Amortizer nakup rabljenega (81)

Stanje: novo, moč: 375 kW (509,86 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 2-022/IMMEDIATELY AVAILABLE ----MAN TGX 26.520 Construction Flatbed with FASSI F235 Crane – IMMEDIATELY AVAILABLE! Crane: FASSI F235A.2.24 e-dynamic * Control system for 2 additional functions with 2 hose guides * Lifting moment: 189.0 kNm (20.9 mt) * Lifting capacity: at 12.7 m still 1345kg * All hydraulic cylinders are double-acting * Dual linkage system with PROLINK (over-stretchable knuckle boom up to 15°) * Electronic overload protection with FX500 * FASSI Stability Control FSC incl. LMB II * RCS radio remote control * LED work lights, operable via RCS / display * FL-System (Full Lift): selectable high-speed valve for extensions Body: * Flatbed dimensions: 6,600 x 2,480 x 1,000 mm * Side walls: one divided (2 drop sides) per side, with side wall relief * Subframe: hot-dip galvanized grid frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed body with crane * Diesel engine MAN D2676 LFAF, 520 HP, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.26 DD with retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient Chedpfx Afexnn Tloqef * High-performance engine brake MAN EVBec, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type: leaf/air (BL) * 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and tag axle * 590 l diesel tank, 60 l AdBlue tank * Tag axle steerable and liftable * RINGFEDER towing hitch type 4040/G150B, 40 mm towing eye * GM driver’s cab: spacious (wide, long, medium height) * Comfort mattress, lower bunk, 110 mm * Pull-out refrigerator and drawer * Air-suspended comfort driver's seat with lumbar support and shoulder adjustment * Electric glass sunroof * LED lighting * MAN EasyControl control panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3-inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access keys * Lane Departure Warning LDW * Driver Attention Warning MAN AttentionGuard * Emergency Brake Assist EBA * Standard drive train extended warranty for 3rd operational year up to 450,000 km (conditions as per service record) * and much more. Financing / hire purchase, as well as leasing / partial amortization leasing is available with our leasing partner. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). Cedpfx Ajhtq Riefqohf The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, prevoženi kilometri: 10 km, moč: 132 kW (179,47 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 2.300 mm, barva: bela, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, Novo vozilo: * Nemački dokumenti * Bez registracije * Električni, grejani spoljašnji retrovizori * 10-inčni navigacioni sistem DAB sa ekranom osetljivim na dodir * Apple CarPlay / Android Auto * Vozačevo sedište sa amortizerom * Multifunkcionalni volan * Električni podizači prozora * Krovni spojler Nadgradnja: * Unutrašnje dimenzije približno D x Š x V = 410 x 210 x 230 cm * Spoljašnji zidovi 25 mm * Krov 25 mm * Utovarna platforma Dhollandia, nosivost 750 kg * Pod 16 mm, višeslojna ploča * 2 kombinovane šine za učvršćenje tereta po strani na visini od 80 i 150 cm Opcije: * Bočna vrata * Dvokrilna zadnja vrata Obezbeđenje tereta takođe kod nas dostupno: * Zatezne i vezne trake * Pregrade (sperrbalke) * Reflektivni prsluci * Transportne kutije * Zaštita za ivice tereta * Vreće za zatezanje * Zaustavljači točkova * itd. Mogućnost finansiranja i lizinga Izrađujemo nadgradnje bilo koje veličine na bilo kom šasiju. Cerada, GFK sendvič paneli, aluminijum. Chsdpew D Nwaefx Afqof Posetite nas na: Nadgradnje – kompletna vozila – prikolice – savetovanje – finansiranje Zadržavamo pravo na greške i međuprodaju, ne preuzimamo odgovornost za štamparske i tehničke greške.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Overhauled RAS MiniBendCenter 79.05 Technical Data Sheet length: 50–600 mm Sheet width: 40–600 mm Max. sheet thickness (400 N/mm²) depending on tooling: 3.0 mm Max. upper beam stroke: 500 mm Minimum leg height Standard value depending on tooling: 5 mm x s Maximum leg height: 127 mm Chsdpfx Aexlgrbsfqjf Bending cell weight: 10 tons Cladding and electrical weight: approx. 2027 kg Machine components weight: approx. 945 kg Motor control: 400V, 50/60 Hz, 3-Ph Year of manufacture: 2015 Condition: overhauled - good used condition Chobev N Eutsngqquqsc Bending Cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main Manipulator: - 3 servo motors for X,Y,Z - 1 servo motor for lower rotation axis + separate drive for rotation axis - Double sheet detection Tool Changer: - 3 servo motors for X,Y,Z - 1 pneumatic swing drive for rotation axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in the tool magazine Cladding: - Bending cell front and rear Movable Control Panel: - 18" Touch & More control unit Pallet Station: - Roller conveyor and heavy-duty chain conveyors - 1 space for new pallets (parts being processed) - 1 space for "pallet in process" - 2 spaces for finished pallets (empty or with remaining quantity) Additional Equipment: - Intelligent loading robot - Combined camera-scanner system - Analysis software - Transfer table, Sauerfeld (52x9 mm) suction cup series (7x20 mm) - Curved conveyor belt with 6 connection stations - Cladding for finished part output - Complete tooling set - RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract This high-quality used RAS MiniBendCenter 79.05 offers proven quality at an attractive price and is available directly from the manufacturer. It is a fully automatic bending center specifically designed for the efficient processing of small parts. Supplied with factory warranty, including maintenance, and the latest software version. Featuring advanced technology such as automatic sheet thickness control, an intelligent loading robot, and a powerful control system, it optimizes your production and reduces costs. Benefit from high flexibility and fast depreciation thanks to automated processes and versatile configuration.

Stanje: novo, As an authorized REHM dealer, we now offer customers in Offenburg and the surrounding area the opportunity to receive up to 40% government funding when purchasing a new MIG/MAG PULSE welding machine. Our welding specialist and REHM expert is happy to advise you and looks forward to your inquiries. REHM MIG/MAG Welding Machine FOCUS.ARC P REDUCES CO2 AND EARNS GOVERNMENT SUBSIDIES WHO PROVIDES FUNDING? The Federal Office for Economic Affairs and Export Control (BAFA) supports investment measures for the energy optimization of systems and processes. WHAT IS FUNDED? Investments that demonstrably lead to energy savings—and thus to a reduction in CO₂ emissions—are eligible for grants. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can apply for Module 4 funding. Costs for creating the energy-saving concept and for implementation support provided by an external energy consultant are also eligible. The total payback period of the entire measure must last more than 2 years. Codpow Eikvjfx Afqjhf WHAT IS THE LEVEL OF FUNDING? Up to: - 40% of the costs - €900 per tonne of CO₂ - €10 million per project BAFA subsidizes large companies with up to 30% of eligible costs (max. €500 per ton of CO₂ saved) and small and medium-sized enterprises (SMEs) with up to 40% (max. €900 per ton of CO₂ saved). The maximum funding per investment project is €10 million. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a registered office or branch in Germany are eligible to apply. The planned measures must be executed within the territory of the Federal Republic. The mandatory energy-saving concept must be prepared by a BAFA-approved energy consultant. HOW TO APPLY FOR FUNDING? 01. List: Create a list of all devices to be replaced and all new devices to be purchased. 02. Review: We will collect the necessary data at your premises and provide a preliminary assessment of your funding eligibility. At the same time, we will prepare a quotation for the new welding machines. 03. Energy Consultant: We process all data for you and forward it to a cooperating energy consultant. This saves you time and costs. 04. Application: After reviewing the data, the energy consultant will submit the funding application on your behalf. 05. Processing Time: If urgent, we can expedite your application, reducing the processing time to approximately 10 to 15 days. The following REHM MIG/MAG PULSE welding machines are BAFA-eligible: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding specialist and REHM expert will be pleased to advise you and looks forward to your inquiries.

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), Product Information: "GRILLOMAX Model Grillstation" THE MULTITALENTED GRILL, COOKING, AND BAKING STATION No matter if it’s baked goods, vegan or vegetarian dishes, fish, meat, or poultry – the Grillstation model grills, cooks, bakes, and gratinates your desired product to a crispy and juicy finish in the shortest time possible. Up to 100 dishes* per hour can be prepared simultaneously in the grill and oven drawer, all completely without the addition of oil! Perfectly crispy and juicy results with even browning ensure a unique taste experience and satisfied guests. ► I-Control function for perfect results Chedpjghr Ngofx Afqsf ► 20 predefined grilling and cooking programs ► Integrated extraction hood ► No oil or fat odors – fat-free preparation ► No specialist staff / no monitoring of the cooking process required ► Minimal exterior heat emission ► Flexible installation – space-saving ► Easy operation and fast cleaning ► Low maintenance costs – rapid amortization ► 220 / 230 V connection ► Developed and manufactured in Germany ► Sustainable and eco-friendly – lowest CO2 emissions in its class ► Customizable Technical Data: Grill unit: Dimensions: 230 (H) x 235 (D) x 50 (W) mm x 2 chambers Oven unit: 235 mm x 60 mm Weight: 42 kg Dimensions: 690 (H) x 425 (W) x 585 (D) mm Power: Ø 1,611 Watt (full operation), Ø 3,175 Watt (heating phase) Connection: 220 / 230 V / 50 Hz New price: €8,328 More photos available upon request. Thank you!

Stanje: novo, moč: 353 kW (479,95 KM), skupna masa: 41.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 5.600 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Internal reference number for customer inquiries: 5106----MAN TGS 41.480 8x4 three-way tipper with Meiller Trigenius body Vehicle: * Diesel engine MAN D2676 LFAY, 353 kW (480 HP) output, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD * MAN TipMatic driving modes: Performance, Efficiency, and Offroad, up to 70,000 kg * 8x4 drive * Leaf/leaf suspension * Differential locks on driven rear axles * Main wheelbase 2,505 mm, wheelbase between rear axles 1,400 mm * 390 l fuel tank capacity, 35 l AdBlue tank * Full braking assistant * MAN EVBec high-performance engine brake, multi-stage * Disc brakes on both front axles, drum brakes on both rear axles * Cab NN: the practical one (narrow, medium length, standard height) * Mechanical lifting roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * Sunblind for door windows, inside, mechanical, driver’s side * Refrigerated box Chsdpsxnn Hrsfx Afqof * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7 inch * MAN sound system * Navigation map Europe and Russia * Online traffic for navigation function Body: Three-way tipper body Meiller Trigenius D428 * Dimensions LxWxH 5,600 mm x 2,420 mm x 1,100 mm * Front wall 1,300 mm high * Tipper platform floor, made of HBW 450 steel, 6 mm * Load securing with floor and side wall lashing rings * Tipper platform side wall: left with Bordmatik, right swinging * Access steps on tipper platform front wall * Rear wall tipper platform, swinging * Axial pump for tipping hydraulics, MEILLER Type 296/54 * Contour marking for tipper platform, reflective, white on the sides, yellow at the rear * and more. Financing / hire purchase as well as leasing / partial amortization leasing possible with our leasing partner. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, WORRY-FREE PACKAGE FOR YOUR WELDING AUTOMATION. Whether MIG-MAG or TIG. Are you looking to automate your welding production with a cobot to tackle your challenges? Then Lorch Cobot Welding Solutions are exactly what you need! The perfectly matched package combines: • High-quality robot technology from leading cobot manufacturer Universal • Innovative welding technology by Lorch • Intuitive Lorch Cobotronic operating software • A comprehensive service offering with top-level, professional support. This makes Lorch Cobot Welding Solutions a true all-inclusive package – available for highly efficient MIG-MAG applications as well as highly demanding TIG welding tasks. THE COBOT: EASY INTEGRATION INTO YOUR WORKFLOWS. Thanks to lightweight construction and integrated safety solutions, cobots can be used in direct interaction with people. With Lorch Cobot Welding Solutions, you get a premium collaborative welding robot featuring a generous working radius, sufficient payload, low-maintenance technology, and advanced design. Additional highlights include: EASIEST OPERATION. Thanks to a touch display and intuitive user interface, the cobot becomes a natural automation tool for your team. HIGH PRODUCTIVITY. The basics of cobot welding are quickly learned – a two-day training course covers everything from commissioning and operation to welding functionalities. SIMPLE PROGRAMMING. With the Free-Drive function, the cobot is guided by hand to each weld location – including intermediate points and segments. UNIQUE SOFTWARE FOR MAXIMUM CONVENIENCE AND EFFICIENCY. Chsdpfx Asruml Ssfqof Lorch Cobotronic makes the difference. What distinguishes Lorch Cobot Welding Solutions from other cobot systems is optimized software, expertly tailored by our experienced welding professionals to perfectly match welding technology – maximizing user-friendliness and intuitive handling to increase your production efficiency. The versatile Cobot UR10e. • 1,300 mm working radius • 12.5 kg payload • Very compact footprint • Short payback period • Extensive plug & play accessories • Power source: Lorch S5 RoboMIG XT or Lorch V30 RoboTIG AC/DC Repeatability: 0.05 mm Degrees of freedom: 6 +/- Joint rotation: 360° Supply voltage: 230 V OPTIONAL: THE PERFECT ADDITION: The Cobot Turn 100 A rotary-tilt table always ensures optimal welding position during cobot welding. Exact positioning for each weld seam can be set in the program sequence. This results in increased quality, productivity gains, greater flexibility, and saves valuable time – even for complex welding tasks and circular seams. MORE WORKSPACE AND MAXIMUM FLEXIBILITY: The Cobot Move linear axis is THE addition to further expand the cobot’s working area. The cobot remains highly precise – thanks to the high-quality ball screw drive built into the Move linear axis, ensuring consistent weld quality throughout the entire workspace. THE AUTOPILOT FOR COBOT WELDING: Where traditional programming requires all paths to be predefined for the cobot to follow, the SeamPilot allows the cobot to independently find its own welding path.

Stanje: novo, MASTERWOOD CNC Machining Center Type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, whether for solid wood, panel materials, or other materials. Advantages: - Extremely compact footprint - Maximum time savings due to extremely fast production times - Rapid return on investment thanks to low purchase price Chodpfxjvwf Iis Afqof - Quick learning curve due to extremely simple operation - Clean workpieces even with low extraction power, thanks to processing from below - Exceptionally fast, simple, and flexible programming with MASTERWORK software (standard) - Exceptionally fast and simple complete cabinet programming using Palette CAD (option) Technical Data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min Minimum and maximum workpiece sizes depend on weight and the length-to-width ratio! Machining Units: 16-spindle boring head: Vertical spindles in X-direction: 5 Vertical spindles in Y-direction: 5 Horizontal double boring spindle in X-direction: 2+2 Horizontal double boring spindle in Y-direction: 1+1 Spindle pitch: 32 mm Spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (The grooving saw is integrated into the boring head) Control: Personal computer Processor: Intel Core i3-8100 CPU 3.60 GHz RAM: 8 GB Hard disk: 300 GB CD-ROM drive Color screen Integrated video card 2 Ethernet cards Operating system: Windows 10 Pro - 64 bit Software: MASTERWORK MACHINE VERSION Additional Data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air velocity: 25–30 m/sec Extraction port: 1 x 150 mm Additional features: - Air tables in the working area - Roller table in infeed and outfeed - Panel measurement sensor - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating manual, electrical and pneumatic diagrams provided in digital form) "PARTNERSHIP EDITION" consists of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm Motor: 4.5 kW with ISO 30 taper Including integrated extraction control (extraction on boring head only during drilling, extraction on milling unit only during milling) 6-position tool changer 3 ISO 30 collet chucks incl. collets Tool package comprising: TCT dowel drill bits: 5 pcs. 5 mm – OL 70 mm – blind hole drills 1 pc. 5 mm – OL 70 mm – through-hole drill 4 pcs. 8 mm – OL 57.5 mm – blind hole drills 2 pcs. 10 mm – OL 57.5 mm – blind hole drills 1 pc. 10 mm – OL 70 mm – blind hole drill 1 pc. 8 mm – OL 70 mm – blind hole drill 1 pc. 15 mm – OL 70 mm – blind hole drill 1 pc. 35 mm – OL 70 mm – blind hole drill 1 TCT grooving saw blade d=125 mm, bore=20 mm, width: 4.0 mm, Z=35 WSA 1 DIA router, right – OL=103 mm, NL=43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 DIA router, left – OL=103 mm, NL=43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 Solid-carbide insert finishing cutter, right, D=10 mm Folding roller conveyor at infeed Folding roller conveyor at ou...

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space Chedpohtq Nzjfx Afqjf - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, moč: 353 kW (479,95 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 4.900 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference number for customer inquiries: 5-099 Immediately available! In stock! MAN TGS 33.480 6x4 Three-way Tipper with Meiller Trigenius "BORDMATIK" Body Vehicle Specifications: * MAN D2676 LFAY diesel engine, 353 kW (480 hp) power, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD automatic transmission, with retarder 35 * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg GVW * 6x4 drive * Leaf spring suspension front and rear * Differential locks on the driven rear axles * 3,300 mm main wheelbase, 1,400 mm wheelbase between rear axles * 370 l diesel fuel tank, 60 l AdBlue tank * Emergency brake assist * MAN EVBec high-performance engine brake, adjustable * Disc brakes on front axle, drum brakes on rear axles * ROCKINGER trailer coupling, type 500 G 6B * NN cab: the practical option (narrow, medium length, standard height) * Mechanical tilting roof * Air-suspended driver comfort seat with lumbar support, shoulder adjustment, and seat heating * Interior sunblinds for door windows, mechanical, driver side * Refrigerator * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7-inch * MAN Sound System * Navigation maps for Europe and Russia * Online traffic information for navigation functions Body: Meiller Trigenius D316 Three-way Tipper Body * Dimensions (LxWxH): 4,900 mm x 2,420 mm x 900 mm * Front wall height: 1,100 mm * Tipper bed floor: steel HBW 450, 5 mm * Load securing with floor and side wall lashing rings * Side walls of tipper bed: left with Bordmatik, right swinging and foldable * Access steps on the front wall of the tipper bed * Rear wall of tipper bed: pendulum-mounted, automatic claw lock * Control device for tipping hydraulics in the cab, with trailer switching Chedpfexnn Icox Afqsf * Axial pump for tipping hydraulics, MEILLER type 275/1 * Reflective contour markings on the tipper body: white on the sides, yellow at the rear * And many more features Financing / hire purchase, as well as leasing / partial amortization leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Cjdpehzuvuofx