Žice Ravnalni Stroj nakup rabljenega (83.952)

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, širina obdelovanca (maks.): 1.050 mm, No reserve price - guaranteed sale to the highest bidder! Condition: Machine has been newly resealed at the tank. TECHNICAL DETAILS Max. workpiece dimensions (W x D x H): 1,050 mm x 800 mm x 295 mm Max. workpiece weight: 1,500 kg Gusdpfx Ajvphzvoh Deh Table dimensions: 780 x 630 mm Travel range of axes (X, Y, Z): 500 mm x 350 mm x 300 mm Axis rapid traverse speed: 0.1 m/s Wire diameter: 0.1 - 0.3 mm Wire tension: 0.1 - 0.25 N Taper cutting unit axis travel range (U x V): ±21° x ±21° Position detection method for each axis (X, Y, U, V): Linear scale Dielectric fluid tank Working volume: 750 l Filter flow rate: 60 l/min Filtration accuracy: 3 μm Filter element: Paper filter x 2 Dielectric conductivity (range): 0.5 - 30 x 10^4 Ωcm External dimensions (W x D x H): 880 mm x 2,070 mm x 1,565 mm Weight (dry): 400 kg MACHINE DETAILS External dimensions (W x D x H): 2,210 mm x 2,873 mm x 2,150 mm Weight: 3,500 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 60 obr/min, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Gusdpfx Ahevuqxbs Djh Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 mm Integrated C-axis Indexing and rotation: interpolation with X, Y, and Z axes as well as helical machining Rotational speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Filling volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor – clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control, and dielectric fluid Standards and directives Standards: Directive 89/336/EEC Electromagnetic Compatibility

Stanje: dober (rabljeno), število ravnalnih valjev: 23, višina izdelka (maks.): 15 mm, Manufacturer: SCHUBERT Model: WMP 63/600 Year of manufacture: 1974 Total rolls: 23 Upper rolls: 11 units Lower rolls: 12 units Variable speeds: 5 - 15 m/min Max. surface torque at 40 kg/mm²: 3500/1800 Minimum workpiece length: 130 mm Max. vertical roll gap: 16 mm Central lubrication Infeed table length: 400 mm Specifications Metric | US Standard Roll width: 650 mm Sheet thickness (with 5 x upper roll Ø): 15 mm Upper roll diameter: 63 mm Lower roll diameter: 63 mm Number of rolls: 23 Bending speed: 3 - 15 Number of driven rolls: 23 Dimensions (estimated) Length: 2,400 mm Width: 2,300 mm Height: 1,900 mm Weight: 6,000 kg Gusdpfxewpkxcj Ah Djh Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 2.916 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P 032B1591, teža obdelovanca (maks.): 1.000 kg, dolžina podajanja os X: 550 mm, dolžina pomika po osi Y: 370 mm, dolžina podajanja os Z: 410 mm, hitrost pomika os X: 900 m/min, hitrost podajanja osi Y: 900 m/min, hitrost podajanja os Z: 900 m/min, neprekinjena (navidezna) moč: 13 kVA, dolžina pomika os W: 120 mm, For sale: Fanuc Robocut Alpha-1iB wire EDM machine. Year of manufacture: 2003. The machine has a total operating time of 2,916 hours, including 178 cutting hours. Appraised by an expert as fully functional and in very good condition. Axis travels: X: 550 mm / 900 mm/min, Y: 370 mm / 900 mm/min, U: 120 mm / 450 mm/min, V: 120 mm / 450 mm/min, Z: 410 mm / 900 mm/min. Gjdpfx Aevwk Aljh Douh

Leto izdelave: 2001, Stanje: dober (rabljeno), X / Y / Z travel: 220 x 150 x 150 mm Z-axis unit: Standard equipment (= 5th axis) Guedpfx Ahsg Icdyj Djh Maximum taper angle: 15° (for workpiece thickness 100 mm) Taper machining unit: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Leto izdelave: 2019, obratovalne ure: 5.500 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The system must be collected by 26.05.23 – placing a bid obligates you to dismantle and collect within the deadline. TECHNICAL DETAILS: Max. workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1,000 kg Travel ranges: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control: Fanuc 31i-WB Installation dimensions: 2,440 x 2,680 mm Guedpfx Aek H D Haoh Doh Machine hours: 5,500 h

Stanje: rabljeno, Leto izdelave: 2006, Travel path - X axis 450 mm Travel path - Y axis 300 mm Travel path - Z axis 320 mm Travel path - U +/- 50 mm Travel path - V +/- 50 mm Control unit MGW-S3 Positioning accuracy +/- 0.015 mm Repeatability +/- 0.015 mm Table dimensions (L x W) approx. 580 x 730 mm Max. workpiece size (LxWxH) approx. 730 x 580 x 300 mm Max. workpiece weight approx. 800 kg Machine dimensions approx. 3,100 x 3,100 x 2,300 mm Machine weight approx. 3,400 kg Wire EDM machine | MAKINO - EU43 The machine is in a well-maintained condition. Please note that the technical details have been added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: EU 43 | EU-43 Gujdsvzcn Iepfx Ah Dsh

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 20.791 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 450 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, višina obdelovanca (maks.): 250 mm, širina obdelovanca (maks.): 550 mm, dolžina obdelovanca (maks.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions (W x D x H): 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (dry) Travel Paths Travel (X/Y/Z axes): 350 / 250 / 256 mm Travel (U/V axes): ±70 mm Max. taper at height: 30° at 100 mm Positioning Speeds Manual positioning speed (X/Y/Z/U/V axes): 2 m/min Programmable positioning speed (X/Y/Z/U/V axes): 3 m/min Remote Control Functions: wire drive, work tank, measurement cycles Display resolution: 0.0001 mm Jog wheel: electronic handwheel for X/Y/U/V/Z axes Control Console Display: TFT 15" XGA (1024 x 768) Input devices: alphanumeric push buttons, keyboard/mouse Wire Threading System Threadable height: up to 250 mm Threading nozzle diameter: 2 mm Guodsvuqtfjpfx Ah Doh Combined Wire Guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-guide: cylindrical up to 2° Toroid-guide: 2° - 30° Wire Drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guidance: semi-automatic Wire disposal: Schopper Work Tank Access: automatic drop tank Clamping system: clamping support or universal clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flush combination: coaxial/flushing/extraction Dielectric Unit Tank volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 containers with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling: water/heat exchanger Temperature control: ±1 °C automatic IPG Generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best surface roughness Ra: 0.1 µm Mean contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 Control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: multiprocessor Units: mm/inch Command set: absolute/incremental Smallest programmable step: 0.0001 mm Max. command length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions (W x D x H): 2,095 x 1,950 x 2,247 mm Distance floor to clamping surface: 1,100 mm Net weight: 2,800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Machine with water tank and automatic wire threading, cooling unit, and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Gedou Thd Hopfx Ah Djuh Accessories: dongle & laptop, various spare parts (nozzles, filters, etc.).

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Makino SP 43 CNC Control: MGW-R Travels: Guodpfoiv H Dqox Ah Dsh X-axis: 450 mm Y-axis: 300 mm Z-axis: 320 mm U/V-axis: +/- 101 mm Table size: 730 x 580 mm Tank size: 890 x 850 mm Max. workpiece weight: 900 kg Approx. dimensions (L x W x H): 3000 x 3000 x 2300 mm Approx. weight: 3400 kg

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Gedpfx Ahotv Tipe Douh 4 glave za upogibanje z vročo žico uporabna dolžina 2000 mm upogibanje PMMA in metakrilata z debelino od 1 mm do 20 mm nastavitev razmika med žicami 3 žice zgoraj/spodaj v vsaki skupini Moč in motorji Skupne dimenzije

Leto izdelave: 2000, Stanje: skoraj kot novo (rabljeno), Rabljeni stroj, ki ni bil nikoli uporabljen, leto izdelave: 2000. Na voljo je le ravnalni del stroja, zato ni rezalnega sistema niti mize za prevzem rezanih kosov (oboje je mogoče dokupiti pri proizvajalcu: Vitari). Kapaciteta: največ 4,0 mm. Gsdpfxjim Itts Ah Deuh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2002, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 220 mm, širina mize: 515 mm, dolžina mize: 640 mm, Wire EDM machine Chmer EDM Model: CD 305G X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 220 mm Table size: 515 x 640 mm Year of manufacture: 2002 Operating hours: 16,333 Including documentation and parameters Gedpfxoqgcimo Ah Deuh Dimensions: 245 x 200 x 203 cm (L x W x H)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2-1, 2006, Eurobend CNC 16x4 wapeningsstaal uit haspel richt- en knipmachine, gebruikt maar werkend. 4 x 5 ton haspelwagens met pneumatische remmen. 4 x rotoreenheden voor het richten van betonstaal in diameter 8-10-12-16 mm en automatische afkorting met hydraulisch bewegende messen. Mogelijkheid tot knippen van 1 lijn of gelijktijdig tot 4 lijnen. PC met optie voor barcodescanner. Afkortlengte tot 14 meter of meer. Opvangvakken voor opslag. Kettingtransporteur voor het transport van bundels. Godpsrdvq Aefx Ah Djuh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 921022, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, TECHNICAL DETAILS Gjdpfxjv Ul I Ds Ah Dsuh Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper angle/height: ±30° / 220 mm Machining type: submerged cutting technique Control: Windows NT with 12" TFT display, standard keyboard, and remote control WORKING AREA Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Taper cut: max. ±30° / 220 mm WIRE EDM SYSTEM Wire diameter: Ø 0.33 to 0.10 mm Diameter for automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm DIELECTRIC Filter: 2 paper cartridges Dielectric temperature: ±1 °C Ion-exchange resin filling volume: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire chopper - Standard interfaces (PCMCIA, Ethernet, etc.)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 2.751 h, Funkcionalnost: popolnoma funkcionalen, hitrost vleke: 20.000 mm/s, Premer žice (maks.): 3 mm, Wire Drawing Machine with Integrated Steel Fibre Machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil payoffs: 2 units Wire drawing machines: 2 units Steel fibre machines (integrated): 2 units Cooling system (liquid): 1 unit General Information Control: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power incl. spoolers: 150 kW Mains connection: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire Drawing Line Inlet wire diameter: 2.2 – 3.0 mm Outlet wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 - 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Capstan diameter (all): 450 mm Capstan motor rating: 18.5 kW each Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20 – 30 °C Compressed air requirement: 5 bar Cooling: Water (for die, capstans, blocks and die holder) Die Holder Equipment Adjustability: adjustable in all directions (up, down, left, right) Integration: combined with soap box Die housing: 43 x 27 mm Sensors and Measuring Technology Sensor arm: analogue sensors Length measurement: shaft encoders for length and speed measurement Cooling Cooling medium – die: water Cooling medium – drawing blocks: water Water consumption: approx. 17 m³/h Water pressure: 2 … 3 bar Water temperature: 20 … 30 °C Water inlet: left machine side Water outlet: right machine side Compressed Air Compressed air requirement: 5 bar Drives Motor type: AC motors, protection class IP55 Speed control: frequency converter by Control Techniques Motor power per drawing block: 18.5 kW Die holder motor: 0.3 kW Control System Control: Siemens PLC Operator interface: industrial touch panel (Siemens) Electrical Cabinet Design: Sheet metal housing with high level of protection Cooling: Air cooling Protection class: IP55 Electrics Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Paintwork Machine body: blue Guedpfxowmnhvo Ah Deh Moving parts: white Die holder: black Control cabinet: white Integrated Steel Fibre Machine (ISFM) Usable wire diameter: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronised with drawing line) Fibre types: hooked end, wavy, flat (tool-dependent) Fibre motor power: 7.5 kW Fibre length: tool-dependent Packaging: manual into bags or boxes on weighing trays Fibre tooling: specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two wire drawing machines type MBK-8/8x450 - Two integrated steel fibre machines ISFM - Two coil payoffs - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fibre packaging switching

Stanje: rabljeno, Leto izdelave: 1998, Sodick AM 35 CNC EDM stroj Model: AM 35 Letnik: 1998 Krmiljenje: Neuro Fuzzy II 40 Pomik osi 'X': 350 mm Pomik osi 'Y': 250 mm Pomik osi 'Z': 250 mm Dimenzije posode: širina 790 x globina 590 x višina 320 mm Gusdowqgh Ajpfx Ah Dsh Največja teža elektrode: 50 kg Največja obremenitev mize: 550 kg Opremljen z: - Magnetna vpenjalna plošča 350 x 250 mm

Stanje: novo, Ta stroj za upogibanje žice in trakov, opremljen z osmimi motorji Yaskawa in numeričnim krmiljenjem na računalniku z operacijskim sistemom Windows, je idealen za izdelavo večjih kosov v 2D ali 3D tehniki. Gujdpspiucxjfx Ah Djh Prednosti te opreme vključujejo nizke stroške orodij, enostavno programiranje, nizke stroške vzdrževanja, zanesljivost in ponovljivost dimenzij izdelanih kosov.

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Gujdpfevc Aklsx Ah Djh Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Table length: 920 mm Table width: 600 mm Current: 13.2 A Approx. machine weight: 6 t Space requirement approx.: 2.46 x 2.24 x 2.33 m X-axis travel: 600 mm Gedpfx Ahsuzbayo Djuh Y-axis travel: 400 mm Z-axis travel: 260 mm Max. table load: 1,500 kg Transport dimensions: Width 2240 mm x Height 2330 mm x Depth 2460 mm, Weight approx. 6,000 kg.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124322, teža obdelovanca (maks.): 500 kg, potovalna razdalja osi X: 318 mm, pomik osi Y: 218 mm, pomik po osi Z: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ±48 mm V-axis travel: ±48 mm Control system: PC-based, 14" color monitor, MS-DOS Taper angle/height: ±30° / 65 mm Working Area Type: Tank with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Floor-to-table distance: 1,050 mm Dielectric fluid volume: 240 l Dielectric level control: Automatic Wire EDM System Wire diameter: 0.10 – 0.25 mm Type of wire guide: Diamond-closed, backlash-free Programmable wire feed speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool mass and types (DIN): 1.6 kg Permissible spool mass and types (JIS): 3 kg Used wire disposal: Wire cutting at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic re-threading for wire diameters: 0.070 to 0.300 mm Minimum hole diameter for threading: 0.300 mm for 0.250 mm wire Dielectric Fluid Type: Deionized water Total dielectric fluid volume: 900 l Dielectric fluid temperature: ±0.5 °C Cartridge filters: 16 Ion exchange resin fill volume: 30 l Ionization control: Automatic Number of ion exchange bottles: 3 Flushing pressure range: 0 – 20 bar Number of programmable pressure stages: 16 Generator Max. machining speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten Gedpfov Tpnrox Ah Deuh MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Stanje: zelo dobro (rabljeno), Agie žična erozijska mašina Model: AGIE Cut Classic V3 Upravljanje: AGIE Pomak osi X: 500 mm Pomak osi Y: 350 mm Pomak osi Z: 426 mm Dužina obratka: 1050 mm Širina obratka: 650 mm Visina obratka: 420 mm Gedpfx Ahjv Hrywe Douh Maksimalna masa obratka: 800 kg Dimenzije: 1940 x 2300 x 2600 mm (VxŠxD) Težina: 3460 kg

Stanje: rabljeno, Leto izdelave: 1972, Technical Details: Maximum wire diameter: 12 mm Minimum wire diameter: 2.0 mm Program control: Process Controller Guedou Ic Hnepfx Ah Doh Total connected load: 18.5 kW Approx. machine weight: 10.5 t Machine dimensions (LxWxH): 2.6 x 1.8 x 2.7 m Lubrication system dimensions (LxWxH): 0.6 x 0.4 x 0.8 m Control cabinet dimensions (LxWxH): 0.5 x 1.2 x 2.1 m Coil reel dimensions: 2.6 x 1.8 x 2.7 m WIRE STRAIGHTENING AND CUTTING MACHINE by Wafios-Hack Also referred to as a spring coiling machine, suitable for producing right- and left-hand tension and compression springs. Feed length: 17,400 mm Spring diameter: 120 mm Performance range: Output: 1 – 70 pcs/min Spring diameter: 25 – 200 mm Wire sizes: Round steel Ø 5.0 – 14.0 mm and Square steel 5.0 – 12.5 mm Max. feed speed/spring length: 42,000 mm, Wire feed F1 = 40 m/min, F2 = 28 m/min, F3 = 20 m/min Currently equipped with: 6 wire feed rolls for wire reception Ø 4 mm for producing the final product: tension spring with wire Ø 4 mm, outer Ø 34 mm, length 135 mm Operation via control panel, Process Controller BRANKAMP Equipment: Lubrication unit Wire payoff reel Control cabinet cooler Reel Optional accessories and/or spare parts as shown in photo As is/subject to prior sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023 Pomiki stroja: 800 x 450 x 640 x 360 mm (X * Y * Z * W) Dimenzije stroja: 1910 x 1990 x 2240 mm (največ 2600 mm) (Š x G x V) Teža stroja: 1700 kg Največja teža obdelovanca: 500 kg 2-osni indeksator s trivratenim vpenjalom Uporabna premer elektrode: ø 0,1 ~ ø 6,0 mm Uporabna dolžina elektrode: 200 ~ 600 mm, maksimalna globina vrtanja: 360 mm Napajanje: 3-fazno, 415V, 50 Hz (nastavljivo) Največji dovoljeni tok: 30 A Nazivna moč: 5 kVA Guedjvgd Rzspfx Ah Deh Potreben zračni tlak: 5 bar Samostojen vodni sistem s filtracijo in deionizacijo z vgrajenim senzorjem CNC programiranje, iz DXF ali CNC samodejni vzorci izvrtin za PCD, vrste, mreže ali GM kodo Avtomatske rutine za nastavitve, iskanje lukenj in enostavno programiranje

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Guedpfx Aheff Efco Dsh Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -