Večnamenski CNC stružnica

MORI SEIKI NT4250 DCG/1500 SZ

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Centre height over bed: 165 mm Centre height over cross slide: 105 mm Hsdpfju St S Aex Afwjff Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Splošni podatki Teža stroja: 2500–2950 kg Ta 12-osni Citizen Cincom M16-4M8 je bil izdelan leta 2021 in ima robustno konfiguracijo z možnostjo uporabe do 38 orodij, vključno z možnostmi za skupinska orodja, revolversko glavo in zadnji nosilec orodij. Omogoča hitro podajalno hitrost 32 m/min, s posebnimi hitrostmi za osi X2, Y2 in B. Glavni vretenasti motor ima moč 2,2/3,7 kW in zagotavlja učinkovito delovanje. Razmislite o priložnosti za nakup tega švicarskega stružnega stroja Citizen Cincom M16-4M8. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Struženje Hjdpfx Aex D Nfuefweff

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B axis. 10-position pallet changer, automatic tool changer with 199 tool pockets. Accessories supplied with the machine: Hfjdpoku A A Hofx Afwef Chip conveyor, high-pressure coolant system through the spindle with separate tank and paper filter.

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Hsdpfx Afsvca Rcjwoff Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.

Stanje: rabljeno, Leto izdelave: 2013, Swing diameter . mm Turning length 2000 mm Control Siemens 840 D sl Main spindle: max. speed 3800 rpm Main spindle: max. torque 1200 Nm Tailstock quill diameter 140 mm Center taper MK6 Tailstock force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the vendor's plant. It is in good condition, with excellent turning accuracy. The milling drive is non-functional. A quotation from Niles for the repair of the milling drive is available upon request. Includes hydraulic steady rest. Hfodpfxovu E R Ss Afwjf

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Hfedpfsl Tn Afsx Afwjf Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: dober (rabljeno), Leto izdelave: 2000, CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Hodofrbckspfx Afwsff Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Complete machine documentation available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Centre height: 210 mm Swing over bed: 420 mm Swing in bed gap: 580 mm Swing over cross slide: 250 mm Distance between centres: 1000 mm Spindle nose: D1-6 Spindle speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Longitudinal feed: 0.05 – 1.7 mm/rev (17 steps) Cross feed: 0.025 – 0.85 mm/rev (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth threads: 2 – 72 TPI; (45 degrees) Module threads: 0.3 – 3.5 MP, (18 steps) Tailstock quill diameter: D50 mm Tailstock quill stroke: 120 mm Tailstock taper: MK4 Power: 3.3 kW/400 V Machine weight: 1270 kg Dimensions (L x W x H): 1940 x 850 x 1320 mm Equipment: Hsdpfx Asx Rt Eujfwsff - 3-axis digital readout system - Fixed steady rest - Travelling steady rest - 3-jaw chuck fitted, D200 mm - 4-jaw chuck D250 mm - Drill chuck safety guard with safety switch - Rear splash guard - Tailstock - Coolant system - Chip tray - Toolpost guard - Longitudinal stop - Halogen work lamp - Emergency stop button - CE marking - Machine documentation The machine is a brand-new exhibition model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Hjdpsu Sbkgjfx Afwoff Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Hsdpfxot Hw N Hs Afweff Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice