Bar Vozička nakup rabljenega (17.648)

Stanje: dober (rabljeno), Kontaktni manometer, tlačno stikalo, manometer, preizkusni manometer, diferenčno tlačno stikalo, tlačno stikalo, nizkotlačno stikalo Bodpfx Ageyffm Eo Tocw -Proizvajalec: VDO, kontaktni manometer 0 - 400 bar -Napetost: do 380 V -Preklopna moč: 30W 50VA -Količina: 1x manometer na voljo -Dimenzije: 220/210/V140 mm -Teža: 1,8 kg

Stanje: zelo dobro (rabljeno), Kontaktni manometer, tlačno stikalo, manometer, testni manometer, diferencialno tlačno stikalo, tlačno stikalo, nizkotlačno stikalo -Proizvajalec: VEB, kontaktni manometer 0 - 0,1 bar / 0-10 kp/cm², neuporabljeno, originalno zapakirano -Manometer: Tip 1/BM 20/2 160Ø -Stikalo: 220V 30W 30VA Bodpoyfffzjfx Ag Tecw -Količina: 6x manometrov na voljo -Cena: na kos -Dimenzija škatle: 240/240/V125 mm -Teža: 0,9 kg/kos.

Stanje: zelo dobro (rabljeno), Manometer, preizkusni manometer, merilnik tlaka z Bourdonovo cevjo, tehnika merjenja tlaka in temperature, Bourdonov manometer, tester tlaka, preizkuševalnik tlaka Bcjdpeyffarofx Ag Tjw -Proizvajalec: TGL, manometer 0 - 16 bar / 0-1,6 MPa, neuporabljen, originalna embalaža -Tip: 1/BM 20/2 160Ø 0-1,6 MPa -Količina: na voljo 18 manometrov -Cena: na kos -Dimenzije škatle: 200/180/H70 mm -Teža: 0,9 kg/kos.

Stanje: zelo dobro (rabljeno), Manometer, preizkusni manometer, merilnik tlaka s cevno vzmetjo, tehnika merjenja tlaka in temperature, cevni manometer, preizkuševalec tlaka, tester tlaka -Proizvajalec: TGL, manometer 0 - 10 bar, neuporabljen, originalna embalaža -Tip: 1/BM 20/2 160Ø 0-100 mWs -Količina: na voljo 8x manometrov -Cena: na kos Bcodpfxoyfd Tko Ag Tew -Dimenzije škatle: 200/180/H70 mm -Teža: 1 kg/kos.

Stanje: zelo dobro (rabljeno), Manometer, preizkusni manometer, merilnik tlaka s cevjo, tehnika merjenja tlaka in temperature, cevni manometer, preizkuševalec tlaka -Proizvajalec: TGL, manometer 0-600 bar, nerabljen v originalni embalaži -Tip: 1/BM 20/2 160 0-600 kp/cm² -Količina: na zalogi 20x manometrov Bcsdpsyd S Rbefx Ag Tow -Cena: na kos -Dimenzija škatle: 200/200/H70 mm -Teža: 0,9 kg/kos.

Stanje: zelo dobro (rabljeno), Manometer, preizkusni manometer, merilnik tlaka s cevno vzmetjo, tehnika merjenja tlaka in temperature, cevni manometer, tester tlaka, preizkuševalec tlaka -Proizvajalec: TGL, manometer 0-10 bar, neuporabljen, v originalni embalaži -Tip: 1/BM 20/2 160 0-250 kPa -Količina: 14x manometrov na voljo -Cena: na kos Bedpeyd H H Refx Ag Tscw -Dimenzije škatle: 200/185/V70 mm -Teža: 0,9 kg/kos.

Stanje: novo, Leto izdelave: 2025, Ročni paletni viličar 2000 kg LWPW s tehtalnim sistemom, nov 2025. Neprekinjena zaloga, glejte spletno stran. Cene EXW Nuland. Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in dodatne opreme. Vse naše dobave so po trgovinskih cenah v stanju AS-IS, brez garancij. (glejte naše splošne pogoje) Za ogled in/ali preizkus vožnje lahko brez obveznosti rezervirate termin. Pokličite vnaprej, saj nismo vedno prisotni. Bedpox Td Dtjfx Ag Tscw Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Dvojni Beznerjev olupilec za ročno lupljenje kolov in ošiljenje koncev. Stroj je v dobrem stanju in je takoj pripravljen za uporabo. Bcedjyit Npspfx Ag Tow

Stanje: rabljeno, prevoženi kilometri: 265.000 km, moč: 235 kW (319,51 KM), vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 5.450 mm, gorivo: dizel, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 9.490 mm, skupna širina: 2.600 mm, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2021, Oprema: ABS, centralno zaklepanje, drugi rezervoar za gorivo, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, navigacijski sistem, parkirni grelec, tempomat, Splošne informacije Letnik: 2021 Registrska številka: BD-853-D Tehnične informacije Število cilindrov: 6 Prostornina motorja: 6.871 cc Prednja os: Krmiljena; Profil pnevmatike levo: 100%; Profil pnevmatike desno: 100%; Vzmetenje: listnate vzmeti Zadnja os: Dvojna montaža; Profil pnevmatike levo znotraj: 70%; Profil pnevmatike levo zunaj: 70%; Profil pnevmatike desno znotraj: 70%; Profil pnevmatike desno zunaj: 70%; Vzmetenje: zračno vzmetenje Teže Lastna teža: 9.760 kg Nosilnost: 8.240 kg Dovoljena skupna masa: 18.000 kg Funkcionalno Nakladalna ploščad: BAR, zadnja dvižna vrata, 2000 kg Hladilni motor: dizel in električni Bcsdpfxeyi Ep Uo Ag Tew Vzdrževanje Tehnični pregled: veljaven do 05.2026 2x na zalogi Hlajena enota znamke: Thermo King

Stanje: rabljeno, prevoženi kilometri: 140.955 km, moč: 335 kW (455,47 KM), prva registracija: 03/2024, vrsta goriva: dizel, lastna masa: 11.330 kg, največja dovoljena obremenitev: 14.595 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/70 R22,5, konfiguracija osi: 3 osi, medosna razdalja: 4.600 mm, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 7.200 mm, velikost sprednje pnevmatike: 315/70 R22,5, velikost zadnje pnevmatike: 315/70 R22,5, Oprema: ABS, klimatska naprava, parkirni grelec, | Mercedes Actros 2646 | Euro 6e | Thermoking T 1000R z 183h | Dvigalna ploščad BÄR BC 2000 S4 | Klima, radio, stranska vrata | Stacionarno gretje, električna okna | Stranska vrata | Večfunkcijski volan, tempomat | Ogrevana sedeža, klima | Potovalni računalnik | Servis hladilnika 11/26, test tesnosti 11/26, kalibracija 11/26 | ATP 04/2029 | Naslednji servis: zračni filter 06/26 | Dimenzije tovornega prostora: D: 7,20m Š: 2,46m V: 2,49m | Celoten zaloga na: Hofgasse 25, A-4063 Hörsching | Pridržujemo si pravico do napak, sprememb in predprodaje. | Prodaja samo podjetjem Bcjdpfx Asx Digrjg Tow

Stanje: rabljeno, Leto izdelave: 2011, prevoženi kilometri: 265.853 km, moč: 243 kW (330,39 KM), prva registracija: 01/2011, skupna masa: 19.000 kg, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 03/2028, vrsta prenosa: mehanski, emisijski razred: Euro 5, prostornina tovornega prostora: 9 m³, Oprema: ABS, klimatska naprava, Internal vehicle no.: G300460 Available immediately at our premises in Kaufungen – Kassel More INFO: Contact Luis Lucena Mercedes Benz AXOR 1833 Year of manufacture: 2011 Mileage: 265,000 km Sweeper: VAL AIR BH9 High-pressure: 200 bar Water tank: 3,000 l Body volume: 9 m³ Engine hours: 15,458 h Operating hours (hydrostatic transmission): 8,608 h Operating hours (turbine): 6,016 h Operating hours (low-pressure pump): 2,444 h Operating hours (high-pressure pump): 1,807 h Financing example: * Internal reference no.: G300460 * Purchase price: €44,900.00 Bcedeyfy Anepfx Ag Tjw * Down payment: 10% * Term: 60 months * Monthly installment: €703.24 * Final residual value: €8,380.00 If you are interested in this offer or would like it adjusted to your requirements, please contact Mr. Enchev. We look forward to your call. Errors excepted. We are happy to accept your used vehicle as a trade-in. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za posnemanje robov okroglega materiala/palic premera 12 - 75 mm, s centričnim vpenjanjem, s Stöber regulacijskim menjalnikom. Bjdjx Urwkjpfx Ag Tecw

Stanje: dober (rabljeno), Leto izdelave: 1998, 1 x podajalni magazin Iemca Mini Boss 325r CNC Leto izdelave: 1998 Obdelava palic D: 3 - 25 mm Dolžina palic: 3200 mm Bcedpsrgatbjfx Ag Tjw Vgrajen kanal: 25 mm Predhodno montiran na CNC avtomatskem stružnici Hanwha LA 25 Dodatna oprema: 1 x popoln kanal 20 mm (brez drsnika) Podajalni magazin si lahko kadarkoli ogledate v našem skladišču v Reichenbachu.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, High-pressure cleaning unit, high-pressure jetting device, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, ... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400 l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800 l water tank LxWxH: approx. 1,670x1,250x1,200 mm Unladen weight without water tank: approx. 300 kg Unladen weight with 400 l water tank: approx. 320 kg Unladen weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Output: 35 HP (26 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low engine oil pressure - LED indicator for clogged air filter - LED indicator for rpm monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button Bjdpfxjf Arugs Ag Tjcw ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM adjustment +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection against high-pressure pump dry running with automatic shut-off feature. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guide: Manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve - Filtration degree: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control: - Engine on/off - Bypass on/off - RPM adjustment +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 300, 400, 500, or 800 l (with steel frame) polyethylene water tank OPTIONS ON REQUEST: - Pulsation/booster pump - 50 or 60 m ½" high-pressure hose - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" fitting ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Version with 2 HP hose reels - Mobile hot water generator 10 kW – 12 VDC - Kit with high-pressure spray gun, swivel joint, and quick coupling - Kit with high-pressure lance including 15° flat spray nozzle / rotary nozzle - Kit with high-flow lance - Kit with rotary nozzles - Kit with twin-head nozzles - Kit for water sandblasting lance - Kit for detergent injector - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Stanje: rabljeno, Leto izdelave: 2004, Rabljeni avtomatski podajalnik palic TOP AUTOMAZIONI X-FILES je ustrezna alternativa klasičnemu potisniku palic za izvedbo ne-nadzorovanih obdelav s palico na CNC stružnicah za proizvodnjo. Večnivojski, letnik izdelave 2004, v skladu s CE normami; največji premer palice 75 mm, največja dolžina palice 3300 mm. Bodpfx Agsx Nqi Ie Tjcw

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 x bar feeder LNS Bcedevt N Dyjpfx Ag Tsw Sprint 555 Year of manufacture: 2007 Bar diameter: 5 - 55 mm Bar length: 3,200 mm Previously installed on a Goodway CNC lathe. The bar feeder can be inspected at any time at our warehouse in Reichenbach.

Stanje: dober (rabljeno), Leto izdelave: 2004, Schütte SF51 6-Spindle Automatic Bar Lathe Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic bar lathe with a 51 mm spindle bore, ideal for the efficient high-volume production of turned parts. These robust machines feature an electronic cam switch system, offering high process reliability and flexibility for turning, drilling, and threading operations. The machine is renowned for its stability and flexibility in the manufacture of demanding workpieces. Technical condition: The machine has been regularly upgraded and is in excellent, as-new technical condition. Maintenance & servicing: All maintenance has been performed exclusively by specialists at regular intervals according to manufacturer specifications. Manufacturer: Schütte Model: SF 51 Cam-controlled multi-spindle automatic bar lathe Number of spindles: 6 main spindles Control type: Conventional Spindle bore: 51 mm Maximum feed: 125 mm Maximum turning length: 102 mm Maximum drilling depth: 102 mm Thread cutting attachment Chip conveyor 6-fold bar loader magazine Bedpsyhpy Usfx Ag Tscw Power supply: 400 V Collection by Buyer Due to an upcoming production change, a fixed pickup window has been scheduled: - Period: Week 13 / 2026 - Timeframe: 25.03.2026 to 27.03.2026 - Benefit for you: Exact scheduling certainty for your machine transport and commissioning at your facility. All costs for professional dismantling are already included in the purchase price. Item location: 21079 Hamburg "All from a single source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items – new and used – available in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Schütte SF51 S DNT 6-Spindle Automatic Bar Lathe Suitable for high-speed machining, including drilling, milling, and thread cutting The Schütte SF 51 S DNT is a proven, cam-controlled 6-spindle automatic bar lathe with a 51 mm spindle passage, ideal for efficient high-volume production of turned parts. These robust machines are equipped with an electronic cam control system, offering high process stability and flexibility for turning, drilling, and thread cutting operations. The SF 51 S DNT is distinguished by its sturdy construction and reliability in industrial applications. Technical condition: The machine has been regularly upgraded and is technically in like-new condition. Maintenance & Service: Exclusively professionally serviced at regular intervals by specialists. Manufacturer: Schütte Model: SF 51 S DNT Series: 67-05 Cam-controlled multi-spindle automatic bar lathe Number of spindles: 6 main spindles Control: Conventional / electronic cam control (DNT) Spindle passage: 51 mm Gripper for rear-side machining, sorting chute Independent longitudinal feed at position 5 Thread-cutting clutches 1 CNC cross slide High-pressure coolant pump Coolant system Screw-type chip conveyor Voltage: 400 V Removal by buyer Due to a planned production changeover, a fixed time window has been set for collection: - Period: Week 25 / 2026 - Date window: 15.06.2026 to 19.06.2026 - Your advantage: Precise scheduling certainty for your machine transport and commissioning in your plant. All costs for professional disassembly are already included in the purchase price. Item Location: 21079 Hamburg "Everything from one source: We are pleased to offer you suitable bank financing for your project." Bsdpjyhpq Hefx Ag Tjcw komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Mounted in a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to machines from Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General Specifications: ----- Drive motor output: 6.0 kW Voltage: 400V (50Hz) - 440V (60Hz) Current: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Bodshf Nakopfx Ag Tocw Weight: 70 kg Includes standard accessories.

Stanje: rabljeno, prevoženi kilometri: 73.832 km, moč: 71 kW (96,53 KM), prva registracija: 06/2009, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.250 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 75 l, barva: bela, vrsta prenosa: mehanski, število prestav: 6, emisijski razred: Euro 4, število sedežev: 3, Leto izdelave: 2009, Oprema: ABS, Bluetooth, centralno zaklepanje, drsna vrata, električno upravljanje oken, elektronski program stabilnosti (ESP), nadzor oprijema, spojka prikolice, Splošne informacije Število vrat: 5 Obdobje modela: apr. 2009 - sept. 2013 Koda modela: ### Kabina: enojna Tehnične informacije Navor: 250 Nm Število valjev: 4 Delovna prostornina motorja: 2.143 ccm Mere Dolžina/višina: L1H1 Teže Prazna masa: 1.865 kg Bcsdjyh Rtmepfx Ag Tow Nosilnost: 935 kg Največja dovoljena masa: 2.800 kg Notranjost Notranjost: siva Vzdrževanje, zgodovina in stanje Število lastnikov: 1 Tehnični pregled (APK): veljaven do 08.2026 Število ključev: 2 (2 daljinca) Varnost izdelka Proizvajalec: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Stanje: pripravljen za uporabo (rabljen), Sejalni stroj Mogensen Bar Sizer Tip: SV 1526 2 sita (nivoja) Bcodpfx Ageuht D Ij Tsw Pogon: 2 vibracijska motorja, vsak po 2,7 kW.

Stanje: dober (rabljeno), Preizkuševalec tlaka, manometer, preizkusni manometer, naprava za merjenje kompresije -Proizvajalec: TGL, preizkuševalec tlaka -Tlačno območje: 0 do 25 bar -Dimenzije kovčka: 330/200/H140 mm -Teža: 3,6 kg Bcedeycczuspfx Ag Tjw

Stanje: dober (rabljeno), Preizkuševalec tlaka, merilec tlaka, preizkusni manometer, merilnik kompresije Bcodpfjyccvfex Ag Tsw -Proizvajalec: Hydrotechnik Limburg, preizkuševalec tlaka -Tlačno območje: 2x 0 do 10 bar -Dimenzije: 260/150/V205 mm -Teža: 3,2 kg

Stanje: dober (rabljeno), Hidravlična enota, hidravlična črpalka, univerzalna enota, hidravlična postaja, - Hidravlični agregat: z dvojno črpalko - Motor: Leroy 3 kW / 60 bar - Hidravlični krog 1: 9 l/min - Hidravlični krog 2: 21 l/min Bedpfx Aoycck Ajg Tecw - Posamezne komponente: glejte fotografije - Dimenzije: 1320/1000/H835 mm - Teža: 351 kg