Bar Fine Kazalec nakup rabljenega (26.338)

Stanje: dober (rabljeno), Hand-operated hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump Gisdpfx Aewwqtpsfqsl - Manufacturer: Lukas, hydraulic pump hand pump two-stage pump - Model: ZPH 10/18 - Pressure range: max. 500 bar - Quantity: 1x hand pump available - Dimensions: 800/180/H210 mm - Weight: 10.5 kg

Stanje: novo, moč: 207 kW (281,44 KM), vrsta goriva: dizel, skupna masa: 15.990 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, For enquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). ----Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift ---- * Tail lift: Bär BC 1500S4 (1,500 kg) * Refrigeration: Thermo King T-1200R-50 * KIESLING single-compartment refrigerated box body with tail lift acc. to AN 232393 * Length: 7,400 mm * Width: 2,480 mm * Height: 2,400 mm * Axle configuration: 2 axles, rear axle drive * Cab: standard day cab NS * Engine: 280 TY * Gearbox: ZF automatic 8AP * Permissible gross weight: 15-16 t * Drive axle: single reduction, single axle * Rear axle air suspension * Disc brakes front/rear * Wheelbase: 5,175 mm * Driver drowsiness and attention warning system * Standard frame overhang * Heated AdBlue tank * Standard brake system * Electronic Stability Program (ESP) * Engine intake air heating for optimum cold start performance under extreme temperatures * Rear view monitoring system with camera * Blind spot monitoring system (BSIS), right side * Intelligent Speed Assistant (ISA) * Front-end monitoring (MOIS) * Pneumatic parking brake * 200-litre fuel tank, plastic, lockable * Plastic steering wheel * Heated fuel pre-filter on frame * Standard position of components on chassis * Wiring harness for alcohol immobiliser (ALC) * AdBlue tank, 30 litres * Tyre pressure monitoring system (TPMS), sensors internal * Rear axle ratio: 4.13 * Lane departure warning system (LDWS) * Connectivity box 4G incl. TCO service contract * Voltage converter 24/12 volt (10.5 Ampere) * Hill start assist (Hill Holder) for comfortable hill starts * Advanced Emergency Braking System (AEBS) * Speed limiter 90 km/h * Adaptive cruise control (ACC) * Clothes rail on cab rear wall incl. sliding hooks * Manual cab tilting device * Warning triangle, design and dimensions according to ECE-27 * Front headlights halogen * Standard day cab, flat roof version * RADIO with Bluetooth, DAB+ and 7” display * Rear mirrors suited for body width 2,600 mm * Roof hatch, manual * Bumper plastic * Cab add-on parts black * Cab interior trim with fabric upholstery * Digital tachograph 4.1 * Flat roof in white * Rear axle air suspension Godpfxoxppz Hj Afqoil * Parabolic spring front axle * Wheel chocks, 2 units * Left-hand drive for right-hand traffic * Execution temperate climate * Front shunting and towing eye * Front underrun protection for chassis with gross mass above 7,490 kg * Chassis frame in grey * C-section steel ladder frame * Chassis wax protection Tectyl 300 G Clear * ZF 8AP1000 automatic gearbox * Exhaust tailpipe under vehicle centre * Air filter unit under cab * Emission standard EURO VI E * NOISE ECE 51/03 * Two-stage engine brake. Actuated via right hand stalk * Westinghouse brake * Raw air intake without snorkel * Heated air dryer for brake system * Extension module for PTO applications * Axle load display in cluster * Tyres: 305/70R19.5 * LED rear lights * Without battery master switch * Electrical pre-installation for tail lift operation to VEHH standard * Reversing warning buzzer, deactivatable * 170 Ah batteries for Eurocargo (recommended for use with tail lift and/or PTO) * Preparation for toll system (OBU), including antenna and ...

Stanje: novo, Leto izdelave: 2025, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key advantages of the 500 L pressure vessel - Professional pressure-resistant design – made from high-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliance with European safety and quality standards. - Operating pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - Large capacity – 500 liters – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. - Multi-connection system – as many as 6 ports in sizes 1.1/4", 2", and 1/2" allow flexible integration into different systems. - Premium quality finish – durable internal and external anti-corrosion coating. - Universal installation – vertical design saves space in the workshop. Construction and technology – robust design for demanding applications Gisdoxby D Aspfx Afqjl This compressed air tank is engineered for intensive use in industrial environments. The shell’s 4 mm wall thickness of structural steel ensures resistance to working pressures up to 11 bar and provides long-term durability. All welds undergo strict quality control, and the tank surfaces are protected by a corrosion-resistant coating, durable against chemicals and environmental factors. The tank is fitted with a nameplate bearing the CE marking and UDT notified body number, which authorizes its use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and materials certificates. Precision and operational efficiency – stable pressure and optimized compressor performance With its large 500 L capacity, the vessel acts as an air buffer, stabilizing system pressure. This ensures smooth operation of all compressed air-powered devices and significantly extends compressor life by minimizing its start-stop cycles. The vertical configuration allows for space-efficient installation, ideal for facilities with limited space. A properly matched tank minimizes pressure drops and prevents overload in the pneumatic system, thereby boosting overall efficiency and safety. Standard equipment - 6 connection ports: sizes 1.1/4", 2", and 1/2" - Nameplate with CE marking - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Stanje: rabljeno, prevoženi kilometri: 291.125 km, moč: 240 kW (326,31 KM), prva registracija: 06/2021, vrsta goriva: dizel, lastna masa: 10.080 kg, največja dovoljena obremenitev: 7.835 kg, skupna masa: 18.000 kg, vrsta prenosa: samodejen, emisijski razred: Euro 6, | Mercedes Actros 1833 | Euro 6 | Thermoking T 1000R | BÄR tail lift, 1500 kg | Air conditioning, radio | Auxiliary heater, electric window lifter | Side door | Multifunction steering wheel, cruise control | Heated seats, auxiliary heater, air conditioning | On-board computer | Loading area dimensions: L: 7.50 m W: 2.46 m H: 2.49 m Seller: Christopher Glock (German/English) Mobile/WhatsApp: Mail: christopher. Full stock under: Hofgasse 25, A-4063 Hörsching | Subject to prior sale, input errors and intermediate sale. | Sale exclusively to business customers. Gisdpfewuvflox Afqel

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, IRCO Profimat podajalnik palic Leto izdelave: 2013 Godoxxq Uaepfx Afqeil Dolžina palice: 3 m Premer palice: 75 mm

Stanje: dober (rabljeno), Leto izdelave: 1964, Hydraulic power unit, hydraulic pump - Max. pressure: 40 bar - Flow rate: 11 + 4 l/min - Hydraulic tank: 450/320/H320 mm - Motor: 1.5 kW, 1410 rpm - Hydraulic valve - Pressure relief valve - Pressure gauge Gjdpfx Aocii N Njfqsil - Price: per unit - Quantity available: 3 - Dimensions: 600/1000/H850 mm - Weight: 220 kg

Stanje: novo, Leto izdelave: 2024, Discharge pressure: 10.0 bar Effective delivery volume: 1,000 L/min Motor: 400 V Tank capacity: 250 liters Machine weight: approx. 410 kg Total power requirement: 7.5 kW Dimensions (L x W x H): 1915 x 650 x 1640 mm Exhibition machine / Has not yet been in use New BOGE SOLID model range ~ List price: 9,450 Euros / Special price on request Gedpfx Afexaby Njqjil Made in Germany Equipment/features: - With tank and dryer / ready for immediate use - Microprocessor control unit SOLID base control - Network pressure sensor - Belt-driven drive system - Low compressed air temperature thanks to efficient aftercooler - Horizontally mounted compressed air receiver - Includes refrigerated compressed air dryer * Fully automatic operation with pre- and after-filter (installed) ( Available also with 7.5 bar )

Stanje: novo, Leto izdelave: 2025, COMPRESSED AIR TANK 270 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Main advantages of the 270 L pressure vessel: - Professional pressure vessel construction – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with increased requirements. - High capacity – 270 liters – enables stable supply to the pneumatic installation and reduces the frequency of compressor start-ups. Gisdpfxsxbzalj Afqol - Multi-connection system – as many as 5 connections (1", 2", 1/2") for flexible integration with various installations. - Superior build quality – durable anti-corrosion coating applied both inside and outside the tank. - Universal mounting orientation – vertical design saves space in your facility. Construction and technology – robust design for demanding industrial applications This compressed air tank was engineered for intensive use in industrial environments. The tank body is made from structural steel with a 4 mm wall thickness, ensuring resistance to working pressures up to 11 bar as well as long-term durability. All welds undergo rigorous quality control, and the entire tank is protected with an anti-corrosive paint coating, resistant to chemical and environmental factors. The tank is supplied with a nameplate featuring the CE mark and the UDT notified body number, confirming its compliance for use on the Polish and European markets. Complete technical documentation, passport, and material certificates are provided. Standard equipment: - Connection ports: 5 pcs – diameters 1", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosive coating

Leto izdelave: 2007, Stanje: rabljeno, Proizvajalec: Pallmann Model: PPSR 10-300 Leto: 2007 Tip: Kontra selektorski mlin / fini udarni mlin Nežno mletje suhih ali mokrih materialov, mehkih do srednje trdih. Visokopretočno hladno mletje z drobno porazdeljenimi delci. Teža: 7.000 kg Hitrost pogona rotorja: 1.590 vrt/min (110 kW, 380 V, 1.500 vrt/min) Hitrost sita: 660 vrt/min (55 kW, 380 V, 1.500 vrt/min) Premer udarnega rotorja: Ø 100 cm Širina sita: 30 cm Število kladiv: 60 Pnevmatski transport na izhodu iz stroja Godex R D Iyjpfx Afqsil Material: nerjaveče jeklo 316L Na voljo tehnična dokumentacija

Stanje: dober (rabljeno), Pnevmatsko tlačno stikalo -Tip: 2KA/96x96/0-10 bar -Nastavitveni tlak: 0-10 bar -Količina: 4 stikala na voljo -Cena: na kos Gjdpfx Asb A Ii Tjfqjil -Teža: 1,2 kg

Stanje: novo, Leto izdelave: 2025, Delivery pressure 10.0 bar Effective output 1,450 L/min Motor 400 V Tank capacity 250 liters Machine weight approx. 452 kg Total power requirement 11.0 kW Dimensions (LxWxH) 1915 x 650 x 1640 mm Exhibition machine / never put into operation New BOGE SOLID model series ~ List price: €11,056 / special price on request Made in Germany Gijdpfx Afsxabi Dsqel Equipment: - With tank and dryer / ready for immediate use - Microprocessor control SOLID base control - Network pressure sensor - Belt-driven drive system - Low compressed air temperature due to efficient aftercooler - Horizontally mounted compressed air tank - Including refrigerated compressed air dryer * automatic operation with pre- and after-filter (installed) (also available with 7.5 bar)

Stanje: novo, Leto izdelave: 2025, Our 3000 kg lever bar is an indispensable tool for any warehouse, workshop, or production hall that prioritizes durability and reliability. Manufactured from high-quality steel, this lever ensures longevity and resistance to mechanical damage. Its robust frame provides stability during lifting, minimizing the risk of accidents and damage to transported items. The lifting height of the bar is 90 mm. The 3000 kg transport lever is the ideal solution for moving various types of loads in diverse working environments. It is perfectly suited for both small workshops and large warehouses or manufacturing plants. With a maximum load capacity of 3000 kg, durable steel construction, transport wheels for easy maneuverability, an ergonomic and comfortable handle, and versatile applications, our lever is an indispensable tool for lifting and transporting heavy loads. If you are looking for a reliable tool for lifting and moving heavy goods, our 3000 kg transport lever will meet your expectations. Choose a proven solution that will increase your work efficiency and ensure user safety. Feel free to contact us and purchase our transport lever. We guarantee top quality and satisfaction with the use of our product. Technical specifications: Godpfx Afsvxq Nheqjil Load capacity: 3000 kg Total length: 1400 mm Tube diameter: 38x3 mm Nose plate thickness: 11 mm Nose plate width: 65 mm Weight: approx. 8 kg

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 290 mm - Mounting recess: Ø 268 mm - Bolt circle: Ø 168 mm - Through bore: Ø 70 mm Gjdpfsb E N Txjx Afqoil - Weight: 43.5 kg

Stanje: novo, Leto izdelave: 2023, Delivery pressure 10.0 bar Effective output 700 L/min Motor 400 V Tank capacity 250 liters Machine weight approx. 397 kg Total power requirement 5.5 kW Dimensions (L x W x H) 1915 x 650 x 1640 mm Showroom machine / never used in operation New BOGE SOLID series model ~ List price: €8,848 / Special price on request Gedpfx Afexaahxjqsil Made in Germany Equipment: - With air receiver and dryer / ready for immediate use - SOLID base control microprocessor control - Network pressure sensor - Belt-driven drive system - Low compressed air temperature due to efficient aftercooler - Horizontally mounted compressed air receiver - Integrated refrigeration compressed air dryer * Fully automatic operation with pre- and after-filter (installed) ( Also available with 7.5 bar )

Stanje: novo, Leto izdelave: 2025, The lever allows for safe lifting of heavy objects without the need for additional pads or blocks. This enables quick and efficient placement of a heavy item, for example, onto a transport trolley for further movement. The lifting height of the bar is 90 mm. The heavy-duty lever jack is a reliable tool designed for professionals who require robust and durable equipment for daily use in demanding environments. With an impressive lifting capacity of up to 5000 kg, this tool is ideal for various industries, such as manufacturing, construction, logistics, and automotive workshops. It is the perfect solution for lifting and moving heavy machines, steel structures, pallets, and other bulky items. One of the key advantages of this jack is its thoughtfully engineered design, combining durability with functionality. The total length of 1500 mm ensures optimal reach, allowing the operator to maneuver precisely and safely even in tight spaces. The ergonomic shape of the lever and the contoured handle provide comfortable use, minimizing the effort required to lift even the most challenging loads. Despite its high load-bearing ability, this jack weighs only about 10 kg, making it easy to transport and handle. This is a significant benefit, especially in situations where mobility and quick response to changing operational needs are essential. Manufactured from high-quality materials and crafted with precision, the jack guarantees long service life, resistance to damage, and reliability even under intensive use. The device is designed with work safety and efficiency in mind. The two-wheel base provides stability and easy maneuvering, which is especially important when moving heavy loads over short distances. Additionally, the robust construction of the jack minimizes the risk of malfunctions, ensuring trouble-free operation over a long period. In summary, the lever jack with a lifting capacity of 5000 kg, total length of 1500 mm, and a weight of approximately 10 kg is an essential tool for any professional requiring dependable equipment for handling heavy loads. Its versatility, durability, and user comfort make it an excellent choice for companies and individuals who do not compromise on quality and workplace safety. Technical data: Lifting capacity: 5000 kg Total length: 1500 mm Tube diameter: 38x3 mm Toe plate thickness: 11 mm Gjdpfx Aovxrt Iofqjil Toe plate width: 65 mm Weight: approx. 10 kg Manufacturer: Cormak

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump Gjdpob A I Sxefx Afqeil - Max. pressure: 200 bar - Flow rate: 6 l/min per pump - Drive: 0.55 kW, 1360 rpm - Hydraulic reservoir - Quantity: 4 units available - Price: per unit - Weight: 95 kg

Stanje: novo, Leto izdelave: 2022, Delivery pressure 10.0 bar effective output 1,950 L/min Motor 400 V Tank capacity 250 liters Machine weight approx. 467 kg Total power requirement 15.0 kW Dimensions (L-W-H) 1915 x 650 x 1640 mm Exhibition machine / not yet in operation New BOGE SOLID series model ~ List price: €13,576 / Special price on request Made in Germany Equipment: - with tank and dryer / ready for immediate use - Microprocessor control SOLID base control - Network pressure sensor - Belt-driven drive system Gjdpfx Afsw U U Sceqsil - Low compressed air temperature thanks to effective aftercooler - Horizontally mounted air receiver - Including refrigerated compressed air dryer * Fully automatic operation with pre- and after-filter (installed) (also available with 7.5 bar)

Stanje: novo, Leto izdelave: 2025,

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, universal unit, hydraulic station - Manufacturer: Benteler, hydraulic power unit Type Pressure: bar - Flow rate: 18 l/min Giedsv Sp Sbepfx Afqjl - Hydraulic tank: with level indicator - Accumulator: - Individual components: see photos - Dimensions: 635/560/H620 mm - Weight: 198 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsations within the system, protect the optimal operation mode of the compressor, partially remove moisture and oil from the compressed air, and create a reserve of air. Pressure Vessel 1000L – Description The compressed air pressure vessel is a cylindrical pressure device consisting of two elliptical ends, a shell with fittings, and valves. Its primary function is to reduce pulsations in the compressed air system, contributing to optimal compressor operation and aiding in the removal of moisture and oil from the compressed air. High-quality pressure vessels prove especially effective in demanding operating conditions. Our 1000-liter, 11 bar pressure vessel is a robust and capacious unit, ideal for storing compressed air and other gases under high pressure. It is engineered to withstand high pressure and ensure safe gas storage. This tank is suitable for various industries such as manufacturing, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air-producing equipment, providing a reliable gas source for both industrial and general-purpose applications. Thanks to its 1000-liter capacity, the tank allows for longer operating periods without frequent refilling. The 11 bar pressure rating means the vessel can store gas at high pressure, which is extremely useful for applications requiring more power. Our 11 bar, 1000 L pressure vessel is solidly built from high-quality materials, ensuring durability and safety. It is equipped with appropriate valves and safeguards that prevent leaks and maintain secure pressure levels. Additionally, our tank is supplied with complete documentation, certificates, and attestations, including material data used in the manufacturing process. It has also undergone inspection by a Notified Body of the Office of Technical Inspection. It features a nameplate bearing the CE mark and the number of the Notified Body. In summary, the 1000-liter, 11 bar pressure vessel is a reliable device that allows for the storage of compressed air or other gases under high pressure. Its versatility makes it a consistent source of gas for numerous industrial or utility applications. Our offer includes a broad range of pressure vessels in various capacities, making it easy to select a model tailored to the specific needs of your facility layout. Our tanks are manufactured from durable steel with increased pressure resistance and are coated with a specially prepared paint on both the interior and exterior surfaces. Both vertical and horizontal mounting models are available, allowing flexible adaptation to individual requirements. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg): 230.00 Connections: 8 Connection size: 1/2", 2" Dimensions: 222.7 x 85 cm Tank capacity (L): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Giedpov Axzmofx Afqsl Manufacturer: Cormak

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, universal power pack, hydraulic station, - Manufacturer: Bosch, hydraulic power unit type HY 1359 - Motor: 2.2 kW - Pressure: up to 105 bar - Flow rate: 10.5 l/min Gedpfxjwk Hrbe Afqoil - Hydraulic reservoir: with filter and fill level indicator - Tank capacity: 63 litres - Individual components: see photos - Dimensions: 650/510/H740 mm - Weight: 105 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, COMPRESSED AIR TANK 500 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR INSTALLATIONS Key Advantages of the 500 L Pressure Vessel Professional pressure-resistant construction – made from high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working pressure of 11 bar – suitable for most pneumatic systems, including those with increased requirements. High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces the frequency of compressor start-ups. Multi-connection system – as many as 6 ports with diameters of 1.1/4", 2", and 1/2" allow flexible connection of the tank to various installations. High-quality workmanship – durable anti-corrosive coating inside and outside the tank. Universal installation position – vertical design saves space in the facility. Design and Technology – Robust Construction for Demanding Applications This compressed air vessel is designed for intensive use in industrial environments. The body, made from 4 mm thick structural steel, ensures resistance to pressures up to 11 bar and allows for long-term operation. All welds are subject to rigorous quality control and the tank surfaces are protected by a corrosion-resistant coating that withstands chemical and environmental factors. The tank comes equipped with a nameplate featuring the CE mark and the notified UDT body number, confirming its approval for use on the Polish and European market. The set includes comprehensive technical documentation, a pressure vessel passport, and material certificates. Gijdpfx Afoxbzbpoqsl Standard Equipment Connection ports: 6 pieces – diameters 1.1/4", 2", 1/2" Nameplate with CE symbol Notified UDT body number Complete technical documentation and pressure certificate Internal and external anti-corrosion coating

Stanje: zelo dobro (rabljeno), Hladilni kompresor, hladilni stroj, kompresor za hlajenje, hladilna enota, hladilni kompresor, kompresor, ohišje filtra-sušilca, zaporni ventil, krogelni zaporni ventil, temperaturno stikalo, termostat, ekspanzijski ventil, varnostni ventil -Proizvajalec: Hansa, varnostni ventil, neuporabljen v originalni embalaži -Tip: KSV 28 bar 2442280050 Gijdpfjfyfxbsx Afqol -Priključek: G1/2" -Cena: na kos -Količina: 7 kosov -Dimenzije paketa: 150/80/H55 mm -Teža: 0,6 kg/kos

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK pressure vessel with a capacity of 200 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimised design and high pressure resistance, the tank serves effectively as both a storage buffer and a stabilising element for compressor performance. Key features of the 200 L pressure tank: - Professional pressure-resistant design – manufactured from high-grade 4 mm thick steel, ensuring resistance to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - Large capacity – 200 litres – allows steady supply to the pneumatic installation and reduces compressor start frequency. - Multi-connection system – 6 connections with diameters of 1/2", 1", and 2" provide flexible integration into various systems. - High-quality finish – durable anti-corrosive coating applied inside and outside the tank. - Versatile installation – vertical design enables space-saving placement within any facility. Technical specifications: Weight (kg): 80 Connections: 6 Connection sizes: 1/2", 1", 2" Dimensions: 166.5 x 45 cm Tank capacity (l): 200 Working pressure (bar): 11 Wall thickness (mm): 4 Diameter (mm): Ø 450 Height (mm): 1665 Standard equipment: - Connection ports: 6 pcs – diameters 1/2", 1", 2" Giodoxbzd Rjpfx Afqol - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating