Cpu nakup rabljenega (252)

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 Itjdpeu Aa I Sjfx Ah Asr W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PRJ062775, Machining Performance: Drilling capacity in solid St 60 / 40 mm Drilling capacity in solid GG 20 / 50 mm Thread cutting capacity St 60 / M 36 Thread cutting capacity GG 20 / M 42 WORKING AREA: Arm travel (Y-axis) 1,050 mm Column stroke (W-axis) 410 mm Quill stroke (Z-axis) 200 mm Distance spindle nose to tabletop drilling radius 80–690 mm Swivel angle (C-axis) 330 degrees Central clamping of arm and column MACHINE TABLE Clamping surface work table 1,800 x 600 mm With 4 T-slots as per DIN 650 in X-direction (width/spacing) 18 h9 / 125 mm Machine table height 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Display: TFT flat screen, backlit and easily readable from all sides. 215 x 160 mm, Cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations Tool management: max. 500 tools Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking, and boring. Chip breaking / chip discharge: possible during drilling cycle Hole patterns: linear row, hole circle, matrix Basic software: Conversational programming, 38 zero points can be stored, rotation and mirroring, teach-in for X, Y, Z. Test graphics: graphical display of hole patterns Data interfaces: V.24 / RS-232-C USB: For reading/writing data with industrial-grade 256 MB memory MAIN SPINDLE DRIVE: Three-phase asynchronous motor, frequency controlled Drive power (100% duty cycle) 5.5 kW Torque (100% duty cycle) 250 Nm Constant from 15–200 rpm Stepless spindle speed range 12–2,800 rpm Tapered spindle: Tool mounting as per DIN 69871 SK40 with pull stud as per DIN 69872-19 AXIS DRIVES C / Y / Z / W axis: max. 0.35 / 0.35 / 2.90 / 2.40 kW Rapid traverse speed, stepless C-axis max. 4.5 rpm, Y / Z-axis max. 7.5 / 5.0 m/min W-axis max. 3.0 m/min Feed rate, stepless C / Y / Z / W axis: 5–2,000 mm/min Feed force (Z-axis) max. 12,000 N LUBRICATION Central manual lubrication MACHINE ENCLOSURE Protective fence system arranged to enclose the machine, with mesh grid External dimensions 6,000 x 6,000 mm (W x H; system element height approx. 2,000 mm) 1 access point (double-leaf door at the front of the machine, opening width approx. 2,000 mm) Door opened and closed manually. Safety door switch with magnetic lock. ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT & INSTALLATION POWER Mains connection 400 / 50 Volt / Hz Control voltage 24 Volt Power consumption 13 kVA Protection 35 A Operating voltage: 3 x 400 Volt AC / N / PE +5% -10%. Neutral conductor loadable. Frequency: 50 Hz. PAINTWORK DD textured paint Machine upper section light grey RAL 7035 Machine lower section RAL 5023 TRANSPORT DIMENSIONS Width 1,900 mm Depth 2,565 mm Height 2,788 mm MACHINE WEIGHT Machine as a transport unit with standard table approx. 2,950 kg OPTIONS: Base plate with peripheral coolant channel. Clamping surface 1,000 x 1,400 mm. Height 100 mm with 4 T-slots Electronic probe, incl. SK 40 holder Pick-up tool magazine Programmable tool change for the rear work station. Magazine arrangement with 5 tool spaces including protective cover is mounted at the right-hand side of the machine Iedpjwmcatofx Ah Aotr Coolant device version A: Integrated in the machine base for machines not considering a base plate, consisting of: Coolant tank with a capacity of 35 l, complete coolant pump assembly, flow rate approx. 40 l/min at 0.4 bar.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.590 h, številka stroja/vozila: V300397 - 10, Vrsta stroja: BOA Continette II Serijska številka: V300397 - 10 Standard: v skladu z Direktivo o strojih CE in AS 3000 Barva: RAL 5015 Itedpsihpgaofx Ah Ajr Napetost: 240-415 V / 50 Hz Moč hidravličnega motorja: 22 kW Stopnja zaščite: IP 55 Izolacijski razred: F Skupna teža: ± 9000 kg Skupne dimenzije (dך×v): 6415×2665×3034 mm Dimenzije kanala (dך×v): 2030×1000×720 mm Dimenzije lijaka (dך): 1200×730 mm Dimenzije bal (dך×v): spremenljivo*800*730 mm Stiskalna sila (maks. 280 bar): 882 kN Specifični pritisk: 43 t Prostornina hidravlične enote: 800 litrov Specifikacija hidravličnega olja: Shell Tellus TD 46 Maksimalni pritisk: 280 bar Število hidravličnih valjev: 3 Tip hidravlične enote (vertikalna): H 160-4 Število vezalnih žic: 4 PLC: Siemens Simatic CPU S7 Operaterska plošča: Siemens zaslon na dotik Glasnost: 75-86 dB(A) 6. julija 2022 je bila stiskalnica zamenjana in ni bila uporabljena Rezervni deli: vilice, vezalne sponke, hidravlični ventili, hidravlični bat za prešo, hidravlično črpalko, PLC moduli, zaslon na dotik

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The 16-channel FT2M control system from MTS was in use until recently and is now available for sale. Includes all 16 system cables for 16 control channels: Force, Displacement, and Servo Valve. Includes PC and system software. Equipment: - 16 pcs: Valve driver card Dual Valve 497.26 - 16 pcs: AC amplifier card AC Cond 497.13B - 16 pcs: DC amplifier card Dual DC Cond 497.22C - 4 pcs: 497.01 Analog chassis = 19" rack - 4 pcs: Power supply unit ±15V/+5V - 4 pcs: Station control cards 497.34 - 4 pcs: RS232 com card 497.36 - 1 pc: Hydraulic control panel 497.05 for 4 stations - 1 pc: Global Resources III card 498.71B - 4 pcs: ADDA card 498.65 Itjdpfx Ahowv Uqio Asr - 2 pcs: PROC CPU 498.96-3

Stanje: pripravljen za uporabo (rabljen), SONPLAS SPS_CPU v1_20, rabljeno, dobro ohranjeno, 100% delujoče, obseg dobave po slikah. Itsdpoxah H Nsfx Ah Asr

Leto izdelave: 2001, Stanje: rabljeno, Pressing force: 148 t Material: Carbide rods Process: Extrusion pressing process T O K A I (Japan) Hydraulic extrusion press for carbide rods Model: TP 150 Year of manufacture: 2001 Ijdpfjt Hw Snex Ah Aetr _____ Extrusion cylinder pressing force: 10 – 148 t Cylinder inner dimensions: 300 x 900 mm Cylinder stroke: 900 mm Stroke speed forward/backward/extrusion: 10/11/8 mm/sec Material cylinder tilt angle up to: 60° (90°) Workpiece tray size: 143 x 800 mm Total worktable size: 800 x 1,800 mm Adjustable workpiece support: 50 x 100 mm Hydraulic oil capacity: approx. 400 liters Material cylinder heating: 7.5 kW Hydraulic pump: 11 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 6.0 t / Machine height: approx. 3.30 m Accessories / Special features: • Designed for the production of round or profiled carbide rods via extrusion pressing of heated, vacuum-processed carbide powder. • The complete extrusion unit with the working cylinder is swiveling, allowing the extruded workpieces (carbide profile rods) to be placed easily onto storage trays situated on a transport device, which can be adjusted longitudinally and transversely by stepper motor and is also partially height-adjustable. • The entire operation can be pre-set and monitored using a conventional MITSUBISHI controller Type A 1SJHCPU. Mobile switch cabinet with indicator devices for heating temperature, angle setting, vacuum, pressure stages. • Four heating circuits: 1x for nozzle, 3x for material cylinder • Material cutting device • Vacuum pump for creating a vacuum in the material area to avoid cracks and air bubbles. Additional various accessories included. Condition: Good to very good – possibly ready for demonstration under power. Rare machine! Delivery: Ex stock – as inspected. Payment: Net, due upon receipt of invoice.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Itodpfx Ahsvv Spks Aer Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Year of manufacture: 2017 Condition: Functional – CMYK print head replaced in 2022 plus one machine for spare parts Printing Method: Direct-to-Garment (DTG) Inkjet Printer Machine Dimensions: 55'' (W) x 51'' (D) x 21'' (H) (1400mm x 1290mm x 535mm) Machine Weight: 260 lb (approx. 118 kg) Platen Sizes: Maximum print area 16'' x 21'' / 40.6cm x 53.3cm. For a complete list of available platen sizes, please contact a Brother DTG specialist. Standard Platen Size Included: 14'' x 16'' (35.6cm x 40.6cm) Ink Type: Water-based pigment ink | C, M, Y, K, W Number of Print Heads: 2 print heads / 8 ink channels Print Resolution: 1200 dpi x 1200 dpi Print Modes: Single or double pass for CMYK. Underbase and highlight for white. Data Output: Printer driver (USB, file output) Itedpfx Aheufkb Es Asr Power Supply: AC 100V-240V, 50/60Hz ± 1Hz Power Consumption: 0.8A (average) (Reference: 0.3A during circulation) Ink Curing: A heat press can be used at 356°F (180°C) for 35 seconds. For higher production volumes, a conveyor dryer is recommended at 320°F (160°C) for three and a half minutes. Time and temperature may vary depending on the dryer manufacturer. Supported Operating Systems: Windows® 7 (32 bit/64 bit), Windows 8.1 (32 bit/64 bit), Windows 10 (32 bit/64 bit), Mac OS® X v10.11.x Interfaces: USB 2.0, LAN (10BASE-T, 100BASE-TX), USB flash memory (up to 32GB, FAT32 format) Driver Requirements: 3GHz CPU (minimum recommendation), 5GB RAM Display Resolution: XGA (1024x769) (minimum recommendation) Recommended Applications: CorelDRAW® X7/X8, Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, Adobe® Photoshop Elements 14/15, GTX Graphics Lab

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Ijdpst I T N Ejfx Ah Aotr Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale: ROWE RCS 4000 Plotter DIN A0 up to 914 mm Year: 2011 Description: ROWE Model RCS 4000 large-format plotter/scanner/copier. Ijdowlhypopfx Ah Ajtr Specifications: Manufacturer: ROWE Model: RCS 4000 Device type: MFP Device functions: Print/Scan/Copy Printer: Printing technology: guided Type of print technology: Laser/LED Print color scale: Monochrome Maximum format: A0 Number of colors: 1 Maximum X monochrome print resolution: 600 dpi Maximum Y monochrome print resolution: 600 dpi Scanner: Scanner type: flatbed Scanner sensor type: CIS Maximum original size: A0 Maximum scan width: 914 mm Scan resolution (X): 600 dpi Scan resolution (Y): 600 dpi Enhanced scan resolution (X): 1200 dpi Enhanced scan resolution (Y): 1200 dpi Send scanned image by email: Yes Copier: Minimum scaling value: 25 % Maximum scaling value: 1000 % Incremental zoom: 1 Maximum copies per cycle: 999 Interfaces: Ethernet interface (RJ-45): Yes Web interface: Yes System requirements: Windows support: Yes Linux support: Yes Memory/Processor: Memory size: 1024 MB Hard disk capacity: 80 GB CPU frequency: 3000 MHz Logistics: Weight: 284 kg Dimensions: 1375 x 1175 x 750 mm Roll holders: 2 automatic rolls Overall: L=690 mm W = 1370 mm H = 1100 mm (X315) Condition: Used, age-appropriate good condition. The last service was at 22,000 meters. Service interval: approx. every 10,000 meters. Current counter: 25,000 meters (no maintenance currently due). In working order, connected to power. IMPORTANT: For logistical reasons we sell only within Europe. The buyer is responsible for removal, loading and transport. "The seller excludes any warranty for the purchased item. The item is sold as-is, without guarantee of suitability for a specific purpose or freedom from defects. The buyer confirms that they have inspected the item prior to purchase and are satisfied with its condition. The seller accepts no liability for any damage arising from use of the item. All claims by the buyer against the seller are excluded." Status as of: 09.09.2025 Price: €950 negotiable / plus VAT Prices are net, excluding VAT. If you have any questions or need further information, please do not hesitate to contact me.

Stanje: pripravljen za uporabo (rabljen), SONPLAS SPS_CPU V1_30 krmilna kartica, rabljena, v dobrem stanju, 100% delujoča, dostava kot na fotografijah Ijdpfx Ahjxah Iaj Ajtr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Kühlmitteleinrichtung, Coolant System for Cutting Fluid RUEZ Coolant Tank with Integrated Sludge Remover, Chip Conveyor • Coolant purification system for cutting fluid (KSS) • Includes two-part RUEZ lamella separator • Includes RUEZ safety tray in accordance with WHG with 100% containment capacity • Includes clean tank and RUEZ magnetic roller filter • Year of manufacture: 2022, unused & as new • RAL 7035 light grey • Superstructure for chip cart • No belt filter, sedimentation system • Immediately available • Price negotiable KSS System Description: • Total volume approx. 34,720 l • Fill volume approx. 32,710 l • Usable volume approx. 22,020 l + approx. 6,017 l (clean tank) • L/W/H approx. 7,341 mm / 2,800 mm / 2,000 mm • Tank walls 4 mm / S235JRG2 • Walk-on, divided tank cover • Tank supports approx. 100 mm • OWE 2/C level sensor for leakage protection • Inlet/distributor with strainer basket • 2 supply pumps • Type: NB100-25/4-15kW • 2,000 l/min at 2.1 bar • Piping • DN150/125 • Return piping • DN 100 • PN 16 • RUEZ float switch RB 200 - 3 / 1900 • FTL31-CA4M2AAWBJ level sensor for overfill protection (clean tank) • RUEZ control system • Siemens TIA • PLC: SIMATIC S7-1200, CPU 1215C • Visualization: KTP700 operator panel • Alarm signal light (red-yellow-green) Itodpstwpttsfx Ah Aer

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Iedjrmkfnepfx Ah Astr Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Single-board computer, VerB, CPCI 486VGA, SSC 486VGA Model: CPCI486VGA Type: SSC486VGA Itjdpswid Scjfx Ah Aer Condition: New Accessories: Product status report CPU setup CPU card PSC-486VGA Manual

Stanje: rabljeno, CNC control system, numeric control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture: approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output Card 2 pieces 0.651.708-57.3 I32 Input Card Iodpfjflrtxsx Ah Aetr 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position Control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial Interface 1 piece 0.651.974-23.2 ABS Termination Card 1 piece 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Stanje: dober (rabljeno), PLC krmiljenje, centralna enota, delovni pomnilnik, CPU, centralna naprava, centralna enota, kompaktna naprava Isdpfxsmrw U As Ah Aotr - Proizvajalec: Siemens, kompaktna naprava Simodrive - Tip: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-OAAO - Količina: 1 kos na voljo - Dimenzije: 270/170/V290 mm - Teža: 7,3 kg

Stanje: pripravljen za uporabo (rabljen), SONPLAS SPS_CPU V1_30 krmilna kartica, rabljena, v dobrem stanju, 100% delujoča, dostava kot na fotografijah Ijdpfx Aexah Igeh Astr

Stanje: novo, MASTERWOOD CNC Machining Center Type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, whether for solid wood, panel materials, or other materials. Advantages: - Extremely compact footprint - Maximum time savings due to extremely fast production times - Rapid return on investment thanks to low purchase price - Quick learning curve due to extremely simple operation - Clean workpieces even with low extraction power, thanks to processing from below - Exceptionally fast, simple, and flexible programming with MASTERWORK software (standard) - Exceptionally fast and simple complete cabinet programming using Palette CAD (option) Technical Data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min Minimum and maximum workpiece sizes depend on weight and the length-to-width ratio! Machining Units: 16-spindle boring head: Vertical spindles in X-direction: 5 Vertical spindles in Y-direction: 5 Horizontal double boring spindle in X-direction: 2+2 Horizontal double boring spindle in Y-direction: 1+1 Spindle pitch: 32 mm Spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (The grooving saw is integrated into the boring head) Control: Personal computer Processor: Intel Core i3-8100 CPU 3.60 GHz RAM: 8 GB Hard disk: 300 GB CD-ROM drive Color screen Integrated video card 2 Ethernet cards Operating system: Windows 10 Pro - 64 bit Software: MASTERWORK MACHINE VERSION Additional Data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air velocity: 25–30 m/sec Extraction port: 1 x 150 mm Additional features: - Air tables in the working area - Roller table in infeed and outfeed - Panel measurement sensor - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating manual, electrical and pneumatic diagrams provided in digital form) "PARTNERSHIP EDITION" consists of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm Motor: 4.5 kW with ISO 30 taper Including integrated extraction control (extraction on boring head only during drilling, extraction on milling unit only during milling) 6-position tool changer 3 ISO 30 collet chucks incl. collets Tool package comprising: TCT dowel drill bits: 5 pcs. 5 mm – OL 70 mm – blind hole drills 1 pc. 5 mm – OL 70 mm – through-hole drill 4 pcs. 8 mm – OL 57.5 mm – blind hole drills 2 pcs. 10 mm – OL 57.5 mm – blind hole drills 1 pc. 10 mm – OL 70 mm – blind hole drill 1 pc. 8 mm – OL 70 mm – blind hole drill 1 pc. 15 mm – OL 70 mm – blind hole drill 1 pc. 35 mm – OL 70 mm – blind hole drill 1 TCT grooving saw blade d=125 mm, bore=20 mm, width: 4.0 mm, Z=35 WSA 1 DIA router, right – OL=103 mm, NL=43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 DIA router, left – OL=103 mm, NL=43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 Solid-carbide insert finishing cutter, right, D=10 mm Ijdpovwf Iiefx Ah Aetr Folding roller conveyor at infeed Folding roller conveyor at ou...

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts Isdpfou Dg D Ajx Ah Aotr - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY Iodpfx Aheuhq Rls Aetr - Supply voltage: 380 [V] - Total drive power: 11 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Nanxing NPC330 je visokozmogljiva tračna žaga, zasnovana za hitro in natančno razrezovanje MDF, iverke, vezane plošče in drugih plošč na lesni osnovi. Gre za idealno rešitev za pohištveno industrijo, ki potrebuje visoko produktivnost in dosledno natančnost. Voziček žage poganja 2 kW servo motor z zobniškim pogonom, kar omogoča hitrost rezanja do 90 m/min in povratno hitrost do 120 m/min. Napreden programski paket vključuje optimizacijo rezanja, upravljanje delovnega procesa, simulacijo, prikaz napak in samodejni tisk etiket za učinkovito sledenje proizvodnji. Ključne značilnosti - Višina reza: do 120 mm - Širina reza: 3270 mm - Avtomatski pritisni nosilec, ki se prilagaja skupni višini skladovnice plošč za optimalno učinkovitost - Zračna lebdeča miza zagotavlja enostavno in nepoškodovano rokovanje s ploščami - 10 pnevmatskih prijemal (opcijsko 12) omogoča varno pritrditev in natančno pozicioniranje - Servo poravnava stranic za popolnoma pravokotne reze - Polni varnostni sistem: zaščita rok operaterja, pokrov lista na tečajih ("piano" pokrov), opcijska varnostna ograja in svetlobna zavesa - Hitro snemljiv glavni žagin list in enoklikovna nastavitev predrezila - Samodejni mazalni sistem za daljšo življenjsko dobo stroja in nižje stroške vzdrževanja - Industrijska elektro omara z mednarodnimi komponentami, 21,5" zaslon na dotik, PC (i5 CPU, 8 GB RAM) Tehnične specifikacije - Največja dolžina reza: 3270 mm - Največja višina reza: 90 mm (opcijsko 120 mm) - Glavni motor žage: 15 kW (opcijsko 18,5 kW), 3910 rpm - Motor predrezila: 4300 rpm - Glavni žagin list: Ø380 mm (gred Ø60 mm) - Predrezilo: Ø200 mm (gred Ø45 mm) - Podajalna hitrost: 90 m/min (povratek 120 m/min) - Skupna instalirana moč: 24,2 kW Itjdpfx Ajxcwwpeh Aor - Dimenzije stroja: 6900 × 5400 × 1820 mm - Teža: 4.560 kg - Napajanje: 380V / 50Hz / 3-fazno - Potreba po zraku: 0,6 MPa - Odsesovanje: Ø150 mm × 3, min. hitrost 28 m/s Prednosti za proizvajalce - Visoka produktivnost: paketni razrez z visoko hitrostjo naprej/povratno - Odlična natančnost: ±0,03 mm zaradi robustnega okvirja in pnevmatskih prijemal - Digitalna optimizacija: vključen AutoCut za minimizacijo odpadka in optimizacijo reznih planov - Najvišja varnost: popoloma zaprta zaščita stroja, svetlobna zavesa in gumb za nujno zaustavitev - Prijazno do uporabnika: lebdeča miza in servo-podajni sistem za enostavno rokovanje s ploščami

Stanje: rabljeno, Condition: Used (fully functional), including a 3-day functional warranty after receipt of the goods. Itjdpfjvl Ixmox Ah Asr

Stanje: dober (rabljeno), The following components from B&R Automation are for sale: - Power Panel 120 - CPU CP476 Both units were removed in 08/2022 and were fully functional up to that point without any issues. Iedpfx Ahert T Awj Aetr

Stanje: rabljeno, Leto izdelave: 2007, Overview The machine was built in 2007 by the Spanish company Seppelec. The machine is still installed but is no longer in operation as the factory has ceased production. Before decommissioning, the machine was maintained intensively and tested with phosphorescent material. Itjdpfxeq T Ak He Ah Ajr Technical Details Capacity: 13,500 l/h Pressure to prevent degassing: 7 bar Temperature during pasteurization: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control system: Siemens S7-300 CPU 314 2DP Communication interface type: Profibus

Stanje: novo, Areva Teleperm XS Control Cabinet Standard Enclosure Technology For the installation of Teleperm XS systems, control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are typically used. The cabinet is equipped with cable grip fixtures and a shield rail. It is designed for seismic loads. Cable entry and power supply are generally from below. Within the standard cabinet, module carriers are mounted in the central area. To the left and right, there are areas for installing cabinet connection elements and transceivers. Terminal blocks are used to connect peripheral cables. Other connection technologies, such as Maxi-Termi-Point, are also possible. Itodjtzaxmjpfx Ah Aor Field cables must be shielded and have pairs of twisted conductors. Buses are implemented within a cabinet via conventional cables, while fibre optic cables are used for connections outside the cabinet. Teleperm XS is suitable for systems with either distributed or central grounding (ZEP). Module Carriers Depending on the application, different configurations of module carriers are used. In the basic version, the module carrier features a continuous backplane bus and offers 21 slots. If large volumes of signals need to be processed, extension module carriers can be connected. The following variants are also supported: - Split module carriers with two smaller, independent CPUs (each with 10 slots, individual fans, and separate power supplies) - Mixed configurations, such as compact units combining CPUs with related signal conditioning modules SC 9422 Control Cabinet With cross bracing Double doors Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Protection class: IP30 Power consumption: typically 550 W, max 1280 W Weight: 300 kg More items in other sizes — new and used — available in our shop! International shipping rates on request!