Flex nakup rabljenega (3.889)

Stanje: rabljeno, Leto izdelave: 2005, Vrsta materiala: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulat Dimenzije stroja (D x Š x V): 16 x 5 x 10,5 m Min./maks. širina končnega filma: 900 / 1700 mm Debelina filma: 27–200 µm Kapaciteta: do 240 kg/h Hitrost linije: 0–150 m/min Premer polža: 55/65/55 mm Razmerje plasti: do 25/50/25 % Razmerje L/D: 30/1 Število ogrevalnih con: 3 za 55 mm in 4 za 65 mm (1 cona na sitko) Dozirni sistem: Doteco Grado; 3 enote s po 4 komponentami; centralizirana vakuumska črpalka (dodana naknadno); vse tehtnice servisirane lani; nova programska oprema in eksterni zaslon na dotik; vrat pred ekstruderjem z dodatnimi magneti Elektronika: Siemens, ABB Programska oprema: Macchi; popoln nadzor prek zaslona na dotik (zamenjan pred 3–4 leti) Glava za piho z IBC: 280 mm; razmak 2,4 mm (3 ogrevalne cone); model TE502 z razširitvijo zračnega obroča Nadzor premera notranjega hladilnega balona (IBC): Ultrazvočni senzor (1 enota); JET notranji hladilni sistem Zračni obroč: Karat s 3 zračnimi vhodi, 45 segmenti (ventili), z integriranim nadzorom debeline Ventilator zračnega obroča: DA Hladilni agregat za termoregulacijo: DA (Eurochiller) Kletka za balon: DA; valji s silikonsko prevleko; motorizirano elektronsko upravljanje; dodatna kletka z motoriziranim odpiranjem/zapiranjem in nastavitvijo Kontrola debeline: K design (Karat, Kundig K-150); kontaktni sistem integriran v zračni obroč Kolapsni okvir: Prosto tekoči aluminijasti valji Rotacija: Zgornja vlečna valja 1800 mm (maks. širina filma 1700 mm); motorizirano odpiranje/zapiranje; motor za regulacijo hitrosti; ostali prosti aluminijasti valji; 2 keramična zračna valja za hlajenje Vodno hlajeni valji za zgornjo vlečno valjo: / Centriranje filma: 2 ultrazvočna senzorja (Five) Korona obdelava (obojestranska): DA (F&B); nad navijalniki; 8 kW generator; izvlečni sistem za ozon in detektor filma; širina elektrode 10 mm Navijalniki: Back-to-back Model navijalnika: Model BO; zgornja vlečna valja 1800 mm (maks. širina filma 1700 mm); ročno vstavljanje puš; maks. premer role 1000 mm; prikrajkovanje in večizhodne role; napenjanje filma in kontrola navijanja; 2 banana valja; 'leteči nož' (nova Origa nož pred nekaj leti); vključen električni razdelilnik Puše: 4 x 76 mm in 4 x 152 mm Kodpew Nhavsfx Ah Dsnc Odvzem prikrajkov (trim suction): DA; vključuje Supergrillo regranulacijski sistem Konstrukcija ogrodja: DA Vgrajena moč: Pribl. 150–200 kW (400 V, 3-fazno)

Stanje: novo, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 Width: 1230 Kjdpfefk Ah Nox Ah Donc Length: 2480 Weight approx.: 675 kg The welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, working with electrically powered tools, or working with chemical and oily substances. The tables are equipped with transport rods in the base rails, allowing them to be easily moved using a pallet truck and quickly adjusted in height to match other work surfaces. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts or blows—such as those that occur frequently when working with heavy hand tools or handling very heavy metal workpieces or tools—without causing permanent deformation or indentations. The metal worktop allows for unrestricted use of magnetic clamps to fix components in place. Thanks to its high dead weight, this universally applicable table offers excellent stability against tipping, even when loaded with heavy items or tools at its highest working position. For accessories and further information, please follow this link:

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), An on-site inspection is possible. Knsdpjnk Uwxefx Ah Dsc

