Free Tig nakup rabljenega (17.669)

Leto izdelave: 2022, obratovalne ure: 1 h, Stanje: novo, New ALMIG LENTO 15 LK oil-free, speed-controlled screw compressor (air-cooled) Equipment: - AIR CONTROL HE control system - GLW load/idling operation Technical Data Type: LENTO 15LK Adjustable system operating pressure (infinitely variable): 5 to 10 bar Bdedpfxsdtm Nde Afqsk FAD at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.03 / 2.64 m³/min at 6 bar min/max: 1.00 / 2.42 m³/min at 7 bar min/max: 0.97 / 2.20 m³/min at 8 bar min/max: 0.93 / 2.03 m³/min at 9 bar min/max: 0.90 / 1.82 m³/min at 10 bar min/max: 0.87 / 1.63 m³/min Drive motor rated power: 15 kW Drive motor protection class/insulation class: IE3 Fan motor rated power: 0.2 kW Fan motor protection class/insulation class: IP54 / H Operating voltage / frequency: 400 V / 50 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13), sound-insulated, at 50% load: 66 dB(A) 100% load: 68 dB(A) Dimensions: Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 890 kg Compressed air connection: G 1" Oil-free screw compressors of the LENTO series ensure maximum efficiency in compressed air treatment due to precise matching of compressed air output to demand, low discharge temperatures, and minimized service and maintenance costs. The requirement for high-quality, 100% oil-free compressed air is not only essential for sectors such as pharmaceuticals, food, electronics, and medical technology, but is also utilized wherever products of the highest quality are produced. This is why ALMiG relies on maximum compressed air quality in sensitive applications with the oil-free compressors of the LENTO series. During the compression process, only water—the most natural of all resources—is used. The result: - Clean, environmentally friendly compressed air without oil; any entrained dust particles are washed out by the water - Clean condensate—pure water—can be discharged directly into the sewage system - Lowest compression temperatures thanks to optimal heat dissipation via water, resulting in minimal energy consumption for compressed air generation

Stanje: rabljeno, TIG Welding Machine MESSER GRIESHEIM Model Combitig GW 23 AC/DC Machine operates only in DC welding mode with contact ignition Serial No.: 445276 Year of manufacture: approx. 1990 Output: 230 Amp. = 35% duty cycle 180 Amp. = 60% duty cycle 140 Amp. = 100% duty cycle Infinitely variable adjustment range Current type: DC Power supply: 400 Volt, 50 Hz, 32 Amp. plug Bdsdpfedzqa Iex Afqok - 2-stroke / 4-stroke welding operation selectable - DC welding with contact ignition functional - AC welding and high-frequency ignition not functional - 7 meter torch hose package with hand torch - Connection socket for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator included Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg Test welds produce good results when welding stainless steel in DC mode; the HF ignition does not function, but arc can be started via brief contact. AC welding of aluminium cannot strike an arc.

Stanje: dober (rabljeno), TIG torch package, welding torch, hand-held welding torch, TIG torch - includes: torch body - Length: 8 m Bdodpfxjd Nv A Es Afqjk - Tuchel connector: 5-pin - Water-cooled - Weight: 3.8 kg

Stanje: dober (rabljeno), Prodajamo Merkle W 300 DC TIG varilni aparat na enosmerni tok TIG območje enosmernega toka: Napetost v prostem teku: 80 V Delovna napetost: 10-22,8 V Varilni tok: 5-320 A HSB 60 % delovni cikel (10 min): 320 A HSB 80 % delovni cikel (10 min): 300 A DB 100 % delovni cikel: 260 A (pri 40°C) Primarna trajna moč: 9,5 kVA Primarni trajni tok: 13,7 A Bdedpfou Sqqisx Afqsk Primarni maksimalni tok: 19 A Teža: 130 kg Mere (D x Š x V): 910 x 600 x 910 mm z nosilcem za plin jeklenko

Leto izdelave: 2023, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 2 nuovi CIMBRIA MODUFLEX F300JYMS/28 ATEX II 20/22 in vendita. Mai installati a causa di modifiche al progetto. Bdodpovwl Rqsfx Afqsk - Progettati per il carico in uscita privo di polveri di materiali sfusi secchi. - Adatti per autocisterne, camion con pianale, vagoni ferroviari aperti e chiusi, e container. - Realizzati per prestazioni gravose, lunga durata e alta capacità. - Disponibili modelli per quasi ogni tipo di prodotto sfuso secco, inclusi prodotti agricoli, materie prime e merci industriali. Disponibili anche separatamente. Per ulteriori foto, contattare.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 240 h, Funkcionalnost: popolnoma funkcionalen, Ciberpan Stress Free Divider – 110 batov (vključno s 50-litra lijakom) - Kupljen januarja 2024, malo rabljen ~6 mesecev - Stanje: odlično; odtlej skladiščen - Deluje s testom z 50–90% hidracije (odlično za čabato, focaccio, pico) - Zmogljivost: do 1.200 kosov/uro - Zaslon na dotik s spominom za 40 programov Bdjdpfxjxg Nu Uj Afqok - Lijak iz nerjavečega jekla s teflonskim premazom (50 l) - Minimalni oljni sistem, posipalec moke, elektronski nadzor bata Nova cena: 20.000 € Cena: 12.000 € (možna pogajanja)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, številka stroja/vozila: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of manufacture: 2025 Operating hours: 1 h The compressor is in stock and immediately available Pressure: 8 bar Rated power: 7.50 kW Free air delivery: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 835 x 595 x 935 mm Weight: 195 kg Visit our showroom. Bjdpfx Afjv Al Nqjqsdk We always have a wide selection of new and used compressors in stock! Immediate availability.

Stanje: rabljeno, TIG Welding Machine L-TEC Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 A = 60% duty cycle 155 A = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Power connection: 400 Volt, 50 Hz, 32 Amp. plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - DC only - HF ignition Required space (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Bdedpfedzqb Eex Afqok Otherwise, in good condition.

Stanje: pripravljen za uporabo (rabljen), Merkle W 420 AC/DC TIG Insquare welding machine / welding unit For technical specifications, please refer to image no. 2. You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued. Requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Bsdpfxju Hg Aqe Afqjdk Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Stanje: dober (rabljeno), Prodajamo WIG varilni aparat ESS TIGARC 300 Bdsdpsu Sr Upjfx Afqsk

Stanje: pripravljen za uporabo (rabljen), Na voljo je skupaj 10 naprav za deionizacijo Keyence. Generacija ionov: +/-7000V, ionsko ravnovesje: +/-30V, največje delovno območje: cca 3000mm, razpon delovne razdalje: 50mm-2000mm, material elektrod: volfram, uporaba: plastika/folije/premazi/elektronika/embalaža. Dokumentacija je na voljo. Ogled na lokaciji je možen. Bdsdpfxjw R U Ags Afqjk

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina ozemljitvenega kabla: 3.000 mm, trajanje garancije: 3 meseci, dolžina paketa cevi: 8.000 mm, varilni tok pri 60% delovnega cikla: 205 A, varilni tok pri 100% delovnem ciklu: 170 A, vrsta zaščite (IP koda): IP23, varilni tok (min.): 3 A, varilni tok (maks.): 230 A, For sale: EWM Tetrix 230 DC Comfort 5P 3-230 AMP 230 Volt Gas-cooled 2/4-stroke Pulse Bodpfxsw N Iuye Afqodk Pre-gas Post-gas Current ramp-up Current ramp-down Start current End current Electrode option Suitable for welding steel and stainless steel Overhauled, tested, and serviced. Includes 8-meter welding torch, ground cable, gas hose, and 3-month warranty. Test welding is possible. A video of the machine in welding operation is available. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside of Europe, using Euro pallets for transport. All our machines have been serviced and are 100% ready for use, unless otherwise stated. The pictures above show the actual machine. We can also offer you other types of machines, including: Used, new, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6214330001, skupna masa: 89 kg, skupna višina: 950 mm, moč: 2,2 kW (2,99 KM), tlak (maks.): 8 letvica, raven hrupa: 60 dB, Immediately Available: New oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with integrated twin-column adsorption dryer with sound-insulated enclosure and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, mounted on a 50 l internally coated tank with integrated adsorption dryer. Bsdpfjvlw Haex Afqodk Ideal for 3 dental treatment units – minimal footprint thanks to compact design. Technical specifications: Type: Dr. SONIC 320-50-W-ES-3M Maximum operating pressure: 8 bar Intake capacity: 320 l/min Effective delivery at 6 bar*: 210 l/min Number of stages: 1 Number of cylinders: 2 Compressor speed: 1,400 rpm Rated motor output: 2.2 kW Motor protection rating / insulation class: IP 54 / F Operating voltage / frequency: 230 V / 50 Hz Sound pressure level (DIN 45635 T13): 60 dB(A) Tank volume: 50 liters Width: 700 mm Depth: 500 mm Height: 980 mm Weight: 89 kg Compressed air connection: G 3/8"

Stanje: rabljeno, TIG welding machine, electric welding unit KESTRA type TIG 350 AC/DC Arc welding machine Serial No.: Year of manufacture: approx. 1985 Power output: 350 amps = 60% duty cycle Adjustment range: 3 steps with fine adjustment Current type: AC / DC Mains connection: 400 V, 50 Hz, 32 A plug - 4 meter hose package with TIG torch - 2-stroke / 4-stroke welding facility - Water-cooled Bodpodzql Ssfx Afqodk - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition is non-functional; the arc can be initiated by briefly touching.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 215 mm, skupna širina: 130 mm, skupna dolžina: 360 mm, skupna masa: 7 kg, trajanje garancije: 12 meseci, vrsta hlajenja: zrak, višina izdelka (maks.): 10 mm, varilni tok pri 60% delovnega cikla: 150 A, varilni tok pri 100% delovnem ciklu: 130 A, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, - Inspected used unit in excellent condition, directly from the manufacturer - - Multiple units available - MicorTIG 200 DC ControlPro (Accu-ready) Bdedpfx Aovxid Refqok TIG-DC welding inverter with MicorBoost technology (incl. gas management, high frequency ignition, and electrode welding function). All-in technology for mains, generator, and battery power - "3 steps and weld" operating concept - Simple single-knob control - Continuously adjustable current - Precise digital ampere display - With graphical user interface on OLED graphic display - Maximum customization thanks to detailed welding cycle control - Job memory for 10 welding tasks Current list price (02/2025): 2,277 € plus VAT Scope of delivery: Unit including detachable mains cable, carrying strap, gas hose, and operating manual THE MicorTIG SERIES. THE POWER PACKS FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional users: The MicorTIG series welding machines from Lorch are the ultimate TIG units for installation work as well as for the workshop – suitable for steel and stainless steel. Whether for production or repair, and whether you have mains power on-site or not: The MicorTIG series improves TIG welding results worldwide – and makes everyday work easier. Quite literally: Weighing only 6.8 kg, you can easily take your Lorch MicorTIG welding unit anywhere – even with accessories in the carry case. Small but powerful: With patented MicorBoost technology, these machines deliver 200 amps from any standard power outlet. INTUITIVE OPERATION. Thanks to the precise digital ampere display and clearly structured control panel, operation is intuitive and highly precise. Optionally available: an operating concept via graphic display. CONTACTLESS HF IGNITION. TIG ignition occurs contactlessly with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, no inclusions are created in the seam and the electrode is preserved. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse functions up to 5 kHz are ideal for working with thin sheet metal. They enable outstanding weld pool control and perfect results, even for demanding welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save parameters for up to 10 welding tasks and quickly retrieve them when needed. Recurring jobs are therefore completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. The MicorTIG machines from Lorch are suitable for every type of electrode and offer convenient pre-selection for CEL and standard electrodes. Even special electrodes are no problem. During welding, arc force regulation ensures arc stability and optimum material transfer. The anti-stick system prevents sticking or annealing of the electrode. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE OUTLET. The patented MicorBoost technology provides substantial voltage reserves and controls the TIG arc extremely stably, safely, and precisely – even with fluctuating mains voltage. This enables you to weld with up to 200 amps on a regular power outlet.

Leto izdelave: 2023, Stanje: novo, Wkrótce dostępna w Polsce. KCTE-1260 — bezkrzywkowa, wieloosiowa maszyna CNC do gięcia i formowania drutu, wyposażona w system komputerowy z Tajwanu oraz serwonapędy i sterowniki Yaskawa z Japonii. Specjalnie zaprojektowana bez ramienia łącznikowego i krzywek, suwakowa baza maszyny jest indywidualnie sterowana przez osiem osi serwo, oś podawania drutu, oś rotacji tulei, oś obrotu drutu oraz spinner. Maszyna opcjonalnie może być wyposażona w elementy, takie jak wolne ramię lub serwonożyce/serwonożyczki gwarantujące zerowe uszkodzenia trzpienia i maszyny. Liczba osi: 12 Zakres średnicy drutu: ᶲ2,0–6,0 mm Maksymalna prędkość podawania drutu: 105 m/min Indeks sprężyny: 4 Serwomotor podający: 7,5 kW Serwomotor tulei: 1,8 kW Serwomotor obrotu drutu: 5,5 kW Serwomotor formujący: 5,5 kW × 8 Serwomotor spinnera: 1,8 kW Bedpfokthx Rox Afqodk Zasilanie: 3P/380 V, 50/60 Hz Wymiary (dł. × szer. × wys.): 3800 × 2000 × 2200 mm Masa: 8000 kg

Stanje: dober (rabljeno), Leto izdelave: 2009, WIG varilni aparat, invertni varilni aparat, WIG varilni aparat, invertni varilni aparat -Proizvajalec: Merkle, WIG varilni aparat z vodnim hlajenjem, s transportnim vozičkom -Tip: TIG 240 DC Bsdpfxjqw D Eis Afqsdk -Varilni tok: maks. 240 A -Hlajenje: Merkle WK 230 vodno krožno hladilno napravo -Dodatki: vklj. ozemljitveni kabel, komplet cevi, glej slike -Dimenzije: 970/560/V1085 mm -Skupna teža: 99 kg

Leto izdelave: 2013, obratovalne ure: 50 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Model #2WN137F1-H23Z-BJMVA-21/50T, Crosshead piston compressor suitable for small-molecule gases such as hydrogen or argon. Oil-free! Installed as a backup unit but never used in production, therefore in like-new condition. Current list price: €190,000 Bodpfsv Uyqmox Afqedk Inlet pressure: 5 psi = 34.5 kPa (0.345 bar g) Discharge pressure: 60 psi = 413 kPa (4.13 bar g) Throughput: 148 scfm = 240 Nm³/h Power requirement: 30 kW

Leto izdelave: 2023, obratovalne ure: 0 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: OFASHL060-40G16AE, Parker Zander adsorption dryer compressed air treatment system – OIL FREE AIR SYSTEM. The OFAS combines advanced OIL-X filtration technology with an optimized drying system to deliver consistently high performance over the long term. The air quality has been independently certified according to ISO 7183 and ISO 8573-1 and, if required, also meets Class 0 requirements for total oil content. With dew point control, adjustable regeneration air volume Exhibition unit: Parker / Zander adsorption system OFASHL060-40G16AE Year: 2019 Technical data: Compressed air connection: BSPT G 1/2" Flow rate: 1.65 m³/min at a pressure dew point of -20°C 1.50 m³/min at a pressure dew point of -40°C Other models and configurations available upon request! Removes contaminants, oil, and water down to 0.003 µm Bodpjd Sninsfx Afqsdk Max. pressure: 16 bar Dimensions: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd's according to ISO 8573-1 Class 0 for total oil content in compressed air from both oil-lubricated and oil-free compressors.

Stanje: rabljeno, TIG welding machine, electric welding unit DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture: approx. 1975 Output: 225 amps = 60% duty cycle 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Current type: Direct and alternating current (AC-DC) Power supply: 380 V, 50 Hz - Power setting via 5 coarse steps and stepless fine setting via rotary potentiometer - 2-stroke and 4-stroke welding modes - Remote control with rotary potentiometer for fine adjustment - Digital amperage display - TIG torch package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition Bdsdpfxedzqace Afqek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, JUN-AIR compressor in soundproof enclosure Model 2000-25M Pressure (max.) 16.0 bar Continuously adjustable Tank volume 25 litres Integrated air dryer Very well maintained Only 204 operating hours in a clean environment. Bjdpfxswpupxj Afqjdk Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel castors with locking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Stanje: rabljeno, Leto izdelave: 1998, Panel Saw Putsch Meniconi SVP 145 Year of manufacture: 1998 - 6.2 kW - Panel size: 4200 mm x 2200 mm - Connection rating: 400 Volt - Cutting depth: 60 mm - Overall dimensions: 5665 x 3170 mm required space - Depth: 1500 mm, free-standing - Saw blade diameter: 250 mm Bsdpfxswv Ud Ne Afqedk Good condition

Leto izdelave: 2009, Stanje: rabljeno, For sale are 8 free-flow centrifugal pumps manufactured by Pumpenfabrik Wangen, model ESP, from the year 2009. Five of the eight pumps are equipped with a motor. Quantity: 5 / 3 with motor Length: 172 cm (without motor) / 229 cm (with motor) Height: 34 cm Manufacturer: Pumpenfabrik Wangen Model: ESP No.: 920607 Year of manufacture: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 RPM: 1400/48 Power: 3 kW/S1 Voltage: 230/400 V Bdodjga Dtcopfx Afqek Current: 11 / 6.30 A

Stanje: novo, Leto izdelave: 2025, Metal detector for inspecting vertically falling products. The product is fed from above through a hopper. Ideal in combination with multihead weighers and vertical packaging machines. Stainless steel frame, touchscreen control panel. - Specifications: Detection accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; Tunnel size: Ø 100mm; Power supply: 220V/0.05kW, 50Hz/60Hz; Dimensions and weight: L50 x W50 x H40cm, 45/145kg. Bdjdsv Nm Eyopfx Afqsk Please note that our new prices are often below the usual rates for used equipment. Feel free to contact us and let us know your packaging application. We usually have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines are supplied with a full warranty.

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Ex-display unit, immediately available: New RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta starter Bjdpfxelnlrzj Afqodk Year of manufacture: 2023 Operating hours: 1 h The compressor is in stock and ready for immediate delivery. Pressure: 10 bar Rated power: 4.50 kW Free air delivery: 405 l/min Sound level: 68 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 760 x 550 x 920 mm Weight: 181 kg Visit our showroom. We always have a wide selection of new and used compressors in stock! Immediately available.