Dvižna Naprava nakup rabljenega (10.408)

Stanje: rabljeno, prevoženi kilometri: 13.894 km, moč: 100 kW (135,96 KM), prva registracija: 06/2023, vrsta goriva: dizel, lastna masa: 3.325 kg, skupna masa: 3.500 kg, velikost pnevmatike: 225/65 R16, konfiguracija osi: 2 osi, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, dvižna višina: 17.000 mm, Oprema: ABS, centralno zaklepanje, klimatska naprava, registracija tovornjaka, zapora diferenciala, žerjav, | Iveco Daily 35S12 | Palfinger dvižna ploščad (2023) | Pogon preko odgonske gredi | Električna okna, električni ogledali | Klimatska naprava | Ročni menjalnik | Euro 6 | Medosna razdalja 4100 mm | Prodaja samo pravnim osebam. Pridržujemo si pravico do napak in predhodne prodaje. Nedpfx Aex Ewxbebbecl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 160 mm, pomik osi Y: 200 mm, pomik po osi Z: 150 mm, skupna masa: 2.200 kg, Odstranjen iz proizvodnje v delujočem stanju, dokumentacija na voljo. Ncodexyyrqspfx Abbel

Leto izdelave: 2026, Stanje: novo, Screening plant for wood chip screening Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on model) Comprising: - Vibrating feeder bunker type AVB - Screening machine type ASM - Subframe / hook lift (optional) - Conveyor belt type MFB - Electrical installation Function and operation: The wood chips are loaded into the vibrating feeder bunker with a wheel loader. They are then fed onto the vibrating screening machine type ASM. The screening machine separates the wood chips into three size fractions (oversize, chips, dust). The discharge of the fractions is handled by conveyor belts. Depending on the model, the screening plant achieves a capacity of 20 to 40 m³/h for wood chips. Advantages: - High screening capacity - High separation precision - Low noise and low maintenance - Flexible application - Custom manufacturing Do you require further information? Njdpfoin Ewlex Abbjcl Contact us! We will be happy to advise you.

Leto izdelave: 2026, Stanje: novo, Screening plant for loading wood pellets, semi-mobile Custom-built Nsdpfx Aoiux Tfjbbjcl Screening capacity: 10 - 50 t/h (depending on configuration) Comprising: - Trough belt conveyor type TFB - Screening machine type ASM - Conveyor belt type MFB incl. magnetic separator - Loading fitting // MODULFLEX loader - Tubular screw conveyor (optional) - Deduster (optional) Functional description and operation: Pellets are fed into the trough belt conveyor (including hopper extension) using a wheel loader. The pellets then pass onto the vibration screening machine type ASM. The screening machine separates the pellets into two size fractions (pellets and dust). The screened pellets are loaded into the silo vehicle via a trough belt conveyor and loading equipment. Thanks to the integrated level sensor in the loading fitting, the unit shuts off automatically when the silo vehicle is sufficiently filled. The dust fractions are discharged by means of a screw conveyor. To minimize dust emissions, the screening unit can be equipped with an additional deduster type NE. The screening plant's capacity (depending on configuration) ranges from 10 to 50 t/h (70 m³/h) for wood pellets. Benefits: - High screening capacity - Precise separation efficiency - Low noise and low maintenance - Flexible application - Customized manufacturing Need more information? Contact us! We will be happy to advise you.

Leto izdelave: 1980, Stanje: dober (rabljeno), Naprava za obračanje posod, varilna obračalna miza, varilna obračalno-nagibna miza - Proizvajalec: Gieseking, varilna obračalno-nagibna miza - Tip: SD 1 - Nosilnost: 1 t - Vrtenje: električno, brezstopenjsko nastavljivo, 0-1 obr/min Nodoyaniljpfx Abbjcl - Čelna plošča: Ø 1010 mm - Troskačna glava: Ø 290 mm, izvrtina Ø 74 mm - Čelna plošča: motorizirano nagibna - Transportne dimenzije: 1750/1170/H1620 mm - Teža: 1392 kg

Stanje: rabljeno, Technical details: Sheet width: 250 mm Sheet thickness: 2 mm Njdeu Ic Ewjpfx Abbscl Number of rollers: 11 Leveling speed: 5...30 m/min Infeed height: 1250 mm Total power requirement: 4.0 kW Machine weight approx.: 620 kg Machine dimensions: 1.15 x 1.02 x 1.5 m Switch cabinet dimensions (LxWxH): 0.66 x 0.53 x 0.32 m STRIP LEVELING LINE WITH FEEDER Features: - Lateral strip guiding rollers Design: - Strip infeed height, horizontal: 1250 mm - Tiltable: positive 30°; negative 15°

Stanje: rabljeno, Technical details: Njdpfx Asu N Aw Njbbjcl Test height: approx. 600 mm Voltage: 220V / 80VA Machine weight approx.: on request kg Machine dimensions approx. (LxWxH): Measuring stand: 0.75 x 0.45 x 1.04 m Dimensions (L x W x H): Measuring probe: 0.32 x 0.51 x 0.23 m Control unit module TPX Baseplate/granite plate with T-slot: Size = L: 650 x W: 450 x H: 80 mm Traverse beam travel Z = 600 mm, via handwheel, swiveling 45° Measuring device, type Perthometer PRK, Size L: 330 x W: 150 x H: 105 mm; Probe head type Perthon RFHTB-250, Y travel = 60 mm automatic/manual, and Z travel = 40 mm via knurled wheel Measuring transducer, type Perthometer, digital display with printer Supplied with accessory box including various probe heads (sample photo)

Stanje: rabljeno, Technical details: Dimensions: 420 x 400 x 400 mm per jaw The following clamping claws are for sale. Dimensions per clamping claw: L: 420 x W: 400 x H: 400 mm Clamping surface 80 x 80 mm, double-sided clamping Clamping stroke approx. 120 mm Nedpfx Asu N E D Sobbecl Clamping width flexible Mounting: -Base area LxW: 420 x 340 mm -Clamping bores: 6 pieces, diameter Ø 40 mm

Stanje: rabljeno, Leto izdelave: 2011, Tehnični podatki: Vlečna sila: 1600 N (vlečna obremenitev: 3000 kg) Krmiljenje: SPS krmiljenje EdmoLift UC-60 Dvižna višina: skupno: 1350 mm Skupna potrebna moč: 1,5 kW Lastna teža: cca. 850 kg Dimenzije DxŠxV: 1,9 x 1,6 x 0,9 m Škarjasto dvižno mizo / dvižna naprava Uporaba: za montažna dela na tirnih vozilih, kmetijskih in/ali gradbenih strojih, kot tudi za dviganje in spuščanje motorjev, za manevriranje samohodna dvižna miza s servisnim dostopom -pogon preko daljinskega upravljanja (2x BlackMax akumulator/baterija na voljo za prodajo) Dvižna miza s podvozjem: Velikost D: 1300 x Š: 800 mm; uporabni hod 820 mm; max. dvižna višina 1070 mm; dvižna sila 175 bar; upravljanje preko ročnega upravljalnika z funkcijo mrtvega moža; Podvozje AL-KO tip AMS1 -daljinsko upravljanje s kablom z vitlom (približno 3 m) Nsdpfex Adbujx Abbjcl -daljinsko upravljanje s kablom za dviganje/spuščanje približno 2,7 m i.D.

Leto izdelave: 2002, Stanje: rabljeno, Technical Specifications: Lifting height: 8080 mm Working height: 10080 mm Load capacity: 450 kg Wheelbase: 1.86 m Njdjva A D Tjpfx Abbecl Travel speed: 35 km/h Lifting speed: 51 sec. Control voltage: 24 V - 250 A V/A Operating pressure: 220 bar Machine weight approx.: 2330 kg Dimensions (LxWxH): 2.65 x 1.20 x 2.3 m Aerial Work Platform – Scissor Lift Table without battery, UVV (accident prevention inspection) not included but can be retrofitted as an option. Mobile hydraulic personnel lift platform Last inspection in accordance with DGUV 308-002 carried out in 06/2023 Load capacity 450 kg, suitable for 3 persons Manual lateral force: 40 daN Platform floor height: 8.14 m Lifting height, retracted including guardrail: 2.26 m Lifting height, platform retracted: 1.14 m Lifting time: 51 sec. Lowering time: 42 sec. Platform dimensions: 2.3 x 1.2 m 4x solid rubber tires Ø 380 x 130 mm, of which 2 are steerable and 2 are driven wheels

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Nedpfeu Nk Ayex Abbocl Lifting height: 1200 mm Load capacity: 230 kg Machine weight approx.: 0.48 t Dimensions (L x W x H): 2.8 x 1.0 x 2.0 m Column lift platform, fabricated from welded profile steel, mobile. - Hydraulically operated - Lifting category 3 - 2 lifting forks, 1650 x 100 x 60 mm, with rubber strip pads; clamping device with screw clamp - Floor height min./max.: 900/1020 mm Chassis with handrail, 2x2 wheels (2 swivel and braked)

Stanje: rabljeno, Technical details: Pipe diameter: see Ø mm Wall thickness: see Ø mm Voltage: 230 V / 1 phase Total power requirement: 0.55 kW Machine weight approx.: 56 kg Dimensions (L x W x H): 0.45 x 0.37 x 0.35 m HYDRAULIC LINE PRE-ASSEMBLY UNIT for EO pipes Nodpfx Asu Icu Ssbbocl Suitable for crimping flare fittings onto hydraulic lines. Compatible with standard pipe materials such as steel (ST 35.4 NBK and/or ST 37.4 NBK and/or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar), and copper. Pressure-controlled operation The machine is equipped with a flaring tool for size Ø 14mm. Operating pressure is variably adjustable.

Stanje: rabljeno, Technical details: Nedpfxju Nk Ame Abbjcl Lifting height: 90-800 mm Load capacity: 500 kg Table length: 1415 mm Table width: 860 mm Total power requirement: 1.1 kW Machine weight approx.: - t Dimensions (L x W x H): 1.45 x 0.9 x 0.9 m Transport dimensions (L x W x H): 1.45 x 0.9 x 0.2 m Operation via control stand with Up/Down and emergency stop (EMERGENCY OFF) Hydraulic system by HAWE, connected via bayonet coupling, flow rate 1.14 l/min at 400 bar pressure

Leto izdelave: 2009, Stanje: rabljeno, Technical details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400 V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions (L x W x H): 0.7 x 0.65 x 1.7 m Induction shrink fit machine with water cooling (30-liter tank, integrated in housing) Application: For ultra-fast tool changes via targeted inductive heating Ncodpfxowp I S Ho Abbsl Cooling medium: Emulsion Suitable for Ø 3–50 mm carbide (HM) and Ø 6–50 mm HSS tools Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel

Stanje: rabljeno, Leto izdelave: 1988, Technical Details: Outreach: 138 mm Sheet thickness: max. 1.12 mm Passage height: 1125 mm Voltage: 380 V Total power requirement: 0.25 kW Machine weight approx.: 0.149 t Dimensions (L x W x H): 0.9 x 0.6 x 1.4 m - Application: Forming beads / flanging Ncodou Icvispfx Abbol - Shaft spacing max./min.: 65 / 52 mm, manually adjustable via handwheel - Currently equipped with bead forming tool Ø 8 mm - Adjustable stop plate: 130 mm Operation via control panel and foot switch The machine is mounted on a steel frame.

Stanje: rabljeno, Technical specifications: Load capacity: 800 t Ncjdev A Uzijpfx Abbsl Total weight: 12.0 / 8.6 t Operating voltage: 380/440 V Dimensions (L x W x H): 6.9 x 1.5 x 1.8 m Dimensions (L x W x H): 5.8 x 1.25 x 1.25 m two support stands, see technical specifications 1x powered support stand with integrated electrical cabinet 1x idler support stand Travel speed continuously adjustable via frequency inverter Right-/left-hand rotation

Stanje: rabljeno, Technical details: Machine weight approx.: upon request kg These clamping devices are sold at a per-kg price when purchased as a complete lot. Please refer to the markings in the photos! Nedpfsu N D N Hsx Abbocl *

Stanje: rabljeno, Technical details: Ncjdpfou N E Azex Abbel Weight: 150 kg Dimensions: L:280 x W:240 x H:180 mm / per clamping claw For sale are these 4x clamping claws (Spannpratzen). Application: Workpiece clamping for turning and drilling operations Cast steel construction Workpiece holding area: Clamping surface WxH: 70 x 65 mm, for internal and external clamping, clamping travel 250 mm Base mounting: Surface L x W: 280 x 240 mm, 4x clamping bolts M24 Includes: 4x T-slot bolts per clamping claw, and socket wrench for 24 mm square

Stanje: rabljeno, Technical details: Speed: 1390 rpm Power: 0.75 kW Machine weight approx.: 360 kg 2 drilling and milling spindles with electrical cabinet. Ncsdju Nk Euepfx Abbjl Sold as is.

Stanje: rabljeno, Technical details: Machine weight approx.: on request kg Ncedpfx Aju N Awvsbbel Machine dimensions approx. LxWxH: on request m Surface Measuring and Recording Device SP6 2x Feed Unit PRK 6720702 1x Measuring Stand PST-Ue (Cross Adjustment = 165mm and Vertical Adjustment = 440mm) Table size 650 x 450mm 1x Measuring Stand PST-Ve (Vertical Adjustment 450mm, motorized) + Manual Control Unit; Table size 650 x 178mm Perthometer S6P and a large/comprehensive selection of probe arms and measuring accessories (comparable, see picture)

Leto izdelave: 2016, Stanje: rabljeno, Technical Details: Wheelbase: 950 mm Load capacity: 25,000 kg Lifting height: 1,310 mm Own weight: 2,100 kg Dimensions (LxWxH): 1.7 x 2.0 x 0.75 m Total power requirement: 11.2 kW WHEELSET CHANGING SYSTEM - WHEELSET PIT Nsdpfxox Ac R Ue Abbjcl Application: Changing of wheelsets and drive axles for railway requirements (locomotives, freight cars, etc.) 2 speed levels forward/reverse 2 speed levels for lifting approx. 60 sec./lowering approx. 110 sec., operation via hand-held controller Lateral shift left/right +/- 20 mm Hoisting category 5 Emergency stop Platform: L: 1,420 x W: 657 mm, usable stroke 1,050 mm Operating pressure for hydraulics = 185 bar Chassis speed = 2-stage minimum 18 mm/sec. Axle spacing: 950 mm Equipment: 10 m connection cable with 380 V

Stanje: rabljeno, prevoženi kilometri: 91.190 km, moč: 92 kW (125,09 KM), prva registracija: 06/1981, vrsta goriva: dizel, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, * Steyr 91.170 4x2 * Dvižna ploščad do 25 metrov * Ročni menjalnik * Popolnoma listnato vzmetenje * FIN: 8910841394 * Tip motorja: 612603313 * kW: 92 * Delovna prostornina: 6595 ccm * Lastna teža: 13.795 kg * Skupna teža: 16.000 kg * Medosna razdalja: 5600 mm * Dolžina vozila: 11.700 mm * Širina vozila: 2.500 mm * Višina vozila: 3.450 mm * Pnevmatske gume: 11 R 22,5 * Obravnavanje po diferencialni obdavčitvi * Vsi podatki brez garancije Ncedpfx Abjkq Ap Eebsl Tel./WhatsApp:

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Stolpna dvižna vrtljiva naprava 500 kg nosilnost Pozicioner Sideros Syncrolift dvojni steber Daljinsko upravljanje (brezžično) Leto izdelave 2024 Nosilnost 500 kg Minimalna delovna višina: 1000 mm Maksimalna delovna višina: 1500 mm Hitrost 1 obr/min Navpično pomikanje 500 mm Nsdpfxjuk Nias Abbscl Premer vpenjalne plošče 500 mm Pogonski motor za vrtenje 0,4 kW Dvižni motor 2 x 0,6 kW Na voljo so različne stolpne dvižne vrtljive naprave: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Zahtevajte ponudbo

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 30.000 kg, Oprema: nožno daljinsko upravljanje, 30 tons load capacity, self-centering, new 380V Ncodpfx Aswrpfgjbbel Hand and foot remote control Rotation speed: 100 – 1000 mm/min Diameter range: 600 – 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant, non-slip PU Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized

Stanje: novo, nosilnost: 10.000 kg, Stolpna dvižna in vrtljiva naprava, nosilnost 10 ton, na voljo kot komplet ali posamezno 2 strani pogona Stroj je na voljo kot sinhroniziran komplet ali posamezno Protec obračalna naprava / pozicioner Syncrolift Dvojni stolp, ročni daljinski upravljalnik brezžični in ročni Nastavitev stolpov – 2x električni pogon Ncjdpfx Ajwtq Dtobbol Nosilnost 10.000 kg, 360° Minimalna delovna višina: 800 mm Maksimalna delovna višina: 1700 mm Hitrost: 0,5 obr/min Premer vpenjalne plošče: 900 mm Vrtenje: 2 x 2,2 kW Vrtljivi moment: 18.950 Nm Stroj je na voljo tudi posamezno kot Mono model (ugodnejše) Po želji z zglobno prirobnico (kardan)