Afqjhf Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, moč: 350 kW (475,87 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: črn, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 600 mm, skupna širina: 2.500 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference for inquiries: 1224/Reference vehicle---- MERCEDES-BENZ ACTROS 2548 L CONTAINER FLATBED WITH FASSI F545RA.2.28 xe-dynamic HEAVY-DUTY CRANE Loader Crane: * FASSI F545RA.2.28 xe-dynamic – at 20.8 m this crane still lifts 1,650 kg (optionally extendable with 2 manual extensions to 24.9 m and 700 kg) * Continuous slewing range * Double linkage system with PROLINK (overbending articulated arm up to 15 degrees) * FASSI stability control * Radio remote control with linear levers and load radius display * XF system (Extra Fast) * XP system (Extra Power) * FL system (Full Lift) * Outriggers radio-controlled * LED work lights * Preparation for winch (winch model Fassi V30 can be retrofitted at any time) * And much more Vehicle: * Flatbed load length 6,500 mm, load width 2,480 mm * Outer frame profile made of steel with lashing points approx. every 250 mm * Drop-side surround with Alu-SL profile * 4x container locks as retractable LAXO model with locking pins, galvanized, extendable for 3 m containers * Extendable oversize marker with clearance lights * Toolbox 1,200x600x600 mm Chodpfx Aexnn R Dsfqef * Chain box 800x600x300 mm * L CAB STREAMSPACE, 2.50 M, FLAT FLOOR * Engine OM471, R6, 12.8 L, 350 kW (476 hp), 2,300 Nm * High performance engine brake * Secondary water retarder * Gearbox G 281-12/14.93-1.0, Mercedes PowerShift 3 * Trailing axle, 8 t, steered, unloadable, liftable * Air/air suspension * 6x2 drive * Fuel tank 630 L, AdBlue tank 60 L * Central axle trailer coupling, D50, Ringfeder * Driver comfort suspension seat * Comfort lower bunk * Refrigerator * Leather steering wheel * Electric one-piece sun blind, windscreen * Multimedia cockpit, interactive * Digital radio * Navigation system * LED daytime running lights * Predictive Powertrain Control * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Cruise control * Hill-start assist, speed limiter 30 km/h * Warranty according to ATS terms, 3 years/450,000 km * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Leto izdelave: 2023, Stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION Cjdpfx Aohtq Rbofqehf - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, moč: 412 kW (560,16 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 3-488 ---- SCANIA R 560 construction materials vehicle with loading crane Loading crane: * FASSI F255RA.2.24 xe-dynamic (continuous slewing) * Max. lifting moment: 196 kNm * Max. outreach: 12.4 m with 1,415 kg lifting capacity * Continuous slewing range * Double-acting hydraulic cylinders * FL-System (Full Lift) - activatable high-speed valve for extensions * Control system for 2 additional functions with 2 hose guides, e-active * Double knee lever system with PROLINK (over-bending articulated arm up to 15°) * Electronic overload protection system with FX500 * 6-function RCH or RCS radio remote control (linear levers) with display, ADC and XP system * FASSI stability control FSC incl. LMB II * Danfoss D850 control block * Special control valves for functions: slewing, lifting, articulating * Reach 6.64 m hydraulically extendable incl. FSC * Fassi RCS remote control maxi – 6 functions with 3 joysticks (2-2-2) * Work lights operable via RCS/display Superstructure: PAVIC * Flatbed: dimensions 6,600 x 2,480 x 1,000 mm, side boards divided once (2 flaps) per side, with side board relief * Subframe: galvanised lattice frame * 45° outer frame as perforated frame for excellent load securing * Central lashing rail Vehicle description: * Scania R 560 * Engine DC13 166 560 HP SCR Euro 6 E * Transmission GRS905S * Opticruise, automated gear shift system for manual transmission * Retarder Scania R4100D with freewheeling function * Differential lock * Eco-Roll function Predictive cruise control * Suspension leaf/air * Wheelbase 4,750 mm * Drive 6x2-4 * 3rd axle steered and liftable * Tires: front axle 385/65R22.5, rear + non-driven rear axle 315/80R22.5 * Trailer coupling Rockinger 500B66000 50 mm D=200 kN * Cab CR2OH Scania Highline, sleeper cab of R series with high roof * LED headlights * LED daytime running lights/position/marker/outline/license plate * Premium leather driver's seat with seat heating and ventilation * Bed 800x2000 mm with pocket spring mattress * Flattened leather steering wheel * Automatic climate control * Auxiliary heater * Cool box * Premium infotainment system with 7" display * Radio with digital reception (DAB) Cjdpfx Afoxnnvaoqshf * Navigation system with European truck-specific maps * Lane change warning system * Predictive cruise control (CCAP) * Emergency braking assistant (AEB) * And much more Financing / hire purchase as well as leasing / partial amortisation leasing is possible with our leasing partner. For further questions, our sales team is happy to assist. This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY Codpfx Ajhzuwcsfqshf We can manufacture positioners according to individual customer requirements.

Stanje: novo, moč: 382 kW (519,37 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: črn, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, kompresor, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 3-193----Images show a reference vehicle. Chassis with bodywork without crane in stock! A MAN TGS 28.520 6x4-4, wheelbase 4350mm, with an Epsilon M12Z96 crane available at a special price from PAVIC! Also available as a complete rig! Vehicle: Variant designation: TGS 28.520 6x4-4 BL CH Engine power: 382 kW (520 HP) Main wheelbase: 4,350 mm Electronic Braking System (EBS) Anti-lock Braking System (ABS), off-road, with additional terrain logic Full braking assistant LED tail lights Driver's cab TM: the comfortable one Electric glass sunroof LED package, front headlights Premium air-suspended driver's seat Seat heating and seat ventilation Professional 12.3-inch instrument cluster MAN SmartSelect infotainment control with touchpad and direct access buttons Superstructure: OptiPa bolster body 4 OptiPa bolsters 8 OptiPa telescopic stakes Removable mudguards for snow chain mounting Chsdpjxnnxbjfx Afqjf 2 access boxes 2 snow chain holders Crane: EPSILON M120Z96 Side-folding crane Z-arm system, 9.6 m Reach: 9.6 m Financing / hire purchase, as well as leasing / partial amortization leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Leto izdelave: 2023, Stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. Codpfsiuna Eox Afqohf ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, moč: 434 kW (590,08 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, dolžina tovornega prostora: 6.800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 2-213 ----!! IMMEDIATELY AVAILABLE!! SCANIA R 590 6x4 chassis in stock with Ladekran (loader crane) Tajfun LIV or Epsilon, available as per your request. Available with a bolster body. Vehicle features: * V8 engine, 590HP, EURO 6E * 12+2-speed range-split gearbox with overdrive, 2 crawler gears, 2 reverse gears * Opticruise (Scania’s automated gear shifting system for manual transmissions) * Clutch pedal: manual + automatic (3-pedal Opticruise) * Scania retarder with freewheeling function, retarder control: manual + automatic * Differential lock * Wheelbase 4,750 mm + 1,350 mm * Air suspension, front and rear * Ringfeder 4040/G150 trailer coupling, 40 mm, D=137 kN * Tyres: front axle 385/65R22.5, rear axle 315/80R22.5, trailing axle 315/80R22.5 * CR20H Highline cab, Scania Cjdpfx Aexnnxnofqjhf * Emergency brake assist * Lane departure warning system * Predictive cruise control * LED headlights (high beam, low beam, daytime running lights, and indicators with LED technology) * Interior: V8 black leather with red stitching * Bed dimensions: 800 mm x 2,000 mm * Flat-bottom leather steering wheel * Premium infotainment system, 7" display * Radio with digital broadcasting (DAB) * Navigation, European map data * Scania Communicator C300 * TV pre-installation * CB radio Stabo XM 3004 * Storage compartment under bed, driver's side with refrigerator * Electric sunroof, and much more Body build options OptiPA bolster body * 4x OptiPa Alu A7 bolsters * 8x OptiPa Alu A7 one-piece stakes * Sturdy aluminum front wall * Loading length 6,800 mm Crane can be mounted as per your choice: Tajfun LIV or EPSILON! ---- Financing / hire purchase as well as leasing / partial amortization leasing possible with our leasing partner. For further questions, our sales team is at your service. This is a non-binding offer. Subject to prior sale, errors, and changes.

Stanje: novo, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.400 mm, Oprema: ABS, Internal reference for enquiries: 0286 ---- PAVIC THTA 44Z tandem trailer with LIFT AXLE for timber transport, suitable for log lengths of 2, 3, 4, and 5 meters. * Bolster frame construction * 4x OptiPa bolster bodies * 8x OptiPa stakes * Also available with 2x bolster bodies and 4x stakes * Permissible technical weight: 21,000 kg * Air suspension * Ride height unladen approx. 1050 mm (approx. 25-30 mm lower when loaded) * Chassis length: approx. 4400 mm (front frame to front frame) * Shunting coupling at the rear * Loader crane bracket at the front side of the main beam * Welded ring elements for securing the load, 2 on each side * Folding landing gear for improved ground clearance * Axle reinforcement for off-road specification * 2x SAF-axles, 10t capacity each * Disc brakes * Twin tyres 275/70R22.5 on steel rims * Retaining cables for the air suspension * Axle lift control: first axle with automatic axle lift and traction aid for EBS * Lifting and lowering device with one rotary slide valve * Smartboard/TIM/Infocenter * LED work lights (rearward and lateral light beams) Cjdpfx Afexnn Amjqohf * Rear lighting: Rubolight/Trucklite multifunction LED lights (dynamic indicators) * Optional extra: ALCOA Durabright aluminium wheels and impact bar with lift-up bracket (see pictures) Financing / hire purchase, as well as leasing / partial amortisation leasing, are available through our leasing partner. For further enquiries, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, moč: 405 kW (550,65 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: črn, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference number for customer inquiries: 3398----VOLVO FH 540 BL 6x4 with OPTIPA platform body and TAJFUN LIV crane! Vehicle in stock, available immediately! Vehicle: * FH Globetrotter cab * Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm * Engine brake with exhaust pressure governor * I-Shift AT2612, automated 12-speed transmission (direct drive) * Manual gear selection possible in automatic mode (incl. kick-down function) * Off-road additional program * Longitudinal and cross-axle differential locks * Wheelbase: 4,600 mm * Suspension: leaf/air * Drive axle ratio: 3.09:1 * Rockinger 50 trailer coupling * LED headlights * Daytime running lights LED, "V-light" * LED tail lights * Comfort driver's seat, air-suspended, heated, integrated seatbelt * Reinforced cab insulation * Driver comfort package Plus * Roof hatch and emergency exit, electrically operated (tinted glass) Chodpfx Aexnntrefqjf * Leather steering wheel * Compartment under dashboard with drawer * Two armrests on driver's seat * Air conditioning with automatic climate control, sun sensor, fog sensor, air quality sensor and activated carbon filter * Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides * Ramp mirror on passenger side * Internal sun visor, electric blind * Driver alert system (fatigue warning) * Lane departure warning system * Adaptive cruise control (ACC) with collision alert and emergency braking * Info and media package with navigation * High instruments: digital driver display, 12", 4 views, traffic sign recognition * Second driver info display, 9" color touchscreen * 8 speakers: dashboard, doors, sleeping area * Storage compartments above berth, capacity: 245 l * Cab parking heater, 2 kW * Luxury control panel by berth (interior light, parking heater/A/C, roof hatch, door locking, alarm, window lifter, and radio) * Refrigerator with 33 l freezer under berth * Much more Body: *Platform * Loading length to crane base: 6,800 mm * Platform body dimensions: Length 5,825 mm, Width 2,540 mm * Platform color: Black * OptiPa aluminum stakes, with red reflective tape * Tooth racks between pockets * Lashing points on the outer frame * Robust steel front wall Crane: At customer’s choice: * Palfinger Epsilon M12Z Classic 10.5 * Palfinger Epsilon Q150Z 9.6 * TajfunLIV 150Z 9.6 * TajfunLIB 150Z 9.6 cabin crane Financing / hire purchase as well as leasing / partial amortization leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, IMMEDIATE AVAILABILITY! Brand new on the market at a special price: the PAVIC HC 10 1T Mini Crawler Excavator ---Available with bucket and hydraulic breaker. Technical Specifications: * Operating weight: 1,000 kg * Digging bucket capacity: 0.025 m³ / 120 kg * Bucket width: 380 mm * Engine: CHANGCHAI (192FAM) diesel * Cylinder displacement: Single cylinder, air-cooled * Rated power: 8.2 kW / 3,600 rpm * Main pump: G5-6 * Hydraulic displacement: 6.8 ml/r * Swing motor: SANYANG (BMRS-250) Cjdexnntfepfx Afqohf * Travel motor: SANYANG (BMT-245) * Travel speed: 1.5 km/h * Overall dimensions (L x W x H): 2,775 x 930 x 2,219 mm * Wheelbase: 910 mm * Total track length: 1,230 mm * Platform ground clearance: 380 mm * Platform tail swing radius: 784 mm * Chassis width: 896 mm * Track width: 180 mm * Chassis ground clearance: 132 mm * Track height: 320 mm * Working Range: * Maximum digging depth: 1,650 mm * Maximum vertical digging depth: 1,375 mm * Maximum digging height: 2,610 mm * Maximum dumping height: 1,850 mm * Maximum digging radius at ground level: 2,850 mm * Minimum swing radius: 1,330 mm * Maximum dozer blade lift height: 345 mm * Maximum dozer blade digging depth: 255 mm * Includes hydraulic breaker! Financing / hire purchase as well as leasing / partial amortization leasing available through our leasing partner. Our sales team is at your disposal for further questions. This is a non-binding offer. Subject to prior sale, corrections, and changes.

Stanje: novo, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.800 mm, Oprema: ABS, Internal reference number for customer inquiries: 8140 & 9289 ---- Pavic HTA 27 3-axle short timber bolsters trailer with twin or single tires! _____ Cedpfoxnnz Njx Afqehf Pavic HTA 27 68Z 3-axle short timber trailer with twin tires: Bolster body * 4x OPTIPA SL bolsters, or optionally 6x OPTIPA SL bolsters * 8x OPTIPA AL10 stakes, or optionally 12x OPTIPA AL10 stakes * 3x SAF 11t off-road axles * Wheelbase: 3830 mm * Leaf/leaf suspension * Drum brakes * Twin tires: 12x 275/70R22.5 * Technically possible gross vehicle weight: 33,000 kg! * Adjustable-length drawbar * Chassis length approx. 6800 mm * LED rear lights * Unladen weight: 4,600 kg * 2x shunting couplings at the rear * Crane grapple at the front with 20 mm wire rope * Four welded lashing rings per side * Towing eye ø 40 mm - optionally ø 50 mm * EBS brake system with roll stability program _____ PAVIC HTA 27 68E 3-axle short timber trailer with single tires: * Bolster body * Trailer with 6 OPTIPA SL steel loading bolsters and 12 OPTIPA AL10 stakes, also available with 4 OPTIPA SL steel loading bolsters and 8 OPTIPA AL10 stakes * Technically permissible gross vehicle weight: 27,000 kg * Turntable with double ball bearing row, max. allowable axial load 20 tonnes * 3 x 9t off-road axles, type BPW, leaf-sprung, single tires with drum brakes * The trailer is equipped with 6 branded tires, size 385/55 R 22.5 * Spare wheel 385/55 R 22.5 * Alcoa Durabright alloy wheels available at extra charge * Telescopic drawbar, height adjustment by 2 draw springs * Axle reinforcement for off-road applications * Six welded lashing rings per side * Crane grapple at the front with 20 mm wire rope * 2x shunting couplings at the rear * Flat sheet metal cover between longitudinal beams, fully welded * LED work lights Financing / hire purchase, as well as leasing / partial amortization leasing, are possible through our leasing partner. Our sales team will be pleased to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, moč: 420 kW (571,04 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, IVECO X-WAY chassis for timber body installations, available in various paint finishes (white, black, red, green) Vehicles available immediately, in stock! * Cursor 13 engine, 570 HP, Euro VI * 12-speed HiTroniX automated transmission * Retarder/Intarder for ZF transmission * Wheelbase: 4,500 mm * Suspension: leaf/air * Tyres: 385/65 R22.5 - 315/80 R22.5 * Trailer coupling, Ringfeder brand * Fuel tank: 710 liters, AdBlue tank: 80 liters * Front LED headlights, LED rear lights * Active Space large-capacity cab * Electrically operated cab tilt, with remote control at the front of the vehicle * Electrically operated roof hatch * Fully automatic air conditioning in combination with auxiliary air conditioning * 2 bunks * Premium refrigerator with freezer compartment including thermal insulation box, 2x USB sockets, 1x 230V socket * Driver's seat: Hi-Comfort, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, three-stage cooling or heating function * Luxury passenger seat: rotatable, multi-adjustable, air-suspended, armrests, integrated headrest and seat belt, heated, with lumbar support * Axle load display in instrument cluster * Hill Start Assist (Hill Holder) for comfortable hill starts * Lane Departure Warning System (LDWS) * Advanced Emergency Braking System (AEBS) * and much more. Additionally available with the chassis: Body: PAVIC OPTIPA short timber steel body with aluminum front wall and 4 OPTIPA SL bunk frames with 8 OPTIPA AL10 aluminum stakes. Loading crane: TajfunLIV 120Z 9.6, TajfunLIV 150Z 9.6 (each also available with cabin), Epsilon M12Z Classic 10.5, Epsilon Q150 Z 9.6 Financing / hire purchase as well as leasing / partial amortization leasing possible with our leasing partner. Chjdpfx Afoxnn Aaeqef For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, moč: 353 kW (479,95 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 5-073----! ! ! IMMEDIATE AVAILABILITY ! ! ! MAN TGS 26.480 BUILDING MATERIALS TRUCK WITH REAR-MOUNTED LOADING CRANE (FASSI or PALFINGER) 520 HP variant also in stock as an option!!! Vehicle Specifications: • Platform body with crane • MAN diesel engine type 02676 LFAI, 480 hp, 2,400 Nm torque, Euro 6e compliant • MAN TipMatic 12.26 DD automatic gearbox with Retarder 35 • Eco retarder, speed-dependent, multi-stage, energy efficient • MAN EVBec high-performance engine brake, multi-stage Csdpfxoxnnzij Afqohf • Drive 6x2-4 • Suspension type: leaf/air (BL) • Main wheelbase: 4,800 mm; wheelbase between rear axle and trailing axle: 1,350 mm • Fuel tank: 590 l capacity; AdBlue tank: 60 l capacity • Trailing axle steered and liftable • RINGFEDER coupling type 4040/G150B • NN cab: the practical solution (narrow, medium length, standard height) • Refrigerator • Air-suspended comfort driver's seat with lumbar support and adjustable shoulder section • Electrically operated glass sunroof • Electrically operated front windscreen sunblind (interior) • LED lighting • MAN EasyControl control panel with 2 functions, operable from outside when door is open • MAN Media System Navigation Advanced 7-inch • MAN Sound System Advanced • Smartphone integration • MAN SmartSelect infotainment control with touchpad and direct access buttons • Lane Departure Warning (LDW) • MAN AttentionGuard fatigue warning • Emergency Brake Assist (EBA) • Standard drive line warranty extension for the 3rd year, up to 450,000 km (see maintenance record for T&Cs) • And much more Body Structure: Platform body: dimensions 6600 x 2480 x 1000 mm, side boards split once (2 flaps) per side, with drop side relief • Floor plate standard: bonded Finnish multi-ply wood, 30 mm thick, screwed to external frame (perforated at 45°) and cross beams. Edges are sealed against moisture ingress. • Central lashing rail, longitudinally recessed • 4 work lights • Toolbox PK 22002-EH? PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED LOADING CRANE • Lifting moment: 205.0 kNm (20.9 mt) • Classification HC1 HD4/B3 according to EN12999 • Fast extension system with regenerative oil return and internal oil feed-through • Double linkage with Power Link Plus, 15° • Slewing mechanism with slew cylinders • Slewing range: 400° • Electronic HPLS controller (for two pressure ranges) • Individual outrigger control with unlockable check valves on support cylinders • Spiral hose from base frame to main boom • Spirit level on both control stations • Stock available with 4-stage and 6-stage extension Or Fassi F235 Loader Crane: • F235A.2 e-dynamic • Lifting capacity: 1,345 kg at 12.7 m or 740 kg at 17.1 m • Slewing range: 400° • Double linkage system with PROLINK (knuckle boom can be angled up to 15°) • Electronic overload protection with FX500 • Fassi RCS maxi radio remote – 6 functions with 3 joysticks (2-2-2) • Emergency stop and optical warning (at 90% and 100%) including digitally adjustable slew limiter • FASSI Stability Control FSC incl. LMB II • Control unit for 2 auxiliary functions with 2 hose guides/e-dynamic • Stock available with 4-stage and 6-stage extension Financing / hire-purchase, as well as leasing / partial amortisation leasing are possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.