2 Osi Obesek nakup rabljenega (82.788)

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 10.000 mm, skupna širina: 3.000 mm, skupna višina: 1.105 mm, barva: modra, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces within in-house transport operations. Multiple trailer operation: The trailer components are not intended (without a trailer coupling) for multi-trailer operation. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections Loading platform: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, platform decked with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles; drawbar can be raised, removed, and swapped from front to rear; hitch height on towing vehicle approx. 650 mm (alternative heights permitted only upon notification); towing eye according to DIN 74054, diameter 40 mm; track rods with adjustable ball joint heads, diagonal or towing rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock according to UVV. Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even load distribution on the wheels; wheels with solid rubber cushion tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and lifetime lubrication. Iedpfxexrr Uho Abxjic Paintwork: Finish coat RAL 5002 ultramarine blue For rent or sale EU-wide.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 1.012 mm, barva: modra, Operating Conditions: The heavy-duty trailer is designed for use on level, paved surfaces for in-plant transportation. Train Operation: The trailer components are not (without a trailer coupling) designed for operation in combination with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or strip loads are permitted only upon notification. Main Frame: Robust welded construction made of section steel profiles. Loading Platform: Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covered with softwood planks, all-round recessed edge protection. Iodpfx Aouf Rw Tobxsic Steering: All-wheel steering on 4 pendulum axles, towing bar can be raised, removed, and attached from front to rear. Hitching height on towing vehicle approx. 650 mm (other hitching heights only permitted upon notification), towing eye as per DIN 74054, diameter 40 mm. Track rods with adjustable ball joint heads, diagonal or tie rods adjustable and fitted with maintenance-free joint bearings. Drawbar drop safety as per accident prevention regulations (UVV). Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even wheel load distribution, wheels with solid rubber tyres approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Finish: Top coat in RAL 5002 Ultramarine Blue. Additional Equipment: - Optional: Two-line compressed air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded actuators, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made of round steel welded horizontally into the outer frame members; use of crane eyes only when the trailer is not loaded. - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Towing bar length approx. 1500 mm Rental or sale EU-wide.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 5.000 mm, skupna širina: 2.400 mm, skupna višina: 930 mm, barva: modra, Operating Conditions: The trailer is designed for use on level and paved surfaces in internal company transport (in-plant traffic). Towing Vehicle (Type): unknown Transported Goods: unknown Multiple Trailer Operation: The trailer components (without trailer coupling) are not designed for combined operation with multiple trailers. Payload: 40 t at 6 km/h with uniform load distribution (surface load) over the platform between the axles. Point or line loads are only permissible upon notification. Main Frame: robust welded construction made from section steel Platform: approximately 5000 x 2400 mm, loading height 930 mm, platform covering with wooden planks, continuous edge protection Steering: all-wheel steering on 4 pendulum axles, drawbar can be raised, removed, and swapped from front to back; coupling height on towing vehicle approx. 670 mm (other heights only permissible upon notification); towing eye as per DIN 74054, diameter 40 mm; tie rods with adjustable ball-joint heads; diagonal or draw rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock per accident prevention regulations (UVV) Chassis: 4 steered pendulum axles (2 steered axle lines) to ensure even wheel load distribution, wheels with solid elastic rubber tyres approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultra marine blue Additional Equipment: 2 securing stakes each on the longitudinal sides Iisdpfxjxrtluo Abxjc Rental or sale EU-wide.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 247580, 247422, Tip: P140/9/SG51/1K/RT45 Moč: 9,8 kW Maksimalna delovna temperatura: 140 °C Medij: voda Tlačna temperirna naprava Na voljo dva kosa Cena: 950 EUR na kos Iiodpfx Absy Agh Hexec

Stanje: dober (rabljeno), Leto izdelave: 2021, Offer 23053 Technical Data: - Load capacity per roller block: 2,000 kg - Roller dimensions: Ø 60 x 100 mm - 8 support rollers Iodpfxjrl Iyno Abxeic - Hydraulic lifting device stroke: 50 mm - Lifting device must be operated by a separate hydraulic power unit; hydraulic power unit and connecting hoses are not included - Space requirement: approx. W 800 x H 350 x D 600 mm - Weight (each): approx. 180 kg

Stanje: dober (rabljeno), Clip-on holders, standard holders and accessories, SASSEX spiral drill knives, Sassex spiral boring knives, counterboring knives, Sassex counterbores, Sassex holders, tool holders, mount for drill knives, spiral drills - Clip-on holders: tool mounts, 2 pieces Ijdpfx Abouhr Raoxsic - Mount: MK4 - Length: 380 mm - Dimensions: see photos - Sale/Price: as a complete set - Transport dimensions: 380/100/H30 mm - Weight: 3.2 kg

Stanje: rabljeno, Leto izdelave: 2013, Overview This wire hood applicator was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale as production at the plant ceased in 2022. Operator platforms are included in the scope of delivery. Technical data - Capacity: 9,000 bph to 12,000 bph - Formats: Cork closures for cider and sparkling wine bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Iijdswhk Dvopfx Abxjc Scope of delivery - Wire hood applicator - Operator platforms

Stanje: rabljeno, Collet chuck, tool holder, tool holder, milling arbor, milling tool - Manufacturer: Clarkson, 2 collet chucks - Type: Autolock - Taper: SK50 - Collets: Ø 25/16 mm - Cutter diameter: Ø 44 / 11.5 mm - Price: complete package Ijdpfxogkw Hue Abxsic - Overall dimensions: 175/285/100 mm - Total weight: 9.2 kg

Stanje: rabljeno, Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: height adjustable -Dimensions each: 515/300/H785 mm Iiodpfx Abjhqnb Hoxoc -Transport dimensions: 840/540/H310 mm -Total weight: 56 kg

Stanje: rabljeno, Tool holder, milling holder, milling tool Iisdpfxjc U Tzro Abxsc - Adapter - Taper: SK50 - Tool mount: Ø 32 mm - Quantity: 2 holders available - Sale: only as a complete set - Total length: mm - Weight: 6.5 kg

Stanje: dober (rabljeno), Grinding wheel mountings, standard flanges, special flanges, grinding wheel flange - Grinding wheel mounting: with grinding stone, 2 pieces - Mounting: bore shaft cone Ø 50-60 mm Iiodpfxow Dpc Ao Abxsc - Grinding wheel: Ø 225 x 40 mm - Delivery/price: complete - Each dimension: Ø 225 x 90 mm - Weight: 10.4 kg/piece

Stanje: dober (rabljeno), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: with grinding stone, 2 pieces - Mounting: bore shaft cone Ø 44-55 mm - Grinding wheel: Ø 270 mm, see photos - Sale/Price: complete - Dimensions each: Ø 270 x 80 mm Iijdpjw Dphlsfx Abxoc - Weight: 9.7 kg/piece

Stanje: dober (rabljeno), Nosilec orodja, nosilec rezkarja, rezkalno orodje - Količina: 2x nosilca SK50 - Različne izvedbe Iiodpfod I Tmyex Abxjc - Cena/prodaja: samo kot komplet - Teža: 12 kg

Stanje: dober (rabljeno), Nosilec, držalo, podporni blok, podporni element - Nosilec: masivna izvedba, 2 kosa - Sprejemnik: Ø 48 mm - Montažne luknje: razmak med luknjami 165 x 40 mm / Ø 25 mm - Cena/prodaja: kompletno - Dimenzije: 205/80/višina 370 mm Iiodpfx Abolry S Hoxoc - Teža: 50 kg

Stanje: dober (rabljeno), Turning tool with indexable inserts, clamping holder, lathe tool, indexable insert tool holder, tool blank, indexable insert steel Iiodpfxsb A Hf No Abxoc -Length: 300/230 mm -Height: 35 mm -Weight: 4 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 3.100 mm, širina transportnega traku: 600 mm, Length 310 cm Width 60 cm Iodperl Rdfsfx Abxoic Height of beams 3 cm Two pieces available Price: 1400 EUR each 10% discount when purchasing both!!!

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 14/804766, À vendre Pont roulant suspendu monopoutre Abus d’occasion 5000mm x 2x 500 kg. Nous pouvons éventuellement livrer les ponts roulants avec : * Montage et inspection * Rails conducteurs Isdpfxouviqhe Abxjic * Commande radio * Commandes maître-maître en tandem Jan Reiling B.V. propose également des ponts roulants neufs, entièrement sur mesure, à des prix très compétitifs. * Ponts roulants bipoutre * Ponts suspendus * Potences * Ponts sur rails KBK * Élévateurs à bateaux Tous nos ponts roulants neufs et d’occasion que nous installons sont fournis avec garantie ! De plus, nous disposons d’un stock propre d’environ 15 000 pièces détachées Demag. Pour plus d’informations, consultez le site de Jan Reiling B.V. Ponts roulants, grue, pont roulant, grue d’atelier, grue de magasin, palan, krane, pont roulant de hall, pont roulant de hall, grue d’atelier, grue d’entrepôt, appareil de levage, cranes, grue universelle, palan. Pont roulant bipoutre, laufkrane, overhead crane. Monopoutre, einträger, single girder. Palan à chaîne, kettenzüge, chain hoists.

Stanje: rabljeno, Ta oglas je za Eppendorf Charger Shell 2 nosilec pipet - E3116.000.05 ENOJEN Iiedpfx Absxv Dixsxec Enota je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo Splošni opis Imejte vse svoje Eppendorf pipete vedno pri roki in prihranite dragocen prostor na laboratorijski mizi. Sistem nosilcev za pipete Eppendorf ponuja zelo prilagodljive možnosti shranjevanja za različne potrebe laboratorija. Pokončna postavitev omogoča, da konice pipet ne pridejo v stik z delovno površino, kar zmanjšuje tveganje poškodbe ali navzkrižne kontaminacije. Lastnosti in prednosti Velike gumirane nogice ščitijo osnovo pred politimi tekočinami in povečujejo stabilnost. Jasni piktogrami na vseh ohišjih polnilcev in nosilcih za pipete omogočajo natančno razporeditev in lahko prepoznavo v živahnem laboratorijskem okolju.

Stanje: novo, Leto izdelave: 2024, nosilnost: 3.000 kg, Oprema: nožno daljinsko upravljanje, 3,000 kg load capacity welding positioner, extremely robust design Continuously variable speed control from 0.05 to 0.7 rpm Turntable diameter 1,400 mm Tilting angle up to 120° Height (horizontal) 1,300 mm, height (tilted, to center) 1,050 mm Dimensions: length 2.0 m x width 1.4 m Ijdpfx Aov En U Iobxsic Handheld remote control with digital display and dual foot pedal control

Stanje: novo, nosilnost: 2.500 kg, Special price Swivel range 360°, one side driven, one side idling Height adjustment hydraulic, motorized from 800 to 1200 mm Distance adjustable as required, can be easily modified; center section can be removed (as shown: 2.4 meters) Speed 0.5 rpm Motor power 0.75 kW We offer the machines in various sizes and load capacities: Load capacities: 1 ton, 2 tons, 3 tons, 5 tons Also suitable for conversion without the floor center section Iedstynf Tjpfx Abxjic

Stanje: novo, Leto izdelave: 2025, nosilnost: 500 kg, 3-axis turning and tilting positioners with load capacities of 500, 1000, 2000, and 3000 kg, clamping plate diameters of 0.5, 0.65, 0.8, and 1.0 meters HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Clamping plate diameter: 500 mm Arm radius: 800 mm (boom) Rotation speed: 0.1 – 1 rpm These units have proven themselves in the construction and agricultural machinery sectors, commercial vehicles, material handling equipment, as well as in the aerospace and energy industries. Ideal for welding, assembly, machining, etc. With their stable and robust construction, flexible three-axis positioning (including overhead positions), and user-friendly operation, they make welding, assembling, and handling large workpieces much easier. - Faster production, increased productivity - Optimum workpiece positioning improves weld quality and enables higher deposition rates - Enhanced safety – hazardous crane handling is greatly reduced - Positioning across up to three axes simultaneously, without time-consuming re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility enabled by modular adaptability and customised special designs Basic principle: By positioning the rotating arm axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines offer significantly higher performance compared to turn-tilt tables or rotary-tilting positioners. This principle allows handling of the specified loads in any required position. With infinite rotation of both rotary axes and additional vertical adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm; for models with 2,000 kg and above, 0.05 to 0.6 rpm With wireless remote control Continuous 360° rotation Continuous 360° tilt Lift: 1000 – 1500 mm; from 2 t load capacity: 1250 – 2000 mm Arm outreach up to 1 meter for loads up to 1,000 kg; from 2,000 kg: 1.5 meters Isdpfxsulaxbo Abxeic

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 250 kg, Oprema: žerjav, GEDA INCLINED CONSTRUCTION HOIST COMFORT 250 12M NEW TYPE: GEDA COMFORT, NEW, 2026 model year. Manufacturer: GEDA, Germany Drive: 1.3 kW/230 V/50 Hz Load capacity: max 250 kg Lifting speed: 30 m/min The equipment for a lifting height up to 12 m includes: - Electric motor - End section with pulley - Standard trolley with safety brake - Base rail 2.0 m - Extension 250/2 m x 4 pcs - Extension 250/1 m - Adjustable corner section (20° to 45°) - Universal basket (82 x 35 x 70 cm) +++++ ++ THE GEDA INCLINED HOIST IS ALSO AVAILABLE WITH 200 KG CAPACITY – ‘STANDARD’ MODEL ++ +++++ +++++ REQUEST AN EVEN BETTER OFFER FOR THE GEDA STANDARD 200 +++++ +++++ GEDA IS IDEAL FOR LIFTING SOLAR PANELS +++++ +++ FOR A LIFTING HEIGHT UP TO 14M, ADD ONE MORE 2.0M RAIL ++++ ++++ SPECIAL PROMOTIONAL PRICE FOR 14M: PRICE ON REQUEST +++++ +++ YOU CAN ALSO PURCHASE 10M, 16M, 18M, 20M, ETC. ++++ +++++ +++++ HIGHER GEDA HOIST HEIGHT THAN 21M: +++++ ++++ WITH A 43M CABLE, YOU CAN ASSEMBLE GEDA UP TO MAX. 21M LIFTING HEIGHT +++ +++ JUST PURCHASE ADDITIONAL 2-METER RAILS +++ +++ YOU CAN CHOOSE DIFFERENT LIFTING HEIGHTS—10M, 12M, 16M, 18M, 20M, 22M, 24M, 26M, 28M, ETC. ++++ +++++ THE SHOWN PRICE IS FOR 12M +++++ +++ DEPENDING ON HOW MANY 2-METER RAILS YOU BUY +++ +++ IF YOU NEED A GREATER HEIGHT THAN 21M – WE INSTALL ++ +++++ YOU GET ++FREE++ A LONGER 63M CABLE+++++ +++++ +++++ FROM PROFESSIONALS FOR PROFESSIONALS +++++ Iiodpfx Aexvyagebxec INSTALLATION POSSIBLE ON TERRACES, BALCONIES, FLAT ROOFS, OR WINDOWS, AS WELL AS ON SCAFFOLDING AS A VERTICAL HOIST ++ FOR LIFTING MATERIALS FOR FACADE WORKS ++ +++++ WITH THE GEDA VARIO CONVERSION +++++ +++++ (LEVELING THE BASKET TO HORIZONTAL POSITION) +++++ +++++ YOU GET A VERTICAL HOIST +++++ +++++ THUS, YOU GET 2 HOISTS IN 1 +++++ CERTIFICATE for inclined construction hoist from an authorized company for testing and inspection. +++++ +++ ORIGINAL GEDA INSTALLATION AND OPERATION MANUAL IN CROATIAN +++ +++++ +++ SPECIAL OFFER PRICE GEDA 250 ONLY ++4,900 +++++ +++ SPECIAL OFFER PRICE GEDA 200 ONLY ++4,200 +++++ +++++ 12-MONTH WARRANTY! +++++ +++++ +++++ ALWAYS IN STOCK, READY FOR DELIVERY – MULTIPLE UNITS OF GEDA HOISTS AVAILABLE +++++ +++++ STANDARD 200KG AND COMFORT 250KG +++++ +++++ FOR ANY ADDITIONAL QUESTIONS, OUR TEAM IS AT YOUR SERVICE +++++ IT'S BEST TO CALL US AND FIND OUT WHICH GEDA INCLINED HOIST IS BEST FOR YOUR NEEDS +++++ ++++ WE ARE THE MAIN AUTHORIZED DEALER AND +++++ SERVICE CENTER FOR GEDA ORIGINAL CONSTRUCTION HOISTS IN THE REPUBLIC OF CROATIA FOR OVER 30 YEARS +++++

Stanje: zelo dobro (rabljeno), 🔥 Industrijski aksialni ventilator JOUNING JAF-DA-24 2HP 400V 230 CMM 🔥 Naprodaj visokokakovosten industrijski aksialni ventilator priznane blagovne znamke JOUNING BLOWER CO., LTD. (Tajvan). Iiedsyycdxjpfx Abxoc ✅ Oprema uporabljena le nekajkrat – stanje praktično kot novo ✅ Idealno za hale, skladišča, proizvodnjo, industrijsko prezračevanje ✅ Trdna kovinska konstrukcija – težka, profesionalna oprema 📊 Tehnični podatki: Model: JAF-DA-24 Moč: 2 HP (pribl. 1,5 kW) Napajanje: 400V / 3 faze Obrati: 1400 RPM Pretok zraka: 230 m³/min (~13.800 m³/h) Statični tlak: 38 mmAq Frekvenca: 50 Hz Leto izdelave: 2016 🛠️ Stanje: Občasno uporabljen Tehnično popolnoma brezhiben Vizualno zelo dobro ohranjen – kot na slikah Brez poškodb, pripravljen za uporabo 📦 V kompletu: Ventilator kot na slikah 🚚 Dostava / prevzem: Možna paletna dostava Možen osebni prevzem Nudim pomoč pri organizaciji transporta

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 250 t, širina mize: 1.120 mm, dolžina mize: 800 mm, skupna dolžina: 25.800 mm, skupna širina: 13.500 mm, skupna višina: 29.750 mm, skupna masa: 12.800 kg, vrsta nastavitve višine: mehanski, nastavitev hoda: 140 mm, Oprema: dokumentacija / priročnik, Ekscentrična stiskalnica LE 250C. Leto izdelave: 1989 (ZTS – SLOVAŠKA). Nova krmilna omara po originalni shemi, centralna mazalna črpalka. Največji pritisk: 250 ton. Hod: 30–140 mm. Največje število udarcev na minuto: 45. Nastavljivost kladiva: 110 mm. Največja razdalja kladiva do mize: 450 mm. Površina za vpenjanje kladiva: 800 x 475 mm. Površina za vpenjanje mize: 1120 x 800 mm. Moč motorja: 20 kW. Dimenzije (Višina x Širina x Dolžina): 2975 x 1350 x 2580 mm. Teža: 12.800 kg. Iijdpfx Abotq Eqxexoc

Stanje: rabljeno, Leto izdelave: 2012, Flow rate: 60 l/min Iijdpfjwa Umxjx Abxjc Motor power: 2 kW Speed: 2850 rpm Delivery pressure: 9 bar Dimensions (LxWxH): 2400 x 1060 x 560 mm Overall dimensions: 2400 x 1250 x 1200 mm Unladen weight: 280 kg