Dnc nakup rabljenega (149)

Stanje: rabljeno, Pressure: 125 t Bending length: 3550 mm Itjdpfekpwubex Ah Don Distance between uprights: 3050 mm Stroke: 250 mm Table width: 120 mm Table height: 900 mm Throat depth: 320 mm Return speed: 100 mm/sec Working speed: 10 mm/sec Control: Cybelec DNC 70 Oil capacity: approx. 250 l Total power requirement: 11 kW Machine weight: approx. 11 t Space requirement: approx. 4 x 2 x 3 m * New control system: Cybelec CypTouch 12 – 3 axes * Hydraulic tool clamping * Crowning system * Swivelling operator panel, front right * Mobile foot switch * Side safety guard (protective grid) * Rear safety guard (protective grid)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, model krmilnika: CYBELEC DNC 880S, delovna širina: 3.050 mm, stiskalna sila: 135 t, TECHNICAL DETAILS Pressing force: 135 t Bending length: 3050 mm Control unit: CYBELEC DNC 880S Controlled axes: Y1, Y2, X, R MACHINE DETAILS Dimensions (L x W x H): 4800 x 2400 x 2800 mm Itjdpfx Ahsv Unz Hj Don Machine weight: approx. 7500 kg EQUIPMENT - 1 set of upper and lower tools - AMADA tool holder - Crowning - 2x support arms - Foot switch - 2x side safety doors - Lasersafe system - 4x manually adjustable backgauge fingers

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, obratovalne ure: 290 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F1F 161101, potovalna razdalja osi X: 190 mm, pomik osi Y: 140 mm, pomik po osi Z: 260 mm, največja hitrost vretena: 3.500 obr/min, širina mize: 125 mm, dolžina mize: 420 mm, največja hitrost vrtenja: 14.000 obr/min, Milling machine including engraving spindle device and 4th axis, as well as automation-ready configuration! The machine was used for training purposes only and has approximately 290 spindle hours. TECHNICAL DETAILS Travel X-axis: 190 mm Travel Y-axis: 140 mm Travel Z-axis: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling Table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots to DIN 650: 2 pieces, 11 mm T-slot spacing: 90 mm Milling Spindle Drive Three-phase asynchronous motor output: 0.75 kW Speed range (steplessly adjustable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle device speed: 14,000 rpm Tool Changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with / without changer: Ø 40 / 60 mm Feed Drive Itedsv Ip Izjpfx Ah Den High precision due to 3-phase stepper motors: 0.5 µm Feed rate and rapid traverse: 0 - 2 m/min Average position scatter: 0.008 mm MACHINE DETAILS Installation footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight incl. tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D-View simulation software - 8-position tool changer with pick-up system and air blast cleaning - Electronic handwheel - Swiveling table with keyboard drawer - Pneumatic vice, 72 mm - 4th axis with three-jaw chuck - Engraving spindle device (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and clamping nut - Pneumatically operated automatic door and clamping devices - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, instruction manual with spare parts list

Stanje: novo, ELMAG HGS-A 3100x6mm Hydraulic Guillotine Shear Versatile Application The hydraulically powered HGS-A swing-beam shears deliver robust cutting performance for all sheet thicknesses up to 6.0 mm or 8.0 mm. Their ultra-hard, precision-ground high-grade steel blades always produce a clean, straight cut. Key Benefits of Swing-Beam Technology: - High cut quality - Long-term machine accuracy - Extended blade service life - Long intervals between regrinding Standard Features - Upper and lower blades suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE-conforming safety features - Support arm with ruler and side stops - Support table with ball transfer rolls - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile control station with foot pedal and emergency stop - Operating manual / CE documentation Optional Equipment - Angle gauge with scale - Sheet support device type I or type II - Support arm length up to three meters, with ruler - Laser cutting line indicator - Light curtain finger guard - CNC HGS-A with CYBELEC DNC 61 G control ADVANTAGES High quality standards Robust industrial models manufactured with the latest technology High cutting accuracy Welded, extremely stable, stress-relieved monoblock steel frame with excellent vibration damping S275-grade material for high tensile strength Premium BOSCH-REXROTH or HOERBIGER hydraulic system Low-noise ATOS hydraulic pumps with high-pressure capability Powerful, honed and chrome-plated hydraulic cylinders Upper blade with two cutting edges, special steel hardened Lower blade with four cutting edges, special steel hardened Central blade gap adjustment for quality cuts on various material types and thicknesses NC-controlled, motor-precision adjustable backgauge with ball screw spindle High adjustment speed of 110 mm/s, range 1,000 mm Backgauge with automatic reset Cutting line illumination Automatic hold-down system with high clamping force for secure material support and anti-tilt during cutting CE-compliant safety devices Built-in safety via blade gap guard Light barrier at the rear of the machine Emergency stop buttons on both the machine and the control station TECHNICAL DATA Cutting length: 3100 mm Cutting capacity at 42 kg/mm²: 6 mm Cutting capacity at 70 kg/mm²: 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 20 Hold-downs: 14 units Hold-down force: 12 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Iedpfxjt Egb No Ah Djtn Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 3400 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank volume: 150 l Length: 4000 mm Width: 3010 mm Height: 1640 mm Weight: 5500 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, specifikacija 150 TON 4-OSNA CNC HIDRAVLIČNA PRIGANJALNA UPORABNA GIBNA STISKALNICA, DOLŽINA UPORABE 4000 mm POPOLNO OPREMLJENA Z VSEMI ZGORNJIMI IN SPODNJIMI ORODJI, VKLJUČNO S SPODNJIM MULTI-VEJ BLOKOM Itjdpfxjh N Dqrs Ah Den opis TIP: HIDRAVLIČNA PRIGANJALNA UPORABNA DOLŽINA: 4000 mm PRITISK GIBANJA: 150 TON KRMILJE: CYBELEC DNC 60 ŠTEVILO OSI: 4 KONFIGURACIJA OSI: X1, Y1, R MAKSIMALNA HITROST: 80 mm/sek. HOD: 180 mm ZAŠČITE: STROJU PRITRJENE ELEKTRONSKE ZAŠČITE STRANSKA IN ZADNJA OMEJITVENA OGRADA Z VARNOSTNIM ZAKLEPANJEM TEŽA: 11.200 kg SER. ŠT.: 6150/11324 MOČ MOTORJA: 7,5 kW LETO IZDELAVE: 2004

Stanje: rabljeno, Technical details: Pressing force: 315 t Bending length: 5050 mm Distance between uprights: 4100 mm Throat depth: 500 mm Stroke: 250 mm (ram) Control: DNC 884s Machine weight approx.: 27.0 t Machine dimensions LxWxH: 5.7 x 2.2 x 4.0 m The machine is installed approx. 0.95 m below floor level. Application: coining (bottoming) and air bending Operation modes via the DNC control system: manual, semi-automatic and automatic Maximum distance between table and upper beam: 490 mm Table: with extension approx. 800 mm, tool holder at the table = 30 mm dovetail Accessories: Numerous dies and punches, as shown in the photo Itodpeu Iccpsfx Ah Dsn in stock.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, delovna širina: 3.050 mm, hod: 300 mm, razdalja med stojali: 2.550 mm, stiskalna sila: 125 t, PRESS FORCE: 125 tons BENDING LENGTH: 3050 mm CLEAR DISTANCE BETWEEN FRAMES: 2550 mm RAM STROKE: 300 mm CONTROL: DNC 900 Cybelec SAFETY AOPD: on request BACKGAUGE: 4 axes, motorized (X, R, Z1-Z2) BACKGAUGE FINGERS: 2x with support FRONT SHEET SUPPORT: 2x FRONT BENDING AID: on request TOOL CLAMPING: Top/bottom hydraulic TOOL HOLDERS: Type Weinbrenner CROWNING: Hydraulic, automatic calculation SLIDING DIE: 4 positions (hemming and bending without retooling) YEAR OF MANUFACTURE: 1998 BENDING TOOL: 1 set, used Iedpfx Aovf Hvdoh Dotn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, stiskalna sila: 225 t, delovna dolžina: 6.050 mm, TECHNICAL DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2 Press force: 225 t Bending length: 6,050 mm Control unit: CYBELEC DNC 1200 PS Dimensions: 6,050 x 2,150 x 3,167 mm Total power requirement: 18.5 kW EQUIPMENT - 2 bending aids in front of the machine - 2 support arms in front of the machine - Pneumatic top tool clamping - Crowning, die shifting - Foot switch Itedpfxjvuq Nae Ah Djn Tool holders: - Top: 26 mm EHT - Bottom: 55 mm EHT Please note: This machine is a pit-mounted model.

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 200 t Bending length: 3000 mm Frame gap: 2560 mm Installation height: 450 mm Throat depth: 450 mm Stroke adjustment: 240 mm Horn length over frame outside edge: 175 mm each Table length: 3050 mm Table width: 280 mm Table height above floor: 820 mm Electrical specification - Voltage/Frequency: 220/50 V/Hz Control: CYBELEC, DNC60 Stroke: 250 mm Operating pressure: 150 bar Machine weight approx.: 15 t Space requirements approx.: L: 4.0 x W: 3.2 x H: 3.44 m Hydraulic press brake, new control in 2005 - CYBELEC DNC 60, lower beam goes 500 mm into the floor, Isdpfx Ahot Hllps Dstn machine constructed with double-T-beams, prism and upper beam in 3000 mm length,

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: CYBELEC, model krmilnika: DNC 800, delovna širina: 3.050 mm, hod: 220 mm, globina grla: 410 mm, razdalja med stojali: 2.610 mm, število osi: 8, tip kronanja: CNC krmiljen, nastavitev zadnjega prislona: CNC krmiljen, skupna masa: 10.500 kg, skupna dolžina: 4.200 mm, skupna širina: 2.400 mm, skupna višina: 2.500 mm, moč: 9 kW (12,24 KM), stiskalna sila: 125 t, Oprema: CE označba, dokumentacija / priročnik, spodnje orodje, zgornje orodje, Hydraulische Abkantpresse CNC-Steuerung CYBELEC DNC 800 CNC-Achsen: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulische Stempelspannung Segmentiertes Werkzeug Maschine für die Aufstellung ohne Fundament Technische Daten: Biegelänge: 3050 mm Itedpfxjwrx Tme Ah Den Presskraft: 125 t Ausladung: 400 mm Ständerabstand: 2610 mm Hub des Oberbalkens: 220 mm Maschinenabmessungen (L x B x H): 4200 x 2400 x 2500 mm Gewicht: 10.500 kg Baujahr: 2001 Hauptmotorleistung: 9 kW

Stanje: rabljeno, delovna širina: 3.500 mm, Hydraulic Press Brake Manufacturer: HARTMANN, Model: AKP 30-35C Year of manufacture: 1994 Technical Specifications Manufacturer: Hartmann Model: AKP 30-35C Year: 1994 Pressing force: 300 t Working length: 3500 mm Overrun (ram travel after stop): 4 mm Overrun time: 40 ms Safety distance: 64 mm Connected load: 30 kW Equipment • CYBELEC DNC 70 CNC control All details are supplied without guarantee. A powered demonstration is possible by appointment. Isdewucgispfx Ah Dotn Hartmann is a German company (Frankfurt region). Today, Hartmann specialises in the repair and service of sheet metal processing machines.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, premer žaginega lista: 305 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, skupna dolžina: 3.100 mm, skupna širina: 3.100 mm, skupna masa: 3.000 kg, moč: 7 kW (9,52 KM), zahteva za prostor dolžina: 3.100 mm, potrebna širina: 3.100 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a powerful, electronically controlled panel dividing saw designed for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months Isdpowrn Efsfx Ah Dstn CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Equipment: - Longitudinal cutting saw FM 20-3100 with hardened guides - Automatic forward and return movement of the saw unit (automatic lowering on return) - Feed drive via three-phase gear motor with frequency inverter control - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Safety hood locking with louver curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm - Main saw motor: 7.0 kW | Scoring saw motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angular pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed phenolic (Pertinax) surface in the angular fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial ports - Network capable (LAN/WLAN), remote servicing via Internet (TeamViewer, Remote Desktop) - USB print function - Multilingual dialog programming - 15" flat screen, multifunction keyboard at swiveling control panel - Graphical display of cutting plans and workflows Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angular fence table HP 5085: 1,720 x 800 mm | Phenolic top - Workpiece support table HP 5025: 1,720 x 800 mm | Phenolic top - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is in use worldwide — even under extreme conditions. Whether in Africa’s dry climate or the high humidity of Southeast Asia (e.g., Thailand), the PA 4136 delivers reliable operation in 3-shift systems — 365 days a year — and impresses with exceptional stability and durability. Guarantee: We are so convinced of the quality and durability of our machines that we offer a 7-year warranty on the machine structure and guideways. (Excludes electrical supplier parts and wear parts.) 📞 Contact us for an individual quotation or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, delovna širina: 2.050 mm, hod: 324 mm, stiskalna sila: 63 t, PRESS FORCE: 63 tons BENDING LENGTH: 2050 mm CLEAR STANCHION WIDTH: 1550 mm Itjdpfx Ahovf Hk Is Den RAM STROKE: 240 mm CONTROL SYSTEM: ModEva PAC Cybelec SAFETY AOPD: on request BACKGAUGE: 5 axes, motorized (X1-X2, Z1-Z2, R) BACKGAUGE FINGERS: 2x with support FRONT SHEET SUPPORT: 2x FRONT BENDING AID: on request TOOL CLAMPING: hydraulic, upper/lower TOOL HOLDER: Weinbrenner type CROWNING: on request SLIDING DIE: on request YEAR OF MANUFACTURE: 1995 BENDING TOOL: 1 set, used

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, hod: 665 mm, potovalna razdalja osi X: 700 mm, pomik po osi Z: 2.900 mm, stiskalna sila: 800 t, dolžina obravnalne ograje: 8.200 mm, pomik osi R: 250 mm, TECHNICAL DETAILS Pressure: 2 x 400 t Bending length: 2 x 4100 mm X-axis travel: 700 mm R-axis travel: 250 mm Z-axis travel: 2900 mm Stroke: 665 mm Throat depth: 400 mm Installation height: 850 mm Distance between uprights: 3600 mm MACHINE DETAILS Total power: 30 kW Weight: 76,000 kg Equipment/Accessories: - Operator terminal with 15" TFT-LCD flat screen, network card, Windows XP and MMC-Bybend software - Tilt adapter and double-jointed arm for control panel - Press force reference for automatic deflection compensation of side frames - Dynamic hydraulic crowning of the lower beam, DNC-controlled - Automatic dynamic press force control - Sheet thickness measurement - Tool overload protection - Temperature monitoring - Stainless steel scale on the upper beam - AKAS laser system, height manually adjustable - Electrically monitored side safety guards - Rear safety guard with sliding door - Integrated hour and stroke counter - Linear guide on lower beam with 2 carriages, each 250 mm - Double guidance for the upper beam - 2 x manually adjustable front support arms made of steel, length 1000 mm - Slim table T5, height 145 mm - Punch holder type "R" mechanical - 2-axis back gauge with X and R - Tilt adapter for operator terminal Ijdpfx Asvi I Ntoh Dstn

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, premer struženja: 550 mm, moč vretenovega motorja: 22.000 W, hitrost vretena (min.): 3.800 obr/min, izvrtina vretena: 80 mm, moč: 22 kW (29,91 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Okuma Macturn 350 2SW-1500 Big Bore Main Spindle, CNC Turning-Milling Center Manufacturer: Okuma Model: MacTurn 350 2SW1500 BigBore Year of manufacture: 2008 / 2009 Control: OSP P 200 L IGF One Touch Advanced + CAS Spindle operating hours: 6437 h Technical Specifications - Max. turning diameter: 550 mm - Max. turning length: 1,500 mm Travel, upper turret (milling spindle): - X-axis: 505 mm/190 mm/1670 mm - Y-axis: 190 mm (+95 / -95 mm) - Z-axis: 1670 mm - W-axis: 1680 mm Iodpfxevta Rds Ah Dstn Travel, lower turret: X/Z 210 mm / 1670 mm Main spindle “Big Bore” version - Main spindle motor: 22 kW, 412 Nm - Max. spindle speed: 3,800 rpm - Spindle nose: JIS A2-8 - Spindle bore: 80 mm - Max. bar diameter: 71 mm - C-axis: 0.001° Sub spindle “Super Big Bore” version - Sub spindle motor: 22 kW, 412 Nm - Max. spindle speed: 3,300 rpm - Spindle nose: JIS A2-8 - Spindle bore: 80 mm - Max. bar diameter: 71 mm Milling spindle - Milling spindle motor: 11 kW - Max. milling spindle speed: 12,000 rpm - Tool holder: HSK 63 - B-axis: 0.001° - Tool magazine: 44 stations Lower turret - Tool positions: 12 - Tool holder: VDI-40 - Powered tool stations: 12 positions - Max. power of driven tools: 7.5 kW - Max. speed of driven tools: 4,500 rpm Machine weight: approx. 15,000 kg Space requirement: 6,000 x 3,500 x 3,000 cm Additional equipment: - High-pressure coolant 40 bar - Chip conveyor Interlit ISF 614 - Heavy-duty crane filter Interlit SBP 4 - Touch setter - Helical Cutting - 4 extra M-code set - 2x hydraulic power chucks SMW BH-D 315-95, diameter 250 mm - DNC-T1 interface - RS 232 C interface - Air blow function for main and sub spindle - TAS-S + TAC-C Condition Report after Commissioning in Bergisch Gladbach Geometry Measurement Results - Backlash, XA-axis: 0.015 mm - Backlash, XB-axis: 0.015 mm - Backlash, ZA-axis: 0.020 mm - Backlash, ZB-axis: 0.020 mm - Backlash, Y-axis: 0.010 mm - XA-axis measured with test mandrel over 300 mm: 0.02, YA over 300 mm: 0.007 in T1, T2, T3 - B-axis: alignment and function good - M-drive lower turret: tested and good - Milling spindle: tested up to 6,000 rpm, no findings - Main/sub spindle: tested, no findings - High-pressure pump: working properly, no abnormalities Accessories: - 2 x hydraulic crane power chucks SMW - Pallet with 16 driven tool holders, 10 HSK 63 adapters, 3 VDI 40 adapters - Front lifting hook - All original axis locks Neff – The Okuma Specialist and NeffBuy We are also happy to provide a complete worry-free package, including inspection in our showroom with demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as training and subsequent service. We provide Okuma CNC service across Europe, both electronic and mechanical, and on top we have a warehouse of 1,200 m² of all Okuma spare parts – for more information, please visit our website.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3050 x 110 Tonnen 3 Achsen CNC-Steuerung CYBELEC DNC 880 S Abstand zwischen den Ständern: 2.550 mm Hub: 130 mm Maximaler Abstand Tisch-Abstreifer: 310 mm Tischbreite: 180 mm Iodpfxsvrw Iko Ah Dstn Motorleistung: 14 kW Ober- und Unterwerkzeug neu. Abmessungen: 3.500 x 2.100 x 2.500 mm Gewicht: ca. 7.500 kg

Stanje: rabljeno, Leto izdelave: 2011, 2011 Mazak Quick Turn Nexus 250-II M v izjemnem stanju z upravljalnikom Mazak Matrix Nexus, 12-pozicijsko revolversko glavo, pogonskimi orodji, transportnim trakom za odrezke, visokotlačnim hladilnim sistemom, avtomatskim nastavljalcem orodij in izmetnikom obdelovancev. Specifikacije stroja: UPRAVLJANJE - Mazak Matrix Nexus Control - 15'' barvni LCD zaslon na dotik - Mazatrol pogovorno programiranje (podpora tudi G-kodi) - Povezljivost: Ethernet, USB, FTP, DNC KAPACITETE - Velikost vpenjalne glave (glavno vreteno): 10'' - Največji premer struženja: 610 mm - Največji premer obdelave: 350 mm - Največja dolžina struženja (ležaj 1000 mm): 1.025 mm - Največja dolžina struženja (ležaj 500 mm): 515 mm - Največji premer palice (glavno vreteno, odvisno od vpenjalnega sistema): 76 mm GLAVNO VRETENO Ijdpfx Asvt Ehzeh Detn - Največje število vrtljajev: 4.000 min⁻¹ - Moč motorja (30-minutna nominalna vrednost): 26,0 kW REVOLVERSKA GLAVA - Število orodij: 12 - Moč motorja pogonskih orodij (10-minutna nominalna vrednost): 5,5 kW OSI PODAJA - Hodi (os X): 190 mm (ležaj 500 mm) / 225 mm (ležaj 1000 mm) - Hodi (os Z): 515 mm (ležaj 500 mm) / 1.025 mm (ležaj 1000 mm) / 1.535 mm (ležaj 1500 mm) - Hitrost hitrega pomika (os X): 30 m/min - Hitrost hitrega pomika (os Z): 30 m/min DODATNA OPREMA - Transportni trak za odrezke (opcija) - Visokotlačni hladilni sistem (opcija) - Avtomatski nastavljalec orodij (opcija) - Izmetnik obdelovancev (opcija) DIMENZIJE STROJA - Mere stroja (D x Š x V): 2.475 mm x 1.780 mm (ležaj 500 mm) / 4.382 mm x 2.095 mm (ležaj 1500 mm) - Teža stroja: cca 7.500 kg - Skupna priključna moč: cca 20 kVA Upravljanje: Mazak Matrix Nexus Specifikacije: premer vretena 76 mm | največji premer obdelave 610 mm | hodi osi X 190 mm, Z 616 mm Oprema: Konjiček, nastavljalec orodij, izmetnik obdelovancev, transporter za odrezke in komplet orodja

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SCHEER FM 16 Panel Dividing System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a powerful, electronically controlled panel dividing saw featuring state-of-the-art drive technology and intuitive controls. It has been completely overhauled and newly painted – its condition is almost as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Main Technical Data: Cutting length: 3100 mm Saw depth / Blade projection: 80 mm Saw motor: 7.0 kW Scoring unit motor: 1.1 kW (can be switched off) Iedpfxjunwk Ts Ah Djtn Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering User interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & Special Equipment: Longitudinal cutting saw FM 16-3100 with hardened guides and automatic forward/reverse feed Material feed table HP 5021 with 6 clamp carriages, servo drive & measurement resolution of 0.05 mm Angle pressure device WP, adjustment range 2400 mm, fully automatic Trim cutting device SP 5000 for remainder cuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with phenolic overlay Workpiece support table HP 5025 (1800 x 800 mm), also with phenolic overlay Air cushion tables at the front incl. radial fan Saw blades included: KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Functionality: Fully operational Warranty: 12 months Dependable for Continuous Operation: This machine is in use worldwide—even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g. Thailand): the SCHEER FM 16 reliably runs in 3-shift operations – 365 days a year – and excels with maximum precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier parts and wear parts.) Flexibility & Individualization: We offer various models and equipment options—for every budget. In addition, we implement tailor-made special solutions according to your individual requirements. 📞 Contact us for a customized offer or to arrange a viewing appointment. The machine is available from stock. Delivery, commissioning, and training available on request.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, številka stroja/vozila: 1596, delovna širina: 3.050 mm, hod: 324 mm, razdalja med stojali: 2.550 mm, stiskalna sila: 200 t, PRESS FORCE: 200 tons BENDING LENGTH: 3050 mm CLEARANCE BETWEEN FRAMES: 2550 mm RAM STROKE: 320 mm CONTROL: DNC 900 Cybelec AOPD SAFETY: upon request BACKGAUGE: 5 axes, motorized (X1-X2, Z1-Z2, R) BACKGAUGE FINGERS: 2x with support FRONT SHEET SUPPORT: upon request Isdpfevf E Irsx Ah Dstn FRONT BENDING AID: 2x motorized TOOL CLAMPING: Upper/lower hydraulically actuated TOOL HOLDER: Weinbrenner type CROWNING: Hydraulic, automatic calculation SLIDING DIE: 4 positions (hemming and bending without retooling) YEAR OF MANUFACTURE: 1998 BENDING TOOL: 1 used set

Stanje: rabljeno, Leto izdelave: 1992, Press force 100 t Bending length 3100 mm Distance between uprights 2540 mm Stroke 300 mm Table height above floor 750 mm Control DNC 90 Total power requirement 8.6 kW Machine weight approx. 8,500 kg Machine dimensions approx. 3540x1240x2555 mm - 4 controlled axes - Manual crowning - Extended backgauge - Pneumatic die shifting - Hydraulic upper tool clamping - Various tools - Tool cabinet Itodpfjwf Dyxex Ah Den Extra-large stroke 300 mm - Various tools The machine does not have a valid UVV safety inspection.

Stanje: dober (rabljeno), Leto izdelave: 1999, dolžina rezanja (maks.): 4.200 mm, največja višina reza: 115 mm, Panel saw with lift-table feed Manufacturer: Scheer Model: PA 7004 Horizontal panel dividing saw with automatic lift-table feeding Including cutting optimization software New PC with DNC-AT control system installed in 11/2020, operating system Linux with PA-S5 software Cutting length: 4200 mm Travel path of material pusher: 4250 mm Cutting height: 115 mm Maximum saw blade projection: 135 mm Panel saw size: FM22 Main saw blade diameter max.: 450 mm Scoring saw blade diameter max.: 200 mm Saw blade bore: 30 mm Saw feed speed: 0–100 m/min Saw return speed: 100 m/min Number of clamps: 7 pcs Material pusher feed speed: forward 30 m/min, return 70 m/min Scrap cut-off device: SP5004 Saw motor: 11 kW, scorer: 2.2 kW Saw feed motor: 1.1 kW, table feed motor: 1.63 kW Lift table motor: 4 kW, roller conveyor drive motor: 0.37 kW Total power: 20.4 kW Front air cushion support tables: 3 pcs Itjdpsvyyn Nofx Ah Djn Table width: 800 mm, length: 2000 mm Compressed air max.: 6 bar, cut-off pressure: 7 bar Compressed air hose diameter: 10 mm Air consumption: approx. 15 liters per cycle Angle pressure unit: WP 5033 Lift table unit with driven roller conveyor Dimensions: 1700 mm x 4700 mm 3 x extraction connection, diameter: 120 mm Documentation available Declaration of conformity available

Stanje: rabljeno, Leto izdelave: 2012, Sheet width: 3100 mm Sheet thickness: 16 mm Frame gap: 3400 mm Cutting angle: 2.5° Working height: 900 mm Backgauge: 1000 mm Ijdpfx Ahjwli Nfs Djtn Hold-downs: 14 pcs Control: CYBELEC CYB TOUCH 6 Oil capacity: 500 l Strokes: 10 strokes/min Total power requirement: 30 kW Machine weight approx.: 16,400 kg Space required approx.: 4150 x 2360 x 2450 mm Features: - Electric backgauge 1000 mm - Electric cutting gap adjustment - Electric cutting angle adjustment - Cutting length limitation - CYBELEC CybTouch 6 control - Light curtain at the rear of the machine - Finger guard at the front - Ball rollers in the support table - 1x side stop - 2x front support arms - Foot switch

Stanje: rabljeno, Leto izdelave: 2013, Suitable for automatic, double-sided grinding of tooth flanks on carbide-tipped circular saw blades. Accessories: - Full enclosure - Coolant system - Automatic central lubrication - Measuring system for saw blade measurement - Control panel with LCD color display - DNC service - Alphanumeric keyboard - Grinding speed and grinding path adjustable depending on tooth surface - 2 grinding wheel mounts - Coolant fill level monitoring - Automatic grinding wheel compensation - Prepared for robotic operation with automatic loading door - Oil drip tray - 2 x saw blade magnetic holders: >Ø 320mm, >Ø 180mm - 1 centering ring Technical Data: - Circular saw blade diameter: 200 - 840 mm - Circular saw bore diameter: from 16 mm - Tooth pitch: 6 - 180 mm - Grinding path: up to 25 mm - Tangential clearance angle: 0 to 10° - Max. grinding wheel diameter: 125 mm - Grinding wheel bore diameter: 32 mm - Grinding spindle variable: 1600 - 5500 rpm - Connected load approx.: 8 kVA (400 V / 50 Hz) Isdpfxjv Sbmqj Ah Djtn - Dimensions (W x D x H): 2770 x 1900 x 2045 mm - Weight: approx. 4700 kg - Color: grey

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 Itsdpfx Aer Sxq Roh Djn - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Stanje: rabljeno, Pressure 50 t Bending length 1500 mm Frame gap 1220 mm Control Cybelec DNC 1200 Closing speed 95 mm/min Working speed 1-10 mm/sec Stroke 156 mm Itedpfora Rrhex Ah Djn Overrun time 59 ms Overrun distance 6 mm Throat depth 200 mm Distance table - ram bottom edge 301 mm Table width 160 mm Table height 850 mm X-axis 550 mm R-axis travel range +/- 50 Weight approx. 3600 kg incl. work light incl. large assortment of lower and upper tooling Re-commissioned in 2003 by manufacturer (documentation available)