Battenfeld nakup rabljenega (127)

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 67.092 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 10.000 kN, premer vijaka: 120 mm, razmak između stupova: 1.120 mm, delovna prostornina: 5.655 cm³, izmetalna sila: 118.000 N, hod izmetalca: 300 mm, dolžina plošče: 1.690 mm, širina plošče: 1.960 mm, skupna višina: 2.500 mm, skupna masa: 76.500 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Inventarna številka: 503007 Proizvajalec: BATTENFELD Tip: HM 10000-9200 Krmiljenje: UNILOG B4 Leto izdelave: 2003 Delovne ure: 67092 h Zapiralna sila: 10000 kN Dimenzije okvirja (š x v): 1120 x 1400 mm Velikost plošče (š x v): 1960 x 1690 mm Min. vgradna višina: 550 mm Maks. vgradna višina: 1020 mm Maks. razmik plošč: 2120 mm Odpiralni hod: 1100 mm Hedsxf E Etepfx Ah Donu Premer polža: 120 mm Prostornina hoda: 5655 ccm Tlačni pritisk brizganja: 1632 bar Oprema: Besedilo na zaslonu v nemščini Compact-Flash pogon Hidravlični izvlek jedra 4× Nastavitveni elementi Vmesnik EUROMAP 12 Vmesnik za temperaturno napravo Povečan oljni hladilnik Ogrevanje orodja 16× Dimenzije stroja (D x Š x V): 11,6 m x 2,9 m x 2,5 m Skupna teža: 76500 kg Za dodatna vprašanja smo vam na voljo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 90.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 90063, vpenjalna sila: 800 kN, premer vijaka: 75 mm, razmak između stupova: 1.120 mm, delovna prostornina: 3.756 cm³, injekcijska masa: 3.400 g, minimalna višina orodja: 500 mm, odmični hod: 1.250 mm, višina plošče: 153 mm, skupna dolžina: 11.100 mm, skupna širina: 3.200 mm, skupna višina: 2.580 mm, skupna masa: 63.000 kg, vhodna napetost: 400 V, vhodni tok: 308 A, Oprema: dokumentacija / priročnik, 2-K, dvojna šoba, stroj brez rokovanja Hnjdpow U A Ufjfx Ah Dou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Single-Screw Extruder Battenfeld BEX 1-75-30:B with Co-Extruder BEX 1-35-30:B Application: PE, PP Year of manufacture: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW RPM: 2,450 Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency drive – new three-phase motor without carbon brushes and frequency inverter Gearbox overhauled in July 2024 Condition: the extruder is in very good condition Last application: PE pipes Hnjdpfx Aeug Edkoh Deu Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Year of manufacture: 2010 Condition: the extruder is in very good condition The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6 Germany

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref.-št.: 18588 Hodpfx Ahexdk Auj Donu Proizvajalec: BATTENFELD Tip: EM 30/55 Unilog B6 Delovne ure: 3.200 Leto izdelave: 2007 Enota za zapiranje Zapiralna sila: 30 ton Razmak vodil (š x v): 300 x 300 mm Minimalna vgradna višina: 150 mm Maksimalna vgradna višina: 330 mm Odpiralna širina: 580 mm Velikost plošče (š x v): 450 x 450 mm Enota za brizganje Premer polža: 18 mm Volumen brizga: 19 cm³ Teža brizga PS: 17,5 g Tlak brizganja: 2.500 bar Mere in teža Mere D x Š x V: 3,5 x 1,1 x 1,9 m Teža stroja: 2.700 kg

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8084/11/30, Žaga za iztiskanje profilov Hodsxghrxjpfx Ah Dsnu

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Ta stroj Battenfeld HM 1600/750 je bil izdelan leta 2003. Odlikuje ga zapiralna sila 1.600 kN in vbrizgalni tlak 2.116 barov. Premer polža znaša 50 mm, vključen pa je tudi krmilni sistem unilog CC300 B4. Idealna izbira za natančno hidravlično brizganje plastike. Za več informacij o stroju nas kontaktirajte. Hnodpfxswwxhbs Ah Dsu Vrste uporabe Brizganje plastike

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 26.033 h, vpenjalna sila: 4.000 kN, premer vijaka: 75 mm, razmak između stupova: 710 mm, delovna prostornina: 1.657 cm³, tlak vbrizgavanja: 2.022 letvica, BATTENFELD TM 400-3400 Stock No.: 503220 Manufacturer: BATTENFELD Model: TM 400-3400 Control: UNILOG B6S Year of manufacture: 2008 Operating hours: 26,033 h Technical Data – Clamping Unit Clamping force: 4000 kN Tie bar spacing (h x v): 710 x 710 mm Platen size (h x v): 1010 x 1010 mm Min. mould height: 300 mm Max. mould height: 710 mm Max. daylight between platens: 1380 mm Opening stroke: 670 mm Ejector stroke: 250 mm Ejector force: 81 kN Moving platen centring diameter: 160 mm Hnjdpfx Ahjxcvike Dsu Fixed platen centring diameter: 160 mm Technical Data – Injection Unit Screw diameter: 75 mm Shot volume: 1657 ccm Injection pressure: 2022 bar Screw L/D ratio: 22 l/d Screw stroke: 375 mm Screw speed: 178 rpm Screw torque: 3759 Nm Plasticising rate (PS): 67 g/s Free injection rate (PS): 346 g/s Nozzle stroke: 600 mm Dimensions & Weight Machine dimensions (L x W x H): 7.2 m x 1.75 m x 2.42 m Total weight: 16,400 kg Equipment Multi-language screen text CEE socket 16A Hydraulic core pull 1x Air valve 1x Levelling elements EUROMAP 67 handling interface USB interface Schuko socket 16A

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Two injection moulding machines available: 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998. - Clamping force: 2,700 kN - Platen dimensions (X/Y): 900 mm / 1,020 mm - Tie bar spacing (X/Y): 630 mm / 630 mm - Opening stroke: 550 mm - Min./max. mould height: 250 mm / 620 mm - Max. platen daylight: 1,170 mm - Ejector stroke: 160 mm - Screw diameter: 55 mm - L/D ratio: 22 - Injection pressure: 1,305 bar - Shot volume: 913 cm³ - Shot weight: 830 g - Machine dimensions (X/Y/Z): approx. 6,800 mm / 1,900 mm / 3,400 mm - Weight: approx. 12,000 kg Hnsdpfxev Sufae Ah Deu - Control system: Unilog 4000 - Operating hours: approx. 40,759 h - Note: The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of manufacture: 1998. - Clamping force: 45 t - Platen dimensions (X/Y): 550 mm / 430 mm - Min. mould installation height: 180 mm - Platen daylight: 530 mm - Opening stroke: 350 mm - Ejector stroke: 100 mm - Screw diameter: 25 mm - Shot volume: 99 cm³ - Injection pressure: 1,400 bar - L/D ratio: 20 - Screw stroke: 140 mm - Machine dimensions (X/Y/Z): approx. 3,300 mm / 1,200 mm / 1,800 mm - Weight: approx. 3,300 kg - Operating hours: 74,165 h - Note: The machine shows minor hydraulic leaks. Documentation available. On-site inspection possible. Machines can be sold individually.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 65.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.100 kN, premer vijaka: 35 mm, Oprema: dokumentacija / priročnik, Machine in excellent condition, ready for use and always regularly maintained. Hnsdpfx Aewxtiveh Dsu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2.611 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 143037-100, vpenjalna sila: 3.500 kN, premer vijaka: 25 mm, razmak između stupova: 720 mm, premer stebra: 115 mm, delovna prostornina: 74 cm³, tlak vbrizgavanja: 2.940 letvica, izmetalna sila: 81.000 N, hod izmetalca: 250 mm, odmični hod: 1.050 mm, skupna dolžina: 11.800 mm, skupna širina: 4.700 mm, skupna višina: 6.800 mm, skupna masa: 16.700 kg, ogrevalna zmogljivost: 2 kW (2,72 KM), pritisk: 2.940 letvica, število vbrizgov: 2, vhodna napetost: 380 V, vhodni tok: 225 A, Oprema: dokumentacija / priročnik, For sale is an almost-new injection molding machine from Wittmann Battenfeld, year of manufacture 2023. Included in the sale is a connected handling system (robot system W873) for automated loading and unloading operations, a dosing unit from Nexus Servo MIX e200 Pre (year 2018), and a temperature control unit from Frigel RCD80/12SP (year 2021). Operating hours: 2,611 Total cycle count (automatic mode): 41,928 Key details: Injection Molding Machine: - Opening stroke increased by 200 mm, now 1,250 mm - Pneumatic core pull for clamping plate - Air valves on the clamping unit - Regulated injection, holding pressure, and back pressure - Extended nozzle stroke cylinder by 350 mm (pressure piece) - Additional LIM plasticizing unit - Additional vacuum package - Special design of safety guard and center console - Electrically operated safety guard on the operator side - Distribution block (water and air) on the nozzle and clamping plates - Additional mold monitoring Hnjdsw Eupwspfx Ah Dju - 4x temperature control zones for hot runner - Control cabinet air/air cooling unit - Leveling elements - Wittmann Battenfeld WEB SERVICE Handling System (Loading/Unloading): Z-axis: Horizontal stroke: 6,000 mm Y-axis: Vertical stroke: 2,800 mm X-axis: Transverse stroke: 2,000 mm General: Payload: workpiece + gripper 110 kg Compressed air supply: 4-8 bar Connection: 3/8 inch Power supply: 380V-400V, 50 Hz, 2Ph/N/PE 16A Current: 15.5 A Control: Wittmann CNC8 with emergency stop The system is fully functional and can be inspected by appointment. Location: 72581 Dettingen an der Erms, Germany Sale of the equipment is without warranty, as seen. Equipment is delivered free of media; disassembly and removal are the buyer's responsibility.

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8084/77/10, Odvijalna enota 350 mm Hnedpfx Ahjxghq Ij Deu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Vbrizgalna enota Premer polža: 45 mm Vbrizgalni tlak: 2116 bar Zapiralna enota Hnjdpfx Ajwwxlmjh Dsu Zapiralna sila: 1300 kN Minimalna višina orodja: 275 mm Maksimalna višina orodja: 500 mm Stroj Battenfeld HM 1300/750 je bil proizveden leta 2004. Odlikuje ga zapiralna sila 1.300 kN, vbrizgalni tlak 2.116 bar in premer polža 45 mm. Opremljen je z upravljalnim sistemom Unilog CC300 B4 in omogoča uporabo orodij višine med 275 in 500 mm. Izkoristite priložnost za nakup te hidravlične vbrizgalne brizgalke Battenfeld HM 1300/750. Za več informacij nas kontaktirajte. Uporabna področja: Brizganje plastike

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, ø 450-1200 mm PE/PP Hsdpfxew H Iyfs Ah Donu central clamping

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Two Battenfeld injection moulding machines are available. 1) Battenfeld BA 1600, year of manufacture: 2001, clamping force: 1600 kN, tie bar spacing: 520mm x 520mm, minimum/maximum mould height: 225mm/550mm, opening stroke: 480mm, centring diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of manufacture: 1995, clamping force: 500kN, tie bar spacing: 320mm x 320mm, platen dimensions X/Y: 490mm x 490mm, minimum/maximum mould height: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484 bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder issues with the screw and the injection unit backward/forward movement. Documentation is available. Inspection on site is possible. Machines can be sold separately. Hnsdpfx Ajwydg Ueh Dsu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 85.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 75 mm, razmak između stupova: 710 mm, premer stebra: 105 mm, tlak vbrizgavanja: 1.555 letvica, minimalna višina orodja: 350 mm, izmetalna sila: 59 N, hod izmetalca: 200 mm, odmični hod: 800 mm, ogrevalna zmogljivost: 31,3 kW (42,56 KM), Oprema: USB priključek, dokumentacija / priročnik, Press ready for use, very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for 12-zone mold. Hnsdpfxoww D Rno Ah Dou

Stanje: dober (rabljeno), Control card, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection moulding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price: per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/unit. Hedpfx Aeqku Nujh Donu

Leto izdelave: 1994, Stanje: rabljeno, številka stroja/vozila: 8084/77/01, Ekstruzija profila kalibrske mize Hsdpfx Ahoxghqhs Donu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Battenfeld 4500/4500.B4 Year of manufacture: 2002 Hsdpefxg D Nsfx Ah Denu Clamping force: 450 tons Screw diameter: 80 mm Shot weight: 2,150 g Tie bar spacing: 800 x 800 mm

Leto izdelave: 2001, obratovalne ure: 64.499 h, Stanje: dober (rabljeno), Conical screws, approx. 110 kg/h A.C. motor 30.0 kW Hedpfx Ajw Hy Uuoh Djnu New motor, 64,499 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Battenfeld TM 4500/4500 B4 Year of manufacture: 2002 Clamping force: 450 tonnes Screw diameter: 85 mm Shot weight: 1,870 g Tie bar spacing: 800 x 800 mm Hnjdpfefxg Dzsx Ah Dou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Hodpfxsd Tnbhs Ah Djnu Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 420 x 420 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Hedpfx Ahed Sqrrs Dsnu Tie bar distance: 420 x 420 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Hodpfog Emvhsx Ah Denu Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Battenfeld BA 1 TM Schließkraft: 100 Tonnen Schneckendurchmesser: 40 mm Baujahr: 1999 Schussgewicht: 204 g Holmenabstand: 420 x 420 mm Hsdjr Nf Rgspfx Ah Denu

Stanje: dober (rabljeno), Leto izdelave: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Year of manufacture: 1991, 1992 Clamping force: 30 t Clamping force: 20 t Hnedpfx Aofubkmsh Dou Screw diameter: 22 mm Shot weight: 30.4 g Tie bar spacing: 254 x 254 mm Available: 2x Battenfeld injection moulding machines