 500 mm, največja hitrost vretena: 7.000 obr/min, The machine can be loaded free onto truck for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Positioning accuracy: ±15'' Table load capacity: 300 kg Drive Power rating (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed force X, Y, and Z: 8,000 N Rapid traverse: 15 m/min Ball screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z-Axis acc. to VDI/DGQ 3441: 0.010 mm Lodpovn Si Iefx Abberg Tool system Spindle taper: SK 40 (similar to DIN 2079, for toolholders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with adjacent stations free: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power consumption: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control power-on hours: 50,052 h Program run time: 15,142 h Spindle power-on hours: 14,430 h Coolant unit Tank capacity: 120 l Delivery rate at 3 bar flow pressure: 24 l/min

Stanje: dober (rabljeno), CNC - Univerzalni rezkalni stroj HERMLE UWF 902-S - Krmiljenje Heidenhain 426 - Leto izdelave 1997 - Pomiki X/Y/Z 600-450-500 mm - Orodni držalo SK 40 - Vertikalna - horizontalna rezkalna enota - Vrtalna pinola - Naprava za hlajenje Lsdpfexb Azwsx Abborg - Kotna miza - Ohišje stroja - Dokumentacija Dimenzije: D x Š x V: 3,9x2x2 m / Teža: 4000 kg Pridržujemo si pravico do napak in sprememb.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45 m/min, hitri pomik os Y: 45 m/min, hitri pomik na osi Z: 45 m/min, model krmilnika: Heidenhain iTNC530, širina mize: 960 mm, dolžina mize: 600 mm, skupna masa: 9.000 kg, največja hitrost vretena: 40.000 obr/min, delovne ure vretena: 22.800 h, nos vretena: HSK E 40, število vreten: 1, število mest v zalogovniku orodij: 38, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Ta stroj je bil uporabljen izključno za obdelavo bakra. Sistem hlajenja z vodo je sicer prisoten, vendar do sedaj ni bil uporabljen. Gre za odličen stroj, ki je vedno lahkotno obdeloval, brez uporabe hladilne vode, z Weiss vretenom 40.000 vrt/min. Stroj je standardno dobavljen vključno z: Lrodpfx Ajxgukbjbbeg - Originalno dokumentacijo stroja in Weiss vretena - BLUM laserskim merilcem orodja - 3D sondo Heidenhain TS-440 - Hladilnikom vretena in emulzije - Zaklenljivo harmonika streho Stroj je možno pod napetostjo ogledati po dogovoru.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 48.702 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16261, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Siemens Sinumerik 840 D pl , največja hitrost vretena: 28.000 obr/min, TECHNICAL DETAILS Travel X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Main spindle speed range: 20 - 28,000 rpm Main spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool holder: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed (A): 25 rpm / (C): 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control system: Siemens Sinumerik 840 D pl Space Requirement & Weight Approx. space requirement: 8.5 x 5.5 x 3.0 m Approx. machine weight: 10,500 kg Total power consumption: 43 kVA Operating hours: 48,702 h EQUIPMENT Documentation High-pressure coolant Coolant system Through-spindle coolant supply: 80 bar / 1,300 l Lredpsxbz A Hjfx Abbeg Electronic handwheel Full enclosure FASTEMS pallet pool / 15 positions Chip conveyor Paper band filter Renishaw probe Tool breakage control Note: Transport rigging must be organized by the buyer. The pallet system cannot be inspected under power. The Fastems computer is defective.

Stanje: dober (rabljeno), Leto izdelave: 1991, Travel paths: X = 600 mm, Y = 400 mm, Z = 420 mm Ledpfx Aowvif Uobborg Spindle speed range: 20 – 4000 rpm Gear stages: 3 Taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse X, Y: 7 m/min Rapid traverse Z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, probing system (defective)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45 m/min, hitri pomik os Y: 45 m/min, hitri pomik na osi Z: 45 m/min, model krmilnika: Heidenhain iTNC530, širina mize: 1.070 mm, dolžina mize: 700 mm, skupna masa: 10.000 kg, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 16.533 h, nos vretena: SK40, število mest v zalogovniku orodij: 38, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Ponovno zelo lepo ohranjen HERMLE C40V iz orodjarne. Stroj je v izjemno lepem stanju in si ga je mogoče pri nas ogledati pod napetostjo! Stroj je standardno opremljen z: Blum laserskim merilcem orodja Lrodpfx Asxd U N Sobbog Tipalom Heidenhain TS440 Prilagojeno hladilno mizo Zapiralno streho (harmonika) Originalno dokumentacijo Hladilnik vretena in Emusliecooler.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Manufacturer: HERMLE Model: C 800 U Year of manufacture: 2003 Control: Siemens 840D Approx. machine weight: 9,000 kg Lrodpstmtxmefx Abbjg Tool holder: SK40 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle speed range: 16,000 rpm Number of tools in magazine: 80 pcs. .....

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), A CNC universal milling and drilling machine Hermle is available. Travel (X/Y/Z): 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feedrate: 10m/min, rapid traverse: 10m/min. Machine dimensions (X/Y/Z): approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. Inspection on site is possible. Lrjdpjw D Evlofx Abbog

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), X-axis: 630 mm, Y-axis: 500 mm, Z-axis: 500 mm, table dimensions: 900 x 528 mm, NC rotary table diameter: 500 mm, connected load: 14 kVA, length: 3,600 mm, width: 3,900 mm, height: 2,100 mm, weight: 6 t, supplied with documentation. Lrsdpfelc N Stjx Abbsg

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Year of manufacture: approx. 1990, Travel X/Y/Z: 600mm/400mm/420mm, Spindle speed: 4000 rpm, Tool holder: SK40, Table-to-spindle distance: 127mm-567mm, Spindle head swivel: +/-90°, Table size X/Y: 900mm/450mm, Feed rate: 5 m/min, Rapid traverse X/Y/Z: 7m/7m/6m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2100mm, Weight: approx. 3000kg, Control: Heidenhain TNC 355. The motor spindle controller is faulty. Documentation is available. An on-site inspection is possible. Lodpfx Ajwynvyobberg