Haas Laser nakup rabljenega (235)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 3.500 obr/min, moč vretenovega motorja: 22.000 W, proizvajalec krmilnikov: HAAS, število osi: 3, Ta 3-osni horizontalni stružni stroj HAAS ST-30 je bil izdelan leta 2014 in je opremljen z avtomatskim podajalcem palic KID80. Idealen za precizne stružne operacije, nudi robustno konstrukcijo in zanesljivo delovanje. Razmislite o priložnosti za nakup tega horizontalnega stružnega stroja HAAS ST-30. Kontaktirajte nas za več informacij. Dodatna oprema: • Zbiralnik obdelovancev • Podajalnik palic Lodpfx Aex D S Hzjdkjhd Prednosti stroja Tehnične prednosti stroja: • Prehodna odprtina za obdelovanec: 76 mm • Revolverska glava vdi40 x 12 • Menjalnik orodij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 3.400 obr/min, potovalna razdalja osi X: 239 mm, pomik osi Y: 51 mm, pomik po osi Z: 826 mm, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis HAAS ST-30Y horizontal lathe was manufactured in 2022. It features a 10-inch chuck, a maximum turning diameter of 13.75 inches, and a turning length of 32.5 inches. The machine is equipped with a BMT-65 turret with 12 stations and speeds of up to 4,000 rpm for live tooling. The Y-axis enables off-center milling, drilling, and threading. Take advantage of this opportunity to purchase the HAAS ST-30Y horizontal lathe. Contact us for further information. • Chuck size: 10 inches (≈254 mm) • Maximum bar capacity (through spindle): 3 inches (≈76 mm) • Maximum swing over front apron: 31.75 inches (≈806 mm) • Maximum turning diameter: 13.75 inches (≈349 mm) with BMT65 turret • Maximum turning length: 32.5 inches (≈826 mm) Lhedpfxox D Iixj Adked • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 inches (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-center milling, drilling, and threading • Coolant capacity: 55 gal (~208 L) • Air supply requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195-260 V (depending on region) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment: • Live tool holders (under power) • Various tool holders • Liners

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 287 mm, pomik po osi Z: 864 mm, proizvajalec krmilnikov: HAAS, število osi: 2, Horizontalni stružnica iz leta 2001. Ta HAAS SL-30THE je zasnovana za natančnost z vrtljaji vretena 3.000 min⁻¹ in premerom vpenjalnega tuležnika 254 mm. Z X-hodnim pomikom 287 mm in Z-hodnim pomikom 864 mm nudi zanesljivo učinkovitost za stružne operacije. Izkoristite priložnost za nakup te horizontalne stružnice HAAS SL-30THE. Za več podrobnosti nas kontaktirajte. Lhodpoyhb Rrjfx Adksd • Premer čeljustne glave: 254 mm • Stroj obratuje, vendar vektorski pogon ne deluje pri zmanjšanju vrtljajev motorja. Vektorski pogon je star manj kot leto in pol, popravilo je verjetno mogoče.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 5.934 h, potovalna razdalja osi X: 406 mm, pomik osi Y: 305 mm, pomik po osi Z: 254 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 40.000 obr/min, število osi: 3, This 3-axis HAAS Super Mini Mill HE was manufactured in 2005 and features a robust Haas CNC control as well as an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine is equipped with an automatic tool changer with a capacity for 18 tools, ensuring efficient operation. If you are looking for high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining center we have for sale. Please contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) Lsdpfx Adoyhfltjkshd • Capacity: 18 tools • Operating hours (as per CNC control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360-480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Peak current: 35 A • Short-circuit breaking capacity: 10,000 A Technical Specification Taper size: HSK 32

