Visok list 6 krožnih žag

MS- Maschinenbau UBS-6-55

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/40°C, 118 kW at -10°C/40°C, 77 kW at -20°C/40°C Refrigerant: R404A Ksdpsh Dht Defx Aqgslw Stock quantity: 3 units Stock number: S 75 Condition: Used, good We have a large selection of other refrigeration equipment available: condensing units, compressors, coolers, condensers, chillers, cold rooms, as well as refrigerated and catering furnishings, and machines and equipment for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) Ksdpfx Asfu Ivzoqgslw • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 926 h, skupna višina: 1.800 mm, skupna dolžina: 11.250 mm, skupna širina: 900 mm, Barva: Siva Teža: 1.500 kg Cena: Na zahtevo - Leto izdelave: 2012 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 546324 - Delovne ure: 926 - Glavna moč motorja [kW]: 7,5 - Največja dolžina žaginega lista [mm]: 7.209 - Največja širina žaginega lista [mm]: 300 - Največji premer žaginega lista [mm]: 500 - Premer žaginega lista na osi [mm]: 85 Kljdpfxjyna Eze Aqgjw - Dolžina podajalne mize [mm]: 7.850 - Dolžina izhodne mize [mm]: 2.400 - Opcije: Avtomatski podajalni sistem - Napetost [V]: 400 - Poraba toka [A]: 22 - Varovalka [A]: 25 - Moč [kW]: 11,0 - Transportne mere: 11.250 mm x 900 mm x 1.800 mm (d x š x v) - Transportna teža [kg]: 1.500 kg Finančne informacije DDV: Navedena cena je brez DDV DDV / obdavčenje na razliko: DDV je odbiten za podjetja Dostava in odkup sta vedno možna za vse iz industrijskega področja Yorick Diebels

Stanje: novo, Intended use: Construction Klsdpfx Aopa Rntoqgow Suitable application: Wheel loader

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Ksdpov Si Szjfx Aqgelw Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, 7 pieces of folding tools for a swivel bending machine, length 3000 mm. Klodpfx Ajb D Ry Roqgow

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Söderhamn småstockslinje med Euromill-profilert Avbarkare Cambio 45 med inmatning och riktbord efter 2D-skanner Söderhamn 447 inmatning Ksdpfswp E E Dsx Aqgolw 240-12 hyvelkantare Blockvridare och inmatning 240-12 hyvelkantare Euromill-profiler Brädseparator med justerbart centrum Flistransportör under såglinje Hydraulaggregat och elskåp.

Stanje: dober (rabljeno), za traktorsko kosilnico, sedežno kosilnico, kosilnico, vrtni traktor, kosilno enoto, kosilnico, kosilni greben, diskasto kosilnico - Rezila za kosilnico: 48 kosov - Vrste: različne - Paket: v kompletu Kljdpfx Aqjb A R Uhjgsw - Cena: v kompletu - Teža: 120 kg

Stanje: rabljeno, Valon Kone VK26M Mit Einlauf- und Auslaufband. Kljdpfx Aqjvgtz Negew

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Kjdpfx Aqjg Rn Avsgslw Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.