Štiri Glave nakup rabljenega (2.104)

Stanje: rabljeno, Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!) Godpfx Anoxpn Tujfebl

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. Gbodpfxowgwmns Anfol SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- Gjdpjxpn T Uefx Anfobl > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Gjdpfx Aswwl Nlonfjbl Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000–6,000 rpm - Width and height are motor-positioned: left spindle: radial upper spindle: axial - Feed carriage motor-positioned DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15–230 mm Working height (with tool diameter 125 mm): 10–160 mm (with tool diameter up to 163 mm): 10–160 mm Min. workpiece length: Single piece: min. 800 mm Gjdpfowgwmhjx Anfjbl Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Grooving device: diameter difference 20–25 mm to planing head Important: The system cannot be operated without jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled...

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter Gedpfou Su Huox Anfsbl > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Stanje: rabljeno, Number of spindles: 6 units Working width: 230 mm Planing height: 160 mm Jointing table length: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min Weinig Powermat 1200 --- with infeed automation Weinig wheel magazine EM 100, linked to outfeed automation Weinig High-Mech A 1 The machine is completely overhauled at our warehouse prior to delivery! Detailed description: --- 1. Weinig Planing and Moulding Machine Powermat 1200 --- Technical data: --- Working width: 20 - 230 mm (with tooling diameter 93 - 163 mm) Working height: 10 - 160 mm (with tooling diameter 93 - 163 mm) 1st spindle Gbjdpfx Asvnwbconfol --- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 125 - 180 mm With PowerLock: 93 - 180 mm Tooling diameter for rebate cutters: 130-160 mm Axial adjustment: 17 mm Rebate device MarathonCoating in front of first lower tool holder 2nd spindle --- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Maximum moulding depth: 35 mm Axial adjustment: 80 mm Radial adjustment Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence level: 200 mm 3rd spindle --- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left tool holder, includes 2 lateral pressure rollers, spring-loaded 4th spindle --- First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 40 mm Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded. Upper spindle prepared for later installation of cassette system 5th spindle --- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 200 mm Tooling diameter for straight knife heads max.: 163 mm Maximum moulding depth: 35 mm Axial adjustment: 40 mm Divided pressure shoe ahead of upper tool holder on tooling circle, adjustable, can be swung away from tool, spring-loaded. Upper spindle prepared for later installation of cassette system 6th spindle --- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tooling diameter: 93 - 225 mm Maximum moulding depth: 15 mm Axial adjustment: 40 mm Radial adjustment Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm All spindles with high concentricity accuracy. Lubrication points for axial tool adjustment movement. Feed system --- Electronic feed, infinitely variable with brake 6-40 m/min, motor: 7 kW ...

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, CCT1600L A-M Preizkuševalnik tlaka za glavo in blok motorja – nova naprava. Hidravlično dviganje pladnja, motorizirana rotacija pladnja. Tehnični podatki: Maksimalne dimenzije glave motorja: Dolžina x Širina x Višina: 1350 x 425 x 300 mm Kapaciteta rezervoarja iz nerjavečega jekla: 500 litrov Grelni elementi: 2 x 4,5 kW Hidravlično dviganje pladnja Motorizirana rotacija pladnja Hidravlični dvig: 0,75 kW Reduktorski motor: 0,25 kW Čas pomika gor/dol: 600 mm v 10 sek Termostat: 0-90°C Napajanje: 16kVA-3x230V-AC-50/60Hz Lastna teža cca: 600 kg Potrebni prostor: Dolžina x Širina x Višina: 2100 x 1050 x 1700 mm Če vas zanima, me prosim kontaktirajte! Na voljo še ostali stroji: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Gbodpfxsncd Ecs Anfel Naprave za brušenje ventilov, stroji za brušenje glav in blokov, rezkalniki sedišč ventilov, preizkuševalniki tlaka, industrijski pralni stroji

Stanje: rabljeno, Leto izdelave: 1980, with 7 spindles with universal spindle used Make: Weinig Model: U17A Year of manufacture: 1980 Machine No.: 11881959 Spindle arrangement: bottom – right – left – right – top – bottom – universal Motors: 4.0 – 3.0 – 5.5 – 7.5 – 5.5 – 4.0 – 4.0 kW Planing width approx. 170 mm Planing height approx. 120 mm Spindle diameter: 40 mm Pneumatic pressure rollers Infeed before the jointer Feed speed infinitely variable Gbedpfxjvwfqdo Anfsl Extraction connection: 7 x 120 mm Space required: approx. 5200 mm x 1400 mm x 1500 mm Weight: approx. 3000 kg Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition Without guarantee or warranty

Stanje: rabljeno, Leto izdelave: 1987, with reversible knives – equipped with insert cutterheads Used, in good condition Manufacturer: Weinig Model: Profimat P22M Year of manufacture: 1987 Machine no.: 2261149 Number of spindles: 4 Spindle arrangement: bottom - right - left - top Motor power: 4 - 5.5 - 5.5 kW Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle diameter: 40 mm Table length: approx. 2000 mm Cutterhead system: insert cutterheads Gbsdpfxjvwfpto Anfol Premilling cutter Cardan feed Protective hood Table lubrication with lubricant pump Infeed before jointer Feed speed steplessly adjustable: 5–22 m/min, 2.2 kW Profiling Feed rollers: 1 driven roller Electric adjustment of thicknessing shaft Digital displays Extraction connection: 120 / 120 / 120 / 140 mm Space required: approx. 3300 mm x 1750 mm Weight: approx. 1300 kg Location: 97447 Gerolzhofen, loaded on truck, unpacked Sold as is, as inspected, without warranty or guarantee.

Stanje: novo, Leto izdelave: 2025, This UV printer replaces conventional laser printers – also for color prints on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Pro Three-head system: 2x CMYK + 4x White + 4x Varnish Flexibility powerhouse – color + white + varnish functionality Print heads: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV / 18 channels) Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes printing and image editing software Weight: 99 kg Control display Vacuum air table – for holding lightweight materials firmly Table movement by screw drive technology 360-degree printing available upon request: for large round bottles or objects A2 print size: 45x65 cm, with 20 cm print height Gbjdpofvyacefx Anfjl Printer dimensions: 1000 x 980 x 650 mm Water circulation cooling system Software setup and printer instructions available on request, Germany/Europe-wide.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood code: RU0008955 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: BORING MACHINE BIESSE TECHNO FDT - TECHNO F - TECHNO S - If interested, we offer overhaul service; please contact us. Gedpfjv Hp S Dsx Anfjbl

Stanje: novo, 4-jaw chuck, unused Diameter: 400 mm Mount: KK 8 (140 mm) Bore: 125 mm Godpfx Anod Idnwjfobl Interchangeable jaws Height: 140 mm Weight: 62 kg

Stanje: novo, 4-jaw chuck, unused Diameter: 320 mm Mount: KK 8 (140 mm) Bore: 95 mm Interchangeable jaws Height: 140 mm Weight: 36 kg Gjdpsd Idnvefx Anfobl

Stanje: dober (rabljeno), 100 EUR net / piece Gsdjw Ad Ttjpfx Anfjbl

Stanje: dober (rabljeno), Stroj za rezanje navojev, rezalnik navojev za cevi - Proizvajalec: Rothenberger, stroj za rezanje navojev tip Supertronic 2SE brez glave za rezanje navojev - Velikost cevi: 1/2 do 2 cola - Vretenasta odprtina: Ø 68 mm - Obratovalna napetost: 230 Voltov - Hitrost vrtenja: 40 obr/min - Nožno stikalo: z varnostno zaustavitvijo - Oprema: rezalnik cevi, notranji rezkar - Dimenzije: 500/480/V370 mm - Teža: 46,6 kg Gbsdpfox I Agpsx Anfsl

Stanje: dober (rabljeno), - Output: up to 3,000 bottles/hour - With cork presence detection at the infeed - Cork dust blow-off on the bottle - Equipped with capsule applicator Gjdpsralrujfx Anfebl - With shrink head - Running direction: left to right - Machine completely overhauled - Machine in very good condition

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Letnik izdelave: 1989 Tehnični podatki: Dolžina ravnalne mize: 2100 mm Premer orodnega vretena: 30 mm Premer skobeljnih glav: 100 mm Število obratov skobeljnih valjev: 6000 min⁻¹ Delovna širina: 30 - 180 mm Delovna višina: 6 - 120 mm Gbsdpfxow I U Uqo Anfel Z opcijsko manjšo skobelno glavo za levi valj in ožjimi podajalnimi valji je mogoče doseči minimalno širino 15 mm Moč motorjev spodaj, levo, desno: vsak po 3,7 kW Moč motorja zgoraj (debelinec): 5,5 kW Podajalna hitrost: 6 in 12 m/min električna nastavitev višine z 1/10 tip stikalom Vključene skobelne glave Priključki za odsesavanje: 160/120/120/140 mm Razpoložljivost: kratkoročno Skladišče: Flörsheim

Stanje: rabljeno, Leto izdelave: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Spindle diameter: 30 mm Cutterhead diameter: 100 mm Cutter shaft speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm Gbedpfx Anoxgkf Ujfel With an optionally available smaller cutterhead for the left shaft and narrower feed rollers, a minimum width of 15 mm can be achieved. Motor power, bottom/left/right: 3.7 kW each Motor power, top (thicknessing shaft): 5.5 kW Feed speed: 6 and 12 m/min Electrically adjustable height with 1/10 incremental control Incl. timed infeed roller Incl. cutterheads Extraction ports: 160/120/120/140 mm Availability: short notice Location: Flörsheim

Stanje: rabljeno, Set of 2x Weinig Powerlock L=270 Z=2 cutterheads Gbjdpfxeydk Rgo Anfel Type 536, diameter 93 mm 536.095.25 Top 536.095.24 Bottom Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 270 mm Note: price is 600 euros for a set of 2 pieces.

Stanje: rabljeno, Keyway slotting head, slotting head suitable for milling machine DECKEL Type FP 2 Serial No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Distance from dovetail front edge to centre of gear: approx. 235 mm Stroke length: max. 80 mm Number of strokes: max. 210 double strokes/min Tool holder: square 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Drive from machine gearbox, within dovetail guide (as with the standard vertical head) - This slotting head is inserted into the dovetail guide in place of the standard vertical milling head (installation in place of the vertical head / milling head) - Drive gear in slotting head: 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head can be rotated 360° on the flange plate, angle scale +/- 35° Weight: 32 kg Gjdpjwbi Rbofx Anfebl Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 have a pressure angle of 20° on the drive gear

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable Godpog Rxh Isfx Anfebl

Stanje: rabljeno, Boring head, spindle head, drilling head, grooving boring head, grooving head, spindle drilling head, facing head, spindle tool - Manufacturer: Sandvik Coromant R391.B03R-40F53 A Godpfx Anec Spm Djfjbl - Mounting: Ø 40 mm - Boring tool holder: 16 x 8 mm - Tool diameter: Ø 435 mm - Weight: 6.1 kg

Stanje: rabljeno, Indexing head, spiral milling attachment, dividing apparatus, tool holder for grinding, drill bit grinding machine, cutter grinder, drill bit grinding holder, cutter grinding holder - Accessories: for tool grinding machine - Taper: SK40 Godpfjc Ibyxox Anfjbl - Center height: 110 mm - Indexing head: swiveling/rotatable/tiltable - Dimensions: 420/350/H240 mm - Weight: 38 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Gbjdpfxsd R Exfs Anfsl - Chuck size: Ø 200 mm - Bolt circle: Ø 133 mm - Through hole: Ø 20 mm - Weight: 22.1 kg