Gildemeister Gmx 400 nakup rabljenega (234)

Stanje: dober (rabljeno), Leto izdelave: 2006, Gildemeister Twin 42, Year of manufacture: 2006, Control: Siemens 840 D, Turning length up to 210 mm, Spindle bore: 56 mm, Main spindle, Counter spindle, 1 x Y axis, 2 x C axis, 2 turrets, 12 positions each / all stations driven, Shaft diameter: 25 mm, Driven tools up to 6,000 rpm, Bar feeder: FMB Turbo 10 - 72, Dedpswcyhtjfx Aflecb Main spindle: collet chuck, Counter spindle: collet chuck,

Stanje: dober (rabljeno), Leto izdelave: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K cycle-controlled lathe with Siemens Sinumerik 810 DL control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Centre distance: 1,500 mm Main spindle: Speed range – main spindle: 8–3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Number of gear stages: 2 Dcjdpjw Iqd Isfx Aflsb Spindle nose: No. 8 DIN 55027 Spindle bore at front bearing: 120 mm Usable bar capacity: 62 mm Spindle taper: ME80 Chuck diameter: 250 mm Tool carrier: Tool system: MultiFIX – C Tailstock: Quill diameter: 80 mm Quill taper: MK 5 Quill stroke: 180 mm Feeds: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total connected load: 28 kVA Machine weight approx.: 3.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 piece coolant system About the machine: We are offering a Gildemeister NEF 520 K lathe with automatic cycle, year 2012, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Gildemeister runs very quietly. This newer generation of lathes is very operator-friendly, and surfaces with a ground finish can be produced. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Dsdpswwv Ifefx Aflscb Max. turning diameter: 340 mm Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: rabljeno, Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, skupna širina: 45.000 mm, skupna dolžina: 19.900 mm, skupna višina: 23.000 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 80 mm, dolžina letve: 600 mm, Gildemeister Sprint 65 Linear CNC stružnica (z drugo glavno gredjo, tremi revolverskimi glavami in Y-osjo) Djdpfexnmxmox Aflecb Premer odprtine vretena: 65 mm Število vrtljajev vretena: 5.000 vrt/min Motor vretena: 25/20 kW Število vrtljajev protivretena: 5.000 vrt/min Pomik X-osi: 165 / 165 / 165 mm Pomik Y-osi: 80 mm Pomik Z-osi: 220 / 150 / 650 mm Pomik W-osi (protivreteno do glavnega vretena): 690 mm Indeksiranje C-osi: 0,0001° Število revolverjev: 3 Število orodij na revolver: 12 (3 x 12) Orodni nosilec: VDI 30 Polnilec palic: LNS Quick Load Servo 65 Za vsa vprašanja v zvezi s strojem ali za dogovor o ogledu nas, prosimo, kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše druge oglase, da pridobite popoln pregled nad našo zalogo.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2011, obratovalne ure: 8.545 h, Funkcionalnost: nefunkcionalno, stružna dolžina: 310 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 190 mm, pomik osi Y: 80 mm, pomik po osi Z: 370 mm, montažni premer: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Dodpfx Afow T Srdslscb Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours (power on): 36,443 h Main spindle operating hours: 8,545 h Interface: yes EQUIPMENT - 3-jaw chuck 160 mm with matching flange - 2 sets of spare jaws - Turret head for 12 tools with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck installed – no hydraulic power chuck - Electrical cabinet with Rittal cooling

Stanje: rabljeno, Leto izdelave: 2003, Turning diameter: 210 mm Turning length: 580 mm Control: Siemens 840 D Center height: 190 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 260 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 10 / 7.5 kW Dedpfx Ajtqmmueflscb Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm C-axis: 0.001° Travel - X: 185 mm Travel - Z: 455 mm Number of tool stations: 12 positions Tool holder: VDI 30 Driven tool stations: 6 positions Tailstock quill travel: 400 mm Max. drawbar force: 4,000 N Rapid traverse X/Z: 20 / 30 m/min Feed force: 4.5 kN Total connected load: 21 kW Machine weight approx.: 3.2 t Space requirements approx.: 8.0 x 2.2 x 2.0 m CNC Turning and Milling Center GILDEMEISTER - CTX 310 V3 - incl. IRCO Breuning bar loader - incl. 2x collet chucks - incl. 2x three-jaw chucks incl. various soft and hard jaws - various VDI30 turning tool holders - various coolant pipes - approx. 20x 173E collets - Adapter sleeve for 185E collets (for bars up to Ø50) - 11x 185E collets

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj ima 12300 vklopnih ur Gildemeister NEF 320 / cikel stružnica, leto izdelave 1999, vodenje Manual Plus, razdalja med konicama 750 mm, premer vrtenja nad ležiščem 320 mm, hitrost vretena do 4.000 vrt/min, 2 prestavi menjalnika, Multifix držalo za orodje, zadnji naslon, 2 luneti, Dodpfx Afsw Rm Tdolscb dodatna oprema,

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe, Siemens Sinumerik 810 DL CNC, Year of Manufacture: 2001, Very Good Original Condition Dsdpfx Aowx Rbpsfljcb Technical Data: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Distance between centers: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min X rapid traverse: 8 m/min Y rapid traverse: 10 m/min Spindle nose: DIN 55027 size 6 Spindle bore: 52 mm Main drive power (100%): 7 kW Speed range: 14–3,550 rpm (2 steps) Quill diameter (tailstock): 70 mm Quill stroke (tailstock): 120 mm Quill taper (tailstock): ISO MK 5 Dimensions: 2,600 x 1,440 x 1,440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: For sale is a Gildemeister NEF 320 K cycle-controlled lathe, year 2001, in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and uniformly. Even at high speeds, the Gildemeister operates very quietly. This newer generation of lathes is highly user-friendly and enables the production of ground-like surface finishes. The machine comes from a training workshop of a large company. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Dodpfx Aeur Hfzjflocb

Stanje: rabljeno, Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, skupna širina: 45.000 mm, skupna dolžina: 19.900 mm, skupna višina: 23.000 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 80 mm, dolžina letve: 600 mm, Gildemeister Sprint 65 Linear CNC stružnica (z drugo glavno gredjo, tremi revolverskimi glavami in Y-osjo) Premer odprtine vretena: 65 mm Število vrtljajev vretena: 5.000 vrt/min Motor vretena: 25/20 kW Dodpfx Afjxnmvfjlscb Število vrtljajev protivretena: 5.000 vrt/min Pomik X-osi: 165 / 165 / 165 mm Pomik Y-osi: 80 mm Pomik Z-osi: 220 / 150 / 650 mm Pomik W-osi (protivreteno do glavnega vretena): 690 mm Indeksiranje C-osi: 0,0001° Število revolverjev: 3 Število orodij na revolver: 12 (3 x 12) Orodni nosilec: VDI 30 Polnilec palic: LNS Quick Load Servo 65 Za vsa vprašanja v zvezi s strojem ali za dogovor o ogledu nas, prosimo, kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše druge oglase, da pridobite popoln pregled nad našo zalogo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, obratovalne ure: 26.000 h, potovalna razdalja osi X: 725 mm, pomik osi Y: 50 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 11 W, hitrost vretena (min.): 5.000 obr/min, skupna dolžina: 3.171 mm, skupna višina: 2.648 mm, skupna širina: 4.254 mm, skupna masa: 6.000 kg, CNC Control: SIEMENS SINUMERIK 840D-ERGOLINE Capabilities Travel X-axis mm: 725 Travel Y-axis mm: ± 50 Travel Z-axis mm: 300 Turning length mm: 160 Max. turning diameter mm: ø 250 Swing over bed mm: ø 320 Tool Magazine Number of tool stations: 16 Tool holder: VDI-30 Max. tool length mm: 390 Max. tool diameter mm: 140 Lower turret Number of tool stations: 12 Max. speed for driven tools rpm: 4,000 Driven tool power kW: 11.7 Milling function: Yes Main spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11.7 (40% duty cycle) Max. torque Nm: 280 / 360 (100% / 40% duty cycle) Cooling system Tank capacity liters: 980 L High-pressure cooling bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Blow air/coolant switch Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Machine operating time: Power-on hours: 38,000 Cutting time: 26,000 Base machine: Dimensions/Weight Length mm: 3,171 Dodpfxsxf Hlbo Aflocb Width mm: 4,254 Height mm: 2,648 Weight kg: 6,000

Stanje: rabljeno, Leto izdelave: 2013, Maximum turning diameter: 20 mm Maximum turning length: 80 mm Control: Fanuc 310is Main spindle: - Maximum usable bar diameter: 20 (25) mm - Internal draw tube diameter: 28.5 mm - Max. spindle speed: 10,000 rpm - Drive power – main spindle: 3.7 kW - Max. torque: 9.4 Nm - C-axis C1: 360° Counter spindle: - Internal draw tube diameter: 28.5 mm - Max. spindle speed: 10,000 rpm - Drive power – counter spindle: 3.7 kW - Max. torque: 9.4 Nm - C-axis C2: 360° Travel distances: - X-axis 1: 50 mm / 2: 240 mm - Y-axis 1: 350 mm / 2: 120 mm - Z-axis 1: 80 mm / 2: 300 mm Tool carrier slide 1: - Number of tool positions: 17 - Internal machining: 6 - External machining: 6 - Driven stations: 5 - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet chuck diameter ESX/ER: 16 - Driven tool speed: 3x 3,450 / 2x 6,000 rpm - Power – driven tooling stations: 5x 0.98 kW - Max. torque: 3x 4 / 2x 2.3 Nm Tool carrier slide 2: - Number of tool positions: 13 - Internal machining: 4 - External machining: 4 - Driven stations: 5 - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet chuck diameter ESX/ER: 16 - Driven tool speed: 3x 3,450 / 2x 6,000 rpm - Power – driven tooling stations: 5x 0.98 kW Dodpfx Afstqmnnelecb - Max. torque: 3x 4 / 2x 2.3 Nm Feed: - Rapid traverse (X / Y / Z): max. 40 m/min - Max. feed force: 2.5 kN - Max. acceleration: 5 m/s² Total power requirement: 56 kVA Machine weight: approx. 4.8 t Space requirement: approx. 8.0 x 2.5 x 2.0 m CNC turning center GILDEMEISTER Sprint 20-8 - 8 axes (2x X / 2x Y / 2x Z / 2x C) - Main and counter spindle - Bar feeder magazine FMB turbo 3-36/3200A - Coolant system DELTATHERM

Stanje: dober (rabljeno), Leto izdelave: 1999, Gildemeister MF Twin 65, letnik 1999, upravljanje Siemens 840 D, pomik X/Z 190/555 mm, 1 Y-os +/- 40 mm, 2 revolverski glavi po 12 postaj, gnana orodja, vpenjalni sistem VDI 30, C-os, največja vrtljajska hitrost vretena do 6.000 obr/min, maksimalni prehod palice do 65 mm, podajalnik palic je priložen, ni pa več montiran na stroju. Dedpfsw Swcxsx Aflscb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, STRUŽNICA GILDEMEISTER GS20 VARIANTA 25 MM Električno in mehansko obnovljena - Pnevmatska vpenjalna glava za končno obdelavo obnovljena - Nova skupina za pripravo zraka in elektromagnetni ventili - Radialni in aksialni vozički na poz. 1-2-4-5 - Primem kos na poziciji 6 MEHANSKA REVIZIJA: 1. Revizija bobna 2. Revizija vozičkov 3. Revizija čelnih delov in ročic 4. Revizija vreten 5. Revizija odpiranja/zapiranja vpenjalne glave 6. Revizija navojnega sklopa ELEKTRIČNA REVIZIJA: 1. Nov PLC Siemens S71200 in panel Siemens KTP700 Dcsdjw Sxptepfx Afljb 2. Cam encoder 3. Zamenjava relejev

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 260 mm, premer struženja: 200 mm, izvrtina vretena: 68 mm, skupna masa: 3.200 kg, TECHNICAL DETAILS Turning diameter: 200 mm Turning diameter over cross slide: 260 mm Spindle bore: 68 mm Control: Siemens with ShopTurn Dcodowbu E Dopfx Aflsb MACHINE DETAILS Total weight: 3,200 kg EQUIPMENT - Driven tools (2 axial, 2 radial) - Schunk 201 chuck - Collet chuck including various collets - Various turning tool holders

