Dvižni Sistem nakup rabljenega (17.055)

Stanje: dober (rabljeno), Leto izdelave: 2004, Working container gross volume: 350 liters Usable volume: 170 liters Dkedpet E R Rhefx Ag Neu Maximum workpiece dimension (measured diagonally): 220 mm Total weight: 731 kg Drive power at 1500 rpm: 2.6 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Extraction System L+M EcoCell 3.9-1200 C TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of manufacture: February 2020 Airflow rate: 3,000 m³/h Voltage: 400 V Current draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control unit: Reco RM-DPC Micro FP Filter status display: FC-240 Spark detection: Control Logic PAN-705 Spark Control Panel Filter elements: 9 pieces SCOPE OF DELIVERY Including (non-exhaustive list): Djdpfx Agexflx Ts Njku - Extraction system L+M EcoCell 3.9-1200 C - Filter status display - Spark detection system - 9 x filter elements - VDL rotary airlock with electric drive - Control cabinet with operating elements - Additional WESCO separator Exact scope of delivery as per photo series The extraction system L+M EcoCell 3.9-1200 C was manufactured in February 2020 and provides a powerful and safe solution for industrial extraction and filtration requirements. With an airflow rate of 3,000 m³/h, a rated power of 5.50 kW, and robust ATEX certification according to 2014/34/EU, this unit is ideally suited for use in potentially explosive atmospheres. Its state-of-the-art Reco RM-DPC Micro FP control unit, together with the FC-240 filter status display, enables precise monitoring and operation. Additional safety is ensured by the integrated PAN-705 spark monitoring system. Nine high-performance filter elements provide efficient dust particle separation. Equipment also includes a VDL rotary airlock with motor drive, a control cabinet with operating elements, and an additional WESCO separator. This equipment combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, for the measurement of components with standard geometries and freeform surfaces. Especially suitable for large, bulky parts or for measuring components directly on the machine. Specification Dksdpfx Ajxgfy Tsg Nju • 3D measuring arm with six axes and rotary/tilt probe head • Probe system with automatic stylus recognition and integrated digital camera with illumination • Probe set: stylus with 3mm and 5mm ruby ball and 15mm steel ball • Including calibration sphere or certified 2m test bar • Mounting plate with mounting holes or magnetic attachment • Measuring range depending on model: 1500mm to 4500mm • Measuring and evaluation software: PCDMIS Portable • Single-point repeatability according to B89.4.22 and VDI/VDE 2617-9 Advantages • SmartLock: reliable locking in rest position and fixation in intermediate positions • Carbon fiber double-tube design ensures separation of stability and measurement • Patented rotation axes with unlimited rotation • Absolute encoders allow instant operation without referencing • Probe holder for easy, quick stylus changes with automatic stylus recognition Note Laser scanner and mobility pack with lithium-ion battery available optionally as an upgrade.

Leto izdelave: 2014, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For continuous cleaning of components Continuous-throughput cleaning system made of stainless steel, equipped with oil separator for uninterrupted material flow. The items to be cleaned are conveyed continuously, or in cycles if required, through sequential treatment zones. Cleaning is performed as the workpieces pass by fixed nozzle systems. Suitable for parts with approximate dimensions of 400 x 100 mm. A wire link conveyor transports the parts through the cleaning system, either lying flat or standing upright. - Surrounding nozzle frame – offset nozzle arrangement enables all-round cleaning - Separation of treatment zones reduces cross-contamination - Customisable nozzles and frames for specific components - Adaptable working dimensions, load capacities and pump performance available upon request Process steps are performed in consecutive treatment zones: - Spray cleaning with sequential wet treatment zones (washing, degreasing, phosphating, rinsing, passivating) - Drying Dsdpfxjxcun Ee Ag Njku Tank volumes: Washing tank: 800 litres Rinsing tank: 500 litres Heating power: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pump: 3.0 kW Rinsing tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip trays for leakage protection. These are included in the price and will be supplied. TWO IDENTICAL MACHINES AVAILABLE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Na voljo je naprava za odsesavanje in filtriranje lesnega prahu Krämer za žagine linije. 1) Odsesavanje lesnega prahu Krämer VKA-P 100/650/55, pretok zraka: 27.000 m³/h, povišanje tlaka: 3.800 Pa, moč motorja: 55 kW, dolžina klinastega jermena: 3.550 mm. 2) Filter naprava Krämer GFS Shake 160/25/250, filtrirna kapaciteta: 30.000 m³/h, filter material: poliester igelni filc, izločanje materiala: TFS40/10/1,1. 3) Ventilator Krämer VFM-R 45/250/3, pretok zraka: 3.000 m³/h, povišanje tlaka: 2.500 Pa, moč motorja: 3 kW. 4) Ventilator Krämer VFM-P 42/200/4, pretok zraka: 2.500 m³/h, povišanje tlaka: 3.000 Pa, moč motorja: 4 kW. 5) Separacijska posoda/filter lijak Krämer. 6/7) 2x aksialna ventilatorja. Vključno s cevmi in periferijo. Pri iztiskovalnem motorju je poškodovana prirobnica motorja. Dokumentacija je na voljo. Ogled na lokaciji je možen. Dedpoxl Elgofx Ag Njku

Stanje: rabljeno, Leto izdelave: 1997, KEG-naprava Stroj (dodatno): Stroj za notranje izpiranje in polnjenje Moč: 8 kW Dsdpfxjxbqh Sj Ag Nsku Napetost: 400 V Frekvenca: 50 Hz Dolžina: 1400 mm Širina: 1100 mm Višina: 2300 mm Formati: KEG sodi 10–50 l s ploščatim priključkom Upravljanje / Krmiljenje: Upravljalna konzola OP7, Siemens Simatic S5 - 95U Material: nerjaveče jeklo Postavitev / Položaj: prostostoječe Osnovna konstrukcija: konstrukcija iz kvadratnih cevi na kupolastih nogah Oprema: 1 rezervoar za čistilo, električno ogrevan; 1 kombinirana čistilna in polnilna postaja s ploščatim priključkom; 1 črpalka iz nerjavečega jekla; 1 nerjaveča omara za upravljanje Teža: 250 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 25 mm, merilno območje os Z: 1 mm, pomik po osi Z: 550 mm, Dobro ohranjen Mahr merilnik hrapavosti SD26 s pripravo za merjenje osi in gredi, proizvajalca Messtechnik Triesen. Dksdpsxddf Nofx Ag Nju Merilna območja: Z = 0,8 mm (stebriček nastavljiv po višini ročno) X = 25 mm Stroj je bil popolnoma obnovljen in preverjen. Naložen je računalnik (Windows 10) ter Mahrova merska programska oprema. Obsežen komplet novih rezervnih tipal. Vključuje podstavek za računalnik in tiskalnik ter dodatno opremo. Cena velja za dostavo znotraj EU.

Stanje: rabljeno, prevoženi kilometri: 370.000 km, prva registracija: 08/2019, Leto izdelave: 2019, DB AROCS 2551 / 2651 BL 6X4 HAD Hydrodrive Roll-off Tipper with PALFINGER Body !EXCELLENT CONDITION! Chassis: • Emission Standard: EURO 6 D • Streamspace Cab • Retarder / Intarder • Automatic Transmission • Reinforced Engine Brake • Automatic Climate Control • Auxiliary Heater • Hill Start Assist • Differential Lock • ASR – can be deactivated • Adaptive Cruise Control • Lane Keeping Assist • Brake Assist • Collision Warning System • Reversing Warning System • Leaf / Air Suspension • 3rd Axle: Air / Lift Axle • Disc Brakes • Multifunction Steering Wheel • Airbag • Refrigerator • Central Locking System • Electric Windows and Mirrors • Bluetooth Hands-free System • CD Radio • CB Radio • Telephone • Navigation System • 1 Bunk / Bed • Auxiliary Heater • Rear Window • Trailer Hitch (jaw coupling) • Hydraulic Connection at Rear for Trailer • Duo-matic Coupling • Hydraulically Extendable Rear Underrun Protection • Reversing Camera • 1 x 600 Liter Aluminum Tank • Gross Vehicle Weight: 26,000 kg • Curb Weight: 12,240 kg • Payload: 13,760 kg • Gross Combination Weight: 44,000 kg Tyres: • 1st Axle: 385/65 R 22.5 • 2nd Axle: 315/80 R 22.5 • 3rd Axle: 385/65 R 22.5 • ALCOA Durabright Rims Body: • PALFINGER Roll-off Body Type T20 • Year of Manufacture: 2019 • Remote Control • Articulated Arm • 20,000 kg Loading Capacity - TÜV/HU and SP: new! - German Vehicle! Dkedpfexgt Ufsx Ag Nsu - 1st Owner Errors and prior sale excepted! = Further Information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for more information.

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Dodpfx Agswf U Ruo Nsku Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Stanje: rabljeno, Leto izdelave: 2018, Nazivni volumenski pretok: 5089 m³/h Priključek za sesanje: Ø 300 mm Podtlak na priključku: 2434 Pa Čiščenje filtra: stisnjen zrak Zbirna prostornina za ostružke: 3 x 165 litrov Moč motorja: 7,5 kW | 400 V - 50 Hz / IE3 Raven zvočnega tlaka: 71 dB(A) Max. priključek stisnjenega zraka: 6,0 bar Varovalka: 25 A Dimenzije (DxŠxV): 3050 x 1058 x 2361 mm Teža (neto): cca. 952 kg Dkodsxcp Dhepfx Ag Nju Lokacija skladišča: pri dobavitelju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Na voljo je stožčasto zobniško preskusno stojalo Gleason. Premer obdelovanca: 330 mm, maks. razdalja med središči: 203 mm, razpon razdalje nosu pogonske vretenaste osi: 100 mm-250 mm, maks. premik gor/dol: 203 mm/50 mm, premer izvrtine pogonske vretenaste osi: 99 mm, stožčavost pogonske vretenaste osi: 15,5 mm/m, premer izvrtine proti vretenu: 58 mm, stožčavost proti vretena: 12,7 mm/m, hitrost vretena: 1500 obr/min, preizkusni kotni razpon: 0°-180°, ponovljivost pogonske vretenaste osi: +/-0,004 mm, krožnost: +/-0,003 mm, dimenzije stroja X/Y: cca 1550 mm/2050 mm, teža: cca 2400 kg. Ogled na lokaciji je možen. Dkodpfexltu Nsx Ag Nsu

Stanje: rabljeno, Cleaning-in-Place sistem za zaprto čiščenje procesnih naprav. Sestavljen je iz pravokotne posode, razdeljene na 2 prekata. Vsak prekat ima snemljiv pokrov ter iztočno cev z ročnim ventilom. Opremljen je z dozirnimi črpalkami za kislino, lug in razkužilo ter centrifugalno črpalko za CIP-cirkulacijo. Stroj (opomba): z 2 pravokotnima prekatoma Dolžina: 3,7 m Širina: 0,5 m Dedsxbptmspfx Ag Njku Višina: 1,5 m Upravljanje / krmiljenje: ročno Material: nerjavno jeklo Oprema: pravokotna posoda z 2 prekatoma, ventili (vsi ročni), obtočna črpalka, dozirne črpalke Teža: 300 kg

Leto izdelave: 2023, obratovalne ure: 300 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hygienic dosing pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surface Elastomers with FDA compliance declaration Product-contacting parts are autoclavable Easy integration due to compact design Total length approx. 2300mm Nominal width approx. 350mm Total width including motor approx. 500mm Dodpfx Agoxcvzao Noku Belt top edge adjustable from 980 to 1080mm Base frame made from stable box section profiles Construction in stainless steel, material grade 1.4301 Double-sided knife edge, radius approx. 5mm Food-grade conveyor belt, brand: Habasit, color: white Central drive station Gear motor by SEW included Food-safe coating (subject to delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Includes adjustment frame for 5 dispensers by viscotec Adjustment is fundamentally handled via profiles and clamping units Height adjustment is manual via clamping units; all dispensers are set simultaneously. Each dispenser can be finely adjusted individually via elongated holes, if needed. Lateral adjustment for each dispenser is possible, as is tilt and adjustment in or against the conveying direction. Without lateral guides. Including engineering Including pre-assembly Including in-house installation of dispensers Including in-house testing Surface: conveyor made from stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made from aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop button, automatic on and off buttons Display for setting the speed in m/min and setting the delay time for the start signal for the dispenser Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with viscotec Emergency stop is currently only for our own machine. Including control cabinet build with 50% reserve capacity Including higher-grade sensors (distance photoelectric sensor, capable of measuring and evaluating distances) Including higher-grade control (hardware and software can be expanded at any time without replacing the control unit) Including HMI (display), approx. 7" size Including E-plan Including software Including in-house testing (interface test with viscotec) Finish: control cabinet completely made of stainless steel, sensors made of stainless steel and FDA-approved.

