Flex nakup rabljenega (661)

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Price must be confirmed with the manufacturer before ordering! Nksdpfx Ajfk Aicsdvjw

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This enables the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 hole grid. Used in combination with machining equipment, the table allows test or finishing fixtures (deburring, marking, or inspection) to be adapted to the height of the machine's clamping table. The table systems can be relocated easily using a pallet jack. These mobile systems, with their various fastening and safety features, have proven ideal for the maintenance of injection molding and die-casting tools. After removal from the machine, tools can be serviced safely on-site and transported to maintenance for repairs. The fully bolted construction of the clamping plate allows for the cost-effective replacement of the work surface in case of wear. Price must be obtained from the manufacturer prior to ordering!! Nsdpefk Ainofx Advekw For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Nksdpfx Adsfk Aipovew Table width: 1480 mm Table length: 1980 mm Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Nkedpfx Adjfk Ai Ajvsw Table length: 1950 mm Weight approx.: 358 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Dimensions (LxWxH): 2980 x 1480 x 65 to 105 Width: 1480 mm Length: 2980 mm Approximate weight: 840 kg Nsdpfx Ajfk Ah Isdvokw Welding and assembly tables from the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, operating electrically powered tools, or working with chemical and oily substances. Thanks to transport bars integrated into the base, the tables can be easily moved with a pallet jack and their height can be quickly aligned with other working surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows—such as those common when using heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformation or dents. The steel worktop also allows unrestricted use of magnetic clamps for securing components. Due to its substantial dead weight, this universally applicable table offers excellent stability against tipping, even under heavy loads or tools and when set at its maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Nkodpfx Adjfk Aixovew Table width: 950 mm Table length: 1450 mm Approx. weight: 425 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Standard height adjustment is performed manually via a hydraulic system within the 650 – 1050 mm range (other heights available upon request). The worktop also features a Ø 28 mm hole grid with a 100 x 100 mm spacing, just like the SST fix series. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems can be easily relocated on site with a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools due to their various mounting and securing options. After removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg Nedpfx Asfk E Dzedvskw This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Nkodpfxogrvwio Advew Weight approx.: 428 kg This allows the user to flexibly adjust the working surface height to meet the specific requirements, thereby improving productivity and ergonomics. Height adjustment is standardly performed by a manual hydraulic system in the range of 650 – 1050 mm (higher or lower adjustment available upon request). The table systems can be easily moved on site with a pallet truck. These mobile systems have proven ideal, particularly with various fastening and securing options, for maintenance of injection molding and die casting tools. After removal from the machine, tools can be safely serviced on site or transferred to the maintenance department for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The price must be requested from the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Dimensions (LxWxH): 1980 x 1480 x 65 to 105 mm Width: 1480 mm Nkedpfx Adegrz Tdjvow Length: 1980 mm Weight approx.: 575 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for processing heavy workpieces, handling electrically powered tools, or working with chemical and oily substances. Thanks to transport handles on the base, the tables can be easily relocated with a pallet truck and the height can be smoothly adjusted to different working levels. The height adjustment range covers 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts and blows—such as those that commonly occur when using heavy hand tools or handling very heavy metal workpieces or tools—without sustaining lasting deformations or notches. The metal worktop allows unrestricted use of magnetic clamps for securing components. Due to its high dead weight, this universally applicable table provides excellent stability and safety against tipping, even when loaded with heavy objects or tools at the maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 464 kg Nkodpfx Aogrz Tlsdvjw This system allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic mechanism in the range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection molding and die-casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transported for repairs to maintenance. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 490 kg Nkodpfx Adjfk E D Dsvsw This enables the user to flexibly adjust the working surface height according to the specific requirement, improving efficiency and ergonomics. The height adjustment is performed as standard by a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). Like the SST fix series, the tabletop features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, inspection or finishing fixtures (deburring, marking, inspection) can be adapted to the clamping table height of the machine. The table systems are easily moved on site using a pallet truck. These mobile systems have proven ideal, with various mounting and securing options, for the maintenance of injection moulding and die casting tools. Once removed from the machine, the tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. Price must still be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Nsdegrvv Tspfx Advokw Approx. weight: 308 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 mm Table width: 900 mm Table length: 1400 mm Approx. weight: 305 kg Nkedsgrvwbspfx Advjw This allows the user to flexibly adjust the working surface height according to specific requirements to improve efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). The table systems can easily be relocated onsite using a pallet truck. These mobile systems have proven ideal due to their various fastening and securing options for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced onsite and then transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be requested from the manufacturer prior to ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 602 kg This enables the user to flexibly adjust the working surface height to the respective requirements, improving efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 800 mm (other heights available on request). Like the SST fix series, the worktop also features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, test or reworking devices (deburring, marking, inspection) can be adjusted to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely maintained on site immediately after removal from the machine and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, if the work surface wears out over time, it can be replaced cost-effectively. Price must be requested from the manufacturer before ordering!! For accessories and further information, please follow this link: Nodpjgrz Ttefx Advjkw

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Njdpfxsfk E D Ao Advjkw Approx. weight: 475 kg This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic mechanism within a range of 650 – 1050 mm (other heights available on request). The worktop, as with the SST fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with processing machines, inspection or post-processing devices (such as deburring, marking, or testing fixtures) can be adjusted to match the clamping table height of the machine. The table systems can easily be relocated using a pallet truck. These mobile systems, with their various fixing and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and then moved to maintenance for repairs. The fully bolted design of the clamping plate enables cost-effective replacement of the working surface in case of wear at a later date. Price must be confirmed with the manufacturer prior to ordering! For accessories and additional information, please follow this link:

Stanje: novo, Leto izdelave: 2022, Keckex KOMEX M13 FLEX Thermal Weed Removal Device Rental Return at Special Price Flexible and Mobile The KOMEX M13 FLEX is the smallest, yet most versatile thermal weed removal device available. With a wide range of options, you can configure your unit for weed control, chewing gum removal, and gentle cleaning. Modular, autonomous, and effective in all application areas. Optional undercarriages: trolley cart, 3-point hitch, and more. Ideal for cleaning and weed control. Water tank: available without / self-priming pump. Suitable for all carrier vehicles with water tank, trailers with water tank, and vehicles with 3-point hitch and water tank. Basic equipment: - Hot water steam generator 12 Volt, 9l/min, LP1002, analog - Multi-frame 0.9 m galvanized - Battery compartment with cover - Set: AGM 12V, 240Ah battery with 25A charger, 2x SB 50 grey plugs - 15 m HW hose with protective cover and abrasion guard - 2-piece hand lance set, gun with nozzles, cylinder lance and quick coupling - L x W x H: 90 x 70 x 100 cm - Empty weight approx. 240 kg Optional equipment: - Automatic hose reel, stainless steel for 15 m - Holder for machine protection - Machine protection 3kg descaler 3kg - 4-fold straight lance holder, 2.0 - 3-point hitch Cat. 1-2 for multi-frame, Storage location: null Nksdpfx Adjyhtp Tsvjw

