Beveller nakup rabljenega (539)

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Nsdpfoywh Epox Ah Iswd Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Nwedpfxoywh A Ie Ah Isd Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Dolžina mize: 2400 mm Širina mize: 1200 mm Višina mize: 200 mm Luknja: 28 mm Vzorec lukenj na površini: 100 x 100 mm Debelina materiala: cca 24,5 - 27 mm Višina stranske stene: 200 mm Delovna višina: 850 mm Teža: 980 kg Poseben artikel – vzorec lukenj v vseh stranskih stenah je premaknjen za približno 1 mm navzdol. Natančna povezava kotnika ali miza ob mizo ni zagotovljena. - Visokokakovostno jeklo S355J2+N + plazemska nitridacija - Luknje v stranski steni v diagonalni razporeditvi - Robovi, vogali in luknje posneti pod 45° - Konstrukcija ojačana z rebri - Vključuje osnovno nogo 650 mm Nwedpfeyxhhysx Ah Iod

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. Nwjdpfx Asvvkipeh Ijd - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 10.020 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Per ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing rings rated at 2.5 t each, 8 lashing rings rated at 6 t each, steel side panels, foldable and removable, wooden floor boards 50 mm, rear of loading area chamfered, internal load area width 2,480 mm, removable rear stanchion, open front for through-loading, Also available with a load area length of 5,300 mm!! Rental price from €550 -- Subject to typographical errors, mistakes and changes. Sample images -- For more data: ! More details: ! Nwodpfx Ahoyxq N Hj Ijd

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 10.020 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Per ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing rings rated at 2.5 t each, 8 lashing rings rated at 6 t each, steel side panels, foldable and removable, wooden floor boards 50 mm, rear of loading area chamfered, internal load area width 2,480 mm, removable rear stanchion, open front for through-loading, Also available with a load area length of 5,300 mm!! Rental price from €550 -- Subject to typographical errors, mistakes and changes. Sample images -- Nedpfoyxq Nyex Ah Ijwd For more data: ! More details: !

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 10.020 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Per ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing rings rated at 2.5 t each, 8 lashing rings rated at 6 t each, steel side panels, foldable and removable, wooden floor boards 50 mm, rear of loading area chamfered, internal load area width 2,480 mm, removable rear stanchion, open front for through-loading, Also available with a load area length of 5,300 mm!! Nwjdpfx Aeyxq N Tsh Ied Rental price from €550 -- Subject to typographical errors, mistakes and changes. Sample images -- For more data: ! More details: !

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa približno 2.700 mm dolga x 560 mm široka, rampe z rešetkastimi rešetkami, višina nalaganja: 840 mm, 12 pritrdilnih obročev po 2,5 t, 8 x pritrdilni obroč po 6 t, jekleni stranski paneli, zložljivi in odstranljivi, lesene deske 50 mm, nakladalna površina zadaj poskošena, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prehod, na voljo tudi z dolžino nakladalne površine 5.300 mm!!, najemnina od 500 € -- Pridržujemo si pravico do napak, sprememb in tiskarskih napak, vzorčne slike -- Več podatkov na: !, More Details: ! Nwodsyxq Hlopfx Ah Iod

Stanje: novo, Leto izdelave: 2026, Number of motors: 2 units Working length: 3000 mm Control: yes / CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Right head movable - Saw blade mount: Ø 350 mm Nwsdpovzt D Tefx Ah Iod - Including 1 pc. center support. - Pneumatic clamping of aggregates. - Position control Exenso DS3 with touch panel 15” display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swivel axes. - Manual entry of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring tape data (wireless caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - Including control cabinet, motor, and software licenses. Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS saw blade wood Bevel / bevel / flat tooth – positive Item 1.4 Article number 942.5236 2 sets of DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swivel clamp for clamping the material from above. (Free access to the work table) Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad. Clamps can be individually selected via saw’s control system. Clamping sequence can also be set through the control system. Including safety pre-clamping pressure Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swivel clamps - 2 pcs. (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 table support, slotted (standard slot; special slots per customer specification upon request) Item 3.1 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price for this configuration ex works – on request! ALTERNATIVE OPTIONS, prices on request! ----- For horizontal clamping of remnants when cutting square-cut glazing bars instead of 2nd set Item 1.3 943.5236 DS combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder holders with clamping lever ----- OPTIONAL accessories, at additional cost upon request: ----- Item 4.3 Article number 942.5237 DS software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. After input of a cutting length > max. cutting length of the unit, the cutting will be cycle-controlled. (Left unit cuts, right unit moves the material and cuts to size.) Item 2.1 Article number 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) incl. charger and receiver. A robust aluminium measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing bars. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa približno 2.700 mm dolga x 560 mm široka, rampe z rešetkastimi rešetkami, višina nalaganja: 840 mm, 12 pritrdilnih obročev po 2,5 t, 8 x pritrdilni obroč po 6 t, jekleni stranski paneli, zložljivi in odstranljivi, lesene deske 50 mm, nakladalna površina zadaj poskošena, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prehod, na voljo tudi z dolžino nakladalne površine 5.300 mm!!, najemnina od 500 € -- Pridržujemo si pravico do napak, sprememb in tiskarskih napak, vzorčne slike -- Več podatkov na: !, More Details: ! Nwjdpfsyw Np Aex Ah Ied

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa cca 2.700 mm dolga x 560 mm široka, rampe z mrežastimi rešetkami, nakladalna višina: 840 mm, 12 veznih ušes po 2,5 t, 8 x vezna ušesa po 6 t, jeklene stranske stene, zložljive in odstranljive, leseni tramovi 50 mm, nakladalna površina zadaj poševna, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prekladanje, Na voljo tudi z nakladalno dolžino 5.300 mm! -- Pridržujemo si pravico do napak v tisku, sprememb in napak, slike so simbolične -- Več podatkov na: !, More Details: ! Nwodpfx Ahjyw Nkts Ijd

Stanje: novo, lastna masa: 3.050 kg, največja dovoljena obremenitev: 9.950 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Each ramp approx. 2,700 mm long x 900 mm wide. Ramps with grating. Loading height: 840 mm. 12 lashing rings, each 2.5 t; 8 lashing rings, each 6 t. Foldable and removable steel side walls. 50 mm wooden planks. Rear of loading area tapered. Internal loading width: 2,480 mm. Removable rear stanchion. Open at front for through-loading. Also available with a loading area length of 5,300 mm! Rental price from €550. -- Errors, omissions, and changes excepted, sample images -- More data at: !, More details: ! Nwedeywx Uzspfx Ah Ied

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa cca 2.700 mm dolga x 560 mm široka, rampe z mrežastimi rešetkami, nakladalna višina: 840 mm, 12 veznih ušes po 2,5 t, 8 x vezna ušesa po 6 t, jeklene stranske stene, zložljive in odstranljive, leseni tramovi 50 mm, nakladalna površina zadaj poševna, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prekladanje, Na voljo tudi z nakladalno dolžino 5.300 mm! -- Pridržujemo si pravico do napak v tisku, sprememb in napak, slike so simbolične -- Več podatkov na: !, More Details: ! Nwedpfx Aeywx Smeh Iod

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: Nsdexnlgcepfx Ah Iowd - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: novo, Stanje: novo Dobavni rok pribl. 6–8 tednov od naročila Država izvora: Poljska Cena: 16.980 € Leasing obrok: 326,02 € Primerno za plošče: 1 Največja širina posnetja: 66 mm Kot posnetja: 60° Hitrost vretena (brez obremenitve): 300–800 min⁻¹ Hitrost pomika: 0–1,2 mm/min Največja globina reza: 6 mm Motor: 6,5 kW Dolžina: 1179 mm Širina: 853 mm Višina: 1524 mm Teža: 320 kg Prenosni posnemalni stroj z avtomatskim podajanjem Nodpfeyrhrkjx Ah Iowd Merjenje v realnem času in prikaz na zaslonu Obojestransko posnemanje Spremenljiva hitrost vretena Rezkalna glava z 8 zamenljivimi vložki Daljinska upravljalna plošča z LCD zaslonom Največja širina posnetja: 66 mm pri 15° 52 mm pri 30° 50 mm pri 45° 51 mm pri 60°

Stanje: novo, Stanje: novo Dobavni rok: približno 6-8 tednov po naročilu Država izvora: Poljska Cena: 26.880 € Lizing rata: 513,41 € Primerno za plošče: 1 Primerno za cevi: 1 Maks. širina posnetja: 30 mm Kot posnetja: 60° Hitrost vretena (brez obremenitve): 500-2920 min⁻¹ Posnetje zunanjih robov cevi: 50 - 150 m/min Podajalna hitrost: 3 mm/min Višina obdelovanca: 100 mm Motor: 7,5 kW Dolžina: 1216 mm Širina: 1275 mm Teža: 850 kg Brezstopenjska nastavitev hitrosti vretena in podajalne hitrosti, optimalno za različne vrste jekla in aluminija Rotacijska visokohitrostna rezkalna glava z 10 vložki Nwsdpfx Ahsyrhrde Isd Rezkalni vložki za različne materiale 3D-kontrola stika za optimalno usmeritev obdelovanca Ergonomska kroglična miza Predal za ostružke STANDARDNI SET: SBM-500 stroj za posnemanje robov Set orodja Navodila za uporabo v ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: približno 4 tedne od naročila Država porekla: Poljska Cena: 1595 € Primerno za plošče: 1 Primerno za cevi: 1 Maks. širina posnetja: 21 mm Kot posnetja: 60° Hitrost vretena (brez obremenitve): 2740-3290 vrt/min Motor: 2,2 kW Teža: 21 kg Prenosni visokozmogljiv stroj za posnemanje robov jeklenih plošč in cevi Vodilni valji za enostavno upravljanje Nwjdjyrhq Tjpfx Ah Iod Avtomatska zaščita pred preobremenitvijo Dva rezkalna glava z 10 kvadratnimi izmenljivimi rezili

Stanje: novo, Stanje novo Dobavni rok cca. 4 tedne po naročilu Država izvora Poljska Cena 2095 € Primerno za plošče 1 Primerno za cevi 1 Maks. širina posnetja 21 mm Kot posnetja 60° Hitrost vretena (brez obremenitve) 2820 vrt/min Motor 1,1 kW Teža 20 kg Prenosni stroj za posnemanje robov za obdelavo plošč in cevi Enojna glava z 10 kvadratnimi obračalnimi rezili Posnemanje plošč in cevi z univerzalno vodilno ploščo Brezstopenjska nastavitev kota Antivibracijski sistem za udobno uporabo Indukcijski motor s povečanim zagonskim tokom Nwsdpfxsyrhq He Ah Ied Posnemanje zunanjih robov cevi: 150 - 300 mm 260 - 600 mm (opcijsko)

Stanje: novo, Stanje novo Dobavni rok približno 4 tedne po naročilu Država izvora Poljska Cena 1760 € Primerno za plošče 1 Primerno za cevi 1 Maks. širina posnetja 18 mm Kot posnetja 60 ° Radij posnetja 2-5 mm Hitrost vretena (brez obremenitve) 1800-5850 min⁻¹ Min. premer posnetja 40 mm Motor 2,2 kW Dolžina 585 mm Širina 156 mm Višina 238 mm Teža 10 kg Prenosni stroj za posnemanje za robove plošč in cevi iz jekla, aluminijevih zlitin, medenine ali plastike Kot posnetja in radij posnetja sta odvisna od dodatne opreme Brezstopenjsko nastavljanje širine posnetja Zaščita pred preobremenitvijo Nwodpfx Aeyrhpish Iod Elektronska regulacija hitrosti vrtljajev STANDARDNI SET: • Stroj za posnemanje BM-18 brez dodatne opreme • Plastični kovček • Ključ za matice 32 mm • Imbus ključ s = 6 • Mast za pritrdilne vijake (5 g, 0,17 oz) • Uporabniški priročnik

Stanje: novo, Zustand neu Lieferzeit ca. 4 Wochen ab Auftragse Ursprungsland Polen Preis 7390 € Leasingrate 142.63 € Geeignet für Platten 1 Geeignet für Rohre 1 Max. Fasenbreite 14 mm Fasenwinkel 30 ° Spindeldrehzahl (ohne Last) 9 U/min Plattendicke 6 - 40 mm Mindestplattenbreite 55 mm min. Rohr-Innendurchmesser 100 mm Zustellgeschwindigkeit 2600 mm/min Motor 2.2 kW Länge 589 mm Breite 541 mm Höhe 320 mm Gewicht 65 kg Anfasmaschine zum Fräsen von Platten und Rohren aus Kohlenstoffstahl, legiertem Stahl, Edelstahl oder Aluminiumlegierungen Anfasen der Unterkante in umgekehrter Position Standard-Scherfräser für die Bearbeitung von rostfreiem/legiertem Stahl reversible Spindel gegen Festklemmen Nwsdpfsyrhn Sex Ah Isd STANDARD-SET ABM-14 Anfasmaschine Fräser für Edelstahl Werkzeug zum Herausholen des Fräsers Rohrfaswelle Rohrfasscheibe Flachschlüssel: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm Sechskantschlüssel: 5 / 6 mm Bedienungsanleitung

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €163,101 Leasing rate: €3,082.61 Working area: 2000 x 6000 mm Plasma power source: Hypertherm XPR 170 CORE Max. sheet thickness (mild steel): 60 mm Max. sheet thickness (stainless steel): 38 mm Max. sheet thickness (aluminium): 38 mm Max. pierce thickness (mild steel): 35 mm Nsdpfx Aswiq Hash Iowd Max. pierce thickness (stainless steel): 22 mm Max. pierce thickness (aluminium): 25 mm Current: 170 A Max. cutting speed: 12 m/min Positioning speed: 35 m/min Positioning accuracy: +/- 0.1 mm Repeatability: 0.1 mm Weight: 6,000 kg HyPerformance plasma source Hypertherm XPR 170 CORE with True Hole technology Automatic gas console Plasma torch height control Laser for zero point determination Collision protection (torch breakaway system) CNC control with AURORA plasma cutting software Lantek CAD/CAM software incl. nesting Filter unit control via CNC Remote diagnostics via network Sheet alignment function Operating manual in GERMAN and ENGLISH Options: - Extraction unit with filter - Additional charge for Optimix instead of Core Further options such as 3D cutting head, drilling head, tube cutting device, oxy-fuel torch, Durma Cloud etc. available on request.

Stanje: novo, lastna masa: 3.120 kg, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, per ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 lashing eyes each 6 t, steel side panels, foldable and removable, 50 mm wooden planks, loading area tapered at the rear, internal loading width 2,480 mm, removable rear stake, open at the front for through-loading, also available with 5,300 mm load area length! Rental price from €500, -- Errors, misprints and alterations excepted, sample images -- More data on request!, More details:! Nwodeywfhhjpfx Ah Ied

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa približno 2.700 mm dolga x 560 mm široka, rampe z rešetkastimi rešetkami, višina nalaganja: 840 mm, 12 pritrdilnih obročev po 2,5 t, 8 x pritrdilni obroč po 6 t, jekleni stranski paneli, zložljivi in odstranljivi, lesene deske 50 mm, nakladalna površina zadaj poskošena, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prehod, na voljo tudi z dolžino nakladalne površine 5.300 mm!!, najemnina od 500 € -- Pridržujemo si pravico do napak, sprememb in tiskarskih napak, vzorčne slike -- Več podatkov na: !, More Details: ! Nedjywff Hopfx Ah Ijwd

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 10.020 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Per ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 lashing rings rated at 2.5 t each, 8 lashing rings rated at 6 t each, steel side panels, foldable and removable, wooden floor boards 50 mm, rear of loading area chamfered, internal load area width 2,480 mm, removable rear stanchion, open front for through-loading, Also available with a load area length of 5,300 mm!! Rental price from €550 -- Subject to typographical errors, mistakes and changes. Sample images -- Nwsdpfoywffgsx Ah Ijd For more data: ! More details: !

Stanje: novo, lastna masa: 3.120 kg, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, per ramp approx. 2,700 mm long x 900 mm wide, ramps with grating, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 lashing eyes each 6 t, steel side walls, foldable and removable, 50 mm wooden planks, loading platform tapered at the rear, internal loading width 2,480 mm, removable rear stanchion, open at the front for through-loading. Also available with a loading platform length of 5,300 mm! Rental price from €500. -- Subject to misprints, errors and changes. Sample images -- More data at: !, More Details: ! Nodpfeywfd Aex Ah Ijwd