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.270 mm, pomik po osi Z: 814 mm, proizvajalec krmilnikov: HAAS, število osi: 4, This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1,626 mm x 814 mm) with an integrated 4th-axis rotary table, an SK 50 milling spindle, and a 30+1 tool changer. The machine can handle workpieces with a weight of up to 4,536 kg and is equipped with two chip conveyors. If you are looking for a high-quality milling machine, you should consider the HAAS EC-1600 that we are offering for sale. Please contact us for further information. • Table with integrated 4th-axis rotary table • Table dimensions: length 1,626 mm x width 814 mm • Rotary table diameter: 762 mm • Tool changer: 30 +1 • Includes Renishaw probe • Last geometry inspection by HAAS in 2023 • Machine is still under power Additional equipment: • Coolant tank with low and high-pressure pumps • 2 chip conveyors with auger • Includes Renishaw probe • Last geometry inspection by HAAS in 2023 Lhsdpox D Eppsfx Adkjd Technical Specification: Taper size SK 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, Ta 3-osna HAAS VF-2SSYT s paletnim magazinom 3+1 je bila izdelana leta 2022. Opremljena je z 30 KM (22,4 kW) linijsko vreteno z 12.000 vrt./min in menjalcem orodij s 50+1 mesti. Ima 15'' zaslon ter paletni sistem 3+1 s paletami velikosti 900x450 mm. Če iščete visokokakovostne rezkalne stroje, razmislite o stroju HAAS VF-2SSYT, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti • Menjalec orodij: 50+1 postaj • Ekstra hladilna tekočina: 360 litrov • Paletni magazin: 3+1 pozicije s paletami 900x450 mm • 21 bar skozi vreteno • 15" zaslon Lhsdpfx Aox Hbluedkod Dodatne informacije Stroj je še vedno pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, model krmilnika: na, skupna višina: 2.770 mm, obremenitev mize: 794 kg, skupna masa: 6.260 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 224.000 W, teža orodja: 5.400 g, število osi: 3, This 3-axis vertical machining center HAAS VF4SS was manufactured in 2019. It is equipped with a spindle featuring a maximum speed of 12,000 rpm and a power output of 22.4 kW. The machine provides a travel range of X=1270 mm, Y=508 mm, Z=635 mm, and a rapid traverse rate of 35.6 m/min on all axes. The table can support a load of up to 794 kg. Take the opportunity to acquire this HAAS VF4SS vertical machining center. Please contact us for more information. Additional Equipment • Technical manuals and documentation • Chip conveyor • Optional tools included • Loading at our facility possible Machine Advantages Technical Features • Maximum torque: 122 Nm at 2000 rpm • Liquid cooling – air/oil lubrication • Table size: 1321 x 495 mm • Type: SMTC – 30+1 tool positions • Tool change time: 1.8 s • Rapid traverse: 35.6 m/min on all axes • Max. thrust force Z-axis: 17,459 N • Voltage: 220/440 V – 3 phase • Maximum phase current draw: 70 A (at 220 V) Additional Information Machine still under power Lhsdpjyalkyefx Adkod Dimensions Machine depth: 3870 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Ta 3-osni vertikalni obdelovalni center HAAS VF-4BHE je bil izdelan leta 2006. Deluje na 360-480 V, s polno obremenitvijo 20 A in največjo obremenitvijo 35 A. Idealno za natančna rezkalna dela – preučite stroj HAAS VF-4BHE, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Napetost: 360-480 V • Faze: 3 • Frekvenca: 50/60 Hz • Polna obremenitev: 20 A • Največja obremenitev: 35 A • Preklopna zmogljivost pri kratkem stiku: 10.000 A Lhedpsybg Ensfx Adksd • Električna shema: 96-8400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 5.300 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, model krmilnika: NGC, širina mize: 1.219 mm, dolžina mize: 457 mm, obremenitev mize: 1.588 kg, največja hitrost vretena: 8.100 obr/min, število mest v zalogovniku orodij: 20, število osi: 3, This HAAS VF-3 vertical machining center, manufactured in 2017, offers powerful milling performance with a large table measuring 1219 × 457 mm and a load capacity of 1,588 kg. It is equipped with a spindle running at 8,100 RPM, a chip auger, and the option for 21 bar through-spindle coolant. The machine is in excellent technical condition. If you are looking for a high-quality milling machine, you should consider the HAAS VF-3 we have for sale. Please contact us for more information. • Table size: 1219 x 457 mm • Tool magazine capacity: 20 tools • Infinitely variable spindle speed control Additional Equipment • AUGER – Screw-type chip conveyor • WIPS-R – Wireless intuitive probing system • ACF – Additional 25 μm filtration system • TSC – Through-spindle coolant with high-performance pump (21 bar) • Documentation / Operating manual Lhodpfx Ajx D Hpdsdksd Technical Specification Taper Size: ISO 40 Through-spindle Coolant: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 5.557 h, potovalna razdalja osi X: 706 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, širina mize: 914 mm, dolžina mize: 356 mm, obremenitev mize: 1.361 kg, največja hitrost vretena: 8.100 obr/min, število osi: 3, Stroj HAAS VF-2, letnik 2008, nudi visoko zmogljivost obdelave s hodom 706 mm v osi X, 406 mm v osi Y in 508 mm v osi Z. Opremljen je z največjo hitrostjo vretena 8100 min⁻¹ in zmogljivim motorjem vretena z močjo 22,4 kW, zato je zelo primeren za zahtevne rezkalne aplikacije. Optično in tehnično je stanje stroja glede na starost zelo dobro. Kontaktirajte nas za več informacij. • Miza: 356 x 914 mm • Kapaciteta zalogovnika orodij: 20 orodij Dodatna oprema • Transporter ostružkov • Dokumentacija / Navodila za uporabo Lhodpfx Adex D Hpksksd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, This 3-axis HAAS VF-9/40HE vertical machining center was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, a Y-axis travel of 1,016 mm, and a Z-axis travel of 762 mm. The machine is equipped with a robust table size of 2,134 × 914 mm and a maximum table load capacity of 1,814 kg. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-9/40HE machine we are offering for sale. Please contact us for further details. • Travel distances • Spindle nose to table: 102-864 mm • Table • Size: 2,134 × 914 mm • T-slot width: 15.9 mm • T-slot center distance: 125 mm • Feed rates • Rapid traverse (X): 15.2 m/min • Rapid traverse (Y, Z): 15.2 m/min • Max. cutting feed rate: 12.7 m/min • Spindle • Maximum torque: 102 Nm at 1,400 rpm • Bearings: ABEC class 7 • Electronic spindle orientation • Tool changer • Capacity: 24+1 standard (40+1 optional) • Tool type: CT40 standard / BT optional • Max. tool diameter: 76 mm (all pockets filled); 152 mm (adjacent pockets empty) • Maximum tool length: - • Type: Electromechanical, cam-driven • Tool-to-tool: 2.8 s Lhodpfeylnpvjx Adkod • Chip-to-chip: 3.6 s • Machine requirements • Power requirement: 14 kVA • Voltage: 200-250 VAC, 3 phase, 50-60 Hz • Air supply: 113 L/min at 6.9 bar • Enclosure • Full steel enclosure

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število osi: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a spindle with 12,000 rpm, a 40+1 tool changer, through-spindle coolant at 21 bar, and a chip conveyor. High-speed machining capabilities are enhanced by programmable coolant delivery and by dynamic work offset/tool center point control. The machine is also equipped with Renishaw probing systems and a robot interface. If you are looking for a high-quality milling machine, you should consider the HAAS UMC-750 we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as equipped) • Through-spindle coolant (TSC) 21 bar • Through-spindle air • High-speed machining Lhsdpfxjx Imtto Adksd • Programmable coolant nozzle (P-Cool) • DWO/TCPC • Automatic door • Side windows • Full enclosure/closed enclosure Additional equipment • Chip conveyor • Renishaw probing system (measuring probe) • Robot interface

