Gildemeister Gmx nakup rabljenega (224)

Stanje: rabljeno, Leto izdelave: 2007, Premer struženja 246 mm Dolžina struženja 445 mm Krmiljenje Fanuc 32 Ijdpfx Aoxuv R Seh Aotr Teža stroja pribl. 4250 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K cycle-controlled lathe with Siemens Sinumerik 810 DL control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Itsdpfx Ahjw Iqd Ij Aer Centre distance: 1,500 mm Main spindle: Speed range – main spindle: 8–3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Number of gear stages: 2 Spindle nose: No. 8 DIN 55027 Spindle bore at front bearing: 120 mm Usable bar capacity: 62 mm Spindle taper: ME80 Chuck diameter: 250 mm Tool carrier: Tool system: MultiFIX – C Tailstock: Quill diameter: 80 mm Quill taper: MK 5 Quill stroke: 180 mm Feeds: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total connected load: 28 kVA Machine weight approx.: 3.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 piece coolant system About the machine: We are offering a Gildemeister NEF 520 K lathe with automatic cycle, year 2012, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Gildemeister runs very quietly. This newer generation of lathes is very operator-friendly, and surfaces with a ground finish can be produced. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.500 obr/min, prehod palice: 42 mm, Premer palice (maks.): 42 mm, Proizvodni stružnica Gildemeister Sprint 42 - 8 linearnih osi s visokotlačnim sistemom in podajalnikom palic Iemca Leto izdelave: 2017 Krmiljenje: Fanuc 31l Delovne ure: pribl. 20.000 h Izvedba z 8 osmi – linearni pogon na osi X1 Hitrost vrtenja glavnega in protivretena: 6.500 min-1 Največji premer prehoda palice: 42 mm Hladilni sistem: Sanice 1: 8 bar Sanice 2 + Y: 20 bar Isdpfx Asxbpp Ueh Astr Podajalnik palic: Iemca BOSS 552/32 Transportni trak za dele

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Itsdpfx Aeur Hfzoh Aer

Stanje: rabljeno, Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, skupna širina: 45.000 mm, skupna dolžina: 19.900 mm, skupna višina: 23.000 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 80 mm, dolžina letve: 600 mm, Gildemeister Sprint 65 Linear CNC stružnica (z drugo glavno gredjo, tremi revolverskimi glavami in Y-osjo) Premer odprtine vretena: 65 mm Število vrtljajev vretena: 5.000 vrt/min Motor vretena: 25/20 kW Ijdoxnmxmopfx Ah Ajtr Število vrtljajev protivretena: 5.000 vrt/min Pomik X-osi: 165 / 165 / 165 mm Pomik Y-osi: 80 mm Pomik Z-osi: 220 / 150 / 650 mm Pomik W-osi (protivreteno do glavnega vretena): 690 mm Indeksiranje C-osi: 0,0001° Število revolverjev: 3 Število orodij na revolver: 12 (3 x 12) Orodni nosilec: VDI 30 Polnilec palic: LNS Quick Load Servo 65 Za vsa vprašanja v zvezi s strojem ali za dogovor o ogledu nas, prosimo, kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše druge oglase, da pridobite popoln pregled nad našo zalogo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, obratovalne ure: 65.543 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 501637, največja hitrost vrtenja: 4.500 obr/min, Premer palice (maks.): 65 mm, število mest v zalogovniku orodij: 16, Oprema: dokumentacija / priročnik, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control unit: Sinumerik 840C Bar loader: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Sub-spindle: 3-jaw chuck Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for threading: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool turret Number of tools: 8 Shank diameter to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Iodpfx Aowkp Ifoh Aetr Max. speed, tool turret 1: 4,000 rpm Max. speed, tool turret 2: 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions incl. bar loader and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Finished parts catcher - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar loader - Includes 2 tool holders

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Iodpfowwv Ifjx Ah Aotr Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe, Siemens Sinumerik 810 DL CNC, Year of Manufacture: 2001, Very Good Original Condition Technical Data: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Distance between centers: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min X rapid traverse: 8 m/min Y rapid traverse: 10 m/min Spindle nose: DIN 55027 size 6 Spindle bore: 52 mm Ijdpjwx Rbpofx Ah Astr Main drive power (100%): 7 kW Speed range: 14–3,550 rpm (2 steps) Quill diameter (tailstock): 70 mm Quill stroke (tailstock): 120 mm Quill taper (tailstock): ISO MK 5 Dimensions: 2,600 x 1,440 x 1,440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: For sale is a Gildemeister NEF 320 K cycle-controlled lathe, year 2001, in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and uniformly. Even at high speeds, the Gildemeister operates very quietly. This newer generation of lathes is highly user-friendly and enables the production of ground-like surface finishes. The machine comes from a training workshop of a large company. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 2003, max. spindle speed: 5,000 rpm X-axis travel: 160 mm Z-axis travel: 450 mm Number of turret stations: 12 Tool holder: VDI 30 Iedpfov Ehawsx Ah Aotr Control: Heidenhain iT Plus Dimensions (L x W x H): 4.5 x 2.5 x 2.5 m Machine weight: 3,700 kg Technical Specifications: Main spindle: - Max. speed range: 6,000 rpm - Drive power: 16 kW - Max. torque: 155 Nm - Spindle nose: 140H5 Travel: - X-axis: 160 mm - Z-axis: 450 mm Rapid traverses: - X-axis rapid traverse: 60 m/min - Z-axis rapid traverse: 45 m/min - C-axis rapid traverse: 200 rpm Feed force: - X-axis feed force: 2.5 kN - Z-axis feed force: 4.0 kN Turret: - Max. tool stations: 12 positions - Driven tool stations: 12 positions - Max. driven tool speed: 5,000 rpm - Driven tool power: 10 kW - Tool holder: VDI 30 - Tool shank: 20 x 20 mm - Control: Heidenhain iT Plus - Hollow chuck cylinder: VNK 130/52 - Including C-axis and live tooling - Chip conveyor - Oil and coolant mist extractor with electrostatic filter

Stanje: rabljeno, Leto izdelave: 2003, Turning diameter: 210 mm Turning length: 580 mm Control: Siemens 840 D Center height: 190 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 260 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 10 / 7.5 kW Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm C-axis: 0.001° Travel - X: 185 mm Travel - Z: 455 mm Isdpfstqmmujx Ah Astr Number of tool stations: 12 positions Tool holder: VDI 30 Driven tool stations: 6 positions Tailstock quill travel: 400 mm Max. drawbar force: 4,000 N Rapid traverse X/Z: 20 / 30 m/min Feed force: 4.5 kN Total connected load: 21 kW Machine weight approx.: 3.2 t Space requirements approx.: 8.0 x 2.2 x 2.0 m CNC Turning and Milling Center GILDEMEISTER - CTX 310 V3 - incl. IRCO Breuning bar loader - incl. 2x collet chucks - incl. 2x three-jaw chucks incl. various soft and hard jaws - various VDI30 turning tool holders - various coolant pipes - approx. 20x 173E collets - Adapter sleeve for 185E collets (for bars up to Ø50) - 11x 185E collets

Stanje: rabljeno, Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, skupna širina: 45.000 mm, skupna dolžina: 19.900 mm, skupna višina: 23.000 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 80 mm, dolžina letve: 600 mm, Gildemeister Sprint 65 Linear CNC stružnica (z drugo glavno gredjo, tremi revolverskimi glavami in Y-osjo) Premer odprtine vretena: 65 mm Število vrtljajev vretena: 5.000 vrt/min Motor vretena: 25/20 kW Število vrtljajev protivretena: 5.000 vrt/min Pomik X-osi: 165 / 165 / 165 mm Pomik Y-osi: 80 mm Pomik Z-osi: 220 / 150 / 650 mm Pomik W-osi (protivreteno do glavnega vretena): 690 mm Indeksiranje C-osi: 0,0001° Število revolverjev: 3 Število orodij na revolver: 12 (3 x 12) Orodni nosilec: VDI 30 Polnilec palic: LNS Quick Load Servo 65 Za vsa vprašanja v zvezi s strojem ali za dogovor o ogledu nas, prosimo, kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše druge oglase, da pridobite popoln pregled nad našo zalogo. Itodpsxnmvfefx Ah Ajr

Stanje: rabljeno, Leto izdelave: 2009, Swing diameter 410 mm Turning length 800 mm Swing over bed 700 mm Control Heidenhain TurnPlus IT CNC Pilot Spindle bore Ø 65 mm (partial hollow chuck) Spindle speed: 25–5000 rpm Spindle drive 25 kW Spindle torque 280 Nm Number of tools in turret 1: 12 VDI 40 Number of driven tools: 12 VDI 40 Driven tool speed: 4000 rpm Milling spindle drive: 5.6 / 11.3 kW y-axis travel +/- 60 mm Sub-spindle: 15 kW Sub-spindle speed: 20–6000 rpm Rapid traverse: 30 / 22.5 / 30 m/min Tailstock: Subspindle (counter spindle) Dimensions (L x W x H): 4.7 x 2.7 x 2.0 m Machine weight approx. 6.5 t CNC lathe with driven tools, Y-axis, and sub-spindle. - 3-jaw chuck SMW 315 BH main spindle - 3-jaw chuck SMW 250 BH sub-spindle - Chip conveyor - LTA oil mist extraction system Iedpfx Asurnggeh Astr - Coolant gun - Automatic door - Partial hollow chuck Ø 65 x 840 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, obratovalne ure: 26.000 h, potovalna razdalja osi X: 725 mm, pomik osi Y: 50 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 11 W, hitrost vretena (min.): 5.000 obr/min, skupna dolžina: 3.171 mm, skupna višina: 2.648 mm, skupna širina: 4.254 mm, skupna masa: 6.000 kg, CNC Control: SIEMENS SINUMERIK 840D-ERGOLINE Capabilities Travel X-axis mm: 725 Travel Y-axis mm: ± 50 Travel Z-axis mm: 300 Turning length mm: 160 Max. turning diameter mm: ø 250 Swing over bed mm: ø 320 Tool Magazine Number of tool stations: 16 Tool holder: VDI-30 Max. tool length mm: 390 Max. tool diameter mm: 140 Lower turret Number of tool stations: 12 Max. speed for driven tools rpm: 4,000 Driven tool power kW: 11.7 Milling function: Yes Itsdpfx Aoxf Hlbeh Ajr Main spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11.7 (40% duty cycle) Max. torque Nm: 280 / 360 (100% / 40% duty cycle) Cooling system Tank capacity liters: 980 L High-pressure cooling bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Blow air/coolant switch Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Machine operating time: Power-on hours: 38,000 Cutting time: 26,000 Base machine: Dimensions/Weight Length mm: 3,171 Width mm: 4,254 Height mm: 2,648 Weight kg: 6,000

Stanje: potreben popravila (rabljeno), Leto izdelave: 2011, obratovalne ure: 8.545 h, Funkcionalnost: nefunkcionalno, stružna dolžina: 310 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 190 mm, pomik osi Y: 80 mm, pomik po osi Z: 370 mm, montažni premer: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Itedew T Srdspfx Ah Aer Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours (power on): 36,443 h Main spindle operating hours: 8,545 h Interface: yes EQUIPMENT - 3-jaw chuck 160 mm with matching flange - 2 sets of spare jaws - Turret head for 12 tools with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck installed – no hydraulic power chuck - Electrical cabinet with Rittal cooling

Stanje: rabljeno, TEHNIČNI PODATKI - Največji premer palice: 12,7 [mm] - Pomik X: 85 [mm] - Pomik Y: 150 [mm] - Pomik Z: 160 [mm] - Hitrost vretena: 12000 [obr/min] - Število osi: 5 OPREMA - Krmilje: Fanuc 18 i-T - Magazin za palice: IEMCA CH 220 Tip 32 L Ijdpsuy Uywofx Ah Aetr - Odvod oljne megle: LTA Basic line 01

Stanje: rabljeno, Leto izdelave: 2013, Maximum turning diameter: 20 mm Maximum turning length: 80 mm Control: Fanuc 310is Main spindle: - Maximum usable bar diameter: 20 (25) mm - Internal draw tube diameter: 28.5 mm - Max. spindle speed: 10,000 rpm - Drive power – main spindle: 3.7 kW - Max. torque: 9.4 Nm - C-axis C1: 360° Counter spindle: - Internal draw tube diameter: 28.5 mm - Max. spindle speed: 10,000 rpm - Drive power – counter spindle: 3.7 kW - Max. torque: 9.4 Nm - C-axis C2: 360° Travel distances: - X-axis 1: 50 mm / 2: 240 mm - Y-axis 1: 350 mm / 2: 120 mm - Z-axis 1: 80 mm / 2: 300 mm Tool carrier slide 1: - Number of tool positions: 17 - Internal machining: 6 - External machining: 6 - Driven stations: 5 - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet chuck diameter ESX/ER: 16 - Driven tool speed: 3x 3,450 / 2x 6,000 rpm Isdpfxotqmnno Ah Aotr - Power – driven tooling stations: 5x 0.98 kW - Max. torque: 3x 4 / 2x 2.3 Nm Tool carrier slide 2: - Number of tool positions: 13 - Internal machining: 4 - External machining: 4 - Driven stations: 5 - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet chuck diameter ESX/ER: 16 - Driven tool speed: 3x 3,450 / 2x 6,000 rpm - Power – driven tooling stations: 5x 0.98 kW - Max. torque: 3x 4 / 2x 2.3 Nm Feed: - Rapid traverse (X / Y / Z): max. 40 m/min - Max. feed force: 2.5 kN - Max. acceleration: 5 m/s² Total power requirement: 56 kVA Machine weight: approx. 4.8 t Space requirement: approx. 8.0 x 2.5 x 2.0 m CNC turning center GILDEMEISTER Sprint 20-8 - 8 axes (2x X / 2x Y / 2x Z / 2x C) - Main and counter spindle - Bar feeder magazine FMB turbo 3-36/3200A - Coolant system DELTATHERM

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, CNC stružnica GILDEMEISTER CTX 420 Linear Leto: 2007 Krmiljenje Siemens 840 D Tehnični podatki: Isdpfxsw Slfbj Ah Aotr * Dolžina struženja: 600 mm * Premer struženja: 680 mm * Prehod glavnega vretena: 79 mm * Hitrost vrtenja min-1: 5000 * Moč glavnega vretena: 25 kW * Transporter za odrezke: Da * Variabilna hitrost vrtenja: 5000 obr/min Glavno vreteno s prehodom za palico: Ø 65 mm Samo-centrirna glava Autoblock: Ø 250 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, STRUŽNICA GILDEMEISTER GS20 VARIANTA 25 MM Električno in mehansko obnovljena - Pnevmatska vpenjalna glava za končno obdelavo obnovljena - Nova skupina za pripravo zraka in elektromagnetni ventili - Radialni in aksialni vozički na poz. 1-2-4-5 - Primem kos na poziciji 6 MEHANSKA REVIZIJA: 1. Revizija bobna 2. Revizija vozičkov 3. Revizija čelnih delov in ročic 4. Revizija vreten 5. Revizija odpiranja/zapiranja vpenjalne glave 6. Revizija navojnega sklopa ELEKTRIČNA REVIZIJA: 1. Nov PLC Siemens S71200 in panel Siemens KTP700 Itodpfxow Sxptj Ah Aer 2. Cam encoder 3. Zamenjava relejev

Stanje: dober (rabljeno), Leto izdelave: 1997, - Krmiljenje: SIEMENS SINUMERIK 840-C - Maks. premer palice: 65 mm - C-os - Hitrost glavnega vretena: 31 - 6.300 1/min - Revolver 1: 8 postaj, od tega 4 pogonske - Revolver 2: 8 postaj, od tega 4 pogonske - Hitrost pogonjenih orodij: 4.000 1/min - Oba revolverja z notranjim hlajenjem - Visokotlačna naprava - Transporter ostružkov - Podajalnik palic IRCO SiMag 65 - Maks. dolžina palice: 3200 mm Dimenzije D x Š x V: - Stroj 3400 x 1700 x 1800 mm - Podajalnik palic 4000 x 1000 x 1400 mm - Transporter ostružkov 3000 x 1100 x 1600 mm Skupna teža: ca. 6.000 kg Iedpfxjxa Epbo Ah Aetr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 44.078 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8089000198B, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, prehod palice: 60 mm, model krmilnika: Fanuc 31i MSL 42-7 60-742-7, največja hitrost protivretena: 5.000 obr/min, Turning machine with comprehensive equipment! TECHNICAL DETAILS Main Spindle Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Sub-Spindle Spindle speed: 5,000 rpm Maximum turning diameter: 42 mm Axes Travels Traverse path X1 / X2 / X3: 60 mm Traverse path X4: 130 mm Traverse path Z2: 80 mm Traverse path Z3: 80 mm Traverse path Z4: 340 mm MACHINE DETAILS Total weight: 3,500 kg Control: Fanuc 31i MSL 42-7 60-742-7 Spindle hours: 44,078 h Operating hours: 64,405 h EQUIPMENT Chip conveyor with hinge belt Bar feeder preparation Iedpfxew Nqa Ee Ah Aotr Electrical and software preparation Radially driven tools Powered drilling and milling attachments 4-position base holder, slide 3 Drilling and milling unit Axially driven tools Double tool holder Collet ER 11 Tool holder 20x20 mm, slide Drill holder for turret Tool holder for rear machining and slide for backworking Tool holder 20x20 for backworking Drill holder diameter 32 mm Collet chuck holder for main spindle Collet chuck holder for sub-spindle Collet chuck ROEHM KFD HS 112-3 Tool wear monitoring software for Fanuc C-axis main spindle

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Itodpfx Ahst Hwvas Asr Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2004, Maximum turning diameter: 560 mm Turning length: 600 mm Control: Siemens 840D powerline Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Centre distance: 620 mm Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 25 / 37 kW Max. torque: 390 Nm Spindle nose: 170H5 Spindle bearing diameter: 120 mm Usable bar diameter: 65 mm Max. chuck diameter: 250 mm C-axis: 0.025° / 360° Counter-spindle speed range: 20 - 7,000 rpm Counter-spindle drive power: 25 / 33 kW Max. torque (counter-spindle): 213 Nm Counter-spindle bearing diameter: 90 mm Spindle bore: 57 mm Counter-spindle nose: 140H5 C-axis (counter-spindle): 0.025° / 360° Number of tool positions: 12 Number of driven tool stations: 12 Speed range - driven tools: max. 4,500 rpm Drive power - driven tools: 12.2 kW Tool holder: VDI 40 DIN 69880 Tool shank: 40 mm X-axis travel: 185 mm Y-axis travel: 80 mm Z-axis travel: 620 mm Itodpswmf Tpefx Ah Aor Rapid traverse X: 60 m/min Rapid traverse Y: 15 m/min Rapid traverse Z: 45 m/min Total power requirement: 50 kVA Machine weight: approx. 7 t Space requirements: approx. 6.0 x 3.0 x 2.5 m CNC turning and milling centre GILDEMEISTER - CTX 420 linear V6 - Main and counter spindle - Driven tools - C-axis / Y-axis - Partial hollow clamping device - ShopTurn interface - incl. 2x driven tools - incl. 4x double tool holders - incl. 4x tool holders - incl. 83x tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, CNC stružnica Gildemeister CTX 200 E Leto izdelave: 1998 CNC krmilje Heidenhain Itodpfx Ahsw I Swcs Aer Tehnični podatki: CNC krmilje: Heidenhain Maksimalna dolžina struženja: 350 mm Maksimalni premer struženja: 160 mm Maksimalni premer palice: fi 42 mm Kapaciteta revolverske glave: 12 kosov (gnane) Največja hitrost vretena: 5000 obr./min Moč pogona vretena: 7,5 kW Oprema CNC stružnice: Vpenjalno vreteno Gonilna orodja Podajalnik palic: IEMCA VIP 70 CNC Nosilci in čeljusti za orodja

Stanje: rabljeno, Leto izdelave: 2009, Turning length 600 mm Max. turning diameter 320 mm Swing diameter over bed 365 mm Control system: CNC Pilot 4290 Heidenhain Spindle speed range - main spindle: max. 5,000 rpm Drive power - main spindle: 28 / 21 kW Max. torque: 320 / 240 Nm Spindle nose: 170h5 Chuck diameter: 215 mm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar diameter: 65 mm Number of tool positions: 12 positions Tool holder: VDI 30 Number of live tool stations: 12 positions Max. speed of live tooling: 4,500 rpm Itodetqmrrepfx Ah Ajr Drive power of live tool stations: 3.1 kW Max. torque: 10 Nm X-axis travel: 250 mm Z-axis travel: 635 mm Tailstock travel: 580 mm Tailstock taper: MT 4 Quill diameter: 120 mm Quill stroke: 150 mm Rapid traverse X: 24 / Z: 30 m/min Total power requirement: 44 kVA Machine weight approx. 5.6 t Space requirement approx. 4.5 x 2.0 x 2.0 m CNC turning and milling center Gildemeister - CTX 410 V3 - live tooling stations - approx. 7,900 spindle hours

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Spindle speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 35 / 45 kW Maximum torque: 770 Nm Spindle head: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec Y axis: 120 (+/- 60) mm X axis: 300 mm Z axis: 1,300 mm Y axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MT 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Iodpfx Ajvzhiweh Astr Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tooling - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine