Doppstadt Grizzly With Erjo Chipper nakup rabljenega (76)

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 6.886 h, Funkcionalnost: popolnoma funkcionalen, Base version DW 3060-F "Büffel" (Carrier machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Permissible total weight 25,000 kg Tires: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gearbox 380 kW Auxiliary hydraulic connection 20 l/min Hydraulic preparation for travel drive Fuel tank 2 x 300 liters Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electro-control Reversal of the drum via electric motor when the main engine is off Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Shredding system SIZE "L" 600/4 complete Additional hydraulic connection 70 l/min Radio remote control Comb extension Size "L" Limiter Nwedpfx Abjxx Tfzsiel Mounting for comb extension Limiter Size "L" Overbelt magnet for rear conveyor Frame for overbelt magnet Moistening system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 5.189 h, Funkcionalnost: popolnoma funkcionalen, moč: 390 kW (530,25 KM), leto zadnje generalne obnove: 2026, Equipment: Basic package Inventhor 9: MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard Auxiliary hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank 950 liters Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally arranged slide strips 24-V electrical control Additional electric pump for operating the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb hatch, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding hopper” Complete radio remote control Large lateral GRP service doors Service-friendly engine compartment with LED light Hydraulically reversible fan Loading protection on both sides Fire extinguisher Service ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Additional equipment: 500 mm track undercarriage unit, flat Watering system with hopper extension H=300 mm on both sides Shredding system Size "L" -VARIOMAT (Variomat system L600/4 - 42 teeth) Rear conveyor length 7 m, 1,200 mm wide Size "L" - "Limiter" (20 pieces) LED light package, engine compartment and rear Central lubrication with pump Nwedsyu Snuspfx Abijl Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 10.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 19.000 kg, Model: Doppstadt AK 510 BioPower High-Speed Shredder Year of manufacture: 06/2015 Serial number: 983 Location: North Rhine-Westphalia (NRW) Operating hours: approx. 10,900 h Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on coupling - Tyres 285/65 R 22.5 - Permissible total weight: 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm. Emissions standard Euro Stage III B - Load-dependent feed control including automatic scraper floor reversal - 600-litre fuel tank - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper floor "TwinDrive" - Painted RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good, ready-to-use condition. New diesel engine installed at 10,310 hours! Warranty: The machine is sold in the condition existing at the time of handover. The seller accepts no liability for defects. Nedpfxoy Sam Us Abiswl

Stanje: zelo dobro (rabljeno), MECHANICAL ROLLER SHREDDER DOPPSTADT model: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC POWER UNIT, DISCHARGE CONVEYOR, AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: 7900 mm Total width without walkway: 2950 mm Total height: 5600 mm Loading width: 1900 mm Loading length: 3060 mm Total weight: approx. 30,000 kg Nedpfx Absun Sx Soiswl With engine: 315 kW Rotation speed: 2000 rpm With hydraulic power unit: 7.5 kW Cutting roller dimensions: Length: 3000 mm Rotor diameter: 600 mm Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Tooth width: 60 mm Tooth height: 150 mm Rotor wear protection stripes material: HARDOX 400 Counter-comb: 1 Number of counter-comb teeth: 22 Counter-comb tooth width: 60 mm Effective discharge belt width: 1000 mm Installed power: 5.5 kW

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.304 h, Funkcionalnost: popolnoma funkcionalen, Base Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, approved for road use up to 80 km/h Braking system incl. ABS and lighting compliant with EC Directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection, 20 l/min Load-dependent control of feed material including automatic reversing scraper floor Separate drives for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 litres Feed roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally arranged lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is stopped 24V electrical control system Separate control box at the rear of the machine Hydraulically foldable Multimesh fine shredding basket (mesh size from 30 - 280 mm, gradation available on request) incl. one-piece rear flap Rear conveyor: length 7,500 mm, width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. antimagnetic centre section Underscreen conveyor: length 3,800 mm, width 1,400 mm Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Optional Equipment: Nsdpjxx Tigjfx Abiowl Hydrostatic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: Engine compartment and rear conveyor Watering system Delivery date by arrangement Available from 06/2026

Stanje: rabljeno, Leto izdelave: 2006, * Doppstadt DW 2560 E-1 električni drobilnik / sekalnik * Leto izdelave: 2006 * Na voljo popoln račun za popravilo * Vključen električni razdelilnik Nwodpfx Aeyw Exasbijl * Vključeni podstavki * Teža: 25.000 kg * Več slik in videoposnetkov prek Whatsappa * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 6.701 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 19.000 kg, Doppstadt DW2560 – drobilnik/sekator/rezalnik/mlin/stroj za počasno delovanje • Proizvajalec: Doppstadt • Tip: DW2560 • Letnik: 11/2005 • Magnetni trak • Delovni čas: 6701 ur • Motor: Mercedes Benz OM 442, dizelski motor • Stroj za počasno delovanje • Dolžina valja: 2,5 metra • Premer valja: pribl. 600 mm • Valj: 17 zob • Višina izmeta: 2,9 metra • Pretočna zmogljivost: odvisna od materiala, približno do 30 t/h • Radioupravljalnik • Izmetni trak zadaj • Dolžina za transport: 20 m • Širina za transport: 2,51 m • Višina za transport: 3,95 m Nsdpfszz Sn Tox Abiswl • Skupna teža: 19000 kg • Nemški stroj • Takoj pripravljen za uporabo • Ta ponudba ni zavezujoča. - Pridržana pravica do sprememb in napak. - Nepredvideni napaki in/ali tipkarske napake so možne. - Prodaja v skladu z našimi splošnimi pogoji.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.922 h, Doppstadt Inventhor Type 9 Engine type: Diesel engine Manufacturer: MTU 6R 1300 Emission standard: Stage V / EUROMOT III A Rated power: 390 kW / 530 HP Fuel tank capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt speed: 2.0 m/s Discharge height: 5,050 mm Feed Hopper Loading height: 3,307 mm Nwodpfxexcx Sno Abiel Drum Number of drums: 1 Drum length: 3,000 mm Drum diameter: 600 mm Drum speed: -5 to 32 rpm Number of drum tools: approx. 42 MACHINE DETAILS Total weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport width: 2,500 mm Transport height: 3,893 mm Transport length: 9,973 mm Operating hours: 4,724 h FEATURES - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load from starting torque due to load-free drum positioning - Self-cleaning function for the wrapper - Flexible shredding concept with different package options - New door and housing design for improved maintenance access - Quick conveyor unfolding mechanism at the touch of a button - State-of-the-art monitoring system - Reduced noise emissions Machine is refurbished and immediately available!!!!

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 7.191 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09430219A2D38810, skupna masa: 19.000 kg, Prodajamo našo rabljeno drobilnico Doppstadt (letnik 2010), pri čemer izključujemo kakršno koli garancijo. Stroj je pripravljen za uporabo in ga trenutno uporabljamo v našem podjetju za drobljenje palet za enkratno uporabo ter zelenega odpada. Nwedpszv Hzwofx Abiel

Leto izdelave: 2016, stanje: rabljeno, No. 10010 Doppstadt SM 620 K Trommel Screen Used, year of manufacture 2016 (fully refurbished by manufacturer in 2024) Mobile drum screening machine on tracks Can be used for humus/soil, wood, waste, compost, light construction debris, etc. 7,500 operating hours Tracked undercarriage incl. 2 travel speeds Track width: 500 mm Deutz diesel engine TCD3.6 L4, 90 kW at 1600 rpm (compliant with EUROMOT IIIB/Tier 4i emissions standard) Additional pump drive for connecting further hydraulic consumers Reversible fan at water and oil cooler Complete engine unit swing-out Fuel tank: 300 litres Hopper capacity: 5 m³ Hydraulically folding side conveyor, belt length 5,000 mm, belt width 1,000 mm Hydraulically folding rear conveyor, belt length 5,000 mm, belt width 1,000 mm Emergency stop switches on side and rear conveyors Load-dependent regulated material feed from feed floor to drum Continuously variable drum speed from 0 - 18 rpm Continuously adjustable hopper belt speed from 0 - 0.17 m/s Control panel at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear conveyor / Fold in & out side conveyor / Side conveyor tilt Njdpov Eyqbefx Abiswl Hydraulically folding cleaning brush with individual brush elements and spring tines Centrally arranged lubrication bars 24V electrical control Radio remote control incl. transmitter, receiver, 230V charger, 12/24V charging cable, bracket for transmitter (Following functions can be controlled: Engine stop, engine speed +/-, fold in & out rear conveyor, fold in & out side conveyor, drive & steer the machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning Doppstadt telematic system Paintwork: RAL 2011 deep orange Additional hydraulic connection (40 l/min) at the rear of the machine Magnetic pulley for rear conveyor Flow divider at rear conveyor Internal-spur hopper belt drive Drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5,430 mm / diameter 2,000 mm / thickness 8 mm / perforation 30 mm (offset holes)) Transport dimensions approx. 10,550 x 3,000 x 3,690 mm (LxWxH) Weight approx. 24,000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, transport or installation Errors in description and pricing excepted Dismantling, transport, and loading by us possible as an option To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior arrangement Sale as is Technical data, condition description, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; applies: “bought as seen” Images and videos are sample only and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 5.566 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 25.000 kg, premer rotorja: 600 mm, število rezil: 42, skupna dolžina: 9.630 mm, skupna višina: 3.990 mm, skupna širina: 2.547 mm, dolžina rotorja: 3.000 mm, moč: 360 kW (489,46 KM), število valjev: 6, število valjev: 1, Prodaja se stroj Doppstadt Büffel DW3060. Ta stroj še vedno spada med robustne in nezlomljive stroje Doppstadt. Stanje je rabljeno, vendar dobro in delovno. Lahko ga pokažemo v obratu. Lahko se prevaža po cesti s pomočjo osi in ustreznega vlečnega vozila. Izjemno zmogljiv stroj. Na voljo takoj. Osnovna različica DW 3060-C “Büffel” Osrednja prikolica s 3 osmi, dovoljena hitrost 80 km/h Zavorna naprava, vključno z ABS in osvetlitvijo v skladu z direktivo EU 50 mm vlečna kljuka v skladu s standardom EU, vključno s priključnim čevljem Hidravlično nastavljive oporne noge Zaščita proti brizganju (blatniki znotraj in ob strani) Dovoljena skupna masa 25.000 kg Pnevmatike 385/65 R22,5 Nwjdpfezp H Tyox Abisl Dodatni hidravlični priključki Hidravlična priprava za sistem česalne košare in pogon Rezervoar za gorivo 2 x 300 litrov Dolžina valja 3.000 mm, premer 600 mm Zadnji trak: dolžina traku 5.500 mm, širina traku 1.200 mm, hidravlično zložljiv, z antimagnetnim sredinskim delom Bočni trak: dolžina traku 3.300 mm, širina traku 1.000 mm Osredno nameščene mazalne letev 24-V električni krmilni sistem Reverzija valja s pomočjo električnega motorja ob ustavljenem motorju Samodejno reverzibilni ventilator Podvozje z nastavitvijo nivoja Akustično opozorilo ob zagonu Barva: dvokomponentna barva RAL2011 oranžna Dodatna oprema: Paket BioPower - Moč motorja: 360 kW, z ojačanega planetarnim menjalnikom - Večzobni valj, dolžina: 3.000 mm, premer: 600 mm - Zobi valja 174, oblika C, ojačani (42 kosov) - Sistem česalne košare s fino česalno košaro - Hladilnik menjalniškega olja - Hidravlični pogon - Radijski daljinski upravljalnik NEODYM nadtrak magnet za zadnji trak Okvir za nadtrak magnet Naprava za vlaženje (priprava)

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 10.400 h, Equipment: Basic version DW 3060-F “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system including ABS and lighting according to EC directive 50 mm EC towing eye incl. bolt-on shoe Hydraulically adjustable support leg Splash protection (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, meets EUROMOT IV emissions standard Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: Belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: Belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubricating strips 24 V electrical control Roller reversal with electric motor when engine is stationary Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydraulic drive system Radio remote control Receptacle for comb extension Limiter Size “L” Njdjyu Srmopfx Abiswl Comb extension Size “L” Limiter Moistening device Hopper extension plates, plug-in on both sides Delivery date by arrangement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 3.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 189, moč: 310 kW (421,48 KM), kapaciteta rezervoarja za gorivo: 500 l, TECHNICAL DETAILS Cutting roller with teeth: 30 Areas of application: waste / wood / green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank volume: 500 l Electrical system: 24 V Hydraulic connections: 35–80 l/min Permissible total weight: 27,000 kg Load capacity protection: three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder roller with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Full remote control Large service doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service steps Acoustic start-up warning Nsdpoym U E Hjfx Abiowl Doppstadt telematics system Special shredder system, size L 600/4 – 30 Z Additional hydraulic connections Hydraulic drive Return conveyor belt Frame with overband magnet Magnet and combs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 7.000 mm, hitrost transportnega traku: 50 mm/s, širina transportnega traku: 1.000 mm, širina odprtine za polnjenje: 3.374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding System Type: Size L Number of rotor teeth: 20 Feed Hopper Loading height: 3,650 mm Feed width: 3,374 mm Discharge Conveyor (Rear Belt) Belt width: 1,000 mm Belt length: 7,000 mm Discharge height: 4,209 mm Conveying speed: 1.25 – 3.0 m MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Make: MTU 6R1000 Rated power: 260 kW (353 HP) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Basic package Inventhor Type 6 Njdpfx Aboxln Rlsiewl Load-sensing system Longitudinal conveyor (belt length: 2,900 mm, belt width: 800 mm) Centrally arranged lubrication strips 24-V electrical control system Full remote control Large side fiberglass maintenance doors Service-friendly engine compartment LED lighting package engine compartment and rear Hydraulically reversible radiator fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, dual-sided watering Overbelt magnet Neodymium Frame for overbelt magnet 7 m

Leto izdelave: 2025, stanje: novo, Special drum, segment drum (fitted drums) suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T5-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, and others. - Manufactured according to your specifications: - Segments with perforations from 2 mm possible - Easy change of screening segments - Various segments within a single drum possible Nwjdpfjwava Hox Abiol - Smallest webs - Hardox segments - Stainless steel - Welded-in spiral flights - Available in various wire gauges - Short delivery times Many screening drums in stock

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 217, kapaciteta rezervoarja za gorivo: 500 l, hitrost transportnega traku: 3.000 mm/s, širina odprtine za polnjenje: 3.374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of roller teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s Longitudinal conveyor length: 2,900 mm Longitudinal conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar chassis unit Drive Engine type: Diesel-hydraulic Make: MTU 6R1000 Rated power: 260 kW (353 HP) Emission standard: STAGE V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Nwjdpfeyg Iraex Abiol Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic package Inventhor Type 6 Load-sensing system Centrally arranged lubrication strips 24-V electric control system – additional electric pump for operating the following functions when engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible fan All-round feed protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt Telematic system Shredding system Size L – 20 teeth Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic travel drive Hopper extension 350 mm, dual-sided watering system 7 m rear discharge conveyor Overband magnet neodymium Frame for 7 m overband magnet

Leto izdelave: 2025, stanje: novo, Special drum, segment drum (screened drums), suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T5-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55 and others. Cfhql02lmx - Manufactured according to your specifications: - Segments with perforations from 2 mm possible - Easy replacement of screen segments - Multiple segment types within one drum possible - Minimal web widths - Hardox segments - Welded-in spirals - Available in various wire thicknesses - Short delivery times Nwodjvnl Tyjpfx Abiel Many screen drums in stock

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.703 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Bau Nummer 443, skupna masa: 30.000 kg, skupna širina: 2.500 mm, transportna širina: 2.500 mm, leto zadnje generalne obnove: 2025, Ponujamo ta obnovljen enogredni drobilnik Doppstadt DW-3060 K, letnik 2019. Telematika aktivna do 06/2028 Vsi ležaji in vsi transportni trakovi novi, originalni Doppstadt Vsi obrabni deli novi, originalni Doppstadt Nwedpfx Abszhlpwsijl Proizvajalec: Doppstadt Model: DW-3060 K Letnik: 2019 Stanje: obnovljeno ID kategorije: 2097 ID tipa: 2590 Tip stroja: enogredni drobilnik Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 506 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 42, dolžina transportnega traku: 6.900 mm, hitrost transportnega traku: 4.000 mm/s, širina transportnega traku: 1.000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 - 4 m/s Njdpfjxrn Hgsx Abiswl MACHINE DETAILS Chassis: Crawler track undercarriage Operating dimensions (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Tank capacity: 300 l EQUIPMENT Basic package Methor Track Crawler undercarriage incl. 2 travel speeds Track width: 400 mm, triple bar Auxiliary hydraulic connection 70 l/min 24-V electric control system Large wireless remote control, complete Service-friendly engine compartment with LED lighting Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overband magnet Overband magnet Quick-change system for roller Quick-change system for machine Additional electric pump for operation when engine is shut down

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 4.947 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1381, skupna masa: 18.920 kg, leto zadnje generalne obnove: 2026, Ponujamo hitro drobilnico Doppstadt AK 560 ECO Power, ki jo je prodajalec popolnoma obnovil, prvo v uporabi leta 2020. Zadnji transportni trak 6 m. Brušilna komora obnovljena, nov rotor. Nova kladiva. Novi dno in strop. Opremljen z dvema rešetkama. Popoln servis motorja. Nov flector. Tehnični pregled aktualen. Seznam oprav na zahtevo. Nedpoy Tbcgefx Abijwl Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 2026, stanje: novo, DRUM SCREENS – TOP EUROPEAN QUALITY | FOR ALL COMMON SCREENING MACHINES We offer high-grade drum screens with premium European quality – precisely fitting for numerous machine models: Compatible with, among others: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725 Terra Select T4 – T7 Komptech Maxx, Mustang, Nemus, Cribus Pronar, Terex, Neuenhauser, and many more Technical Specifications - Custom manufacturing to your requirements - Perforation: round or square holes - Arrangement: straight or staggered - Minimum web widths for maximum screening efficiency - Integrated spirals for optimal material flow - Various material thicknesses available - High-grade, sharp-edged perforated sheets made from special steel Your Advantages Nodey Dpgujpfx Abiowl ✔ Top quality from European production ✔ Many models available from stock ✔ Fast delivery throughout Germany (EU-wide upon request) ✔ Short lead times ✔ Attractive and fair pricing Request your individual offer now! Our expert team will be happy to assist you quickly and professionally. Many models available from stock Delivery within Germany (EU-wide on request) Short lead times and fair prices Contact us for your tailored offer!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, skupna masa: 30.000 kg, Doppstadt DW 3060K Biopower, tip F M, gred - Letnik izdelave 2018 - Motor MTU R61300 s 490 KM - AD BLUE - Teža 30.000 kg - Daljinski upravljalnik - Sistem za vlaženje - Zadnji transportni trak 7 m - Magnet za nad transportnim trakom - Goseničasto podvozje - Centralno mazanje - Omejevalnik - Valj M 3000 mm x 800 mm - Število zob 124 Stroj je v originalnem stanju, ni bil barvan, samo je bil obnovljen v delavnici. Njdpfx Abjzx Rz Tjiowl

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 2.048 h, Funkcionalnost: popolnoma funkcionalen, moč: 310 kW (421,48 KM), leto zadnje generalne obnove: 2026, Oprema: Osnovni paket Inventhor 6: Sistem za zaznavanje obremenitve Rezervoar za gorivo 500 litrov Dolgi transportni trak: dolžina 2.900 mm, širina 800 mm centralno nameščene mazalne letve 24-V električni nadzor – dodatna električna črpalka za upravljanje naslednjih funkcij pri izklopljenem motorju: dvig/spuščanje/nagib zadnjega traku, odpiranje/zapiranje zgornjega pokrova, odpiranje/zapiranje zgornje plošče, dvig/spuščanje snemljivega lijaka brezžični daljinski upravljalnik, kompleten velika stranska vrata iz steklenih vlaken za vzdrževanje motorju enostopen dostop za vzdrževanje LED-paket luči: motorni prostor in zadnji del hidravlično obvratno vrteče se krilno kolo trostranska zaščita za nakladanje snemljivi lijak protipožarni aparat lestev za vzdrževanje orodjarna akustični opozorilni signal ob zagonu telematični sistem Doppstadt barva: RAL2011, temno oranžna Dodatna oprema: Pogonski sklop 310 kW – EV 400-mm verižni pogon sistem za drobljenje Size L nadaljšek lijaka 350 mm, namakalni sistem na levi strani zadnji transportni trak 4,9 m magnet nad transportnim trakom, neodim okvir za magnet nad transportnim trakom Nwjdpfx Abszqrr Deisl * Sistem DoppBasket je na voljo kot dodatna oprema! * Datum dostave se določi po dogovoru.

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 4.689 h, Funkcionalnost: popolnoma funkcionalen, Oprema: Osnovni paket Inventhor 9: MTU dizelski motor 6R1300, 390 kW pri 1.700 vrt/min, v skladu z emisijskim standardom EUROMOT V Dodatni hidravlični priključek 30 l/min in 70 l/min Pogon valja preko planetnega gonila 380 kW – VARIO – Load-Sensing sistem Rezervoar za gorivo 950 litrov Vzdolžni transporter: dolžina 4.450 mm, širina 1.000 mm Centralno nameščene mazalne letve 24-V elektronsko krmiljenje dodatna električna črpalka za upravljanje naslednjih funkcij pri mirovanju motorja: “dviganje/spuščanje/zgibanje zadnjega transporterja, odpiranje/zapiranje grebenske lopute, odpiranje/zapiranje grebena, dviganje/spuščanje opcijskega trajnega magnetnega traku, dviganje/spuščanje opcijskega zložljivega lijaka” Komplet daljinsko radijsko upravljanje Velika stranska GFK-servisna vrata Vzdrževanju prijazen motornik prostor z LED-svetilko Hidravlično reverzibilen ventilator Dvostranska zaščita pri nakladanju Gasilni aparat Servisna lestev Orodjarna Akustično opozarjanje pri zagonu Nsdpfsyu Svxox Abijwl Doppstadt telematični sistem Barva: RAL2011, globoko oranžna Dodatna oprema: Trioosna polpriklopni podvozna enota Sistem drobljenja Size "L-C3"-VARIOMAT Size "L" – "Limiter" (20 kosov) Hidravlični pogon za vožnjo Obojestransko zalivanje Zadnji transporter 8,5 m, širina 1.200 mm Nadtransportni neodimski magnet Okvir za nadtransportni neodimski magnet Centralno mazanje s črpalko LED svetlobni paket motorni prostor in zadnji del Opomba: Vgrajen je nov valj! Datum dobave po dogovoru.

Leto izdelave: 2014, stanje: rabljeno, No. 10018 Mobile 2-Fraction Spiral Shaft Screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of manufacture 2014 Approx. 3,000 operating hours Includes mobile deck 0/120 Screening of materials that are difficult to sieve, such as commercial waste, bulky waste, mixed construction waste, metal scrap, slag, waste wood, organic waste, landfill remediation in 2 fractions. Nwjdjwhza Uepfx Abijl - Drive: Generator type 50 kVA / Voltage 400/230 V / Frequency 50 Hz / Speed 1,500 rpm / Fuel tank capacity 250 liters / Fuel type Diesel - Feed hopper: Length 2,700 mm / Width 2,100 mm / Loading volume 3 m³ - SPLITTER screening deck / spiral shaft deck AA 254: Length 6,000 mm / Width 2,500 mm / Drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / cut size 0–80/120 mm - Feed conveyor FH: Length 3,000 mm / Width 1,200 mm / Drive 1 x 4.0 kW with frequency converter control / Angled design, incl. hopper for transfer from the discharge conveyor at the shredder / Belt type Chevron - Fines longitudinal collection belt FC: Length 5,600 mm / Width 1,200 mm / Drive 1 x 3.0 kW / Permanent magnet separation / Belt quality Chevron 16 mm - Fines transverse collection belt FC: Length 1,600 mm / Width 1,000 mm / Drive 1 x 3.0 kW / Belt quality Chevron 16 mm - Mobile fines discharge belt: Length 4,460 mm / Width 1,000 mm / Drive 1 x 4.0 kW / Expandable for FE fraction / Belt quality Chevron 16 mm - Oversize collection belt FC: Length 5,300 mm / Width 1,200 mm / Drive 1 x 3.0 kW / Belt quality Chevron 16 mm - Mobile oversize discharge belt: Length 7,350 mm / Width 1,700 mm / Drive 1 x 5.5 kW / Expandable for FE fraction / Discharge height 5,000 mm - Control cabinet: Complete electrical control via PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 color touch panel / Radio remote control with color display for all driving and working functions - Mobility: Electric crawler undercarriage with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (material dependent) Transport dimensions approx. 13,600 x 3,000 x 3,100 mm (L x W x H) Weight approx. 21,000 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport or installation. Errors in description and price excepted. Dismantling, transport, and loading by us available as an option. To avoid possible misunderstandings, a site inspection is possible and recommended by appointment Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Pictures and videos are for example purposes and do not represent the actual scope of supply Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location