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 508 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, skupna višina: 2.667 mm, obremenitev mize: 1.361 kg, skupna masa: 3.300 kg, največja hitrost vretena: 8.100 obr/min, moč vretenovega motorja: 22.400 W, število mest v zalogovniku orodij: 20, teža orodja: 5.400 g, število osi: 3, To 3-osno vertikalno obdelovalno središče HAAS VF-1 je bilo izdelano leta 2013. Opremljeno je s krmiljenjem HAAS, močjo vretena 22,4 kW in hitrostjo vretena 8100 obr/min. Stroj ima karuselni magazin orodij s 20 mesti in rezervoar za hladilno tekočino s prostornino 208 litrov. Če iščete visokokakovostni rezkalni stroj, razmislite o modelu HAAS VF-1, ki je na voljo za prodajo. Kontaktirajte nas za več informacij. Lhjdpfxsygld Hj Adkod • Miza: dolžina 660 mm; širina 356 mm • Magazin orodij: karuselni, 20 mest • Prostornina hladilne tekočine: 208 l Dimenzije Globina stroja: 2489 mm Tehnična specifikacija Tip stožca: BT 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 750 mm, pomik osi Y: 410 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HAAS, obremenitev mize: 340 kg, največja hitrost vretena: 8.000 obr/min, število osi: 4, Ta 3-osni HAAS MIKRON VCE 750 je bil izdelan leta 1997. Ima delovno mizo velikosti 900x350 mm, kapaciteto mize 340 kg in pomike osi X 750 mm, Y 410 mm in Z 500 mm. Vreteno deluje pri 8000 vrt/min z močjo 7,5 kW. Redno servisiranje in aktualne posodobitve zagotavljajo zanesljivost. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra HAAS MIKRON VCE 750. Kontaktirajte nas za več informacij o tem stroju. Lhedpex D Egzofx Adkod

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, obremenitev mize: 680 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, teža orodja: 5.000 g, število osi: 3, This 2024 HAAS VF-2SSYT 3-axis CNC vertical machining center features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has seen little use and is in excellent condition. It offers travel paths of 762 mm in the X-axis and 508 mm in the Y and Z axes. Take advantage of this opportunity to purchase the HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max. torque: 122 Nm @ 2,000 rpm • Drive: Inline direct drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max. tool diameter: 64 mm (127 mm with empty adjacent pocket) • Max. tool length: 279 mm • Tool-to-tool change time: 1.8 s • Chip-to-chip time: 2.4 s • Feed rates: • Max. cutting feed rate: 21.2 m/min • Rapids (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity: 208 L • Air supply: • Requirement: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar Lhodjykrz Hjpfx Adksd • 4th axis ready Additional equipment: • Mist/fume extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil skimmer • Renishaw probing system • 2 vices • Complete set of high-quality tool holders, end mills, and drills

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 660 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, Ta 3-osni stroj HAAS VF-5SS je bil izdelan leta 2016. Ima X-hod 1270 mm, Y-hod 660 mm in Z-hod 635 mm. Stroj je opremljen z maksimalnim številom vrtljajev vretena 12.000 min⁻¹ in z magazinom za 24 orodij. Če iščete vrhunske možnosti obdelave, razmislite o nakupu vertikalnega obdelovalnega centra HAAS VF-5SS, ki je na voljo pri nas. Za več informacij nas kontaktirajte. • T-utorov: 7 • Največji navor vretena: 122 Nm pri 2000 min⁻¹ • Hitri pomik: 30 m/min • Magazin za orodje: 24 pozicij Tehnične specifikacije Lsdpfx Ajypb A Dsdkshd Vpenjalni stožec ISO 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 7.931 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 660 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, število osi: 3, This 4-axis HAAS VF-3SSYT with HRT 210 4X was manufactured in 2018. It features a spindle with 12,000 RPM, a side-mounted 30+1 tool changer, and through-spindle coolant supply at 300 psi. The machine comes equipped with a 4th axis drive, a wireless probing system, and high-speed machining capabilities. If you are looking for a high-quality milling machine, you should consider the HAAS VF-3SSYT we have for sale. Contact us for further information about this machine. Additional equipment Lhjdpfx Adsyalh Eoksd • 30+1 high-speed side-mount tool changer / Advanced tool management / Power-failure detection module / Multi-stage coolant pump / Rigid tapping protection run / Media display M-code; M130 / Surge protection / Window air blast / Visual part programming system / Custom macros / Spindle orientation / Coordinate rotation and scaling / Chip tray filter set / CT-style tool changer gripper / Through-spindle coolant, 21 bar (300 psi) / 4th axis drive and wiring / Intuitive wireless probing system / Chip auger / Programmable coolant nozzle / High-speed machining / Large remote jog handle with touchscreen display / High-voltage transformer, non-USA Machine advantages Technical machine advantages • Spindle speed: 12,000 rpm • Standard program memory: 1 GB / widescreen control monitor • Remote monitoring: HaasConnect / Ethernet interface / WiFi connectivity for Haas control

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 750 mm, pomik osi Y: 410 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HAAS, model krmilnika: na, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 7.500 W, število osi: 4, Ta 4-osni HAAS MIKRON VCE 750 je bila izdelana leta 2000. Ima delovno površino mize 900x350 mm, hitrost vretena 8000 vrt/min in moč vretena 7,5 kW. Opremljen je z CNC krmiljenjem HAAS v dialognem načinu, elektronskim ročnim kolesom in vijačnim transporterjem za odrezke, zato je to vertikalni obdelovalni center idealen za natančna in podrobna obdelovalna opravila. Za več informacij o tem stroju nas kontaktirajte. Lhedeyaitfspfx Adkod Prednosti stroja Tehnične prednosti stroja • Površina mize: 900x350 mm • Teža mize: 340 kg • Elektronsko ročno kolo • 3-barvni statusni signal • Transporter za odrezke: vijačne vrste • Programabilna hladilna šoba • 4. os: 360000° Dodatne informacije Popolna dokumentacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 60.000 h, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število osi: 3, Cette HAAS UMC-750 à 5 axes a été fabriquée en 2014. Elle dispose d’un centre d’usinage vertical avec une broche à 12 000 tr/min, des outils BT40 et une capacité de 70 porte-outils. Parmi les points forts, citons l’arrosage par la broche, une sonde de mesure, un changeur d’outils et la possibilité d’usinage à grande vitesse. Saisissez l’opportunité d’acquérir ce centre d’usinage vertical HAAS UMC-750. Contactez-nous pour de plus amples informations sur cette machine. • Refroidissement par la broche (eau et air), 21 bars • Option usinage grande vitesse • Capacité ATC : 40 outils • Palpeur de pièce • Dispositif de réglage d'outil • Préparée pour l’automatisation latérale (magasin palettes, PP) Lhjdpfx Adjx Ixh Njked Équipement supplémentaire • 70 porte-outils Caractéristiques techniques Cône : BT 40

Stanje: dober (rabljeno), Franz Haas Wafer Stick Baking Oven Model EWB 1/1 after comprehensive overhaul. Lhedpfx Adeywgaxjkjd The machine is made from ASIS 304 stainless steel (main frame made of carbon steel). The oven is equipped with a rotary ring, which has adjustable speed to achieve the desired type of wafer baking. The ring has been cleaned and checked (alignment), support bearings are new. Fans have been replaced with new ones. New chimney exit with flange for quick installation. The machine is equipped with two extruders, including sleeves for strip shaping and for wafer stick diameter forming. It features a knife with pneumatic actuator and photocell for precise cutting (adjustable tube length possible). The oven includes a stainless steel batter tank mounted on a frame with cart. Equipped with pumps for transferring batter from the tank onto the surface of the ring. Comes with a new control panel and a new gas reducer. Ring and pump speeds adjustable via frequency inverters. Dimensions: length 3,200 mm, width 1,400 mm, height 1,700 mm. The machine is gas-powered, suitable for high-methane natural gas, symbol E (formerly GZ 50). Power supply: 3x400V / 16A, approx. 2.5/3 kWh consumption. Machine after complete renovation. All thermal elements have been replaced with new, eco-friendly components—lower gas consumption, more efficient operation. Output approx. 120–150 kg/8h.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Haas VF4 NGC. Commissioned in 2020. Single owner since new. TECHNICAL SPECIFICATIONS OF VF-4 MACHINING CENTER Travel Unit Value Travel in X axis mm 1,270 Travel in Y axis mm 508 Travel in Z axis mm 635 Distance between table surface and spindle mm 102-737 Work Table Table surface X x Y mm 1,321x457 Maximum table load kg 1,588 Table design T-slots Slot width mm 16 Slot spacing mm 80 Spindle and axis drives Taper / standard DIN 69871 / ISO 40 Maximum spindle speed rpm 8,100 Drive type direct Maximum torque / at 2,000 rpm Nm 122 Max. torque / at 450 rpm / with optional 2-speed gearbox Nm 339 Maximum spindle power kW 22.4 Maximum feed force in X and Y axes kN 11.3 Maximum feed force in Z axis kN 18.6 Feed rates and rapid traverse Rapid traverse X, Y, Z axes m/min 25.4 Feed rates m/min 16.5 Tool Magazine Number of tools in magazine 20 Maximum tool diameter / all positions mm 89 Maximum tool weight kg 5.4 Tool change time / tool-to-tool s 4.2 Lsdeyvlwtopfx Adkohd Tool change time / chip-to-chip s 4.5 Accuracy Positioning accuracy mm +/-0.005 Repeatability mm +/-0.003 Other Machine weight kg 6,033 Supply voltage V 3x400 Frequency Hz 50 Coolant tank / capacity l 208 Compressed air / pressure bar 6.9

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obremenitev mize: 200 kg, dolžina mize: 650 mm, skupna masa: 240 kg, višina mize: 400 mm, Horizontalna nosilnost: 200 kg Ljdpfx Adeyu Nb Eekohd Vertikalna nosilnost: 100 kg Navor: 407 Nm Zračnost: 0,025 mm Prenosno razmerje: 72:1 Delično razmerje: 2:1 Vključno z luneto MK 4 Vključno s pogonom Vključno s kablom Premer mize: Ø 315 mm Nosilnost mize: 200 kg Rotacija B-os: 0,001° Hitrost vrtenja B-osi: 4500 obr/min Dolžina: 650 mm Širina: 250 mm Višina: 400 mm Teža: 240 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Krmilna enota Blagovna znamka: HAAS Model: NGC Glavni pogon Lhodjx Enh Topfx Adkjd Število osi: 3 Pomiki Pomik osi X: 1270 mm Pomik osi Z: 635 mm Pomik osi Y: 508 mm Ta 3-osni vertikalni obdelovalni center HAAS VF-4 je bil izdelan leta 2020. Omogoča pomik v osi X 1270 mm, v osi Y 508 mm in v osi Z 635 mm ter podpira obremenitev mize do 1588 kg. Opremljen je z 20-postajnim linijskim zalogovnikom orodja, polžastim transporterjem ostružkov ter merilno sondo Renishaw OTS. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra HAAS VF-4. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe: Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.394 h, Funkcionalnost: popolnoma funkcionalen, HAAS control system Swing diameter: 641 mm Swing diameter over cross slide: 413 mm Max. turning diameter: 229 mm Max. turning length: 356 mm X-axis travel: 200 mm Y-axis travel: +/-50 mm Z-axis travel: 355 mm Max. bar capacity: 44 mm C-axis resolution: 0.01 degrees Spindle speed: 6,000 rpm Spindle nose: A2-5 Milling spindle speed: 6,000 rpm Rapid traverse X/Y/Z: 30.5 / 12.7 / 30.5 m/min Drive power: 11 kW Revolver: 12-position Mounting: VDI30 Weight: 3,600 kg Dimensions (LxWxH): 3048 x 2108 x 1803 mm Accessories / Equipment: - Programmable C-axis - Y-axis - Driven tool turret (all positions) - Integrated tool measuring arm - Chip conveyor Lhsdjwvf Thepfx Adkjd - 3-jaw chuck D160 mm - Tailstock The machine is in like-new condition and has seen very little use.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.168 h, Funkcionalnost: popolnoma funkcionalen, Control: HAAS Swing diameter: 641 mm Swing diameter over cross slide: 413 mm Maximum turning diameter: 229 mm Maximum turning length: 356 mm X-axis travel: 200 mm Z-axis travel: 355 mm Maximum bar diameter: 44 mm Spindle speed: 6,000 rpm Spindle nose: A2-5 Rapid traverse X/Z: 30.5 / 30.5 m/min Drive power: 11 kW Turret: 12-station Weight: 3,200 kg Dimensions (LxWxH): 3,048 x 2,108 x 1,803 mm Equipment & Accessories: - Integrated tool measuring arm Lhodpfx Aowvgbyodked - Chip conveyor - 3-jaw chuck, Ø160 mm - Without tailstock The machine is in like-new condition and has barely been used.