Gb Ganz nakup rabljenega (4.692)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, AL-KO clean air dust extractor Exhibition unit Offered at a special price Technical Data Power Unit 250 P Suction connection: 250 mm Motor nominal output: 6.5 kW / 3-phase Isdpfocdr Enjx Ah Doih Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Small panel saw with tilting saw blade and high-quality anodised aluminium sliding table Cutting level of the small panel saw is directly at the rolling table Precision-guided format sliding table made from aluminium, anodised as standard Large support table on telescopic arm, longitudinally adjustable Standard table extension and table widening enable easy handling of larger workpieces The large saw unit, made from cast iron, is double-mounted to the cast table, ensuring stability, precision, smooth running, and a long service life Large working table made of ground cast iron, extremely robust and insensitive to wear Smooth operation and precise cuts Aluminium sliding table Proven ball-contact system, in use millions of times Dust and dirt resistant due to minimal contact area between ball and trapezoidal rail 10-year HOLZKRAFT warranty against wear on the hardened guideways Telescopic fence Extendable aluminium telescopic fence Adjustable angle With two professional folding stops Parallel fence Standard with fine adjustment and quick clamping system Scope of delivery: - Table extension - Table widening - Anodised aluminium format sliding table - Parallel fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Crosscut length 1660 mm Max. cutting height 90° with scorer 100 mm Max. cutting height 45° with scorer 79 mm Max. rip width left of saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Max. saw blade diameter with scorer 315 mm Max. saw blade diameter without scorer 315 mm Scoring saw blade diameter (option) 80 mm Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Iodecnxamopfx Ah Djih Extraction port diameter saw blade guard 60 mm Weight 295 kg Location: Available immediately ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations Iiedpfx Ahsfig Rws Dsh 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, Versatile and Powerful Ideal for pumping out pond systems, draining basements (e.g., during floods), and irrigating garden beds. Effectively removes water contaminated with sand, cleaning agents, or oil—perfect for wastewater, sludge, and more. Approx. 2.5 hours runtime per tank at 75% load. Robust, durable, and reliable. Operates in all weather conditions. Cast iron volute and impeller ensure maximum durability and a long service life, even when handling sand-laden water. Powerful and efficient 4-stroke engine, easy to start under any condition. Rugged steel frame with vibration dampers. Integrated check valve prevents backflow of water. User-friendly operation. Quick and easy commissioning thanks to direct vacuum generation and simple hose connection at the pump. Convenient maintenance. Dimensions and Weights Length approx.: 560 mm Width/Depth approx.: 430 mm Height approx.: 465 mm Weight approx.: 36 kg Drive Engine power: 4.5 kW Fuel: Petrol Pump Application area: Dirty water Maximum delivery head: 26 m Flow rate: 966 l/min Inlet/Outlet diameter: 76.2 mm Suction height: 7 m Maximum particle size: 27 mm Ijdpfx Ahjhkz Huj Djih Scope of Delivery: 2x hose couplings 2x union nuts 2x rubber gaskets 3x hose clamps 1x suction strainer 1x hose coupling for suction strainer 4x rubber feet 1x set of assembly tools Location: Stocked at 54634 Bitburg - Immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2024, Description The universal models with V-belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used wherever high air quality, durability, and efficiency are essential. Long service life thanks to 2-stage high-performance units with low rotational speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimal cooling via a large fan wheel, motor with overload protection, easy condensate drainage via a standard-installed 1/2" ball valve, standard equipped with Condor pressure switch and manometer, supplied on a safety base pallet with vibration dampers as standard, and tank manufactured according to German AD 2000 regulations. Iijdpfx Ahohk Dd Uo Deh Further information: "GEWEMA Stationary Piston Compressor Type GEKOMP BK119-270-10V" Technical data Intake capacity: 650 l/min Filling capacity: 520 l/min Max. pressure: 10 bar Tank volume: 270 l Technical data for "GEWEMA Stationary Piston Compressor Type GEKOMP BK119-270-10V" Max. pressure: 10 bar Intake capacity: 650 l/min Filling capacity: 520 l/min Motor power: 4 kW/400 V Cylinders/Stages: 2/2 Speed: 920 min-1 Tank volume: 270 l Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Technical Data: Suction capacity: 510 l/min. Filling capacity: 400 l/min. Max. pressure: 10 bar Tank volume: 90 l Cylinders/Stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: The universal compressor with V-belt drive and high-quality features – especially suitable for craftsmen. Designed for use where compressed air quality, durability, and efficiency are essential. Long service life thanks to high-performance units with low speed. Safe transport and excellent stability due to large wheels with parking brake. Optimal cooling provided by a large fan wheel. Aftercooler with cooling fins ensures low entry temperature into the tank, resulting in reduced moisture in the compressed air. Improved efficiency thanks to optimized units. Standard equipment includes: Iiedpfx Aehk Dfkoh Deh Condor pressure switch Pressure gauge Pressure regulator with water separator and Rectus quick coupling Motor with overload protection Location: In stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available - Iisdpfx Ahohp Rdlo Dsh

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 Isdpshqadcjfx Ah Deih For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional use. Article number 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller for constant and uniform material feed, enabling chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for efficient planing of precious hardwoods Models equipped with TERSA cutterblock for rapid, tool-free knife changes and especially quiet operation Material feed with two selectable speeds Extra-long surfacing tables provide easy and precise workpiece alignment Work tables made of grey cast iron, annealed and stress-relieved, making them resistant to deformation and permanently flat Simultaneously rear-opening surfacing tables for minimal setup times Thicknessing table adjustment via handwheel with numeric thickness display High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/grey cast iron construction Quality – Made in Italy TECHNICAL DATA Dimensions & Weights Length (product) approx. 2200mm Net weight approx. 450kg Width/depth (product) approx. 1160mm Surfacing Total table length 2200mm Fence length 1200mm Working height 905mm Fence height 150mm Max. stock removal, surfacing 5mm Chip extraction connection Suction port diameter, thicknessing: 1 x 120mm Thicknessing Thickness table length 775mm Max. working height thickness 240mm Table width 410mm Max. stock removal, thicknessing 5mm Min. working height thickness 3mm Isdpfxolht Hts Ah Djih Electrical Data Main drive motor power 5kW Mains frequency 50Hz Connection voltage 400V Cutterblock Cutterblock type: TERSA Cutterblock speed 5000rpm Cutterblock diameter 95mm Max. planing width 410mm Number of knives 4 Feed Feed speed 6 / 12m/min SCOPE OF DELIVERY Planing jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Isdelht H Espfx Ah Djih Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Solid German engineering Table milling machine with a fixed, single-sided tilting spindle for a tilting range from -5° to +45.5° Positioning control for height and tilt adjustment with zero set for height and incremental travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Left- and right-hand rotation Quick-release cutter clamping system Finely planed cast iron table with rigid frame support Control panel mounted at the bottom on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum split plates Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, fixed/non-interchangeable Iiodpfxjr Ig H Ts Ah Dsh CE compliant GS tested Table size: 1100 x 760 mm Table height: 870 mm Milling spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light grey and RAL 5000 Violet blue Net weight: approx. 800 kg Features: Control panel on top Tilting ±45° Motor 7.5 kW Centrex Extendable frame support Location: in stock, 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. Ijdou I R Utspfx Ah Deih This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Iisdpobuldyefx Ah Djh Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The compelling advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to a diagonal, low-turbulence airflow. Large collection window with airflow baffles – making it suitable for larger workpieces as well. Overspray separation efficiency up to 99%, prefilter retention capacity up to 18 kg/m² – resulting in long filter service life! Simple and fast front-side filter replacement. Affordable replacement filters. Iiodjdqc U Hopfx Ah Doh Low acquisition costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as prefilter, and fiberglass filter as secondary filter unit. Ex-proof fan with throttle valve mounted on the left. Do not compromise on surface quality. Easy Paint extraction walls are the ideal, economical solution for the effective collection and filtration of overspray as well as extraction of solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system uses two stages to achieve a maximum separation rate of up to 99%. Owing to the pleated filter pockets, the cardboard labyrinth filter initially captures significantly more overspray (up to 18 kg/m² filter area) compared to conventional filter mats. The downstream fiberglass secondary filter only retains the finest residual particles. As a guideline, depending on the lacquer used, the cardboard labyrinth filter can last approximately 150 to 200 painting hours. The fiberglass filter only needs to be replaced after around 900 to 1200 painting hours, i.e., at every 5th or 6th cardboard filter change. Additionally, Easy Paint features a lower intake opening to safely and quickly capture solvent vapors at floor level or from floor pits. Thanks to this additional lower intake opening, the Easy Paint can be connected to a floor pit or sump as an underfloor extraction system. The front-mounted filter cassette also simplifies filter changes in this application. Standard extraction performance Easy Paint 7000 Article No. 600027 Airflow rate as supplied * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400 V/50 Hz 2.5 kW ex 2-pole Extraction pipe connection D = 355 mm Width in mm 2845 Total height in mm 1955 Depth in mm with collection window 1015 Weight in kg 180 Location: Ex-stock Bitburg Display machine at a special price

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale Iiedpfodqzh Tsx Ah Dsh TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, - NEW - Make: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: - Fully automatic electronic control with program selector switch for RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibrating feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) Iodpfxjdwi Rko Ah Dsih - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for residual glue level display in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for rinsing/cleaning - 4 castors for moving the machine Including 1 pistol for dowels Ø 8 mm, dowel length 25 - 40 mm, driving projection 7 - 20 mm Air connection: 6 bar Price from €11,750 ex stock 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Edging length: 2,600 mm Max. saw blade diameter: 315 mm Ijdpfx Ahjd Dtc To Doih Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Saw blade tilt: 90° - 45° - Planer - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, A thoroughly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes, or an ideal complement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter surface area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional: type-tested rotary valve (FSA) • Tested return flow damper • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Inlet diameter: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection container volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: Available from stock, 54634 Bitburg - Immediately available – in stock Subject to prior sale Iisdpfohkzt Nox Ah Doh

Stanje: novo, Leto izdelave: 2025, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction particularly with bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and economical material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Isdpfx Aoh Eiw Ioh Deih Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting inserts Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration mounts - V-rotor (patented) with milled knife holders in profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available from stock in 54634 Bitburg - Immediately available - Request more information

Stanje: novo, Leto izdelave: 2025, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction of bulky materials in the process. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or manually. This hopper can be tailored to individual requirements and guarantees continuous and cost-effective material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Iiodpfx Aheh Hnp Ds Deh Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber anti-vibration mounts - V-rotor (patented) with profile-milled knife pockets - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available - Isdpolht H Nofx Ah Doih

Stanje: novo, Leto izdelave: 2025, Weima Shredder / Single-Shaft Shredder WL 8 Iisdpfjmhh Idex Ah Doh The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high production numbers of this highly sought-after shredder guarantee reliable, tried-and-tested technology at the best price-performance ratio. The machines are distinguished by their very robust construction, ensuring extremely high durability—even for outdoor use. Intuitive operation thanks to Siemens PLC control with touch display To ensure the electronics are perfectly matched to the machine, we design, build, and wire our control cabinets in-house. We exclusively use high-quality components, such as those from Siemens or Rittal. Intuitive touch interfaces guarantee fast adjustments. Functions such as setting the ram cycle or stop ensure high throughput. The integrated overload protection also prevents machine damage. No material blockages thanks to self-cleaning hopper design The hopper serves several purposes. Material to be shredded is loaded through it—either manually, with machinery, or via conveyor belt. The large opening also makes loading very large parts easy and convenient. Crucial for the shredding process is its special design, rounded at the front to effectively prevent material bridging. Even with bulky pieces, the shredder can self-feed and prevent jams. If required, hopper extensions and lids with gas struts are available. Durable rotor bearings thanks to isolated design A rotor bearing must be exceptionally robust due to the extreme stress during shredding operations. To prevent dust or foreign material from entering the bearing, we have separated it from the machine frame. This also makes it very easy to maintain and accessible. Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 - 125 - Motor power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): - Extraction port (mm): 200 - Infeed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second row of knives - Logspacer Location: Arriving at warehouse 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Ijdpspgkmwofx Ah Doih Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Iijdpfxepq If Ds Ah Djh Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structuring unit Robust 3-wide belt sander for the highest demands Consistent working height thanks to upper section adjustment Working width: 1350 mm Pass-through height max.: 205 mm (up to 18.5 kW main drive motor) Abrasive belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Abrasive belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" – Contact Roller - Grooved rubber contact roller, hardness 80 Shore - Contact roller height continuously adjustable via touch screen - Motorized lifting/lowering of the contact roller depending on aggregate selection - Increased belt speed Unit "Ed-L" – Diagonal Pad - Electronic sanding pad with 22 mm segment width (special pivoting version), with variable edge pressure, automatic pressure regulation, and segment memory - Continuously adjustable belt speed (PLC-stored) - Additional sanding pad insert Unit "Xi-L" – Cross Sanding Unit Integrated in Machine Body - Electronic sanding pad with 22 mm segment width, variable edge pressure, automatic pressure regulation, and memory for sanding pad segments - Cross sanding belt supported by lamella belt - Continuously adjustable belt speed (PLC-stored) Perfect-3 1350-REdXi-LL Main motors: - 1st unit: 18.5 kW (25 HP) - 2nd unit: 11 kW (15 HP) - 3rd unit: 16 kW (MPM) (22 HP) 400 V / 50 Hz Workpiece feed: - Fabric-reinforced rubber conveyor belt - Rubberized conveyor drive roller - Motor: 2.2 kW (3 HP) / 400 V / 50 Hz - Speed: infinitely variable 3 - 15 m/min Vacuum system: - On feed table - Additional perforation of conveyor belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V / 50 Hz Abrasive belt cleaning: - Air knife for cleaning the abrasive belt in "Ed-L" and "Xi-L" units, cycle-controlled, with extraction channels, driven by blower 1.1 kW (1.5 HP) 400 V / 50 Hz Pressure elements: - Infeed: parallel spring-mounted, ground steel pressure roller ⌀ 50 mm - Between units: rubberized pressure roller ⌀ 50 mm - Outfeed: rubberized pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 Shore 2. Diagonal sanding pad with paint configuration and air knife for belt cleaning 3. Cross sanding unit with paint configuration and air knife for belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring unit at outfeed B 10: Abralon structuring brush, Mink W71: Additional quick-change shaft for 1350 mm brush B 12: Brass-coated steel wire brush 1350 mm C 10: LED package Iedpfx Aor Hr Dzeh Djih A 20: 5 x motorized adjustment dampers (2x D=180 + 3x D=150 mm) Working width: 1350 mm Max. workpiece height: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10” touch screen with Industry 4.0 control Location: Ex stock 54634 Bitburg - Immediately available -