Groove Glodalica nakup rabljenega (1.276)

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” Ljdpfxed E Ixzj Afgjri • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Lredpfx Ashtuvrefgei Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Dovod 95 mm Premer osi 30 mm Obrati osi 7 obr/min Premer valjev 132 mm Pogon 0,75 kW Teža 220 kg Dimenzije D-Š-V 530x900x660 mm Oprema/Dodatki: Ljdpfx Afoyv N A Hogsri - Dva gnana valja z rebrasto površino - Ročni dovod zgornjega valja - Delovni položaj horizontalno in vertikalno (s preklopnim podstavkom) - Ležaji osi so stožčasti valjčni ležaji - Uporaba zamenljivih drsnih vodil na vodilnem vozičku - Standardni komplet valjev je priložen. Uporablja se za upogibanje različnih profilov, npr. ploščato železo, T-profil, polno gradivo itn.

Stanje: novo, Dimenzije tračne testere 2950x27x0,9 mm 2 brzine 36/72 m/min Otvor stege 285 mm Opseg sečenja pod 90 stepeni: okruglo 250 mm Opseg sečenja pod 90 stepeni: kvadrat 220 mm Opseg sečenja pod 90 stepeni: pločasto 280x220 mm Lrodpfeyv Nptox Afgei Opseg sečenja pod 45 stepeni: okruglo 230/200 mm Opseg sečenja pod 45 stepeni: kvadrat 200/170 mm Opseg sečenja pod 45 stepeni: pločasto 220x200/200x140 mm Opseg sečenja pod 60 stepeni: okruglo 120 mm Opseg sečenja pod 60 stepeni: kvadrat 80 mm Opseg sečenja pod 60 stepeni: pločasto 140x100 mm Snaga 1,5 / 1,8 kW Težina 440 kg Dimenzije 1700x1000x1650 mm - sa poluautomatskim spuštanjem - CUT CONTROL SYSTEM omogućava poluautomatsko spuštanje luka testere težinom glave testere - Brzina spuštanja se bezstupanjski podešava. Pojedinačni rezovi mogu se izvoditi sa ravnomernim napredovanjem - SHARK 282 CCS poseduje obrtni sto za obostrano sečenje pod uglom. Rez se uvek odvija u istoj brazdi

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9740 Dobavni rok: takoj, vmesna prodaja mogoča Država porekla: Turčija Cena: 6.200 € Leasing obrok: 119,66 € Na zalogi: 1 Dolžina upogibanja: 1.050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,1 kW Dolžina: 1.630 mm Širina: 700 mm Višina: 1.200 mm Teža: 480 kg 3 valji Asimetrična postavitev valjev Ledpowiqnwsfx Afgsri 2 pogonska valja preko zavornega motorja Nastavitev zadnjega valja z ročnim kolesom Reže za žico pri spodnjem in zadnjem valju Zgornji valj v odprtini Desni/levi tek z dvojnim pedalom Naprava za stožčasto valjanje Navodila za uporabo v NEMŠČINI

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4480, skupna dolžina: 14.500 mm, skupna širina: 7.800 mm, skupna višina: 3.500 mm, skupna masa: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-axis, 3-axis, MBG8, 5x SNA Equipment: 5-axis unit with gimbal-mounted spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 3-axis unit with vertically mounted spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 8-spindle drilling unit (1 pc): L-shape, Grotefeld Drilling spindles: individually selectable Rotation direction: clockwise/counterclockwise Hole pitch: 32 mm Power: 2.5 kW Speed: fixed at 5,000 rpm Z +75 Mount: D = 10 mm H7 Feed stroke: 80 mm Grooving unit (5 pcs): GROTEFELD angle saw unit F100-S Working/milling stroke pneumatically actuated. Lodpfxsywzq Sj Afgeri Drive: three-phase motor with Poly-V belt LEFT-hand design Drive rotation direction: clockwise/counterclockwise Speed ratio: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm n2 = 8,011 rpm at 50Hz Spindle power: 2.2 kW Feed rate: 150 mm Tool holder: ø30 x 1.5 mm – 5.0 mm Tool holder rotation: counter to drive rotation Feed force: 2,565 N Underfloor drilling unit in machine bed (1 pc): GROTEFELD angle milling head G06-1.1-P Working/drilling stroke pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation: right Speed ratio: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) for collet chuck ER25 DIN 6499-B, ø0.5–16 mm max. Tool holder rotation: right Flange clamp: FK45 Feed slide: with pneumatic cylinder, dual steel shafts Feed: 80 mm

Stanje: rabljeno, Leto izdelave: 2016, Used machine Cross-sanding automatic machine Year of manufacture: 2016 Product Advantages Beneath perfectly painted, stained, or oiled wood surfaces, there is always a perfectly sanded area! Felder sanding machines are distinguished by solid construction, state-of-the-art machine technology, and maximum productivity. Key highlights at a glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touchscreen control for work processes - The Felder operating concept ensures maximum process and work safety Your benefits at a glance: Time savings - Motorized adjustment of the contact roller in 1/100 mm increments from the control panel - Innovative unit arrangement for pre-sanding and fine sanding of veneered workpieces - Brush units at the machine outfeed - Lacquer sanding as optional additional equipment Convenience - Fixed feed table height (upper part of the machine is adjusted) - Touchscreen control with clear image display and program memory - Machine data acquisition for sanding belt wear and more - Tool-free handling when changing sanding belts - Large foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Infinitely variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit incl. chevron glide belt to compensate for oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard features Control system: finish 1350 classic Control unit with 7" touch color display, 100 program storage spaces, maintenance interval notifications Plain-text error messages Amperemeter for load monitoring Feed table Ljdpfsw I Uv Uex Afgeri - Fixed infeed height – stationary table, 900 mm - Electric height adjustment of units including fine adjustment from the control panel - Infinitely variable feed speed from 2.8–20 m/min adjustable by inverter from the control panel - Hand guard and workpiece overthickness protection - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless honeycomb structured belt conveyor - Automatic feed belt centering Cross sanding unit finish 1350C high gloss - Segmented, electronically-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads, sanding belt for homogeneous sanding without oscillation marks - Variable pressure regulation on the control side - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety - 1 motor with 7.5 kW (10 HP) - Star-delta starting - Cleaning blower with timer control - Cutting speed 12 m/s - Sanding belt 140 x 4560 mm Combined superfinish unit 1350C: - Rubber, grooved contact roller with 85–90° Shore hardness and 142 mm diameter - Electromotorically positioned grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure regulation on the control side - Chevron glide belt between sanding pad and sanding belt for homogeneous finish without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic sanding belt tracking safety

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Vacuum Press / Membrane Press “Columbus Infinity” (Vacuum press system for custom lengths with freely definable usable area) – includes digital master manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Infinity is a specialized vacuum press system designed for applications requiring particularly long usable surfaces. The machine can be configured to the customer’s requested length and is especially suitable for special laminations, long workpieces, and high-throughput series applications. The Infinity principle, which gives the system its name, allows for very efficient extension of the usable length. Combined with the rolling membrane system and multi-zone vacuum extraction, this machine offers high flexibility and precise vacuum control. Only the part of the working area that is actually being used is evacuated, saving energy and allowing for superior process control. Technical features: • Vacuum table with custom-configurable length • Rolling membrane system with manually guided linear carriage • Membrane stored on a reel for easy unwinding • Patented vacuum buffer tank integrated into the table frame • Multi-zone extraction for targeted activation of specific table sections • Table surface made of 21 mm birch phenolic plywood • Milled vacuum groove for reliable membrane sealing • Robust machine base made of welded steel construction • Adjustable machine feet • High-performance vacuum pump with 80 m³/h Possible working areas: Width and length are tailored individually to customer specifications. COLUMBUS machines are designed for long-term use and manufactured from high-quality industrial components. The robust design, proven branded components, and precise workmanship ensure long service life and reliable operation. Lsdpfx Afjytggcogeri Each COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes a digital master manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization and is supplied with a tablet for immediate use.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Vacuum Press / Membrane Press “Columbus Infinity” (Vacuum press system for custom lengths with freely definable usable area) – includes digital master manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Infinity is a specialized vacuum press system designed for applications requiring particularly long usable surfaces. The machine can be configured to the customer’s requested length and is especially suitable for special laminations, long workpieces, and high-throughput series applications. The Infinity principle, which gives the system its name, allows for very efficient extension of the usable length. Combined with the rolling membrane system and multi-zone vacuum extraction, this machine offers high flexibility and precise vacuum control. Only the part of the working area that is actually being used is evacuated, saving energy and allowing for superior process control. Technical features: • Vacuum table with custom-configurable length • Rolling membrane system with manually guided linear carriage • Membrane stored on a reel for easy unwinding Lrsdpfxjyaxw Ho Afgji • Patented vacuum buffer tank integrated into the table frame • Multi-zone extraction for targeted activation of specific table sections • Table surface made of 21 mm birch phenolic plywood • Milled vacuum groove for reliable membrane sealing • Robust machine base made of welded steel construction • Adjustable machine feet • High-performance vacuum pump with 80 m³/h Possible working areas: Width and length are tailored individually to customer specifications. COLUMBUS machines are designed for long-term use and manufactured from high-quality industrial components. The robust design, proven branded components, and precise workmanship ensure long service life and reliable operation. Each COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes a digital master manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization and is supplied with a tablet for immediate use.

Stanje: novo, Leto izdelave: 2026, Number of motors: 2 units Working length: 3000 mm Control: yes / CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Lredpevzt D Tefx Afgji Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Right head movable - Saw blade mount: Ø 350 mm - Including 1 pc. center support. - Pneumatic clamping of aggregates. - Position control Exenso DS3 with touch panel 15” display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swivel axes. - Manual entry of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring tape data (wireless caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - Including control cabinet, motor, and software licenses. Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS saw blade wood Bevel / bevel / flat tooth – positive Item 1.4 Article number 942.5236 2 sets of DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swivel clamp for clamping the material from above. (Free access to the work table) Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad. Clamps can be individually selected via saw’s control system. Clamping sequence can also be set through the control system. Including safety pre-clamping pressure Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swivel clamps - 2 pcs. (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 table support, slotted (standard slot; special slots per customer specification upon request) Item 3.1 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price for this configuration ex works – on request! ALTERNATIVE OPTIONS, prices on request! ----- For horizontal clamping of remnants when cutting square-cut glazing bars instead of 2nd set Item 1.3 943.5236 DS combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder holders with clamping lever ----- OPTIONAL accessories, at additional cost upon request: ----- Item 4.3 Article number 942.5237 DS software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. After input of a cutting length > max. cutting length of the unit, the cutting will be cycle-controlled. (Left unit cuts, right unit moves the material and cuts to size.) Item 2.1 Article number 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) incl. charger and receiver. A robust aluminium measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing bars. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Lrsdpfx Afsm Nntysgoi Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: rabljeno, Leto izdelave: 2007, Maximalni prečnik struganja 42 / 140 mm Dužina struganja 170 mm Upravljač Mitsubishi Meldas Obrtaji vretena 80–8.000 o/min C-osovina 0,001° Revolverska glava (x-puta) 2x 12 (VDI 20) pogonjena Obrtaji revolverske glave 45–4.500 o/min Snaga vretena 1 kW Lrsdpfx Afjvyli Eegsi Abgreif stanica 42 mm Obrtaji 60–6.000 o/min C-osovina 0,001° Broj upravljanih osa 8 Uređaj za stezanje steznih čaura 48 DIN 6343 Radni sati 10.769 h Transporter strugotine da/godina 2018 Ukupna snaga 7,5 / 11 kW Težina mašine cca. 3,3 t Dimenzije cca. 2,4 x 1,6 x 2,2 m CNC strugarsko-glodalica CITIZEN BOLEY BE 42, godina 2007 Simultani rad sa 7 osa na glavnom i prihvatnom vretenu Vrlo dobro stanje, radni sati 21.999 h (septembar 2024) Oprema: # razni nosači alata: 5x aksijalni pogonjeni nosač alata # stezno telo za stezne čaure, tip 173E # dodatni rashladni uređaj # transporter strugotine Knoll, godina proizvodnje 2018 Boley BE 42 se prodaje bez automatskog magazina za šipke. Interfejs za povezivanje postoji. Zamena kompletnog seta baterija izvršena 22.12.2025.

Stanje: dober (rabljeno), Leto izdelave: 2000, Ram stroke – max. 2 – 300 mm Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 rpm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Space requirement approx. 2.5 x 1.5 x 2.2 m The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of cutting speed with constant return speed, even during machining - Easy clamping of workpieces using standard clamping devices, no additional tooling required - Highest dimensional accuracy due to self-centering, centrally positioned tool holder - Feed rate can be changed during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable Ledpfeuayibox Afgeri

Stanje: novo, Condition: new Delivery time approx. 12 - 14 weeks from order Country of origin: Germany Bending length: 4010 mm Bending capacity for steel 400 N/mm²: 1.5 mm Bending capacity for aluminium 190 N/mm²: 2 mm Cutting capacity (electric shear): 1.5 mm Frame clamping units: 5 Number of driven bending elements: 5 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 3 kW Ledpfx Afsyrhtuegsri Length with hand shear: 4550 mm Length with electric shear: 5200 mm Width: 1435 mm Height: 1980 mm Weight: 2700 kg Max. bending angle: 145° Hydraulic drive Standard control system Attachment rail on the bending beam Double foot switch Retractable sheet metal support Wired groove Safety equipment according to the BG test principles Quality Made in Germany. OPTIONS SUCH AS CUTTING DEVICE, CNC CONTROL, BACK GAUGE ... UPON REQUEST Price ex works Germany. Transport and commissioning on site upon request.

Stanje: novo, Condition: new Delivery time approx. 12 - 14 weeks from order Country of origin: Germany Bending length: 6200 mm Bending capacity (steel, 400 N/mm²): 1.5 mm Bending capacity (aluminium, 190 N/mm²): 2 mm Cutting capacity (electric shear): 1.5 mm Number of frame clamping units: 7 Number of driven bending elements: 7 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 4 kW Length with electric shear: 7380 mm Width: 1435 mm Height: 1980 mm Weight: 3700 kg Max. bending angle: 145° Lredpeyrhtbjfx Afgsi Hydraulic drive Standard control Pressure rail on the bending beam Double foot switch Resettable sheet metal support Water groove Safety device according to BG test principles Quality: Made in Germany Options such as cutting unit, CNC control, backgauge etc. on request. Price ex works Germany. Transport and commissioning on site on request.

Stanje: novo, Condition: new Delivery time approx. 12 - 14 weeks from order Country of origin: Germany Bestseller 1 Bending length: 6200 mm Bending capacity steel 400 N/mm²: 1.25 mm Bending capacity aluminium 190 N/mm²: 2 mm Lredpfxeyrhr Re Afgji Frame clamping units: 5 Number of driven bending elements: 5 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 3 kW Length with electric shear: 7380 mm Width: 1435 mm Height: 1980 mm Weight: 3200 kg Max. bending angle: 145° Hydraulic drive Standard control system Attachment rail on the bending beam Double foot switch Resettable sheet support Swage groove Safety device according to BG test principles Quality "Made in Germany" OPTIONS SUCH AS CUTTING UNIT, CNC CONTROL, BACKGAUGE ... ON REQUEST Price ex works Germany. Transport and commissioning on site on request.

Stanje: novo, Condition: new Delivery time: approx. 12-14 weeks from order Country of origin: Germany Bestseller 1 Bending length: 4010 mm Bending capacity (steel, 400 N/mm²): 1.25 mm Bending capacity (aluminium, 190 N/mm²): 2 mm Cutting capacity electric shear: 1.25 mm Frame clamping units: 4 Number of driven bending elements: 4 Insertion depth: 1130 mm Opening width: 180 mm Working height: 915 mm Motor: 2.2 kW Length with electric shear: 5200 mm Width: 1435 mm Height: 1980 mm Weight: 2600 kg Max. bending angle: 145° Hydraulic drive Ledpfxsyrhqge Afgeri Standard control Front rail on the bending beam Double foot switch Retractable sheet rest Water groove Safety device according to BG test standards Quality made in Germany. OPTIONS SUCH AS CUTTING UNIT, CNC CONTROL, BACKGAUGE ... ON REQUEST Price ex works Germany. Transport and commissioning on site on request.

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis Lrjdpfx Aefin Saefgsi C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDER (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control / Software: PC 22 Feed speed (variable) m/min 18 - 32 Panel infeed system WZ 14/30 Joint trimming unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + pre-melter) 2 x PU 34 Lrodpfeinigmox Afgji Pressure zone (CNC-controlled) - Edge magazine for coil material (No. 12 positions) End trimming unit WK13 (CHAMFER / STRAIGHT Automatic adjustment) Pre-milling unit (2 x 0.55 kW) Pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copying milling unit (profile copying) FF 32 (4 x 0.4 kW) Automatic changeover device Contour milling unit (fine milling) CNC-controlled FK 31 (30 m/min), recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scrapers + smoothing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: generalkompletno obnovljen (rabljeno), Štiri-stranski skobeljni stroj znamke Weinig model U22N, po obnovi. Miza 22 cm z rebrasto delovno površino. 8 vreten v sestavi: - spodnje: 4 kW - desno: 5,5 kW - levo: 5,5 kW - desno: 7,5 kW - zgornje: 7,5 kW - spodnje: 5,5 kW - zgornje: 7,5 kW - univerzalno: 5,5 kW Pogonski motor: 4 kW Motor za dvig/spust: 0,85 kW Skupna moč: 53,35 kW Samodejno bočno podajanje. Zelo vsestranski stroj, primeren tako za dolge kose (s stranskim podajalnikom) kot za kratke kose (bližji pogon in rebrasta miza). Odlično ohranjen. Premer vreten: 400 mm Lsdpfx Aox Syrksfgsri

Stanje: rabljeno, Leto izdelave: 2007, Workspace: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel X-Y: 2980 x 1271 mm. Z-axis travel: 200 mm. Clearance height: 180 mm. The base structure is a monolithic design made of thick-walled steel, reinforced throughout the entire machine bed by fully welded triangular plates, resulting in extreme rigidity. The triangle shape with a wide base, used for all load-bearing components, is the secret to ensuring lasting precision and stability. The machine layout provides the operator with an optimal workflow while requiring minimal space. This base structure offers the machining unit a balanced and secure foundation with outstanding load distribution. The mobile aggregate support is constructed as a solid monoblock. It travels along the X-axis on precision-ground linear guides by means of recirculating ball bearing carriages. The machining unit is mounted to the mobile support via precision-ground linear guides and ball bearing carriages as well. Description of aggregates and standard accessories: Drilling unit: Drilling head with 10 + 4 spindles · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Chuck: M10 with 11 mm locating pin · Extraction port: D = 160 mm Vertical milling unit (Position 2) · Tool holder: HSK 63F · Speed: 1,500 - 24,000 rpm, variably adjustable via inverter · Motor output: 4.4 kW (6 HP) from 12,000 rpm (S1) · Clockwise / counterclockwise rotation · Ceramic bearings · Delivery includes: 4 tool holders (right), without collets Tool changer · Side-mounted tool magazine for 7 tools (TR7), fully enclosed to protect against chips · 7 tool stations for HSK 63F holders in sequence · Max. tool diameter: D = 120 mm · Max. weight per holder: 4.5 kg · Max. total tool weight: 20 kg (TR7) · Angle heads can be accommodated Horizontal milling unit (Position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 - 18,000 rpm, stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D = 120 mm / bore 50 mm) · Motor output: 3 kW (4 HP) · Max. tool diameter, front milling: 20 mm · Max. tool length, front milling: 110 mm · Max. tool diameter, rear milling: 12 mm · Max. tool length, rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade spindle diameter (ER 20): 12 mm Worktable The worktable is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility for precise positioning and optimal holding of workpieces. · 4 supports, 900 mm, infinitely variable adjustment in X · 8 round vacuum pods D = 110 mm, infinitely adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total: 6) · The retractable reference stops are CNC-controlled · Supplied: 4 plug-in adapters for suction pads · Standard feature: pendulum (dual-zone) operation Lrsdpfx Aex Twdyefgei Axis movement The drive system in X, Y, and Z uses ground recirculating ball screws of the highest precision class. The X-axis ball screw is positioned exactly along the centerline...

Stanje: rabljeno, Leto izdelave: 1995, Konstantni stroj - kombinirana postaja, krtača za prah - naprava za merjenje debeline - elektronska posamezna brusna čevelj MCS sistem Weber 32 mm - utorni jekleni kalibrirni valj - izpihovanje traku - vakuumska preproga. Širina brušenja: 1100 mm. Pogon: 15 kW. Podajanje ca. 1,1 kW. Nastavitev višine 0,25 kW. Dimenzije brusilnega traku: 1150 x 2500 mm. Maksimalna debelina obdelovanca: 150 mm. Širina stroja: 1700 mm. Dolžina stroja: 2000 mm. Višina stroja: 2160 + 150 mm. Teža stroja: 1900 kg. Konstantna delovna višina: 850 mm. Priklop za odsesavanje: trak 180 mm / krtača 120 mm. Količina sesalnega zraka: 0,74 m³/s. Priključna moč: 23 kW. Priključek za stisnjen zrak: 7 bar. Hitrost podajanja: 3–15 m/min. Delovnih ur: 7000 h. Lokacija skladišča: Nattheim Lredsx Twcpopfx Afgoi

Stanje: rabljeno, Leto izdelave: 2006, · Working area: 2,650 x 1,240 mm · Travel range X-Y: 2,995 x 1,385 mm · Z-axis travel: 200 mm · Clearance height: 180 mm The machine base structure is a monolithic design made of thick-walled steel. It is reinforced with welded triangular plates across the entire machine bed, providing exceptional stability. The use of the triangular shape with a broad base for load-bearing components is the key to long-lasting precision and stability. The layout of the machine allows the user to achieve optimal workflow while requiring minimal floor space. This design gives the processing unit a balanced and secure foundation with excellent load distribution. The moving aggregate carrier is constructed from a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball carriages. The processing unit itself is mounted on this mobile carrier, also on prismatic, ground guides and recirculating ball carriages. Description of units and accessories (basic version) Lodpfx Afjx Twccjgsri Drilling unit: Drill head with 12 + 6 spindles · 7 individually activatable vertical spindles in X · 5 individually activatable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm locating shoulder Grooving saw unit in X: · Integrated in the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed 1,500 – 24,000 rpm, steplessly via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Scope of delivery: 4 pcs. tool holders (right) without collet Tool changer R8L Automatic tool change system for 8 tools. Mounted on the rear aggregate carrier for rapid tool access. · Number of tool places: 8 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total tool weight: 22 kg · Holder for 1 angle gear · Moves in X-direction Horizontal milling unit (position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed 9,000 – 18,000 rpm steplessly via inverter · 1 output for collets 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (For saw D=120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. milling diameter front: 20 mm · Max. milling length front: 110 mm · Max. milling diameter rear: 12 mm · Max. milling length rear: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table The work table is designed to guarantee the operator maximum range of motion. The vacuum quick-clamping system provides maximum flexibility with precise positioning and optimal workpiece holding. · 6 rails, 1000 mm, continuously adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, continuously adjustable in Y (2 pieces per rail) · 2 stops in X (1 left / 1 right) · 1 stop in Y per rail (total 6 pcs) · The retractable reference stops are CNC-controlled · Pendulum machining standard (2 working zones) --- Other clamping systems available as options --- Axis movement The drive system in X, Y, and Z axes operates via ground recirculating ball screws of the highest precision class. The ball recirculation...

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Količina: 1 kos Na sliki je prikazano orodje Sandvik Coromant T-Max Q-Cut glava za odrezovanje, natančno identificirano s številko dela 570-40R1513-09-50. Proizvajalec: Sandvik Coromant Tip: T-Max Q-Cut glava za odrezovanje (utorno struženje) Priključek: SL-glava (vijačno pritrjena) – velikost 40 Stran: Desna izvedba Največja globina reza: 9 mm Lrsdpfx Afoyh Rl Njgoi Dovod hladilne tekočine: Aksialni, koncentrični vstop

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 Lrjdpfx Afjywk Eljgji - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.