CNC stružnica

Mori Seiki NL 2500/700

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Cette tour MORI SEIKI NL2500MC/700 à 3 axes a été fabriquée en 2006. Elle possède un diamètre d’usinage maximal de 366 mm et une longueur de tournage de 705 mm. La machine est équipée d’une tourelle à 12 positions et atteint une vitesse de broche allant jusqu’à 4000 tr/min. Si vous recherchez un tour de haute qualité, considérez la MORI SEIKI NL2500MC/700 que nous proposons à la vente. Contactez-nous pour plus de détails. • Diamètre d’usinage maximal : 366 mm Cjdpeym T Dnefx Afnogp • Longueur de tournage maximale : 705 mm • Course X/Z : 260/795 mm • Nombre de positions : 12 • Caractéristiques : Tourelle avec fonction fraisage 6000 tr/min (5,5/3,7 kW) • Contre-pointe programmable : CM5 • Prérégleur d’outils • Porte-outil • Refroidissement haute pression • Mandrin Kitagawa 10'' à passage intégral • Déchargeur de pièces • Convoyeur à copeaux • Pression de refroidissement : 20 bar

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Cgedpfx Afeu Aa I Sjnep Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Steuerungssystem MXS 850 IV Technische Daten: - Max. Umlaufdurchmesser über Bett: 755 mm - Max. Umlaufdurchmesser über Support: 740 mm - Max. Drehdurchmesser: 366 mm - Drehlänge: 785 mm - Verfahrwege: - X-Achse: 260 mm - Y-Achse: 100 ±50 mm - Z-Achse: 795 mm - Eilgang X/Y/Z: 30/20/50 m/min - Spindelleistung: 26/22 kW - Spindeldrehzahl: 4.000 U/min - Stangendurchlass: 80 mm - Futterdurchmesser: 250 mm - Spindelaufnahme: JIS A2-8 - Spindelindexierung: 0,001° - Gegenspindel-Leistung: 11/7,5 kW - Gegenspindel-Drehzahl: 6.000 U/min - Stangendurchlass Gegenspindel: 80 mm - Futterdurchmesser Gegenspindel: 150 mm - Gegenspindelaufnahme: JIS A2-5 - Gegenspindel-Indexierung: 0,001° - Anzahl Werkzeuge im Revolver/angetrieben: 12/12 Stück - Leistung angetriebene Werkzeuge: 5,5 kW - Drehzahl angetriebene Werkzeuge: 6.000 U/min - Maschinengewicht: 6.200 kg - Maschinenabmessungen LxBxH: 4,34 x 2,00 x 2,120 m Ausstattung: - Späneförderer - 3-Backenfutter Kitagawa BB-210 im Hauptspindel Cedpfx Aoyilzhsfnogp - Kitagawa B 206 im Gegenspindel - Werkstückfänger - Verschiedene Werkzeughalter - Schnittstellenanschluss für Stangenlader - Synchrongewindeschneiden - Maschine mit 17.800 Betriebsstunden.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GLAVNO VRETENO: Vretenasta glava: A2-8 Moč glavnega vretena: 18,5 kW Največja hitrost glavnega vretena: 4.000 obr/min Največja odprtina vretena: 80 mm Največji obdelovalni premer: 366 mm C-os: 0,001 stopinje REVOLVER: Število pozicij: 12 kos Število gnanih orodij: 12 kos Pomik X/Z osi: 280 / 785 mm Pomik Y osi: +/- 50 mm Največja hitrost gnanih orodij: 6.000 obr/min Moč gnanih orodij: 5,5 kW KONJIČEK: Vpenjalni stožec: MK5 Razdalja med konicami: 705 mm ELEKTRIČNA NAPAJANJA: Skupna moč: 39 kVA TEŽA IN MERE: Prostorska zahteva: 3.800 x 2.143 mm Višina stroja: 2.232 mm Teža stroja: 6.100 kg OPREMA: Krmiljenje: MORI MSX-850 II Nastavitev za merjenje orodja Cedsx Rvgzjpfx Afnegp Enota za odjemanje delov Transporter za ostružke Rezervoar za hladilno tekočino Vpenjalni sistemi in gnana orodja

Stanje: dober (rabljeno), Leto izdelave: 2008, V dobrem tehničnem stanju in popolnoma delujoč. Leto izdelave: 2008. Dodatna Y-os: +-60 mm Največja hitrost vretena: 3.000 min-1 Moč vretenskega motorja: 22/18,5 kW Največja hitrost pogonskih orodij: 6.000 min-1 - Vpenjalna glava 300 mm s prehodom 90 mm, vretenjak A2-8 - Povečana moč in navor 25/30 kW, 1.000/1.300 Nm - Premer struženja 420-500 mm - Dolžina struženja 1.250 mm - C-os, pogonska orodja - NC-konjiček, popolnoma programirljiv, ločen motor Codsxdcigspfx Afnegp - Povečana moč Z-osi - Nov transporter za odrezke

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of turret heads: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 mm - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° Csdex Tvkropfx Afnegp TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 mm - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW SUB SPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 mm - Max. machining diameter: 190 mm - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° - Travel: 760 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 42 kVA WEIGHT AND DIMENSIONS - Footprint: 4,414 x 2,370 mm - Machine height: 2,115 mm - Machine weight: 6,200 kg OPERATING HOURS - Power-on hours: 15,525 h - Operating hours: 12,865 h EQUIPMENT - Control: Mitsubishi MSX-850II - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measurement system: Renishaw - 3-color status light - Tailstock function - Coolant tank - Chip conveyor: right side - Spindle cooling - Parts catcher - Bar feeder: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of fixed tool holders: 10 - 3-jaw chuck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 356 mm, izvrtina vretena: 81 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 100 mm, pomik po osi Z: 795 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 2.220 mm, skupna dolžina: 3.100 mm, skupna širina: 1.920 mm, skupna masa: 6.200 kg, prehod palice: 80 mm, Gib pinole konjička: 734 mm, Oprema: dokumentacija / priročnik, CNC Lathe Mori Seiki NL2500Y/700 – with Y Axis – Used & Fully Refurbished, Immediately Ready for Use Machine in excellent condition, fully overhauled by qualified technicians and fully operational. Suitable for precision machining with Y axis and driven tools. Main Data: - Year of manufacture: 2005 - CNC: Mori Seiki MSX-850 - Max swing diameter: 755 mm - Max turning diameter: 356 mm - Max turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4000 rpm - 12-station turret - Driven tools up to 6000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X travel: 260 mm - Y travel: ±50 mm - Z travel: 795 mm - Rapid traverse X/Z: 30 m/min Other Features: - Tailstock (travel 734 mm, MT3 taper) - Belt chip conveyor - Tool presetter - Parts catcher Dimensions and Weight: - Footprint: 3100 x 1920 x H 2220 mm - Weight: 6200 kg Machine is supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar holders and standard toolholders) Cedsvw Ackjpfx Afnegp The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for operation.

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN Cgodpov I Tx Rofx Afnjp MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar diameter: 80 mm - Max. machinable diameter: 366 mm - Minimum resolution C-axis: 0.001° TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 280 x 785 mm - Y-axis travel: +/- 50 mm - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW TAILSTOCK - Tailstock type: Numeric - Taper type: MT5 - Distance between centers: 705 mm Cgjdpjxxb Tysfx Afnsp ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 39 kVA - Power-on hours: 24,151 h - Operating hours: 5,144 h WEIGHT & DIMENSIONS - Required space: 3,800 x 2,143 mm - Machine height: 2,232 mm - Machine weight: 6,100 kg EQUIPMENT - Control: MORI MSX-850 III (Mitsubishi 720BM) - Tool measuring probe - 3-color status light - Coolant tank - Chip conveyor - Parts catcher - Bar feeder preparation - 3-jaw chuck: hydraulic - Number of driven tool holders: 5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 755 mm, stružna dolžina: 750 mm, premer struženja: 365 mm, največja hitrost vretena: 4.000 obr/min, največja hitrost vrtenja: 6.000 obr/min, Mori Seiki NL 2500 SMC/700 with Sub Spindle TECHNICAL DETAILS Control: MSX-850III Main spindle interface: A2-8 Sub spindle interface: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated sub spindle head motor: 11 kW C-axis: main and sub spindle Motor starting torque: 640 Nm Swing diameter: 755 mm Maximum machining diameter: 365 mm Maximum machining length: 750 mm Cgsdpfx Aewqc T Usfnsp Driven tool speed: 6,000 rpm Direct drive motor for driven tools: 5.5 kW Turret index time: 0.2 s Turret stations: 12 positions, all powered Rapid traverse speed: 30 m/min (X- and Z-axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measuring equipment: dual-arm automatic tool measurement with Renishaw system Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Schunk three-jaw chuck 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts catcher - Foot pedal for independent open/close of main and sub spindle chucks - Knoll filter system with high-pressure pump - Transformer - Documentation

Stanje: rabljeno, Leto izdelave: 2000, Stružnica Mori Seiki SL 200 MC, letnik 2000 Cgsdpfx Afsxyvkvsnep