Obratovalne ure: 1.685 h, Stanje: rabljeno, Contact ATS Norway for further information. Please provide the reference number upon inquiry: 20543 Kjdpfewvz Axex Ah Dsnc Specifications: Model year: 2015 Operating hours: approx. 1,685 Weight: approx. 1,955 kg Maximum gradeability: 16% Fuel: Diesel Condition / Notes: Stops in case of excessive resistance Missing side brush Operating hours: 1,685 Total weight: 1,955 kg

Leto izdelave: 2016, obratovalne ure: 6.210 h, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: MA0084_S0040858, Used frequency-controlled screw compressor ALMIG FLEX 7 Year of manufacture: 2016 Operating hours: 6,210 h (Maintenance performed at 6,210 h) Technical specifications: Type: Flex 7 (manufactured in Germany) Adjustable operating overpressure of the unit (stepless): 5 - 13 bar Free air delivery at minimum / maximum speed, measured according to ISO 1217 Annex C at 5 bar (g): 0.55 / 1.32 m³/min Knjdpfx Asglz U Doh Dsc at 6 bar (g): 0.54 / 1.25 m³/min at 7 bar (g): 0.53 / 1.19 m³/min at 8 bar (g): 0.53 / 1.11 m³/min at 9 bar (g): 0.53 / 1.04 m³/min at 10 bar (g): 0.52 / 0.97 m³/min at 11 bar (g): 0.52 / 0.89 m³/min at 12 bar (g): 0.52 / 0.82 m³/min at 13 bar (g): 0.52 / 0.76 m³/min Input power of the entire system at minimum / maximum speed, measured according to ISO 1217 Annex C at 5 bar (g): 3.89 / 8.11 kW at 6 bar (g): 4.26 / 8.30 kW at 7 bar (g): 4.63 / 8.53 kW at 8 bar (g): 5.01 / 8.63 kW at 9 bar (g): 5.38 / 8.73 kW at 10 bar (g): 5.75 / 8.79 kW at 11 bar (g): 6.12 / 8.82 kW at 12 bar (g): 6.50 / 8.81 kW at 13 bar (g): 6.87 / 8.77 kW Rated drive motor power: 7.5 kW Degree of protection / insulation class drive motor: IP55 / H Operating voltage / frequency: 400 / 50 / 3 V/Hz/Ph Sound pressure level (DIN 45635 part 13) at 50% load: 57 dB(A) at 100% load: 58 dB(A) Compressed air connection: 3/4" G Dimensions: Length: 870 mm Width: 590 mm Height: 990 mm Weight: 165 kg On over 400 sqm, we continuously have a large selection of compressors from 0.5 to 55.0 kW in stock! All machines are operational (Plug & Play) and can be taken away immediately. Visit us at our premises in Erlangen.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, največja širina izdelka: 330 mm, delovna širina: 330 mm, EFLEX 330 2S (v provoze od roku 2021, v provozu pouze na částečné směny; méně než 300 tiskových hodin): Prodejní cena: 350 000 € + příslušenství 20 000 € Ceny jsou uvedeny EXW Košťany nad Turcom, Slovensko, bez DPH, bez (de)instalace a bez uvedení do provozu. Stroj byl pravidelně servisován a je připraven k odběru či zákaznickému testování/produkci. 8barvový UV flexotiskový stroj: Model eFlex 330-2 S Kompletní servopohon eFLEX 330 – 2 S & šikmé ozubení 8 barev + rozšířený vysekávací modul 2x vysekávací jednotka + archovačka VOLITELNÉ SUŠICÍ SYSTÉMY 8x IR lampa & horkovzdušné sušení 8x UV lampa + chladicí válce & chladič OSTATNÍ MOŽNOSTI – ZAHRNUTO Předregistrační systém Automatická registrace Druhý průchod Upgrade – hydraulické zvedání odvíječe Koronový výboj – jednostranný (2 kW) Čistič pásu (oboustranný) s antistatickou úpravou Kolejnicový systém Otočný příčník s delaminací-re-laminací (na kolejnici) Studená ražba (na kolejnici) Archový stohovač (dopravník) Peel & Reveal Barvicí válec s pneumatickým upínáním Kodsrxrx Sopfx Ah Denc Antistatická jednotka 4 tyče Adaptéry na rotační vysekávání (1 sada) Odsávání okrajových odřezků (Venturi) – vyžaduje přívod vzduchu Obrácené převíjení Video inspekční systém (oboustranné sledování E + L) Zařízení FOCUS pro montáž tiskových desek Platemate Plná délka kolejnice – upgrade Navíjení odpadové fólie „snow ball“ na kolejnici Příslušenství: Převody (šikmé ozubení) Tiskový válec Magnetický vysekávací segment 84T (266,700 mm) 8x tiskový válec 1x magnetický válec 96T (304,800 mm) 8x tiskový válec 1x magnetický válec 99T (314,325 mm) 8x tiskový válec 1x magnetický válec 105T (333,375 mm) 8x tiskový válec 1x magnetický válec 117T (371,475 mm) 8x tiskový válec 1x magnetický válec 88T (pryžový návlek) 1x lakovací válec 69T (219,075 mm) 1x magnetický válec + 17 ks aniloxových válců

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), CME MB 3000 Flex milling machine in ready-to-use condition, year of manufacture 2006 Rotary table size: 1,400 x 1,400 mm Max. table load: 12 t Longitudinal travel (X): 3,000 mm Vertical travel (Y): 2,000 mm Cross travel (Z): 1,000 mm Quill travel (W): 700 mm Rotary table (B): 360 - 0.001 degrees Boring spindle diameter: 150 mm Spindle speed: 50–2,200 rpm Spindle taper: ISO 50 Spindle motor power: 30 kW Ram size: 580–430 mm CNC controller: Heidenhain iTNC530 Accessories: Through-spindle coolant, 60 bar Automatic tool changer (ATC): 60 positions Operating hours: Ksdpfx Ahegui Txj Donc Spindle: 27,048 hours Machine dimensions: Height: 4,856 mm Length: 6,663 mm Width: 10,000 mm Weight: 70 t Year of manufacture: 2006

Stanje: novo, Dimensions (LxWxH): 1480 x 980 x 65 to 105 mm Width: 980 mm Length: 1480 mm Approx. weight: 371 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, everyday workstations designed for handling heavy workpieces, operating electric tools, or working with chemical or oily substances. The tables can be easily moved using transport rods in the base rails with a pallet truck, and the height can be quickly adjusted to match other work levels. The height adjustment ranges from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows, such as those often occurring when using heavy hand tools or handling very heavy metal workpieces or tools, without causing permanent deformation or notching. The metallic work surface allows unrestricted use of magnetic clamps for fixing components. Due to its high own weight, this universally applicable table provides excellent stability and safety against tipping over, even when supporting heavy items or tools in its highest position. For accessories and further information, please follow this link: Knsdpfx Aofk Ah Reh Djc

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. Knjdofk Aifepfx Ah Doc When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Ksdpjfk Aivofx Ah Djnc Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Knodpjfk Aicsfx Ah Djc Price must be confirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This enables the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 hole grid. Used in combination with machining equipment, the table allows test or finishing fixtures (deburring, marking, or inspection) to be adapted to the height of the machine's clamping table. The table systems can be relocated easily using a pallet jack. These mobile systems, with their various fastening and safety features, have proven ideal for the maintenance of injection molding and die-casting tools. After removal from the machine, tools can be serviced safely on-site and transported to maintenance for repairs. The fully bolted construction of the clamping plate allows for the cost-effective replacement of the work surface in case of wear. Knodpfx Aefk Ainoh Dsc Price must be obtained from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Knsdpfx Aofk Aipoh Dsc Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Kedofk Ai Aepfx Ah Djnc Table width: 950 mm Table length: 1950 mm Weight approx.: 358 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Dimensions (LxWxH): 2980 x 1480 x 65 to 105 Kedpofk Ah Ijfx Ah Donc Width: 1480 mm Length: 2980 mm Approximate weight: 840 kg Welding and assembly tables from the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, operating electrically powered tools, or working with chemical and oily substances. Thanks to transport bars integrated into the base, the tables can be easily moved with a pallet jack and their height can be quickly aligned with other working surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows—such as those common when using heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformation or dents. The steel worktop also allows unrestricted use of magnetic clamps for securing components. Due to its substantial dead weight, this universally applicable table offers excellent stability against tipping, even under heavy loads or tools and when set at its maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 425 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Standard height adjustment is performed manually via a hydraulic system within the 650 – 1050 mm range (other heights available upon request). The worktop also features a Ø 28 mm hole grid with a 100 x 100 mm spacing, just like the SST fix series. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems can be easily relocated on site with a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools due to their various mounting and securing options. After removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. The following Table 2 provides an overview of the available standard models. Kedpfx Ahjfk Aixj Denc Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Knsdpfx Aefk E Dzjh Dsc Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Weight approx.: 428 kg This allows the user to flexibly adjust the working surface height to meet the specific requirements, thereby improving productivity and ergonomics. Height adjustment is standardly performed by a manual hydraulic system in the range of 650 – 1050 mm (higher or lower adjustment available upon request). The table systems can be easily moved on site with a pallet truck. These mobile systems have proven ideal, particularly with various fastening and securing options, for maintenance of injection molding and die casting tools. After removal from the machine, tools can be safely serviced on site or transferred to the maintenance department for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The price must be requested from the manufacturer before ordering! For accessories and further information, please follow this link: Knsdpfx Ahogrvwij Dsc

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 490 kg This enables the user to flexibly adjust the working surface height according to the specific requirement, improving efficiency and ergonomics. The height adjustment is performed as standard by a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). Like the SST fix series, the tabletop features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, inspection or finishing fixtures (deburring, marking, inspection) can be adapted to the clamping table height of the machine. The table systems are easily moved on site using a pallet truck. These mobile systems have proven ideal, with various mounting and securing options, for the maintenance of injection moulding and die casting tools. Once removed from the machine, the tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. Price must still be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link: Knsdpfxofk E D De Ah Doc

Stanje: novo, Dimensions (LxWxH): 1980 x 1480 x 65 to 105 mm Kjdogrz Tdepfx Ah Djnc Width: 1480 mm Length: 1980 mm Weight approx.: 575 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for processing heavy workpieces, handling electrically powered tools, or working with chemical and oily substances. Thanks to transport handles on the base, the tables can be easily relocated with a pallet truck and the height can be smoothly adjusted to different working levels. The height adjustment range covers 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts and blows—such as those that commonly occur when using heavy hand tools or handling very heavy metal workpieces or tools—without sustaining lasting deformations or notches. The metal worktop allows unrestricted use of magnetic clamps for securing components. Due to its high dead weight, this universally applicable table provides excellent stability and safety against tipping, even when loaded with heavy objects or tools at the maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 464 kg This system allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic mechanism in the range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection molding and die-casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transported for repairs to maintenance. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The following Table 2 provides an overview of the available standard models. Knsdpfx Ahjgrz Tle Dec Price must be reconfirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 475 kg This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic mechanism within a range of 650 – 1050 mm (other heights available on request). The worktop, as with the SST fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with processing machines, inspection or post-processing devices (such as deburring, marking, or testing fixtures) can be adjusted to match the clamping table height of the machine. The table systems can easily be relocated using a pallet truck. These mobile systems, with their various fixing and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and then moved to maintenance for repairs. The fully bolted design of the clamping plate enables cost-effective replacement of the working surface in case of wear at a later date. Kjdefk E D Aepfx Ah Dsnc Price must be confirmed with the manufacturer prior to ordering! For accessories and additional information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Kjdpfxsgrvv Ts Ah Djnc Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 308 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 mm Table width: 900 mm Table length: 1400 mm Approx. weight: 305 kg This allows the user to flexibly adjust the working surface height according to specific requirements to improve efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). Kedpogrvwbofx Ah Dsnc The table systems can easily be relocated onsite using a pallet truck. These mobile systems have proven ideal due to their various fastening and securing options for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced onsite and then transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be requested from the manufacturer prior to ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 602 kg This enables the user to flexibly adjust the working surface height to the respective requirements, improving efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 800 mm (other heights available on request). Like the SST fix series, the worktop also features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, test or reworking devices (deburring, marking, inspection) can be adjusted to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely maintained on site immediately after removal from the machine and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, if the work surface wears out over time, it can be replaced cost-effectively. Price must be requested from the manufacturer before ordering!! Kjdpfx Ajgrz Ttjh Djnc For accessories and further information, please follow this link: