Agie Challenge 3 nakup rabljenega (117)

Stanje: rabljeno, Leto izdelave: 2007, Sinker EDM machines / Electrical Discharge Machines Travel X: 350 mm Travel Y: 250 mm Todevt Sykspfx Abgsf Travel Z: 350 mm Table size X: 600 mm Table size Y: 450 mm Max. workpiece size X: 650 mm Max. workpiece size Y: 420 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 400 kg Chiller

Stanje: rabljeno, Table length 400 mm Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Tsdpfovwgq Sjx Abgof Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: pripravljen za uporabo (rabljen), AGIE PMO-02 A2 Power Module Output 614030.5, Serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as per photos. Tedpfoi D Txfox Abgef

Stanje: dober (rabljeno), Leto izdelave: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis travel: 350 mm. Y-axis travel: 250 mm. Z-axis travel: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Todeu Tq Hwopfx Abgsf Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm x H 2305 mm. Machine weight: approx. 2,600 kg.

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Tedpfx Abowzyr Asgsf Z 220 mm U 350 mm V 220 mm Year of manufacture 2008

Stanje: rabljeno, Leto izdelave: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm Tedpfswtr Dzsx Abgjf Workpiece size 750 x 550 x 256 mm Operating hours 29,559 h EDM hours 29,559 h

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting speed for cylindrical cuts: 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Including AGIE universal clamping frame Including AGIE JOGGER handbox Including console with 4x USB ports Tedjwwr H Rjpfx Abgof Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. Commissioning and training services are also available upon request.

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 11 [kVA] Tedjuhq Rlspfx Abgef WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Stanje: pripravljen za uporabo (rabljen), AGIE 622064.4 gonilnik za koračni motor Isotorque MJG2129E, serijska številka po fotografiji, rabljen, z manjšimi sledmi uporabe, 100 % delujoč, obseg dobave glede na slike. Tedpfji D Tvgox Abgof

Stanje: dober (rabljeno), Leto izdelave: 1997, Die Maschine ist in gutem Zustand. Tjdpfxjpy Erre Abgof

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), X-os: 400 mm, Y-os: 250 mm, Z-os: 256 mm, največja teža obdelovanca: 400 kg, največje mere obdelovanca: 580x860x250 mm, površina za odlaganje: 680x500 mm, minimalni začetni premer vrtanja: 2 mm, hitrost rezanja: 185 mm²/min, generator: Agiplus-MMD, krmiljenje: Agimatic CF20. Z napravo za pripravo dielektrika DA-15/C. Napajalnik prikazovalnika je v okvari. Stroj je že demontiran, možen je ogled na lokaciji. Tedjw Sxx Ijpfx Abgof

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Heidenhain iTNC 530, Delovno območje X 600 x Y 450 x Z 450 mm Todpfx Abow Hxzmsgef Vpenjalno mesto vretena CAT40, Avtomatska menjava orodij s 24 pozicijami, Vreteno s 20.000 obr./min Teža stroja 6.100 kg, Priključna moč 16 kW Pred-varovalka 32 A Obratovalna napetost 400 V, 50/60 Hz

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 450 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, skupna višina: 2.220 mm, skupna dolžina: 1.640 mm, skupna širina: 2.040 mm, višina obdelovanca (maks.): 250 mm, širina obdelovanca (maks.): 750 mm, dolžina obdelovanca (maks.): 550 mm, lastna masa: 2.580 kg, Oprema: dokumentacija / priročnik, AGIECUT Progress 2 Year of manufacture: 2004 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged cutting machine with automatic wire threading and automatic re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup AGIE IPG generator with power module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Upon receipt of order, our machines are cleaned and fully overhauled. Afterwards, a test cut with optimal surface finish is carried out for approval. We are pleased to offer on-site commissioning and training. Optional: Tsdowvqk Sopfx Abgof - Transport - Chiller unit - Clamping devices

Stanje: rabljeno, TECHNICAL DATA - Travel X x Y x Z: 350 x 250 x 350 mm - Max. workpiece dimensions: 650 x 580 x 250 mm - Max. workpiece weight: 400 kg - Machining capacity: 72 A - Tool magazine capacity: 28 - Dielectric volume: 415 l - Machine footprint: 2,689 x 1,855 mm - Machine height: 2,593 mm - Machine weight: 3,000 kg - EDM operating hours: 39,554 h Tedouhcbiopfx Abgof EQUIPMENT/ACCESSORIES - CNC AGIEVISION with 10.4'' color LCD screen - Electronically shifted handwheel - C-axis - Spindle chuck: EROWA - Automatically retractable tank - Integrated filtration: DAI 2

Stanje: pripravljen za uporabo (rabljen), AGIE Isotorque Driver 622064.4, serijska številka po fotografiji, rabljeno, v dobrem stanju, 100% delujoče, obseg dobave po fotografijah Tedpei D Twasfx Abgsf

Leto izdelave: 2011, Stanje: dober (rabljeno), Dodatna oprema ni vključena. Tjdpfx Abspxnwzogof

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Axes X/Y/Z: 350mm/250mm/350mm, Workpiece dimensions X/Y/Z: 650mm/580mm/250mm, Max. workpiece weight: 100kg. Internal dimensions of working tank: 860mm/620mm/360mm, Rotation: 60rpm, Capacity: 415L, Filtration quality: 3μm-5μm. Machine dimensions X/Y/Z: 2689mm/1855mm/2593mm, Net weight: approx. 3200kg, Filled weight: approx. 4200kg, Control unit: AgieVision. Documentation available. Tsdpfx Abor Nd Enogsf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 33.995 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 525 mm, višina obdelovanca (maks.): 510 mm, širina obdelovanca (maks.): 1.000 mm, dolžina obdelovanca (maks.): 1.300 mm, Wire EDM machine has been recently serviced and cleaned! TECHNICAL DETAILS Travel X axis: 800 mm Travel Y axis: 550 mm Travel Z axis: 525 mm Workpiece dimensions Workpiece height: max. 510 mm Workpiece width: max. 1,000 mm Workpiece length: max. 1,300 mm MACHINE DETAILS Type of mains power: Three-phase current Total weight: 6,800 kg Operating hours Tsdewzhqmjpfx Abgjf Power-on hours: 108,824 h Cutting hours: 33,995 h

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Tedpfov Hbygex Abgjf Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered upon request.

Stanje: rabljeno, TEHNIČNI PODATKI - Hodi X/Y/Z osi: 400 x 300 x 350 [mm] - Hitrost hitrega pomika (X/Y/Z): 6 / 6 / 15 [m/min] - Min./maks. razdalja med mizo in vpenjalom: 170 / 520 [mm] - Največje dimenzije obdelovanca: 820 x 580 x 250 [mm] - Največja teža kosa: 800 [kg] - Največja teža elektrode: 50 [kg] - C os: 0 - 100 [vrt/min] Todpfx Abjwl Rh Nsgjf ELEKTRIČNA NAPAJANJE - Napajalna napetost: 400 [V] - Skupna priključna moč: 9,1 [kVA] TEŽA IN DIMENZIJE - Potreben prostor: 4.700 x 2.750 [mm] - Višina stroja: 2.680 [mm] - Teža stroja: 3.830 [kg] - Obratovalne ure: 13.659 [h] OPREMA - Krmiljenje: AGIEVISION 5 - Robot za nakladanje/razkladanje obdelovancev - Vpenjalna glava: EROWA - Dielektrična kapaciteta: 600 [l]

Stanje: pripravljen za uporabo (rabljen), Agie MJG 2129 D gonilnik za koračni motor. 622064.4, rabljen, z manjšimi sledovi uporabe, 100% delujoč, dobava po slikah. Todoi D Twzopfx Abgef

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A start hole drilling machine by Agie for the EDM industry is available. Travel range X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm–3mm, maximum drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, maximum workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Todeu Ilbujpfx Abgef

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, širina mize: 400 mm, dolžina mize: 600 mm, TECHNICAL DETAILS Travel paths X / Y / Z axes: 400 x 300 x 350 mm Positioning speed X / Y / Z axes: 6 / 6 / 15 m/min Positioning speed in manual mode X / Y / Z axes: 2 m/min Acceleration Z axis: 10.0 m/s² Resolution X / Y / Z axes: 0.1 µm Laser compensation X / Y / Z axes: Linearity / Angle / Spindle pitch Integrated C-Axis Max. electrode weight: 50 kg Tsdpfevuqmfjx Abgof Rotation speed: 0 - 100 g/min Max. moment of inertia: 5,000 kg cm² Max. operating current: 140 A (in rotary mode) Max. operating current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: dielectric / water heat exchanger Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control system Operating system: Windows XP Data input: 15" LCD display, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with grid pattern: hole spacing 50 mm Distance table – chuck: 170 - 520 mm Distance floor – clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work tank dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece size: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed Air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at 6 bar during work tank filling (approx. 40 s duration) Connection: hose coupling Ø 13 mm Cooling Water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and Environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINE DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 pc heat exchanger for control cabinet, integrated. 1 pc heat exchanger for dielectric, integrated.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Todpfxov Dkvre Abgjf Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Stanje: pripravljen za uporabo (rabljen), Agie MJG 2119 A Zch 615072.6 + gonilnik za koračni motor REX MJG 2113 A 629753.5, rabljeno, normalne sledi uporabe, 100 % delujoče Tedpei D Twwofx Abgsf