Disk Mlinček nakup rabljenega (1.497)

Stanje: generalkompletno obnovljen (rabljeno), K+G Wetter WW130 The machine has been completely overhauled by us. The machine is available on site. Subject to errors and prior sale. All information is non-binding. The accuracy and completeness of the information and prices provided cannot be guaranteed. Lhjdpfxep Auaus Acysp Warranty and/or liability are excluded. The machine remains our property until full payment has been received.

Stanje: dober (rabljeno), Variator pulley, adjustable V-belt pulley, variable speed pulley, PIV gearbox, variable speed drive, adjustable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley Lsdpswy Rlkofx Acyehp - Manufacturer: Lenze, variable pulley with compression spring - Pulley outer diameter: 160 mm - Inner bore diameter: 24 x 110 mm - Dimensions: Ø160 x 110 mm - Weight: 1.9 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, Electro milling magnet, manufacturer: SAV, type: 243.77-960X485, year of manufacture: 2005, with control transformer. Dimensions: 960 mm x 485 mm, height 100 mm Weight: approximately 250 kg. Lhsdswnpkbspfx Acyop

Stanje: rabljeno, številka stroja/vozila: 60009893, Številka izdelka: 60009893 Frikcijski disk UN3-N3-OP3 D = 216 mm Ljdpfew N Npfsx Acyehp

Stanje: pripravljen za uporabo (rabljen), Double grinding pedestal, 380 volts, suitable for grinding wheels up to 500 mm. Ledpfjdt Sunjx Acyjhp

Leto izdelave: 1998, Stanje: rabljeno, Brusilnik za ostrenje ORODJA GRIFO F36 M za orodja za lesno industrijo, opremljen s hidravlično črpalko in brusilnim trakom za delitev verige, žag, rezkarjev. Lhjdpfx Acsb Umtkoyjp

Stanje: generalkompletno obnovljen (rabljeno), Krämer+Grebe WW160 The machine has been completely overhauled. All ball bearings and seals on the machine have been replaced. The interior of the machine has been completely painted and the exterior polished. Loading with (200L) trolley is possible. Inspection is of course possible by appointment. Subject to prior sale and errors. All information is non-binding. The accuracy and freedom from errors of the information and pricing provided cannot be guaranteed. Warranty and/or liability are excluded. The machine remains our property until full payment has been received. Lhsdpspuf Iusfx Acyjp

Stanje: dober (rabljeno), Leto izdelave: 2001, Maszyna nie była używana od kilku miesięcy. Lhodpfjuhfiiox Acyjp Stan dobry. Możliwa dostawa na cały świat.

Stanje: rabljeno, Grinding wheel diameter 0 mm Drive power 0 kW The following grinding spindles are in stock: Lhodpfx Ajd Ig U Rscyop 1 pc. Fortuna FAVS 100 R, 250.250, 12,000 rpm - €700 each 1 pc. SKF 1033293-1 (ex Höfler) - €1,200 each 1 pc. SKF 1033293-2 (ex Höfler) - €1,200 each 1 pc. SKF 1040329 (ex Höfler) - €1,700 each

Stanje: zelo dobro (rabljeno), Qiagen TissueLyser LT bead mill for sale in excellent condition, description available on the manufacturer’s website The TissueLyser LT is designed for molecular biology applications. This product is not intended for diagnosis, prevention or treatment of diseases. ✓ 24/7 automated online order processing ✓ Competent and professional product and technical support ✓ Fast and reliable (re-)ordering Lhodpfx Acel H Dz Usyop Features Simultaneous disruption of up to 12 samples A compact instrument with a small footprint Cooled adapter to prevent degradation of biomolecules Reproducible results for all sample types Compatible with all laboratory workflows Product Details The TissueLyser LT is a small bead mill that enables rapid and efficient disruption of up to 12 samples simultaneously. This throughput matches that of the QIAcube, which automates sample preparation using QIAGEN’s proven MiniSpin column kits. Simultaneous disruption and homogenization is achieved by rapid shaking of samples in 2 ml microcentrifuge tubes with stainless steel or glass beads. The TissueLyser LT must be used in conjunction with the cooled TissueLyser LT Adapter, which holds the tubes during the disruption process. Additional accessories include beads and bead dispensers.

Leto izdelave: 2014, Stanje: delavnici obnovljeno (rabljeno), Offered is an angle meat grinder K & G Wetter MWW-130, year 2014, with sorting unit and 2-speed operation. Motor power: 19 kW, 50A, 400V. Hopper capacity approx. 200L. See photos. Throughput approx. 3,500 kg/h. Lhedpfx Aofn Ndvjcysp 5-piece cutting set with separating set. 2 knives (new plates) E-grinder. Workshop tested, ready for immediate use. Further details on request. Payment in cash upon collection or bank transfer in advance. Sale only to businesses. No warranty or guarantee.

Leto izdelave: 1984, Stanje: rabljeno, številka stroja/vozila: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine of German manufacture for 2-, 3-, and 4-fluted tools, in good condition. Diameter range: from 5 mm to 40 mm Tool length: 500 mm Point angle: from 80° to 160° Relief angle: from 1° 30' to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool types: 2-, 3-, and 4-fluted drills and countersinks Grinding direction: For tools with left & right hand cutting Machine dimensions (L x W x H): 1350 mm x 1100 mm x 1400 mm Power supply / Control voltage: 380 Volt 50 Hz / 220 V Motor output / Total power: 2.2 kW / 2.55 kW Accessories / Special features: • 2 grinding wheel mounts with grinding wheels • 8 collets for drill holding, make: Forkardt Lhedpfxsc Nv S Ao Acysp • 6 Morse taper sleeves & drill extensions • Coolant system • Machine documentation & electrical schematic Remarks: The machine is stored at our warehouse, connected to power, and can be demonstrated by appointment.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition Lhedpfeqfguaex Acysp * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available * 2 units available

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, W pełni odnowiona. Linia do szlifowania, frezowania i mycia szkła marki BENTELER to kompleksowy system obróbki szkła zaprojektowany do pracy z dużymi taflami o wymiarach do 3300 x 6000 mm. Zintegrowana linia łączy operacje szlifowania, wiercenia, frezowania oraz mycia, co pozwala zoptymalizować produkcję i zwiększyć efektywność. Połączenie tych procesów ogranicza ręczną obsługę oraz skraca czas cyklu, gwarantując precyzyjną i wysokiej jakości obróbkę szkła. Na zdjęciach widoczny stan przed i po renowacji. Ledpfx Acou Su Ncsyohp Stan jak nowy.

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Machine ready for operation after repair, engine 55 kW. Lhodpopm Eh Nefx Acysp

Leto izdelave: 1995, Stanje: zelo dobro (rabljeno), 2 grinding aggregates with 22kW motors each Cleaning brush Variable feed speed control Lhodpohxvi Eefx Acyop Vacuum extraction of the workpiece Powered outfeed roller table

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Product number: 2912 Type: AV250 Serial number: 06090-1 Year of manufacture: 2006 Plate diameter: 250 mm Hopper capacity: 800 litres Power supply: 3 x 400V, 50Hz, 78kW Lhodpfxsttzdqj Acyep Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed auger, 2 speeds on discharge auger

Stanje: rabljeno, Double bench grinder, double grinding machine, pedestal grinder, pedestal bench grinder - Grinding wheels: max. Ø 200 x 25 mm Lsdpfx Ajdwqp Hscyehp - Operating voltage: 380 Volt - Dimensions: 560/600/H1180 mm - Weight: 118 kg

Stanje: rabljeno, Double bench grinder, double grinding machine, pedestal grinder, pedestal bench grinder - Motor power: 2.2 kW - Speed: 1400 rpm - Max. grinding wheel dimensions: Ø 350 x 50 mm Lhodpfxjdwqqao Acyjp - Operating voltage: 380 Volt - Dimensions: 760/490/H1140 mm - Weight: 238 kg

Stanje: rabljeno, Double bench grinder, double grinding machine, pedestal grinding machine, pedestal bench grinder - Motor power: 1.35 kW - Speed: 1500 rpm - Max. grinding wheels: Ø 300 x 40 mm Lhsdjcwtppopfx Acyjp - Operating voltage: 380 Volt - Dimensions: 730/400/H1075 mm - Weight: 156 kg

Stanje: rabljeno, Double grinding pedestal, double grinding machine, pedestal grinder, pedestal grinding stand - Motor power: 0.2 kW Lhodsb A H Dmopfx Acyop - Speed: 3,000 rpm - Grinding wheels: Ø 150x20x32 mm - Operating voltage: 220 Volts

Stanje: rabljeno, Double grinding stand, double wheel grinder, pedestal grinder, pedestal grinding stand, drill bit grinder - Grinding wheel: max. Ø 180 x 60 mm Lsdedwqp Rspfx Acyohp - Speed: 2,980 rpm - Motor power: approx. 0.9 kW - Operating voltage: 380 Volt - Dimensions: 520/400/H1420 mm - Weight: 140 kg

Stanje: rabljeno, Double grinder, double grinding machine, pedestal grinder, pedestal grinding machine, drill bit grinding machine Ledpfx Aodwqp Tjcyohp - Grinding wheel: max. Ø 200 x 32 mm - Speed: 3000 rpm - Motor power: 0.9 kW - Operating voltage: 380 volts - Dimensions: 570/300/H1150 mm - Weight: 118 kg

Stanje: rabljeno, Double bench grinder, double grinding machine, pedestal grinder, pedestal bench grinder Lodpfx Acsg Avqgoyjhp - Manufacturer: Cordia, double bench grinder type DOTN-150 - Grinding wheel: max. Ø 150 x 25 x 20 mm - Motor power: 0.35 kW - Speed: 3,000 rpm - Operating voltage: 380 Volt - Dimensions: 410/200/H1045 mm - Weight: 33 kg

Stanje: rabljeno, Double-ended bench grinder, double grinding machine, pedestal grinder, pedestal bench grinder - Motor power: 0.85 kW - Speed: 1,400 rpm - Max. grinding wheels: Ø 300 x 40 mm - Operating voltage: 380 Volt Lhededwqqgspfx Acyop - Dimensions: 600/420/H1140 mm - Weight: 222 kg