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 36.283 h, Funkcionalnost: omejena funkcionalnost, skupna širina: 1.800 mm, skupna dolžina: 3.000 mm, skupna višina: 3.000 mm, največja dovoljena obremenitev: 4.000 kg, ogrevalna zmogljivost: 18 kW (24,47 KM), Currently in stock, immediately available. Can be fully or partially overhauled upon customer request. Dodpjvmqrfsfx Ag Neku

Leto izdelave: 2012, Stanje: rabljeno, Technical data: Table support surface: Width x depth x max. clamping travel: 192 x 115 x 120 mm Height of cutting wheel center above table: 520 mm Cutting wheel height adjustment via cylinder with measuring system: 445 mm Cutting wheel dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Max. workpiece dimensions (length): Workpiece infeed: 3500 mm Workpiece outfeed: 2000 mm Min. workpiece dimensions (length): Workpiece infeed: 300 mm Workpiece outfeed: 300 mm Workpiece infeed: servo-controlled Dkedsvu U Hpepfx Ag Nsu Measuring path via measuring system: 3500 mm Peripheral speed: 25 - 60 m/sec Main motor: 10 kW Cutting system dimensions (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece infeed: 380 kg Workpiece outfeed: 350 kg Control cabinet: 280 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK02UXKP0312, 3D LASEROVÝ SKENER SCANTECH KSCAN20 Je to metrologickej triedy 3D skener s červeným a modrým laserom a zabudovanou fotogrametriou na veľmi presné ručné 3D skenovanie širokého rozsahu veľkostí objektov (od mince až po automobil!). Predávame prakticky nový skener vo výbornom stave, ktorý bol používaný len zriedkavo, niekoľkokrát ročne. Pôvodná cena nového skenera bola 40 000 eur v roku 2020. TECHNICKÉ ŠPECIFIKÁCIE: - Prvý režim skenovania: 14 červených krížových laserových čiar - Druhý režim: 1 červená čiara pre hlboké výrezy a otvory - Tretí režim: 5 paralelných modrých laserov na hyperdetailné skenovanie (extrémne detaily) - Zabudovaná fotogrametria: používanie kódovaných značiek pre ešte vyššiu objemovú presnosť pri skenovaní veľkých objektov ako autá, odliatky, konštrukcie a pod. - Presnosť: 0,020 mm - Objemová presnosť (závisí od veľkosti častí): 0,020 mm + 0,035 mm/m (červený laser); 0,010 mm + 0,035 mm/m (modrý laser) - Rozlíšenie: až 0,05 mm (červený laser); až 0,01 mm (modrý laser) Dsdpjxhfw Uefx Ag Nsku - Rýchlosť merania: 650 000 meraní za sekundu - Rozsah skenovania: až 550 mm x 600 mm - Rozsah skenovania (fotogrametria): 2500 mm x 3000 mm - Rozsah vzdialenosti: 500 mm (červený); 180 mm (modrý) - Hĺbka ostrosti: 620 mm (červený); 200 mm (modrý) - Hĺbka ostrosti (fotogrametria): 2500 mm - Opakovateľnosť jedného bodu: 0,030 mm - Presnosť na hrane: 0,030 mm - Výstupné formáty: .stl, .ply, .obj, .igs, .stp, .wrl, .xyz, .dae, .fbx, .ma, .asc PRÍSLUŠENSTVO - Pevný plastový prepravný kufor - Prepojovací USB 3.0 kábel a napájací adaptér na bežnú 230 V zásuvku - Originálny SCANTECH USB dongle s doživotnou licenciou - Originálny kalibračný certifikát a kalibračná podložka - ScanViewer softvér na skenovanie - Video návody (cca 8 videí) k skenovaniu a používaniu softvéru + manuál - Referenčné samolepiace vysoko reflexné značky (targety): - cca 500 ks, priemer 6 mm - cca 250 ks, priemer 3 mm - cca 100 ks predkódovaných referenčných magnetických markerov pre fotogrametriu - Dve originálne predkódované SCANTECH platne na skenovanie veľkých objektov pomocou fotogrametrie O softvéri ScanViewer: - Softvér na skenovanie, optimalizáciu siete a analýzu je bezplatný! Nie je potrebné žiadne ročné ani iné predplatné. - Získate najnovšiu podporovanú doživotnú verziu softvéru od Scantech zdarma. - Softvér ponúka množstvo užitočných funkcií na spájanie a meranie 3D skenov. Systém je veľmi rýchly pri spájaní komplexných sietí vďaka výpočtom na vašej grafickej karte pomocou skenovacích markerov. - Veľmi jednoducho sa dajú vytvárať CAD geometrické prvky ako valce, roviny, body alebo osi, ktoré je možné exportovať do formátu IGES či STEP pre ďalšie spracovanie v ľubovoľnom CAD systéme (CREO, CATIA, SOLIDWORKS, FUSION 360 a pod.). Navyše vieme poskytnúť krátku konzultáciu, kde vám predvedieme funkcie zariadenia a obsluhu. PC HARDVÉR: - Skenovanie prebiehalo na notebooku DELL PRECISION 7670 (Windows 10, 64 GB RAM, 512 TB SSD, Nvidia RTX A3000 s 12 GB VRAM).

Stanje: rabljeno, Leto izdelave: 2008, Kotlovnica na sekance Bioflamm SR-EB9, predgrelna rešetka, letnik 2008, leta 2018 vgrajen nov toplotni izmenjevalec, moč 830 kW, sistem za toplo vodo z največjo temperaturo 120°C, vključno s polžnim podajalnikom z zaščito proti povratnemu plamenu, vključno s transportnim trakom za gorivo, vključno z 2 kontejnerjema s potisnim dnom po 30 m³, vključno z avtomatskim odstranjevanjem pepela, vključno s hidravlično agregatom, vključno z nadzornim sistemom, demontažo mora izvesti kupec sam. Dksdpfx Asvytfujg Neu

Stanje: rabljeno, Leto izdelave: 2014, 2-posodna CIP-naprava za vroče čiščenje v avtomatskem režimu, sestavljena iz: - 2 čistilni posodi - povratna CIP črpalka Stroj (dodatno): 2-posodna CIP-naprava za vroče, izgubljeno čiščenje Volumen posode: vsaka po 1400 l Dolžina: 5412 mm Širina: 1550 mm Višina: 2928 mm Dodpfx Aoxbpbweg Nsku Oprema: 2 x čistilna posoda (ena izmed njih izolirana in oblečena na plašču), doziranje lugov in kislin, cevni toplotni izmenjevalnik z armaturami, pnevmatske lopute, vzorčevalnik, meritev vsebine, PT100, meritev prevodnosti in pretoka

Stanje: rabljeno, Elektro okrogli magnet, žerjavni magnet, dvižni magnet, dvižni magnet STEINERT tip LR 250-N-2 Tovarna št.: 421850 Premer magneta: 250 mm Poraba toka: 0,662 amperov Priključna napetost: 200 V DC = enosmerna napetost - Za uporabo z žerjavom Lastna teža: 32 kg Dsdpfxsxf Uyge Ag Nsku

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window production line ----- For sale on behalf of customer Manufacturer description: Designed for the production of individual parts, elements, and small series. Spindle arrangement: - One cross-cut saw - One single-sided tenoning and grooving spindle - One right-hand profiling spindle - One tenoning/grooving spindle and profiling spindle designed to hold multiple tools arranged vertically, with pneumatic spindle movement. Grooving table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit, manual height adjustment of the feed. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimensions. Control of tool positions (longitudinal and cross processing) via selector switch on the control panel. Technical Data ----- Cross-cut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and grooving spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Climb-cut spindle ----- Pneumatically cycled forward/backward for tear-free machining of window sashes, frames and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, minimum tool diameter: 112–140 mm, Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for climb-cut spindle from 4 kW to 7.5 kW Screen control for 99 window types; 1 type can contain up to 8 different parts each with 2 end profiles and 2 longitudinal profiles. Production options: individual parts, double parts, by frame, by batch, milling around. Data input via keyboard with integrated operator guidance and fault diagnosis. 1 top-mounted grooving spindle ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Total clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For milling the hardware groove in the end milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Dedpfxew I Ea Dj Ag Nsku Clamping height: 125 mm Tool diameter range: min. 140 mm, max. 180 mm Home position below table level: 10 mm Hardware milling unit, custom version: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 timber thicknesses, incl....

Stanje: zelo dobro (rabljeno), Zeiss probing kit in very good condition Djdpfxeurlqcj Ag Noku

Leto izdelave: 2013, Stanje: rabljeno, NH3 refrigeration plant for cooling glycol and brewing water, consisting of the following components: - NH3 separator for brewing water, 890 l (T0 = -0.5°C) - NH3 separator for glycol, 647 l (T0 = -6°C) - 3 x reciprocating compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water chiller, Q0 = 200 kW Djdpoxbpamefx Ag Njku - Evaporative condenser - Water tank, approx. 47,000 l - Glycol tank, 8,000 l + 2 x glycol pumps - Plate heat exchanger as glycol chiller Q0 = 100 kW - High-pressure receiver, 830 l - Danfoss frequency inverter type VLT HVAC Machine (additional): NH3 refrigeration plant Refrigeration capacity Q0 brewing water: 200 kW Refrigeration capacity Q0 glycol: 100 kW Evaporation temperature t0 brewing water cooling: 0°C Evaporation temperature t0 glycol cooling: -6°C Current: 185 A / 250 A Equipment: 2 x NH3 separators (t0 = -0.5°C; t0 = -6°C); 3 x reciprocating compressors; 2 x brewing water pumps; water chiller Q0 = 200 kW; evaporative condenser; water tank; high-pressure receiver; glycol tank + 2 x glycol pumps; glycol chiller Q0 = 100 kW; Danfoss frequency inverter type VLT HVAC.

Stanje: rabljeno, Pneumaticzny manipulator Pick & Place, jednostka załadowcza typu SCARA robot Urządzenie do obsługi, system manipulacyjny, chwytak do montażu, chwytak załadunkowy do automatyzacji Oś pozioma z cylindrem prowadzącym, moduł liniowy typu CLM 100-H100 (moduł kolumnowy GEMOTEC) Oś pionowa z cylindrem prowadzącym, moduł liniowy typu CLM 100-H50 (moduł kolumnowy GEMOTEC) Djdpjxf Ur Asfx Ag Nsku Udźwig: max. 2 kg Ruch poziomy: 100 mm (pneumatyczny) Ruch pionowy: 50 mm (pneumatyczny) Regulacja pionowa na dwóch kolumnach nośnych: 330 mm (ręcznie, z zaciskiem) Kolumny nośne, prowadnica pionowa: Ø 55 mm Stopa montażowa: 175 x 90 mm - Przesuw pneumatyczny w dwóch osiach z precyzyjnym prowadzeniem liniowym - Amortyzatory krańcowe - Płyta montażowa do mocowania narzędzi 55 x 65 mm Zapotrzebowanie miejsca (dł. x szer. x wys.): 320 x 170 x 550 mm Waga własna: 16 kg Bardzo dobry stan Dostępne różne manipulatory, zobacz nasz sklep internetowy

Stanje: rabljeno, - Power consumption: 26 kVA 3P400V /N/PE/50Hz; protection: 63A - Compressed air connection: min. 5 bar, max. 7 bar Dodpfewpkc Iox Ag Njku - Extraction capacity: min. V = 1,700 m³/h at Δp = -850 Pa, min. 20 m/s, run-on time 15s The system has been cleaned, packed, preserved, and stored by the manufacturer. It is complete and ready for operation. The system can be inspected at any time by prior appointment.

Leto izdelave: 2009, Stanje: rabljeno, NH3 Refrigeration System. The refrigeration system includes the following components: - Compressor 1, GEA Grasso Type OS3 - Compressor 2, GEA Grasso Type OS3 - NH3 Separator - Air-cooled condenser - Heat exchanger for energy recovery with pump - 2 x chilled water pumps - Brewing water pump - 2 water chillers - Expansion tank with control panel for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Machine (Additional information): Refrigerant NH3 Brewing water flow rate: 5 m³/h at 2 bar Djdpsxbn Upefx Ag Nsku Chilled water flow rate: 15 m³/h at 2 bar Refrigerant charge: 85 kg NH3 Compressor displacement: 145 m³/h Capacity: Q0: 2 x 119 kW Operation / Control: Siemens S7 Equipment details: - 2 x compressors: 145 m³/h, 26 kW with frequency converter, 37 kW rated power - NH3 separator mounted on frame, with brewing water chiller and chilled water chiller - Air-cooled condenser on rack 3 x 2.95 kW - Heat exchanger for heat recovery with pump - 2 x chilled water pumps (2.2 kW, 15 m³/h, 2 bar) - Brewing water pump (1.1 kW, 5 m³/h, 2 bar) - Expansion tank, max. permissible operating pressure: High pressure side: 22 bar, Low pressure side: 16 bar