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 44.078 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8089000198B, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, prehod palice: 60 mm, model krmilnika: Fanuc 31i MSL 42-7 60-742-7, največja hitrost protivretena: 5.000 obr/min, Turning machine with comprehensive equipment! TECHNICAL DETAILS Main Spindle Spindle speed: 5,000 rpm Spindle bore: 65 mm Bar capacity: 60 mm Sub-Spindle Spindle speed: 5,000 rpm Maximum turning diameter: 42 mm Axes Travels Traverse path X1 / X2 / X3: 60 mm Traverse path X4: 130 mm Traverse path Z2: 80 mm Traverse path Z3: 80 mm Traverse path Z4: 340 mm MACHINE DETAILS Total weight: 3,500 kg Control: Fanuc 31i MSL 42-7 60-742-7 Spindle hours: 44,078 h Dedpfsw Nqa Ejx Aflecb Operating hours: 64,405 h EQUIPMENT Chip conveyor with hinge belt Bar feeder preparation Electrical and software preparation Radially driven tools Powered drilling and milling attachments 4-position base holder, slide 3 Drilling and milling unit Axially driven tools Double tool holder Collet ER 11 Tool holder 20x20 mm, slide Drill holder for turret Tool holder for rear machining and slide for backworking Tool holder 20x20 for backworking Drill holder diameter 32 mm Collet chuck holder for main spindle Collet chuck holder for sub-spindle Collet chuck ROEHM KFD HS 112-3 Tool wear monitoring software for Fanuc C-axis main spindle

Stanje: rabljeno, Leto izdelave: 2004, Maximum turning diameter: 560 mm Turning length: 600 mm Control: Siemens 840D powerline Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Centre distance: 620 mm Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 25 / 37 kW Max. torque: 390 Nm Spindle nose: 170H5 Spindle bearing diameter: 120 mm Djdpfxewmf Tps Aflscb Usable bar diameter: 65 mm Max. chuck diameter: 250 mm C-axis: 0.025° / 360° Counter-spindle speed range: 20 - 7,000 rpm Counter-spindle drive power: 25 / 33 kW Max. torque (counter-spindle): 213 Nm Counter-spindle bearing diameter: 90 mm Spindle bore: 57 mm Counter-spindle nose: 140H5 C-axis (counter-spindle): 0.025° / 360° Number of tool positions: 12 Number of driven tool stations: 12 Speed range - driven tools: max. 4,500 rpm Drive power - driven tools: 12.2 kW Tool holder: VDI 40 DIN 69880 Tool shank: 40 mm X-axis travel: 185 mm Y-axis travel: 80 mm Z-axis travel: 620 mm Rapid traverse X: 60 m/min Rapid traverse Y: 15 m/min Rapid traverse Z: 45 m/min Total power requirement: 50 kVA Machine weight: approx. 7 t Space requirements: approx. 6.0 x 3.0 x 2.5 m CNC turning and milling centre GILDEMEISTER - CTX 420 linear V6 - Main and counter spindle - Driven tools - C-axis / Y-axis - Partial hollow clamping device - ShopTurn interface - incl. 2x driven tools - incl. 4x double tool holders - incl. 4x tool holders - incl. 83x tools

Stanje: rabljeno, GILDEMEISTER GM35 AC MULTI-SPINDLE LATHE WITH PIETRO CUCCHI BAR LOADER We can offer the lathe and bar loader fully refurbished as new, complete with CE certificate. Dedpfxjwrpb Io Aflocb

Stanje: rabljeno, Leto izdelave: 2009, Turning length 600 mm Max. turning diameter 320 mm Swing diameter over bed 365 mm Control system: CNC Pilot 4290 Heidenhain Spindle speed range - main spindle: max. 5,000 rpm Drive power - main spindle: 28 / 21 kW Max. torque: 320 / 240 Nm Spindle nose: 170h5 Chuck diameter: 215 mm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar diameter: 65 mm Number of tool positions: 12 positions Tool holder: VDI 30 Number of live tool stations: 12 positions Max. speed of live tooling: 4,500 rpm Drive power of live tool stations: 3.1 kW Max. torque: 10 Nm X-axis travel: 250 mm Z-axis travel: 635 mm Tailstock travel: 580 mm Tailstock taper: MT 4 Quill diameter: 120 mm Quill stroke: 150 mm Rapid traverse X: 24 / Z: 30 m/min Total power requirement: 44 kVA Machine weight approx. 5.6 t Space requirement approx. 4.5 x 2.0 x 2.0 m CNC turning and milling center Gildemeister - CTX 410 V3 Dedjtqmrrjpfx Aflocb - live tooling stations - approx. 7,900 spindle hours

Stanje: skoraj kot novo (rabljeno), Lathe fully overhauled both electrically and mechanically, as new, including repainting. Dcjdpfx Aowit Eljflob

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Spindle speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 35 / 45 kW Maximum torque: 770 Nm Dcsdpsvzhiwjfx Afljb Spindle head: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec Y axis: 120 (+/- 60) mm X axis: 300 mm Z axis: 1,300 mm Y axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MT 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tooling - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Stanje: novo, Leto izdelave: 2024, Gildemeister 42ACF: this is a multi-spindle automatic lathe, designed to meet the requirements of high efficiency production. This model stands out for its versatility, being capable of machining parts up to 42 mm in diameter with the same ease and precision. The 42ACF lathe offers a range of features that make it particularly easy to use. These include intuitive programming via the SIEMENS operator panel, allowing for easy setting and modification of spindle speed, cycle time, and threading speed. Dedpfjrpniqsx Afljcb Technical data: ● Number of spindles: 6 ● Maximum bar diameter: 42 mm ● Hexagonal key: 36 mm ● Cross slides: 4 (positions 1-2-4-5) ● Maximum feed length: 130 mm ● Main spindle speed: 400–4000 rpm (without threading) ● Indexing time: 1–1.5 s ● Cycle time: 2–90 s ● Power: 22 kW The Gildemeister 42ACF, on the other hand, is a multi-spindle lathe aimed at highly specialized industrial sectors, where precision and accuracy are essential.

Stanje: novo, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 mm - Bar passage enlargement on request: 25 mm - Cross slides: 4 (positions 1-2-4-5) - Maximum feed length: 100 mm - Main spindle speed: 400 – 4,000 rpm with threading, 400 – 5,000 rpm without threading - Indexing time: 0.7 s - Cycle time: 1.4 – 60 s - Power: 11 kW ELECTRICAL SETUP FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT Consisting of AC motors (IP 54 protection), main and feed drive with a Siemens S7-1500 programmable PLC DOCUMENTATION: CE Certification with manuals Electrical diagrams Dedpeq Nzl Tjfx Afljcb 1 Hard copy + 1 Copy on USB with PDF files CE Directive 2006/42/EC - 2014/30/EU 2014/68/EU STANDARD

Stanje: novo, Leto izdelave: 2024, The Gildemeister 20ACN allows, via the SIEMENS operator panel, easy setting and modification of spindle speed, cycle time, and threading speed. It is capable of handling workpieces up to 25 mm in size with equal ease and precision. It offers the option to equip CNC slides. Position 6 consists of: CNC cut-off slide and CNC back-finishing slide, variable-speed CNC back-finishing spindle, with synchronization and stop. The specifically programmed CNC back-finishing spindle can also be configured as a C-axis. Technical data: • Max. bar diameter, round: 20 / 25 mm • Max. bar diameter, square: 17 mm Dcedpfxeuqh Ihj Afleb • Bar pusher: 100 / 125 mm • Front spindle stroke: 86 mm • Longitudinal guide block stroke: 50 mm • Radial slide stroke: 42 mm / CNC 50 mm • Axial slide stroke: 50 mm / CNC 56 mm • CNC cutting stroke: 42 mm • CNC back-finishing slide stroke: 42 mm • CNC back-finishing spindle stroke: 100 mm • Continuous spindle speed: 420 – 5,000 rpm • Rapid traverse time: 0.5 – 0.7 s • Main drive power: 11 kW / CNC 15 kW • Installation footprint without bar guide: 4,000 x 1,900 mm • Net weight: 5,500 kg The Gildemeister 20AC, on the other hand, is a multi-spindle lathe targeted at highly specialized industrial sectors where precision and accuracy are essential.

Stanje: novo, Lathe fully overhauled both electrically and mechanically, as new, with repainting Replacement of the electrical cabinet with Siemens Series 1500 PLC Pendant control panel Replacement of cables and micro-switches Overhauled main motor Replacement of loss lubrication oil pump Replacement of tool cooling pump Door interlock checked with electromechanical system Pneumatic unit Loader interface Dcodpfx Afjd Hza Islsb Bar-end position 1 Replacement of all bearings Overhaul of slides Camshafts replaced Replacement of all lubrication distributors Replacement of working and threading clutches Pneumatic secondary chuck Fixed and rotating front chucks 20 mm diameter variant CE certification with supporting documentation