MORI SEIKI RL2500

MORI SEIKI RL2500

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Lhodpfxermkfnj Aamei Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 360 mm, največja višina reza: 100 mm, Obseg rezanja okroglega jekla pri 90°: 100 mm, dolžina odseka (min.): 300 mm, Fully automatic carbide straight-cut circular saw machine Type KMR 100 AP Completely overhauled to as-new condition – available from stock WORKING RANGE Round material: 20 – 100 mm Square material: 20 – 80 mm DRIVE POWER Saw motor, frequency controlled: 11.0 kW Lsdpjh Uqpvjfx Aamjhi CUTTING SPEEDS 20 – 150 m/min Includes feed magazine for 6 m bars and sorting unit for crop/end pieces and good parts Suitable for cut-off lengths up to 300 mm Cutting time for Ø 100 mm solid material (1.0037): approx. 7 seconds! Your advantage: – Machine directly overhauled by the manufacturer incl. 6 months parts warranty – All machines are completely disassembled and overhauled – Only original KALTENBACH spare parts are used

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 860027, Offer 24331 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Tapping capacity up to: M16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 - 1800 rpm, 200 - 3600 rpm - Motorized movement of the drilling unit - Motorized table clamping in X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar Ledpfsu Aq Amjx Aamjhi - Electrical connection: 400 V - Required space: approx. W 1750 x H 1600 x D 1000 mm - Weight: approx. 1200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, premer nad prečnim suportom: 360 mm, maksimalni premer struženja: 366 mm, maksimalna dolžina struženja: 705 mm, prehod pre palico: 80 mm, hitrost vretena: 4.000 o/min, hitrost rezkanja: 10.000 o/min, moč glavnega vretena: 18,5 kW, os C: 0,001 stopinje, os Y: -/+ 50 mm, revolverska glava s 12 postajami. Mori upravljanje M730BM, opremljen z merilcem orodja, transporterjem odrezkov, trivrato vpenjalno glavo, pobiralnikom delov, podajalnikom palic. Lhjdpfxox Eituo Aamji

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm Lhedpou Et Nbofx Aamsi - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 073759001, Offer 22489 Ledpfx Aaoim Ildsmehi Technical data: - Cutting range at 90° round 320 mm - flat 320 x 320 mm - Material feed automatic - Saw band dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper lift limitation for saw frame - Infinitely variable cutting pressure adjustment - Hydraulic material vise - Chip conveyor screw - Coolant system - Discharge roller table 2500 mm - Drive motor 400 V / 4.0 kW - Required space approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm Control Fanuc MSX-701III Maximum turning diameter: 660 mm Maximum turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 stations Turret with 10 positions Total connected load: 90 kVA Machine weight approx. 26.6 t Space required approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Axes travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis 1° indexed and 0.0001° clamped X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min., (Y, X2, Z2, SZ) 30 m/min. Main and sub spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30-3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc turret: Number of tool stations: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40 positions Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total connected load: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: - Upper milling spindle (B-axis), full 4th axis, positioning 0.0001° - 40-position tool magazine - Lower 10-position turret, all positions driven - 2 x 3-jaw quick change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, pressure selectable 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit - Chip conveyor - Blow-off system for main spindle chuck (M-function control) - Blow-off system for tool cutting edge (M-function control) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system for X1, X2, Y axis - Bar feeder interface - Dual foot switch for both spindles - Islands and pockets programming for MAPPS - High speed fixed cycle for MAPPS Ljdpfx Aajy Spuuemjhi - Program memory extension to 8 MB - Program restart - 3-stage signal lamp - Memory card 512MB (CF Card) - Measuring arm (image) for tool measurement in machine - Tool holder + case, reduction sleeves, driven tools - Jaw set - Collet set

Stanje: novo, Leto izdelave: 2026, Automatic Drilling Machine Kudu with NC control and manual tool change (3-axis) Ljdpfx Ajfu Iwmoamjhi Automatic drilling machine with movable processing unit – the table remains stationary while the drilling head moves. The unit can be operated both manually and fully automatically. After each drilling operation, the processing unit automatically moves along the X and Y axes to the next drilling position. Operation is extremely user-friendly. Programming is performed directly at the machine control panel. The system is particularly robust, comprising proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base frame • Drill head speed: up to 2,800 rpm • Tool holder: HSK 50 • X, Y, and Z axis powered by servomotors • Rapid traverse on X axis: 18 m/min • Rapid traverse on Y axis: 5 m/min • Distance from table top to underside of tool holder: 245 mm • Table width: 450 mm • Working height: 1,005 mm • Drilling diameter: 3 to 15 mm in St. 50 (tool dependent) • Working travel in Y axis: 230 mm • Tolerance in X axis: ±0.1 mm/m • Tolerance in Y axis: ±0.05 mm • Tolerance in Z axis: ±0.05 mm • Machine weight: 2,000 kg • Machine dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safeguarding via light barrier • Rear access secured by machine fence • Simple programming directly at the machine • Cooling via minimum quantity spray system • Supplied without material clamps • Digital handwheel Your Benefits • Gentle on workpiece surfaces • Clear, graphical user interface • End-of-workpiece machining without difficulty • 50% space-saving compared to feed-through processing • Chips are collected in chip tray • Extremely simple programming and operation You are welcome to inspect the desired system at any time in our production/demo hall. Please feel free to contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Drilling capacity steel/cast iron: 25mm/32mm, thread cutting capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500rpm, feed rate: 1050mm/min, outreach: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Lodpju N Hdasfx Aamjhi

Stanje: rabljeno, Leto izdelave: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel of drilling head: 400 mm Drilling head vertically adjustable: 400 mm Quill stroke: 150 mm Spindle taper: MK4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat distance (spindle): min./max.: approx. 400 / 50 mm Vertical arm adjustment: 850 mm Horizontal arm adjustment: 400 mm Arm length: 1360 mm Arm pivot (horizontal): swiveling, mm/min Drill spindle speeds: 100...2 steps rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance from table to bottom edge of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Machine weight approx.: 1.8 t Machine dimensions approx. LxWxH: 1.3 x 1.3 x 2.25 m Lodpfx Aewi Iqveamshi Equipment: 2x base rails Provision for mounting a vertical table Accessories: Various clamping devices