Čelada Profil nakup rabljenega (6.552)

Stanje: dober (rabljeno), V obsegu dobave je vključeno: 01x CS-profil, rabljen Barva materiala: sendzimir pocinkano Skupna dolžina: 5.550 mm Dimenzije profila: CS 250 x 50 x 40 mm Debelina materiala: cca 2,5 mm Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Kedjx R Ambspfx Af Tedg Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. V primeru želje po transportu ali pošiljanju artikla nastanejo dodatni stroški, ki jih je mogoče po potrebi preveriti glede na dostavno lokacijo ali obseg dobave.

Stanje: dober (rabljeno), Included in the scope of delivery: Kdsdpfeibzftjx Af Teg 01x pallet rack beam, used Colour: orange Profile: IPE 100 x 55 mm Connector: 3 holes Clear span: approx. 2,700 mm Each connector with 3 holes Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 01x set of fastening material consisting of: 06x M10 bolts 06x nuts 06x washers

Stanje: dober (rabljeno), Technical data for CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Scope of delivery includes: 01x CS Sigma profile, used Material finish: sendzimir galvanized Ksdpfxsidchcj Af Tsdg Total length: approx. 5,500 mm CS Sigma profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Stanje: dober (rabljeno), Technical Data for the Pallet Racking Upright: Kodpfxev I Tcpo Af Tjdg Racking System: SSI Schäfer Type: K Scope of Delivery Includes: 01x Pallet racking upright, used Material finish: sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Including cross and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) Frame height: 2,000 mm Frame depth: 1,100 mm Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping of this item is available upon request and will incur additional costs, which can be provided based on the delivery location and scope.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x C-profile, used Profile dimensions: C: 50 x 50 x 15 mm Material finish: Sendzimir galvanized Total length: approx. 2,775 mm Material thickness: approx. 2.00 mm Weight per piece: 7.080 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Kdodpfxsnfvbpo Af Tog General information about the item: This item is only offered for collection. If transport or shipping of the item is required, this will incur additional costs, which can be requested from us separately depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Included in delivery: 01x Support post, used Material colour: blue Overall length: approx. 1,660 mm Profile dimensions: U: 70 x 30 mm Material thickness: approx. 2.00 mm Kedpfx Afsk Uufxj Tedg Number of drilled holes: 02 pcs. Drilled hole Ø: approx. 11 mm Base plate dimensions: approx. 130 x 130 x 3.00 mm Weight / pc.: approx. 3.570 kg

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Material color: light blue Total length: approx. 1,600 mm Profile dimensions: U 50 x 28 mm Number of holes: 2 pcs. Hole diameter: approx. 11 mm Kjdpfjk Uyriox Af Tedg Weight per piece: approx. 1.8 kg General information about the item: This item is only available for collection. Should transport or shipping of this item be required, additional costs will apply, which can be provided upon request depending on delivery location and scope of order.

Stanje: dober (rabljeno), Included in delivery: 01x C-profile, used Manufacturer: SSI Schäfer Profile dimensions: C: 60 x 40 x 8 mm Material finish: Sendzimir galvanized Total length: approx. 1,865 mm Center-to-center hole distance: approx. 1,825 mm Material thickness: approx. 1.50 mm Number of drill holes: 2 pcs. Drill hole diameter: approx. 10 mm Note: - Area of application: pallet racks - For double rack rows, anti-push-through barriers are required if the distance between load carriers or load units is less than 100 mm. - For single rack rows, anti-push-through barriers prevent unintentional falling of load units. - An anti-push-through barrier can also be used to attach/mount rear wall mesh panels. Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Kdjdsnbd Urepfx Af Teg General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Included in delivery: 01x C-profile, used Material colour: Sendzimir galvanized Total length: 7,200 mm Profile dimensions: C 360 x 100 x 35 x 10 mm Material thickness: approx. 4 mm Kdedpfew Hgwcsx Af Teg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping beyond this is required, additional costs will apply, which can be inquired with us separately depending on the place of delivery and scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x L-bracket, used Material color: orange L-profile: approx. 60 x 60 mm Material thickness: 4.00 mm Total length: approx. 4,850 mm Bore diameter: approx. 13 mm Hole spacing: approx. 50 mm Weight per piece: approx. 16.2 kg General information about the item: Kedolhrh Tspfx Af Tedg This item is offered for collection only. If transport or shipping is required, this will incur additional costs which can be provided upon request depending on the delivery location and the scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-profile, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Kdjdpfjv Ia Rmsx Af Teg Weight | per piece: approx. 26.31 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply, which can be individually requested from us depending on the delivery location or scope of delivery.

Stanje: dober (rabljeno), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Kdsdpfx Afsidchgj Tsg Scope of delivery includes: 01x CS Sigma profile, used Material color: sendzimir galvanized Total length: approx. 5,600 mm CS Sigma profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Stanje: dober (rabljeno), Tehnični podatki o stojalu za paletne regale: Regalni sistem: Bito Tip: PRO V obsegu dobave je vključeno: 01x stojalo za paletne regale, rabljeno Barva materiala: sendzimir pocinkano Profil okvirja: P5 Kdsdpjx Hz Dwefx Af Tog Mere profila: P 100 x 76 x 2,25 mm Vključno s prečnimi in diagonalnimi vezmi, nožnimi ploščami in zaščito za stojala Stojala so predmontirana (vijakasta rešetkasta konstrukcija) Višina: 12.400 mm Globina: 1.100 mm Vaši kontaktni partnerji v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Dodatni prevoz ali pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih lahko glede na lokacijo ali obseg dostave posebej povprašate pri nas.

Stanje: dober (rabljeno), Included in delivery: 01x C-profile, used Kdsdpfonbfapsx Af Tog Manufacturer: SSI Schäfer Profile dimensions: C: 60 x 40 x 8 mm Material finish: Sendzimir galvanized Total length: approx. 1,015 mm Hole center-to-center: approx. 975 mm Material thickness: approx. 1.50 mm Number of holes: 2 pcs Hole diameter: approx. 10 mm Note: - Application: Pallet racking systems - In double rack rows, push-through protections are required if the distance between load carriers or loading units is less than 100 mm. - In single rack rows, push-through protections prevent the unintentional falling out of loading units. - A push-through protection can also be used to fasten/mount rear wall mesh panels. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only available for collection. If delivery or shipping is required, this will incur additional costs, which can be individually requested depending on the place of delivery and scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-profile, used Material color: blue Total length: approx. 1,480 mm U-profile: approx. 50 x 50 mm Material thickness: approx. 3.00 mm Kdodjlhqkwspfx Af Tsg Number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Weight per piece: approx. 4.930 kg General information about the item: This item is offered for collection only. Any transport or shipping beyond this is subject to additional costs, which may be requested separately depending on the place of delivery or the scope of delivery.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the wide-span racking beam: Racking system: Stow Type: Midirack Scope of delivery: 01x Wide-span racking beam, used Material color: yellow ZM profile: 75 x 30 mm Beam type: MNZBG 2274 Connector: 2 HK (hooks) Clear span: 2,700 mm 02x Safety pins, used Kdsdpfx Afeh A Hxqo Tjg Version: fully galvanized For securing the longitudinal beams against unintentional lifting Note: The beams are designed to accommodate chipboard panels with a thickness of approx. 22 mm General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which can be quoted separately depending on delivery location and volume. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635 performed in compliance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: zelo dobro (rabljeno), Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Included in the scope of delivery: 01x C-profile, 2nd choice Manufacturer: SSI Schäfer Material colour: Sendzimir galvanized Kdjdeh T Avxjpfx Af Tog Total length: approx. 1,510mm Profile dimensions: C 100x60x10 mm Material thickness: approx. 3.0 mm Note: - As this is used equipment, damages, drill holes, welded areas, or rust may be present. General information about the item: This item is offered for collection only. Should transport or shipping of this item be required beyond collection, additional costs will apply, which can be provided separately depending on the delivery location and scope. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions apply. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (off-loading excluded)

Stanje: dober (rabljeno), Included in the scope of delivery: Kodpfx Aeibzgxef Todg 01x pallet rack beam, used Material color: orange IPE profile: 100 x 55 mm End connector: 5 holes Clear span: approx. 2,700 mm Per end connector: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 01x set of fastening material consisting of: 10x M10 bolts 10x nuts 10x washers

Stanje: dober (rabljeno), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Kodoidcg Aopfx Af Tjdg Scope of delivery includes: 01x CS Sigma Profile, used Material color: sendzimir galvanized Total length: approx. 4,450 mm CS Sigma Profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Kdsdpfx Afjwtnl Uo Tsg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: skyCNC 6008, potovalna razdalja osi X: 900 mm, pomik osi Y: 6.100 mm, pomik po osi Z: 270 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 8 m/min, dolžina obdelovanca (maks.): 6.000 mm, širina obdelovanca (maks.): 800 mm, premer obdelovanca (maks.): 270 mm, širina mize: 800 mm, obremenitev mize: 400 kg, skupna masa: 3.250 kg, hitrost vretena (min.): 15.000 obr/min, X 900 Y 6100 Z 270 mm 11kW (table 800) Available immediately! PFEIFER technology skyCNC Milling Machine 6008 – 11kW / 5 ATC (as new, from 2021, only 400 operating hours) Kdjdpfx Aewlqpyof Tsg CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality For sale on behalf of a customer: An as-new 6-meter CNC milling machine with automatic tool changer. The system is immediately available and operational at the user’s facility; the sale is due to a switch to laser processing. The system can be inspected under power at the customer's/seller's site in 07819 Triptis. Key Features: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance under gantry 300 mm, max. tool length 300 mm) - Automatic 5-position tool changer, ISO40 tool holder (optional 10 tool positions available); incl. 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimal-quantity lubrication/spray cooling for cooling workpiece and tool, automatically controlled via solenoid valve by M-code - T-slot table 6000 mm x 800 mm - Incl. 3 pneumatic quick-action vices HOMGE HBV-8-300; jaw width 200 mm, clamping force up to 8.0t – infinitely adjustable; high clamping accuracy; patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for easy and quick operation, workpiece zero points freely selectable - Ethernet connection for network data transfer, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power connection: 3-phase AC 400V / 50 Hz, max. power consumption: 15 kW - Dimensions (LxWxH): 6850 x 1440 x 2163 mm, weight: approx. 3,250 kg - Compressed air connection: min. 7 bar, air filter required Sale exclusively to commercial customers only! Support and service by PFEIFER technology & Innovation Plauen

Leto izdelave: 2009, obratovalne ure: 5.387 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Ksdpfxox U Thke Af Tjdg Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h

Stanje: novo, We can offer 750 new and 103 slightly used chipping knives for the LINCK VP 34 profiling unit. Kodeiyw Hmjpfx Af Todg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Prebijalni stroj za profile Ponzio Kdjdpfx Afsx Trums Tjg Kombinirani stroj za 6 operacij

Stanje: zelo dobro (rabljeno),