Granit nakup rabljenega (250)

Stanje: zelo dobro (rabljeno), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measurement system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality control measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main Unit: Kfedpfx Ahex A Ur Ro Aja Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with probe holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measurement ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control Units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probe heads) Software and Documentation: MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operating instructions, training folders, training materials Sample measurements, diagrams, technical briefings This software is designed for the evaluation of contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts: Probe and stylus arm sets Precision probes of various shapes and lengths Spare needles and assembly tools Probe holder with protective box Calibration and reference bodies: Mahr Contour 2 block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/test badge visible (valid until 2026) Typical Voltage Data for the Mahr MarSurf / MidRange / CT Series: MarSurf CD 120 (Contour Measuring Device / Axis Drive) Powered via control unit Internal typically: 24 V DC External power supply via MidRange control unit Mahr MidRange Control Unit (MCP-21 / MCP-22 / MCP-23) This device acts as the central power supply. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Supplied by 24 V DC CT120 / Probing Systems Sensors operate with low voltage 5–24 V DC Powered by the main device (no separate power supply) Accessories, manual control devices, interface boxes Usually 5 V or 24 V DC, depending on the module Weight: approx. 65–73 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Changes and errors in technical data and specifications excepted!) Further questions can be answered by phone.

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 400 mm, merilno območje os Z: 270 mm,

Stanje: rabljeno, Leto izdelave: 2014, širina mize: 540 mm, dolžina mize: 660 mm, CONTROL SYSTEM .. CNC control system TECHNICAL DATA .. Generator current (max): 3600 A .. Clamping table surface length: 660 mm .. Clamping table surface width: 540 mm .. Workhead area: 375 mm .. .: 545 mm DIMENSIONS / WEIGHTS .. Space requirement -left/right-: 2200 mm .. Space requirement -front/back-: 2560 mm .. Overall height: 2870 mm The Precision Electrochemical Machining (PECM) process is an advancement of conventional electrochemical sinking. It enables the machining of high-precision tools—even those made from superalloys (Inconel, Hastelloy, etc.) as well as PM steels—without process-related tool wear. Machine frame made of natural granite Working area 800 mm x 640 mm (W x D) Machine table 660 mm x 540 mm (W x D) Maintenance-free precision working axis with direct drive Fixture mounting via 6 T-slot rails (M10) in the machine table Real-time system for process control and short-circuit detection Standard PC keyboard, mouse, and touchscreen Water-cooled, modular generator up to 3,600 A Automatic electrolyte preparation unit Ksdpfx Ahexu Uf Io Asfa - PEM Mechanics - PEM Control - PEM Power - PEM Aqua

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 500 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 400 mm, Oprema: Na voljo je tipska ploščica, Mitutoyo EURO M 574 merilni stroj za koordinatno merjenje v zelo dobrem stanju na prodaj. Brez računalnika in programske opreme. Leto izdelave: 1999 Brez PC-ja!!! X-os: 500 mm Y-os: 700 mm Z-os: 400 mm Ločljivost: 0,0005 mm Material merilne mize: granit Tipalo: Renishaw MH 20i Velikost granitnega ležišča: 850 mm x 1160 mm Standard dolžine: visokonatančni linearni dajalnik Centrirni mikroskop: Mitutoyo CF-10 Fiksacija in fino nastavljanje: Enostavna zračna klema za vsako os, brezstopenjsko fino nastavljanje po celotnem hodu vsake osi. Kedpfx Ahju E Uzxj Aofa Uporabna površina: 680 x 1160 Vpenjanje obdelovanca: navojni vložek M8 x 1,25 Obdelovanec: Razdalja med stebri: 720 mm Maksimalna višina: 480 mm Največja masa: 160 kg Brez PC-ja Merilna negotovost dolžine po ISO 10360 E = [3,5 + 4,0L/1000] µm pri temperaturi 18 do 22 °C Teža stroja: 450/540 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 66259, skupna dolžina: 800 mm, skupna masa: 500 kg, dolžina plošče: 670 mm, širina plošče: 450 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 04.12.2025! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 10.12.2025 in 12.12.2025! Stroj si lahko ogledate 25.11.2025! TEHNIČNI PODATKI Dimenzije plošče: 670 x 450 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 800 x 600 x 900 mm Skupna teža: 500 kg Kfodpjxvbxwofx Ah Aoa OPREMA Granitna merilna plošča Različni merilni instrumenti

Leto izdelave: 2016, obratovalne ure: 6.100 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Kruszarka szczękowa Powerscreen Premiertrak 400 HA – 2016, 6100 motogodzin Na sprzedaż: kruszarka szczękowa Powerscreen Premiertrak 400 HA (wersja przeznaczona do kruszenia twardych skał), w doskonałym stanie technicznym. Maszyna wyposażona w system HA (Hydraulic Adjustment) – umożliwiający szybkie i łatwe hydrauliczne ustawianie szczeliny szczęk, co znacznie usprawnia obsługę i skraca przestoje. Regularnie serwisowana, całkowicie sprawna – gotowa do natychmiastowego użycia. Dane techniczne: Ksdpexva Evjfx Ah Ajfa Marka: Powerscreen Model: Premiertrak 400 Rok produkcji: 2016 Przebieg: 6100 motogodzin Wlot szczęki: 1100 x 700 mm Silnik: Scania DC9 – 9,3 l, 257 kW (350 KM) Wydajność: do 400 t/h (w zależności od rodzaju materiału) Waga: ok. 46 ton Podajnik wibracyjny ze stopniowanym rusztem grizzly Przenośnik boczny do frakcji drobnej Separator magnetyczny nadtaśmowy Maszyna po pełnym przeglądzie serwisowym, w pełni gotowa do pracy, także w najtrudniejszych warunkach (kruszenie otoczaków, granitu, betonu oraz gruzu).

Stanje: novo, Leto izdelave: 2025, Holzkraft Edge Sanding Machine: KSO 150 F PRO Oscillating sanding belt for optimal sanding results Article number: 5390020 Brand: Holzkraft Kfjdev Sk Nnepfx Ah Asa Sanding unit tiltable via hand crank The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding performance Oscillation can be switched on or off as desired Graphite-coated sanding pad for increased belt service life Height-adjustable sanding table for utilizing the full belt width Additional table with extraction openings for sanding radii on the rubber-coated idler drum Sanding drum device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences Equipped with adjustable stops, ideal for veneer sanding The grooved veneer stop allows for precise sanding of veneer overhangs TECHNICAL DATA Dimensions and Weights Length (Product) approx.: 1700 mm Width/Depth (Product) approx.: 1000 mm Height (Product) approx.: 1150 mm Net Weight approx.: 300 kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Rated voltage: 400V Mains frequency: 50 Hz Oscillation motor power: 0.11 kW Sanding Unit Belt length: 2640 mm Belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Sanding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber drums Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Miter gauge

Stanje: dober (rabljeno), Technical Data: Kubria F/M 90/S Feature / Parameter Value / Information Application Area Secondary and tertiary crushing of hard rocks (e.g., granite, basalt, gneiss), ore, limestone, cement raw materials, etc. Crushing Concept Kfjdpfxexzk Urs Ah Aea Cone crusher: Material is crushed by compression between a stationary crushing ring and a rotating crushing cone. Cone Diameter (Lower Cone / Mantle) 900 mm Maximum Feed Size up to 150 mm edge length Closed Side Setting (CSS) 8 – 35 mm Feed Opening (max.) max. 180 mm (feed opening "f") Final Grain / Product Sizes (depending on adjustment) e.g., 0–16 mm, 0–22 mm, 0–32 mm Throughput Capacity (depending on material / setting) up to approx. 90 t/h (fine), up to approx. 110 t/h (medium), up to approx. 140 t/h (coarse / with larger screen & adjustment range) Main Dimensions (L × W × H) 1,960 mm × 1,550 mm × 2,460 mm Total Weight (without drive, electrics, hydraulics, controls) approx. 10 t Drive V-belt drive

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer brusilnega koluta: 720 mm, širina brušenja: 225 mm, Double-disc fine grinding machine Maximum stability due to solid granite construction Visualized control system Siemens S7 control High drive power, total 55 kW 3 separate drives with freely programmable rotational directions and ramping 6 runner discs Extensive service and monitoring software Kedewrpawjpfx Ah Asfa Working discs by arrangement (optional, to be quoted separately) Auxiliary unit centrifuge (optional, to be quoted separately)

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 460, največja hitrost vrtenja: 15.000 obr/min, nos vretena: HSK 63A, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljeni visokohitrostni 5-osni vertikalni obdelovalni center HERMLE C800U je srednje velik CNC stroj z portalno granitno konstrukcijo (tip gantry), teža 8.200 kg; hodi X 800, Y 500, Z 600 mm in 5-osna miza s ploščadjo premera 280 mm. Kedpfsxryfzox Ah Asfa Letnik izdelave 2000, s krmiljem HEIDENHAIN TNC 430, vreteno HSK 63A s 15.000 obr/min (maks. 19 kW), hlajeno s posebnim hladilnikom, pick-up menjalec orodij s 30 pozicijami ter oddaljeni ročni upravljalnik. Oprema zajema tudi transporter ostružkov KNOLL, notranje visokotlačno hlajenje vretena in brezžično 3D merilno sondo za obdelovanec RENISHAW MP10.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 24 meseci, vhodna napetost: 240 V, merilno območje os X: 280 mm, merilno območje os Z: 350 mm, skupna masa: 100 kg, teža obdelovanca (maks.): 50 kg, Oprema: Na voljo je tipska ploščica, High-End Air-Bearing Contour and Roughness Measurement System incl. Diameter Measurement and X-axis Probing! Training included within a 150 km radius !!! NEW – Systems now also available via leasing with a Leasing GmbH !!! ✅ Up to 30% declining-balance depreciation on movable assets* ✅ Valid for investments starting July 2025* ✅ T&S products are fully eligible for funding* Modular expandable contour measuring system Optional features upgradeable via software update: - Roughness testing option also according to ISO 21920!!! - Motorized Y support table - Rotational axis for contour and roughness - QS-Stat data export - GAS (Thread Axis Search): Thread measurement from internal thread M1 upwards - ConturoMatic software updates are FREE!!! Scope of delivery: Mechanics with aerostatic bearing measuring axes -Compressed air supply unit including: Particle filters 25µm/0.1µm, oil filter, and water separator Precision pressure regulator mounted on base plate with stand feet -Software option for roughness -Software for testing and evaluating the following roughness standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Test Sheet (SEP 1940) - Dust cover, robust, water-repellent, customs tariff no. 63079098 -PC W11/64Bit, 24" TFT flat screen -ConturoMatic software; user manual - Software for testing and evaluating the following roughness standard NEW! ISO 21920 DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) Ksdpfxowzlcaj Ah Ajfa DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Test Sheet (SEP 1940) - Dust cover 8988, robust, water-repellent Description of Z measuring direction switching: Thanks to the measuring direction switching, surface scanning is possible in 2 directions. This allows for evaluation of inner and outer contours relative to one another without loss of measurement reference. This function is fully usable in automated measurement programs. Additional evaluation possibilities include, for instance: - Determination of raceway diameters - Diameter measuring - Wall thickness measuring - Parallelism measuring - Taper angle measuring - Pitch inspection - Thread inspection Technical Data Contour Measurement: X measuring range: 280mm Z measuring range: 350mm Resolution: 1nm Optical incremental measuring systems Inaccuracy: +/-(0.85µm+L/100)µm* [L=mm] Probe force control Measuring speed: 0.1–3.0mm/s, auto-optimizing Positioning speed up to 25mm/s Table load capacity: 25kg, optional 50kg Precision guide on granite base Technical Data Roughness Measurement: Diamond stylus, tip radius R=2 µm/60° X measuring range: 280mm Z measuring range: 350mm Application range: Ra > 0.05μm | Rz > 0.5μm Probe force: 7.5mN Measuring speed: 0.1mm/s * under defined conditions - Technical modifications reserved - - Without clamping devices - Additional clamping devices available upon request - 2-year warranty - Photos may show special accessories not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide legal or tax advice on these topics. The above information must not be construed as advice. In case of doubt, please consult your relevant contact (specialist department or tax advisor).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna masa: 980 kg, merilno območje os X: 700 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 500 mm, Koordinatni merilni stroj Coord3 ARES NT 7.7.5 Leto izdelave: 2014 Motorizirana vrtljiva glava Renishaw PH10M Ročno upravljanje: Renishaw MCU LITE-2 MPEe natančnost: 2,5 µm + L/300 Ponavljivost: od 2,3 µm Merilno območje: 700 x 700 x 500 (mm) Velikost granitne postelje: 1330 x 963,5 x 170 mm Programska oprema: TouchDMIS 5.2 + dongle Kfedpfou E U Hbox Ah Asa Nosilni steber osi Z je iz silicijevega karbida, kar povečuje togost. DC servomotorji, zračni ležaji na vseh oseh, prosto lebdeče linearne merilne letve z ločljivostjo 0,1 µm.

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Na voljo je monoblok mostna žaga Denver za obdelavo trdih ploščatih materialov (marmor, granit, naravni kamen ipd.). Pomik X/Y/Z: 3500mm/1900mm/370mm, hitrost pomika: 16m/min, moč vretena: 11kW, hitrost vrtenja žaginega lista: 1400vrt/min, premer žaginega lista: 350mm-500mm, maks. debelina reza: 155mm, dimenzije mize X/Y: 3150mm/1750mm. Dimenzije stroja X/Y/Z: pribl. 5900mm/3000mm/2700mm, teža: pribl. 3400kg, krmiljenje: Osai. Dokumentacija na voljo. Ogled na lokaciji možen. Kedpfxjxlit Us Ah Ajfa

Leto izdelave: 2005, obratovalne ure: 900 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalna žaga GMM - Lexta 36 (4 osi) Kfsdpfx Ahsx A A Nwo Asa Večnamenska žaga za marmor, granit in kamen, ki zagotavlja visoko natančnost in enostavno uporabo. Značilnosti: - 4 osi - Miza: 3540x1850 mm - Disk: premer 800 mm - Zanesljiv in enostaven za uporabo stroj

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Naš stroj za oblačenje brusnih plošč do premera 450 mm vam nudi neprekosljivo kombinacijo enostavne uporabe in izjemne stabilnosti. Masivno granitno ležišče zagotavlja najvišjo natančnost in dolgo življenjsko dobo, uporabniku prijazen nadzor pa maksimizira učinkovitost vašega obrata. Medtem ko na vašem stroju za ostrenje orodij nadaljujete s proizvodnjo, z našim strojem za oblačenje prihranite čas in denar. Zdaj na voljo po izjemni akcijski ceni. Kedpfx Aexqpigsh Asfa

Stanje: rabljeno, SincoTec Model: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT from SincoTec is a high-performance resonance test bench designed for fatigue testing of materials and components. The system enables dynamic load tests with high forces (up to ±100 kN) and precise control. Typical applications include lifetime testing, fatigue strength assessments, and component validation under realistic conditions. Thanks to its robust construction, precise sensors, and stable granite table, this test bench is ideally suited for research, development, and quality control in industry and academia. Notes: The resonance test bench is ideally suited for material and component testing under dynamic loading conditions. Technical Data: General Data – Test Bench: Overall height: 1215 mm (without clamping device) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: min. Class 1 (according to DIN EN 10002-3) Kfedpfxoxrlkvs Ah Aea Control Cabinet: Total height: approx. 1800 mm Tabletop height: 1080 mm Width: 650 mm (narrow table) / 1420 mm (wide table) Depth: 700 mm Weight: 180 kg (with granite tabletop approx. 240 kg) Color: RAL 9006 (white aluminum), tabletop Midnight Installation Requirements: Required floor space: 4.3 × 3.0 m Required ceiling height: min. 2.5 m Floor load-bearing capacity: 2.0 t/m² Power supply: 400 V / 50 Hz (three-phase, right-hand rotating field) Connection: CEE plug 5-pin, 16 A Fuse protection: 16 A Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 18 meseci, vhodna napetost: 240 V, merilno območje os X: 250 mm, merilno območje os Z: 320 mm, skupna masa: 100 kg, dolžina podajanja os X: 250 mm, dolžina podajanja os Z: 320 mm, Oprema: Na voljo je tipska ploščica, Modular expandable base contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Free commissioning and training within a 150km radius - Free software updates for contour software - Up/down measurement direction switching - Roughness testing - Motorized Y-axis support table - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) - Dominant waviness Scope of delivery: - Complete mechanics with Y-axis adjustment table (17mm travel) - Integrated control unit Kfjdpfx Ahexgqlhe Aoa - PC W11/64Bit; 24" TFT flat screen - ConturoMatic software; operating instructions - Dust cover, robust design, water-repellent Technical data: Measuring range X: 250mm Measuring range Z: 320mm Resolution: 1nm Measuring systems: optical incremental System accuracy: +/- (0.9μm + L/100)μm* [L=mm] Probing force control Measuring speed: 0.1–3.0mm/s, auto-optimizing Positioning speed: up to 25mm/s Table load capacity: 35kg Precision guideway on granite base Weight: 95kg - 18 months warranty from delivery date -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.000 mm, merilno območje osi Y: 600 mm, merilno območje os Z: 500 mm, vhodna napetost: 220 V, leto zadnje generalne obnove: 2018, Oprema: Na voljo je tipska ploščica, CNC 3D merilni stroj model: WENZEL 6 10 5 CNC + MIH + TP20 + stilusi ● Leto: 2002 ● Koristni hodi: 600 x 1000 x 500 mm ● Popolnoma CNC vodenje ● Visoko stabilna granitna struktura ● Vodila na zračnih blazinah ● Natančen, tog in zanesljiv stroj Vključena oprema: ● Renishaw MIH ročno indeksirna glava Kedpfex Ebx Asx Ah Ajfa ● Renishaw TP20 tipalo z moduli ● Renishaw komplet stilusov ● CNC komandna omarica ● Popolna elektronska omara ● PC + merilna programska oprema (če je prisotna → navesti) ● Vpenjalna plošča / dodatki ● Dokumentacija Stanje: ● Zelo čist in vzdrževan stroj ● Zadnja merilna kontrola: 2018 ● Stroj pod napetostjo → možna demonstracija ● Tekoče osi, brez nenormalnih zračnosti Transport: ● Razstavljanje in prevoz na stroške kupca

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 400 kg, skupna dolžina: 4.000 mm, skupna širina: 700 mm, skupna višina: 1.000 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Delovne mize se dražijo zaradi zaprtja podjetja. Oddaja ponudbe zavezuje k prevzemu v obdobju od 26.01.2026 do 29.01.2026! Na dražbi sta dve delovni mizi. Vsebina vključuje: Razni vijaki in pritrdilni elementi BOTT granitna merilna plošča Merilni stativi PODROBNOSTI STROJA Kfjdexqpuijpfx Ah Aja Dimenzije in teža Dimenzije (D x Š x V): 4.000 x 700 x 1.000 mm Teža: 400 kg

Stanje: zelo dobro (rabljeno), Asecos Extraction Unit Weighing workstation with fresh air curtain Airflow test according to DIN EN 14175-3 (5.4.4) Compliance with prescribed workplace exposure limits Construction made of chemically resistant, plastic-coated sheet steel Vibration-free placement of an analytical balance on a granite block decoupled from the hazardous substances workstation No displacement of weighing material due to fresh air curtain in the front area External dimensions (WxHxD): 1200 x 1300 x 850 mm Internal dimensions (WxHxD): 1180 x 1260 x 500 mm Condition: used Kfodpfxsvydzas Ah Aoa Scope of delivery: (Asecos extraction unit) (Subject to technical changes and errors in the specifications!) If you have further questions, we would be happy to answer them by phone.

Stanje: rabljeno, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance carried out General Information For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test stand operated in single-shift use, and all maintenance was regularly performed by the manufacturer. Special features: - Robust construction for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance record available - Ideal for research, testing, and development applications Technical Data – Test Stand Feature / Value Total height of test stand: 1215 mm (without clamping device) Width of test stand: 2005 mm Depth of test stand: 1205 mm Kodpfsxrffajx Ah Ajfa Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy, min.: Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value Total height of control cabinet: approx. 1800 mm Tabletop height: 1080 mm Control cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Control cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight: 152 kg (small tabletop), 187 kg (large tabletop), with granite tabletop 247 kg Location Requirements Feature / Value Required space: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase rotation: clockwise Voltage fluctuations: ≤ ±10 % Short interruptions: < 20 ms Limits for continuous disturbances: Radio interference level A in accordance with VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / ground resistance: < 0.3 Ω Connection and Protection Feature / Value Power supply: 400 V / 50 Hz (clockwise rotation) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test stand weight: approx. 3.6 t Maximum clamping device weight: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; all information provided without liability!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes using ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Kfedpfx Ahelddmzs Aea Features: - Precise temperature and humidity control - Weather station (p, t, h) for buoyancy correction - Dew point mirror (optional) - Vibration-damped granite for low-vibration installation of an ultra-microbalance - Ionization device against static charge - Airflow protection for shielding the weigh cell - Touch panel for intuitive operation - Ethernet interface for process data exchange - Interior with sockets, grounding bolts Advantages: - Fulfills regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) - Tested, ready-to-connect unit Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% r.H. ± 3% Dimensions (W/D/H): 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Power supply: 400 V, 15 A, 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Johansson coordinate measuring machine. The coordinate measuring machine for measuring large workpieces. Measuring device: Johansson Cordimatic 7000 with Renishaw retrofit (controller, rotary and swivel probe & probe change library) Johansson Measuring Device Cordimatic 7000 with Renishaw rotary/swivel head PH10T Kfjdpfx Aog Iiqfjh Aja Measuring range – 28" x 17" x 13.5" Granite table size – 42" x 28" x 8" Equipped with: - Computer - Metrologic 1 joystick pendant control - Metrologic software manuals - Joystick and control unit by RENISHAW - SPA2 servo power amplifier - UCC2 controller Type: Johansson Cordimatic 7000 Coordinate Measuring Machine Condition: used Scope of delivery: (See picture) (Specifications and data may be subject to changes and errors!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Hexagon Type: Hexagon Optiv Performance 442 Product Description: The Optiv Performance 442 is a 3D multi-sensor coordinate measuring machine that combines optical and tactile measurement in a single system. The system supports multi-sensor measurement with vision sensor, tactile probe, TTL laser (Through-The-Lens), as well as the innovative Chromatic White Light Sensor (CWS). The base unit with vision sensor can be modularly upgraded with all available sensors. Applications: - For use on level surfaces - Versatile geometry measurements and GD&T analysis with standard accuracy Construction: • Vibration-dampening granite frame with fixed bridge and movable table • Integrated base with optional vibration dampers Guides: • Precision mechanical linear guides on all axes Drives: • DC servo motors with backlash-free ball screw drives located at the center of gravity Length Measuring System: • Incremental length measuring system Resolution: • 0.1 μm The Hexagon Optiv 442 multi-sensor measuring device is equipped with camera, laser, and Renishaw probing system. • Measuring range per single sensor: 410x410x200 mm • Dimensions: 1232x910x1663 mm • Weight: approx. 940 kg • Max. load (glass plate): 30 kg • Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) • Max. axis travel speed: 200 mm/s • Camera with 2-step zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine: HEXAGON Optiv 442 Electrical specs: Voltage: 115/230 V ±10% Frequency: 50/60 Hz ±5% Power consumption: 1000 VA Weight: approx. 1100 kg Kfsdpfx Aeu Szpmeh Aja Condition: used Scope of delivery: (see picture) (Subject to technical data changes and errors!) If you have further questions, please feel free to contact us by phone.