Aluminij Pladenj nakup rabljenega (721)

Stanje: novo, premer žaginega lista: 550 mm, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Minimal lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop Itjdpfx Afsrh Dkys Teb - Blow gun - Protective cover - Documentation - 400V

Stanje: novo, premer žaginega lista: 550 mm, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps Itsdpshzuu Nofx Af Tob - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Stanje: novo, Leto izdelave: 2024, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Itsdpfxeidun Ie Af Teb Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine primarily used for separating profile materials made of cast aluminum, copper, and hard plastics (solid materials to a limited extent). The machine stands out for its user-friendly operation and quick, convenient material changeover. This machine only permits 90° cuts! The saw feed is automatic and activated via push-button; material clamping is achieved by two pneumatically operated vertical and horizontal clamping cylinders respectively. Standard equipment includes a minimal quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, marking laser, and pneumatic hood lifting system. Equipment Features - Large support table, high-performance drive motor - Two-button control to initiate the cutting cycle (optionally also available with one-button control) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material back gauge can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimal quantity lubrication system with 2-liter reservoir Iodpfx Afjpa Nxde Tstb - Adjustable blade and feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the start button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. After the cycle is complete, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Technical data regarding cutting range, performance, etc. (see data sheet in email attachment). Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profiles and solid materials made from aluminium castings, copper, and hard plastics. Automatic feed and automatic cutting movement make the machine ideal for fast and precise series production! The material feed is up to 700 mm per stroke. Multiple strokes, and therefore longer cut lengths, can easily be set using the operator panel. The main clamping vice secures the material using two horizontal and two vertical clamping cylinders, while the material feed is clamped using one horizontal and one vertical clamping cylinder. Cutting and feed speeds can be adjusted to suit the material via the large and clearly laid-out operator panel! The machine comes equipped with a mechanical lift height adjustment; the maximum cutting height is 100 mm. A large protective hood covers the entire working area and can be raised pneumatically at the touch of a button! An air blow gun for cleaning the machine is supplied as standard with the UK 350 A 90° CNC + drilling unit! Connections for a chip extraction system are provided. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Features: • 90° cutting machine with powerful drive motor • CNC control; number of pieces and cut lengths easily programmable via the large, clear operator panel • Storage for up to 20 cutting programs • Feed driven by servo motor, single feed 700 mm (for longer parts, feed advances automatically to the desired length) • Main clamping vice with 4 pneumatic clamping cylinders, 2 horizontal, 2 vertical • Feed clamping vice with horizontal and vertical pneumatic clamping cylinders • Large safety hood covers the entire work area, pneumatically operated • Adjustable cutting and feed speeds Iedpfskqz H Dsx Af Tjtb • Max. cutting height 100 mm • Air gun for cleaning the machine • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with a tool holder • Adjustment of spindle speed, drilling depth, etc. via machine control, drilling cycle operates automatically Technical data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade dimensions: 350 x 32 mm Material feed, single stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). This machine is characterized by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P offers an infinitely adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button; material clamping is managed by two pneumatically controlled vertical clamping cylinders. Standard features include a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are available on this machine. Features - Manual saw blade guidance - Double mitre: 30° – 90° – 0°, large support table - Powerful drive motor - User-friendly control panel - Two vertical pneumatic clamping cylinders - Fixed material stop jaw (can be moved backwards to increase cutting capacity) - Large protective cover completely enclosing the work area - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade ø 350 mm Workflow 1) Set the cutting angle 2) Insert the material 3) Move the clamping cylinders to within 20 mm of the material 4) Pneumatic clamping of the material Itodpfx Asidunvjf Tob 5) Press the start button to activate the saw blade 6) Perform the cut manually using the hand lever 7) After the cut, switch off the machine! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator Itsdjgwt Rvopfx Af Tob • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Leto izdelave: 2023, Stanje: novo, The semi-automatic circular saw UK 500 HA is an upcut machine primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (solid materials to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple miter angle adjustment. The UK 500 HA offers an infinitely variable miter range: up to 30° to the left and up to 0° to the right. Saw feed is automatic at the press of a button, while material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. This machine comes standard with a minimum-quantity lubrication system and an air blow gun for cleaning the machine. The unit is also equipped with connections for a chip extraction system. Features • Precision under-table circular saw • Infinitely adjustable miter settings: 0º/45º/90º/ -45º/ -60º • Includes 2 pneumatic vertical clamps Ijdogwt R Depfx Af Tetb • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device with connection for extraction system • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Maximum cutting height: 180 mm • Saw blade: 500 mm • Saw blade not included in delivery! You are welcome to inspect the equipment at any time in our production or demonstration hall. Please feel free to contact us to arrange a viewing.

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning Iedpfx Afopa Nxas Tetb - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminium Circular Saw UK 650 HA, Semi-Automatic Ijdpfsidun Djx Af Tjtb The semi-automatic circular saw UK 650 HA is an "upcut" machine, primarily used for cutting profile materials made of aluminium casting, copper, and hard plastics (with limitations for solid materials). The machine is characterized by simple operation, quick and convenient material change, and easy mitre angle adjustment. The UK 650 HA features a continuously adjustable mitre range up to 20° to the left and right (swivel range twice 70°). Saw feed is automatic via push button, with material clamping provided by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for chip extraction systems are available on this machine. Optionally, the machine can also be equipped with a digital mitre angle display, a marking laser, and pneumatic lifting for the safety guard. Equipment - Double mitre 20° – 90° – 20°, large support table - Powerful drive motor - Two-button operation to initiate the cutting process (optional single-button operation available) - User-friendly control panel - Adjustable blade and feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved backwards to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Work process 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the start button to make the machine ready for operation. 7. Press and hold both SAW buttons, material will be cut. 8. Upon completion of the cycle, release both SAW buttons and press the STOP button. 9. Open the clamping stock and remove or advance the material. You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Leto izdelave: 2023, Stanje: novo, The semi-automatic circular saw UK 352 HA is an upcut saw primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine stands out due to its easy operation, quick and convenient material changeover, and straightforward adjustment of the mitre angle. The UK 352 HA features a continuously adjustable mitre range from 45° to the left to 0° to the right. The saw feed is fully automatic, activated via push button; material clamping is performed by two pneumatically controlled vertical clamping cylinders. As standard, this machine comes with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Features • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right 45º • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed Iedpfjgwt Rysx Af Tstb • Two-hand safety control • Adjustable rear material stop • Chip extraction interface for dust collection system • Mist spray system for air-oil cooling • Air blow gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Maximum cutting height: 125 mm • Saw blade diameter: 350 mm • Saw blade not included in the scope of delivery!

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK 352 HA is an up-cut machine predominantly used for cutting profile materials made of aluminium castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterised by its user-friendly operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range from 45° to the left and 0° to the right. Saw feed is automatic via push button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are available on this machine. Equipment: • Precision underfloor circular saw • Mitre adjustment: 45° left / 90° centre / 45° right • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop Itedogwt Rrepfx Af Teb • Extraction unit for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom facility. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an "upcut" machine primarily used for single cuts in aluminum and copper profiles as well as hard plastics (including limited solid materials). The machine is distinguished by its straightforward operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 352 M features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is performed manually using a hand lever, with manual clamping of the material. Equipment - Double mitre 45° – 90° – 0° - Large support table - High-performance drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop can be moved to the rear to increase cutting capacity - Large safety guard covering the entire working area - Saw blade ø 350 mm Work Process 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to run the saw blade 5) Perform the cutting operation manually with the hand lever 6) After finishing the cut, turn the machine off! Iedpfxoidunns Af Tstb You are welcome to visit and inspect the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine and is mainly used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials subject to certain conditions). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-600 A offers stepless mitre adjustment to the left and right up to 20° (swivel range twice 70°). Saw feed is automatic at the push of a button, and the material is clamped by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, this machine comes with a minimum quantity lubrication system and an air spray gun for cleaning! Connections for a chip extraction system are available on the machine. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Features • Precision under-table circular saw • Stepless mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device for connection to extraction system Ijdpfegcbwgjx Af Totb • Minimum quantity lubrication device for air-oil cooling • Air spray gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade diameter 600mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our manufacturing/showroom. Feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Product innovation: Sawing System Type "ORIX" This sawing system allows for fully automatic processing of a wide variety of aluminium profiles. The machine features a robust base frame. For positioning the saw unit, linear guides and precision carriages are used. The drives are equipped with servo motors. For sawing, the saw unit travels 300 mm forward on the Y-axis, making it easy to cut special profiles, plates, as well as Item and Bosch profiles. The support table is equipped with movable rollers, which automatically position themselves according to the cut length. All rollers are also mounted on precision carriages. Additionally, the saw system has a sturdy discharge table for placing the cut aluminium parts. (Optionally, the sawn parts can be directly transported away via a conveyor belt, including chips.) The machine is available with a 6,000 mm cutting length, resulting in a total length of 7,000 mm. The saw system comes with a suitable 2-channel minimum quantity lubrication system. The machine will also be delivered with a 400 mm or 600 mm saw blade. Iedpfx Aefu Tgrsf Tjtb Your benefits: • Virtually scratch-free as the material does not slide over a cast table • Improved chip disposal (no extraction required) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller offcut (50 mm remnant length) • Safe operation (light curtain) • Easy disposal of material (conveyor belt or table with brushes) • No reset required as with standard automatic saws • No dimensional losses • Plug-in rollers that securely accommodate any type of special profile, ensuring a perfect cut Work process Enter the profile length via the control system. The saw unit then moves to the specified length. The operator loads the aluminium profile and starts the saw. Using a head cut detection sensor, the saw locates the head cut position and performs the initial cut. After the cut, the saw unit returns and repositions for the next programmed coordinate, then cuts the aluminum profile again. These steps are repeated until the profile is completely cut. All sawn pieces are gently placed on the discharge table or on the conveyor belt to protect the material. The material is clamped directly on the saw unit using vertical and horizontal clamps, as with conventional aluminium saws. After the aluminium profile is cut, the saw unit automatically returns to the next feed position. The process can then be repeated. As an option, cross conveyors for automated feeding can be integrated. For safety, fences or a light curtain can be installed. Two different control options are available: 1) Diethei control system, 2) Siemens control system. Optional material sorting into various containers or by different lengths is also possible. You are welcome to view the desired system at any time in our production or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials possible to a limited extent). The machine is characterized by simple operation, quick and convenient material change, and easy mitre angle adjustment. The UK-400 A offers an infinitely adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is activated automatically at the push of a button, while material clamping is achieved via two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimum quantity lubrication system and an air spray gun for machine cleaning. Connections for a chip extraction system are provided. Additionally, this machine can be optionally fitted with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment • Precision under-table circular saw • Infinitely adjustable mitre adjustment 0º/ 45º/ 90º/ -45º / -60º Iodpsgwt Rnsfx Af Tetb • Includes 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air gun with coiled hose • Maintenance unit with pressure reducer included • Ergonomically arranged operator panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: nepreverjeno, premer žaginega lista: 400 mm, največja višina reza: 120 mm, Avtomatska krožna žaga za aluminij. Naprava za poševno rezanje in transporter za ostružke. Obseg reza okroglo približno 120 mm. Stroj izhaja iz odkupa, ni bil preizkušen. Po navedbah našega kupca je deloval do zadnjega. Ker funkcionalnega preizkusa nismo izvedli, je prodaja izključena iz kakršnega koli jamstva, vračilo ni mogoče. Itodjxlcd Hspfx Af Teb

Stanje: novo, - Semi-automatic - Saw blade 600 mm - Double mitre - 4 pneumatic clamps - Misting lubrication system - 300 cm roller conveyor with length stop - Blow gun - Automatic safety cover - Documentation - 400V Isdjgg Rdcepfx Af Tetb

Stanje: dober (rabljeno), premer žaginega lista: 350 mm, – Saw blade 350 mm Iodpounh H Eefx Af Tstb – Double mitre – Hydrocheck system – Protective cover – Mist lubrication system – 400V

Stanje: dober (rabljeno), premer žaginega lista: 400 mm, - Double mitre - Mist lubrication system Isdpfsim Ezgex Af Tetb - Protective cap - 400V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, premer žaginega lista: 400 mm, - Semi-automatic - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system Isdpfeqy A Rkox Af Totb - Blow gun - Protective cover - Documentation - 400V

Stanje: rabljeno, Aluminijasti silos za sipke materiale. Silos je bil uporabljen v proizvodni hali, zato je njegov zgornji del odrezan. Prostornina približno 25.000 l. Silos je trenutno demontiran in pripravljen za transport. Zgornji del silosa je mogoče po želji ponovno zavariti ali prilagoditi potrebam kupca. Rezervoar ima stožčasto dno s polžnim transporterjem. Višina: cca 9 m Iedpfx Ajwcdqfsf Tjtb Premer: 2,2 m Prostornina: cca 25.000 l

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.900 kg, skupna višina: 25.000 mm, skupna dolžina: 2.710 mm, skupna širina: 1.040 mm, vhodna napetost: 400 V, We offer a powerful, slow-speed twin-shaft shredder specifically designed for the efficient and precise processing of aluminium, including: 🔹 Rods 🔹 Stranded wires 🔹 Wires 🔹 Flat stock 🔹 Cables The specially engineered shredding system prevents material from being pulled or crushed—aluminium is efficiently cut, not compressed. The knife system ensures clean and precise cuts, preventing vertically fed material from passing through the chamber unprocessed. The blades are manufactured from certified, wear-resistant steel. The shredder is equipped with geared motors from a renowned manufacturer. Available motor options: 2 × 18.5 kW or 2 × 22 kW. Fraction size – configurable to customer requirements. Model RS8: working shaft length 600 mm – identical construction to the RS800 and RS1200 models. Made in Poland. Ijdpfx Afjtvdcye Totb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, - Double miter circular saw ADS Type M Itodpeucuhdjfx Af Tjb - 2 saw heads - Max. cutting length 5000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance sawing machine with fully automatic operation * Very high cutting precision Itjdpfx Afjw D T Uis Teb * Short cycle times * Low-burr sawing * High reliability * Low maintenance requirements Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Cutting of corner connectors. Very well-maintained, ready-to-operate used condition. Technical data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversal possible - Cut length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on cut length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feeder - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.