Cnc - Stroj Za Rezkanje nakup rabljenega (88.250)

Stanje: dober (rabljeno), Leto izdelave: 2007, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: SPL-P 12001.20 Letnik izdelave: 2007 CNC krmiljenje 1 plazemski rezalnik z napajalnikom Kjellberg HiFocus 160i Odvodna miza: 2 x 12 m Filtrirni sistem Donaldson Torit DCE Lhjdpfx Absuv Hkgebsb

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 50 h, številka stroja/vozila: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with T-slots, crosswise every 250 mm Max. load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear axis drives Feed rate X and Y axes: up to 50 m/min Feed rate Z axis: up to 30 m/min Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Lhedpfx Aewwq Hcsbbob Additional equipment - 15-position tool changer - Control unit in separate, mobile console

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, delovne ure vretena: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h Travel ranges: Ljdpfxow Au H Rs Abbohb X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 306, Initial commissioning: 2024 Control: Heidenhain TNC 640 incl. HR 520 handwheel X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping area: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots crosswise every 250 mm Max. load: 1000 kg evenly distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 rpm Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blow air / MQL: external Linear axes drives Feed rate X and Y axes: up to 60 m/min Lhedpsvy Dugsfx Abbsb Feed rate Z axis: up to 40 m/min Color Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - Work area cover - 16-position tool changer - Control on separate, mobile console Optional at extra charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnostics Pictures show an identical machine with slightly different equipment!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Lodpfxjwywcij Abbshb Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Ledpew Rl S Ssfx Abbohb Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 110° C-axis: ± 360° Control: Heidenhain TNC 640 with HR 520 handwheel Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum, with cross T-slots spaced every 250 mm Max load: 1,000 kg evenly distributed 2-Axis Milling Head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow-off air: external Linear Axis Drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Color Enclosure, portal, control cabinet: light grey Z-slide and milling head: blue Additional Equipment - 15-position tool changer - Oriented milling spindle, e.g. for threading Lodpfxsxm Tv Ae Abbshb - Direct measuring system in all 5 axes - 2-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Condition of the Machine Fully functional, available immediately, and still powered until November 2025

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 65 m/min, hitrost podajanja osi Y: 65 m/min, hitrost podajanja os Z: 65 m/min, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 65 m/min, hitri pomik na osi Z: 65 m/min, vrtilni moment: 63 Nm, skupna masa: 90.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Commissioning: 2008 Control: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° Ledpfx Aboxl R Hvjbjhb C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining with a 300 mm long tool in a single setup (A-axis at 90° can be programmed). Machine on power: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table included with the machine. Upon request, we are happy to offer a customized solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axes drives Feed rate X-, Y- and Z-axis: up to 65 m/min Axis acceleration X-, Y- and Z-axis: up to 5 m/s² Electrical data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weights Space requirement for machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully functional, in very good condition. Can be inspected under power until April 2026.

Stanje: rabljeno, Leto izdelave: 1995, CNC portalna plamenska rezalna naprava Proizvajalec: Messer Tip: Omnimat P 7000 Leto izdelave: 1995 CNC upravljanje: Global Control Plus Širina tira: 7.000 mm Lhjdpfx Abjyay Dhsbeb 8 avtogenskih gorilnikov tip ALFA 8 dvigal Omnilift 200 Brez tirnice Brez mize Brez filtra

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Optional accessories: Lhjdpsg D Rhhsfx Abbeb - SINO 3-axis digital readout: € 1,995.00 - 1 set of levelling wedges (4 pcs.): € 480.00 Technical data: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm - T-slots: number / width x spacing: 3 / 12 x 60 mm Work spindle: - Toolholder horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor output 100% duty cycle: 1.5 kW Vertical milling head: - Speed range: 45 – 2,240 rpm - Number of speed steps: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel paths: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERROR AND PRIOR SALE!

Stanje: dober (rabljeno), Maszyna jest dostarczana z uchwytami narzędziowymi. Lhjdpsvk Ng Ajfx Abbjb

Stanje: rabljeno, Leto izdelave: 2006, x-hod 3.500 mm y-hod 2.600 mm z-hod 1.000 mm Krmiljenje HEIDENHAIN iTNC-530 Velikost mize 4.500 x 1.500 mm Razdalja med stojali 2.300 mm Hitri pomik v x-smeri 15.000 mm/min Hitri pomiki Y,Z 12.000 mm/min Podajalna hitrost 5.000 mm/min Vpenjalo za orodje ISO 50 Hitrost vretena 5.000 vrt/min Frézalna glava - zasučna UAGA 3.000 vrt/min 45° Motor vretena 22 kW Število prestav 2 Lodpfx Aox Hp Drebbshb Obremenitev mize 15.000 kg Menjalnik orodij 30 položajev Ročni upravljalnik HEIDENHAIN HR 410 Tlak zraka 6 bar Skupna priključna moč 44 kW Teža stroja cca 25 t Skladiščna št. 1120 - 326 - UAGA avtomatska indeksna glava 2,5° / 2,5° - Avtomatska podpora na desni strani za glavo UAGA - Glava z direktnim izhodom - Avtomatski menjalnik glave - Avtomatski menjalnik orodij

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel 3,700 mm y-axis travel 3,050 mm z-axis travel 1,000 mm Control unit HEIDENHAIN TNC-430 PA Distance between columns 2,300 mm Spindle nose to table surface 1,175 mm Rapid traverse x/y/z 25,000 mm/min Ljdpfx Abswg Hrgsbohb Working feedrate 15,000 mm/min Tool holder ISO-50 - DIN 69871 Table load capacity 20,000 kg Spindle motor 37 kW Milling head - swiveling + / - 45° Milling head B-axis 360,000 positions Tool changer 30 stations/tools Chip conveyor incl. Internal coolant supply 20 bar Table size 4,000 x 1,800 mm Machine weight approx. 42 t KPU-4000 AR

Stanje: rabljeno, Leto izdelave: 2005, x-pot 5.000 mm y-pot 3.100 mm z-pot 1.200 mm Krmiljenje HEIDENHAIN TNC 530 HSCI Mizna površina 5.000 x 2.000 mm T-utori 11 Širina T-utora 22 mm Obremenitev mize 30.000 kg Hitri pomik X-os 20.000 mm/min Hitri pomik v y-smeri 30.000 mm/min Lsdpfx Abjxcbiiobohb Hitrost vretena 6.000 U/min Moč vretena 32 kW Vpenjalo ISO stožec ISO 50 Razdalja med stojali 2.800 mm Notranje hlajenje, dovod 20 bar Teža stroja pribl. 65 t Potrebni prostor pribl. 15.100x6.200x6.250 mm -Pozicioniranje glave UAD II 0,1º / 0,1º -2 območja hitrosti -Orodje vpenjanje hidravlično -Glava 2 – vertikalni vretenec -ATC pozicije 30 -2 vzdolžna transporterja ostružkov -1 prečni transporter ostružkov -Prenosni ročni kolesni krmilnik -Laserska priprava orodja

Stanje: rabljeno, Leto izdelave: 1996, x-pomik 5000 mm y-pomik 2500 mm Velikost mize 2.000 x 2.500 mm Obremenitev mize 20.000 kg B-os (miza) (0,001º) mm w-os 2000 mm z-os 800 mm Hitri pomik 10.000 mm/min Vpenjanje ISO 50 Hitrost vrtenja 0–2.000 o/min Glavni pogonski motor 37 kW Navor 12–183 o/min Notranje dovajanje hladilne tekočine vključeno Ročno kolo HEIDENHAIN HR-410 Skupna potrebna moč 74 kW Teža stroja ca. 35 t -Nizka hitrost: 12–732 o/min Lhedpfxex Ak E Te Abbsb -Visoka hitrost: 733–2.000 o/min -Hitrost pri konstantnem navoru: 12–183 o/min -Hitrost pri konstantni moči: 183–2.000 o/min

Stanje: rabljeno, Leto izdelave: 2009, x-pot 3.500 mm y-pot 1.200 mm z-pot 1.250 mm Krmilnik HEIDENHAIN TNC-530 Velikost mize 1.250 x 1.250 mm Obremenitev mize 4.000 kg Delovni pomik 12.000 mm/min Hitrost vrtenja 4.000 rpm Pogonska moč 24 kW Vpenjanje ISO 50 DIN 69871 AD Avtomatska glava vretena 2,5 x 2,5 stopinje Ročni volan Heidenhain HR-410 Notranja dovod hladilne tekočine 20 bar Skupna priključna moč 46 kW Teža stroja cca. 18.000 kg Potrebni prostor cca. 7.800 x 4.850 x 3.530 mm -Integralna ohišja -Dvojni vzdolžni odsesovalnik ostružkov -Prečni odsesovalnik ostružkov -500 l rezervoar z magnetnim separatorjem in papirnatim filtrom Delno obnovljeno Ogled možen pod napetostjo Lhedpfx Aexwzf Hobbob

Stanje: rabljeno, Leto izdelave: 2008, x-travel 12,000 mm y-travel 1,500 mm z-travel 3,500 mm Feed rate 20,000 m/min Lhjdpjxvdunefx Abbob Spindle interface DIN 69871 A50/HSK63 Spindle speed 35–6,000 rpm Table load capacity 30,000 kg Operating hours 26,658 h Control system Siemens 840 Digital Milling head: automatic 45° milling head Internal coolant supply 60 bar Coolant system JUMA+GAIN with 200 L Chip conveyor incl. Tool changer with 80 positions Total power requirement 209 kW Machine weight approx. 75 t - Automatic 45° head, 6,000 rpm with positioning accuracy 0.001°/0.001° (DIN 69871 A50) - Swiveling head (5 axes), 18,000 rpm, 23 kW, DIN 69893 HSK A63 - Direct outlet head, 6,000 rpm – DIN 69871 A50 - Extension head 500 mm, 2,000 rpm, DIN 69871 A50 - Clamping tools for turning with Capto 6 clamping systems - Automatic head changer (AHC) - AITEK ACH docking station for automatic changing of 4 heads - Rotary table with LINEAR TRANSLATION mod. ZA/B-2000 Table longitudinal traverse (B) 2,000 mm Table rotation (B) 0.001° Table area 2,500 x 2,500 mm Max. speed 10,000 mm/min Hydrostatic system INCLUDED Table load capacity (max.) 30,000 kg - TURNING-MILLING TABLE BOST Ø 2,500 mm Chuck size Ø 2,500 mm Longitudinal travel of chuck 1,500 mm Table load capacity (max.) 25 t Spindle motor power 2 x 37 kW Max. rotation speed 200 rpm Max. milling performance 55 kW Axis (Turning – Milling) INCLUDED Linear traverse speed 15,000 mm/min - BLUM LASER MICRO A5 - Probe M&H PS 20 with DIN 69871 A50 - Probe M&H PS 20,00 with DIN 69893 HSK A63

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, The tool holder is brand new and still in its original packaging. There is a second one available, which is used but shows no signs of wear (see photo). Spindle: MTSK-40 Transmission ratio: 1:1 Max. speed: 6000 rpm Maximum torque [Nm]: 50 External coolant supply: Yes Internal coolant supply: Yes Internal coolant pressure: 30 BAR The holder is also compatible with the following CMZ machines: CMZ - TA15M/Y/MS/MY/YS 15 ST. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN Ledpfx Ajuzwutebbshb CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 ST. CMZ - TA25M/Y/MS/MY/YS 15 ST. CMZ - TA30M/Y/MS/MY/YS 15 ST. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Stanje: rabljeno, Leto izdelave: 2020, CNC portalni plazemski rezalni stroj s poševnim agregatom Skew Rotator Bevel Proizvajalec: Messer Tip: Multitherm 4000 Leto izdelave: 2020 CNC-krmiljenje: Global Control Plus Delovno območje: 3 x 12 m Širina tira: 4.000 mm 1 avtogeni gorilnik ALFA 1 plazemski gorilnik s poševnim agregatom Skew Rotator Bevel Napajalnik Hypertherm XPR300 Debelina reza: 50 mm prebijanje 80 mm ločilni rez Odsesovalna miza Beuting brez filtrirne enote Programska oprema: Omniwin z Bevel Lhedox Dlwmepfx Abbob ä21126

Stanje: dober (rabljeno), Leto izdelave: 2006, CNC portalna plamenska rezalna naprava Proizvajalec: Messer Tip: Easytherm 4600 Leto izdelave: 2006 Krmiljenje: Global Control Delovno območje: 3 x 9 m Brez mize!! Miza je lahko ponujena na zahtevo! Lhjdpfxoivz A Rs Abbob Dolžina tirnic: 12 m z HEB nosilcem 1 avtogeni gorilnik ALFA 1 plazemski gorilnik z napajalnikom Kjellberg 160i plus Vključuje označevanje Filtrirna naprava Torit Lastni tehniki za postavitev, zagon in izobraževanje na voljo! Vsi rezervni deli na zalogi.

Stanje: dober (rabljeno), Leto izdelave: 2016, CNC portalni stroj za plamensko rezanje Proizvajalec: Sato Tip: Satronik D5765 Leto izdelave: 2016 Lodpfsgqkc Nox Abbohb CNC upravljanje: Satocontrol CNC 3010 Tirna širina: 5.750 mm 6 avtogenih gorilnikov Brez tirnic Brez mize Brez filtra 21126ä

Stanje: zelo dobro (rabljeno), Tip stroja: Vrtalno in brusilni stroj Leto izdelave: 2014 Vrtalna zmogljivost v jeklu: pribl. Ø 50 mm Hitrost vretena: 32 - 2340 min⁻¹ Lhjdpfx Aboyc Hguobjb Vpenjanje orodja: MK 4 Vpenjalna površina mize: 800 x 250 mm Teža: pribl. 800 kg Dimenzije (Š x G x V): pribl. 1500 x 1380 x 2250 mm Stanje: zelo dobro Oprema: razno po predalih, glej slike

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Ljdpfxjwzbq Ts Abbjhb Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.500 obr/min, prehod palice: 42 mm, Premer palice (maks.): 42 mm, Proizvodni stružnica Gildemeister Sprint 42 - 8 linearnih osi s visokotlačnim sistemom in podajalnikom palic Iemca Leto izdelave: 2017 Krmiljenje: Fanuc 31l Delovne ure: pribl. 20.000 h Izvedba z 8 osmi – linearni pogon na osi X1 Hitrost vrtenja glavnega in protivretena: 6.500 min-1 Največji premer prehoda palice: 42 mm Hladilni sistem: Sanice 1: 8 bar Sanice 2 + Y: 20 bar Podajalnik palic: Iemca BOSS 552/32 Ledpsxbpp Ujfx Abbohb Transportni trak za dele

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 500 mm, skupna širina: 440 mm, skupna višina: 230 mm, skupna masa: 26 kg, moč: 1,69 kW (2,30 KM), vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Stroj za posnemanje robov kovin Znamka: Marpol Rasant Primeren za odstranjevanje robov in posnemanje robov kovin (npr. jeklo, aluminij, medenina), plastike itd. Rabljen, popolnoma delujoč Kot posnetja 45° Brezstopenjska nastavitev posnetja Maksimalni posnetek 8 mm x 45° Rezkar opremljen s karbidnimi izmenljivimi rezili Dolžina vodil: 400 mm Motor z dvema stopnjama, Obrati: Stopnja 1: 1420 obr/min Stopnja 2: 2840 obr/min Moč motorja 1,7/2,3 KM Priključek: 400 V, 3-fazni Teža: 26 kg Prostorska zahteva (D x Š x V) 500 x 440 x 230 mm Stroj je možno videti in preizkusiti pod napetostjo. Lhedpjx U D Afefx Abbsb Stroj se prodaja zaradi prihajajočega zaprtja obrata (zaradi upokojitve). Imamo še druge ponudbe na spletu.