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 67.130 h, Rabljeni stroj za polnjenje A3 Flex 100V 1000 Edge 7000 bph Nadgradnja v letu 2024, odlično stanje in garancija na zamenjane rezervne dele Pregled rabljenega stroja za polnjenje A3 Flex Nkodpfx Aewbhdasdvew Rabljeni stroj za polnjenje A3 Flex 100V 1000 Edge 7000 bph zagotavlja napredno aseptično polnjenje za mlečne napitke in sadne sokove. Prvotno je bil ta model A3 FLEX 100V proizveden leta 2006 pri Tetra Pak. Leta 2024 pa ga je podjetje nadgradilo na različico 100V, zaradi česar ustreza sodobnim standardom na področju procesnega nadzora, zmogljivosti in varnosti delovanja. Tako ostaja zelo aktualna in zanesljiva možnost za trenutne potrebe proizvodnje. Pakirni format in tehnična konfiguracija Rabljeni stroj za polnjenje A3 Flex podpira format 1000 ml Edge, to je različica embalaže Tetra Brik z nagnjenim zgornjim robom. Ta zasnova izboljšuje ergonomsko rokovanje in olajša uporabo navojnih zapork. Sistem uporablja en polnilni ventil, skladno s standardno zasnovo strojev serije A3 Flex. Ti stroji izvajajo vertikalni polnilni proces v aseptičnih pogojih. Postavitev zagotavlja sterilne pogoje skozi celoten postopek: oblikovanje, polnjenje in zapiranje. Zmogljivost izhoda in delovne ure Rabljeni stroj za polnjenje A3 Flex 100V 1000 Edge 7000 bph dosega nazivni izhod 7000 embalaž na uro, kar ga umešča med srednje do visoko zmogljive rešitve v segmentu aseptičnega polnjenja brezalkoholnih pijač. Skupaj je zabeleženih 67.130 delovnih ur, kar je ključni podatek za tehnično oceno. Kljub starosti stroja njegova dosledna servisna zgodovina in nadgradnja leta 2024 zagotavljata zanesljivo delovanje tudi v zahtevnih proizvodnih okoljih. Namembnost in higienska zasnova Stroj zelo učinkovito obdeluje mlečne izdelke in sokove ter izpolnjuje vse aseptične zahteve embalaže, vključno s sterilizacijo in hermetičnim zapiranjem. Notranji vodi in polnilni prostor so izdelani iz nerjavečega jekla, kar omogoča učinkovito čiščenje in kompatibilnost s CIP postopki (čiščenje na mestu). Higienska zasnova ustreza aktualnim prehranskim varnostnim standardom v industriji pijač, zato je primeren tudi za občutljive aplikacije. Integracija in nadzorni sistem rabljenega stroja za polnjenje A3 Flex Stroj A3 Flex se odlikuje po kompaktnih merah in modularni sestavi, zaradi česar ga je mogoče enostavno integrirati v obstoječe polnilne linije. Opremljen je tudi s centralizirano HMI nadzorno ploščo, preko katere operaterji upravljajo vsakodnevne procese. Takšen vmesnik poenostavi delovne postopke in omogoča hitre prilagoditve proizvodnih parametrov ali formatov embalaže. Intuitiven nadzor poveča učinkovitost ter omogoča spremljanje procesov v realnem času.

Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting – Nkodpjr Hr D Nsfx Advow Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation. Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the controller T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock fence jaw clamping system T 2790-La Console for feed stand attachment, left side The photo shows a sample machine only / feed and support are not included Included items are detailed in the description Location: Arriving at stock 54634 Bitburg – Available in two weeks –

Stanje: rabljeno, Leto izdelave: 2011, EUROMAC MTX FLEX6 Nedpfsynkqzsx Advskw

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3300 x 2100 x 2100 mm Weight: 1,500 kg Total power requirement: 20 kW CNC Machining Center ROUTERMAX 1325 FLEX 4SP - X-axis working area: 1,300 mm - Y-axis working area: 2,500 mm - Z-axis working area: 180 mm - 4 x 3.2 kW water-cooled milling spindles, ER 25, with CHILLER CW 3000 cooling unit - The 4 spindles can be controlled independently or operate simultaneously - 4 x chip extraction hoods - Spindle speed: 6,000 – 24,000 rpm - Travel system (X & Y axes): rack-and-pinion drive - Travel system (Z axis): ball screw drive - Travel motors: stepper motors - Max. traversing speed: 20 m/min - Max. working speed: 12 m/min - Working accuracy: 0.05 mm - Vacuum grid table with 4 zones and T-slots - 5.5 kW dry-running, air-cooled vacuum pump - Tool length sensor - Controller: DSP type NK 105 - Interface: USB - CAD/CAM software: Vectric Cut2D PRO (NESTING included) - Electrical connection: 3-phase 400 V, 50 Hz Nsdpfx Aev A Haqsdvskw - Operating temperature range: 0–45°C - Width: 2,100 mm - Length: 3,300 mm - Weight: 1,500 kg

Stanje: novo, Sheet width: 1020 mm Sheet thickness: 2.5 mm Opening width: 48.0 mm Opening width without segments: 150 mm Max. bending angle: 0 - 135° Working height: 900 mm Machine weight: approx. 340 kg Space requirement: approx. 1350 x 820 x 1300 mm Nedpfxsxaa E Ds Advjkw Features: - Swivel bending machine with segmented upper, lower, and bending beams - Universally applicable bending machine for roofing and repair shops - Robust construction in modern design - Easy adjustment of the upper beam via foot pedal - Hands free for handling the workpiece - Manual bending machine for standard bending operations - Segmented upper beam allows for a wide range of bending options - Excellent price-performance ratio - Fast and simple bending process with bow handle - Non-slip rubber foot pedal for safe operation - Easy adjustment of the lower beam to suit sheet thickness - High upper beam for fabricating high upturned profiles Scope of supply: - Segmented upper, lower, and bending beams - Manual backgauge - Corner segments left / right each: 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Stanje: novo, Sheet width: 1270 mm Sheet thickness: 2.0 mm Opening width: 48.0 mm Opening width: 150 mm without segments Max. bending angle: 0 - 135° Working height: 900 mm Machine weight: approx. 465 kg Space requirement: approx. 1620 x 1070 x 1280 mm Njdpexabqujfx Advokw Equipment/features: - Folding bending machine with segmented upper, lower, and bending beam - Universally applicable bending machine for tinsmiths and repair workshops - Robust construction with modern design - Easy adjustment of the upper beam via foot pedal - Hands remain free to handle the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam allows a wide variety of bending options - Excellent price-performance ratio - Quick and simple bending process using bow handle - Non-slip rubber covering on foot pedal for safe operation - Easy adjustment of the lower beam according to sheet thickness - High upper beam for producing profiles with tall upstands Scope of delivery: - Segmented upper, lower, and bending beam - Manual rear stop - Corner segments left/right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270 mm

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 20.233 h, Uporabljen Tetra Pak Cap Applicator 30/Flex za Helicap23 2012 Tetra Pak Cap Applicator 30/Flex za Helicap23 je avtomat za zapiranje plastenk, ki ga je leta 2012 izdelalo podjetje Tetra Pak®. Naprava je posebej zasnovana za nanašanje plastičnih navojnih pokrovčkov na embalažo in zagotavlja varno zapiranje ter učinkovito proizvodnjo. S kapaciteto 9.600 steklenic na uro (BPH) ponuja visoko zmogljivo rešitev za embalažno industrijo. Tehnične specifikacije: Nkedpfx Aevgufpjdvjw - Proizvajalec: Tetra Pak® - Model: 30 Flex for Helicap 23 - Leto izdelave: 2012 - Zmogljivost: 9.600 BPH Stroj je primeren za 1000 slim format. Tip pokrovčka in smer vrtenja: Avtomat za zapiranje je združljiv s plastičnimi navojnimi pokrovčki, ki zagotavljajo zanesljivo zapiranje. Smer vrtenja je v smeri urinega kazalca, kar omogoča pravilno nameščanje pokrovčkov na embalažo. Trenutno stanje in varnostne značilnosti: Trenutno je Tetra Pak Cap Applicator 30/Flex za Helicap23 v skladišču. Opremljen je z varnostnimi funkcijami, ki ščitijo operaterje in zagotavljajo varno delovno okolje. Navodila in delovne ure: K stroju so priložena vsa potrebna navodila za upravljanje, vzdrževanje ter odpravo napak. Ti viri omogočajo učinkovito uporabo in vzdrževanje stroja. Stroj je bil do zdaj v uporabi približno 20.233 ur. Električni podatki: Napajanje stroja je V: 400, kW: 6,7 ter frekvenca 60 Hz, kar zagotavlja optimalno delovanje in porabo energije v predpisanih mejah. Zaključek Tetra Pak Cap Applicator 30/Flex za Helicap23 je zanesljiv avtomat za zapiranje, izdelan leta 2012. Z zmogljivostjo nanašanja plastičnih navojnih pokrovčkov s hitrostjo 9.600 BPH je odlična rešitev za učinkovite procese pakiranja. Opremljen z varnostnimi funkcijami in priloženimi navodili je ta avtomat zasnovan za varno zapiranje in konstantno delovanje ter predstavlja dodano vrednost embalažni industriji.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 17.900 h, Gebrauchter WrapAround Packer BAUMER Baujahr 2013 Einleitung Im anspruchsvollen Umfeld der Abfülltechnik setzt der gebrauchte WrapAround Packer BAUMER 2013 ein klares Zeichen für Qualität und Effizienz. Hergestellt vom renommierten Hersteller Baumer, zeichnet sich diese Maschine durch Zuverlässigkeit und Anpassungsfähigkeit aus und erfüllt präzise die vielseitigen Anforderungen moderner Produktionslinien. Überragende Leistung des Baumer WrapAround Packers Das Herzstück der Maschine bildet eine beeindruckende Taktleistung von 1.500 Kartons pro Stunde, was die konsequente Effizienz dieses Packers unterstreicht. Diese hohe Leistung steigert nicht nur die Produktivität, sondern gewährleistet gleichzeitig eine schonende, präzise Verpackung. Mit bis zu 10 verfügbaren Formatwechseln überzeugt die Anlage zudem durch maximale Flexibilität und ermöglicht einen reibungslosen Wechsel zwischen verschiedenen Gebindeformen. Fokus auf Sicherheit und Zuverlässigkeit Im industriellen Umfeld steht Sicherheit an oberster Stelle. Der gebrauchte WrapAround Packer verfügt daher über modernste Sicherheitsausstattungen, die dem Bedienpersonal optimalen Schutz bieten. Umfassende Dokumentationen und Wartungsunterlagen sorgen für einen reibungslosen Betrieb und erlauben effiziente Instandhaltungsarbeiten, wodurch Produktionsunterbrechungen minimiert werden. Intelligentes Betriebsmanagement mit Siemens S7 Steuerung Für einen störungsfreien Betrieb ist die Maschine mit einer Siemens S7 SPS ausgestattet, die eine zuverlässige und flexible Steuerung aller Prozessabläufe ermöglicht. Ein weiterer Vorteil ist die gute Ersatzteilverfügbarkeit, welche Ausfallzeiten reduziert und somit eine hohe Produktivität sicherstellt. Optimale Maße für flexible Integration Zur optimalen Anpassung an verschiedenste Produktionsumgebungen überzeugt der WrapAround Packer BAUMER 2013 mit ausgewogenen Abmessungen: Länge 11.248 mm, Breite 2.458 mm, Höhe 2.670 mm. Mit einem Maschinengewicht von 5.300 kg bietet die Anlage eine stabile und flexible Lösung zur Integration in bestehende Anlagenlayouts. Njdpfsvgvulox Advskw Fazit: Maßstäbe für die Abfülltechnik Der gebrauchte WrapAround Packer BAUMER 2013 steht beispielhaft für Innovationskraft und Präzision in der Flaschenverpackungstechnik. Die Kombination aus Spitzenleistung, Zuverlässigkeit und flexibler Anpassung hebt industrielle Standards auf ein neues Niveau und bietet eine optimale Lösung zur Steigerung der Effizienz moderner Produktionslinien. Mit jedem Zyklus bestätigt diese Maschine ihre Rolle als verlässlicher Leistungsträger im dynamischen Abfüllsektor.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), CME MB 3000 Flex milling machine in ready-to-use condition, year of manufacture 2006 Rotary table size: 1,400 x 1,400 mm Max. table load: 12 t Longitudinal travel (X): 3,000 mm Vertical travel (Y): 2,000 mm Nedpfxjgui Txj Advokw Cross travel (Z): 1,000 mm Quill travel (W): 700 mm Rotary table (B): 360 - 0.001 degrees Boring spindle diameter: 150 mm Spindle speed: 50–2,200 rpm Spindle taper: ISO 50 Spindle motor power: 30 kW Ram size: 580–430 mm CNC controller: Heidenhain iTNC530 Accessories: Through-spindle coolant, 60 bar Automatic tool changer (ATC): 60 positions Operating hours: Spindle: 27,048 hours Machine dimensions: Height: 4,856 mm Length: 6,663 mm Width: 10,000 mm Weight: 70 t Year of manufacture: 2006