CNC stružno-rezkalni center

Mori Seiki Duraturn 2550

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Bridgeport VMC 600 ECO Machining Centre Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of Manufacture: 2012, in excellent original condition The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE-compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control: HEIDENHAIN ITNC 530 Traverse paths (X/Y/Z): 600/410/520 mm Rapid traverse (X/Y/Z-axis): 40/40/20 m/min Worktable dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeatability: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the Machine: For sale is a Bridgeport VMC 600 EC machining centre equipped with a Heidenhain ITNC 530 control. This machining centre is in very good original condition. It comes from a company where it was used only lightly for training purposes. The control is very user-friendly. The linear guides are regularly lubricated by the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Hjdpfx Afoxtxk Seajp Take the opportunity to view and test the Bridgeport VMC 600 EC under power at our facility. Further milling machines from well-known manufacturers can be found on our website.

Stanje: dober (rabljeno), TECHNICAL DATA AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for forward ejection: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg Hedou Uic Tepfx Afaep SCOPE OF DELIVERY Includes (not exhaustive): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of delivery as per photos We do not guarantee the correctness, completeness or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, CNC Control: FANUC Series 31i-A5 X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis travel (mm): +160 / -180 C axis rotation (degrees): 360 Number of pallets: 1 Table size (mm): Ø500 Table load capacity (kg): 300 Cutting feed rate (mm/min) X,Y,Z: 50,000, 50,000, 40,000 Max. rapid traverse (m/min) X, Y, Z: 50, 50, 40 Spindle speed (rpm): 12,000 Hjdpoydh Hlsfx Afasp Spindle power (kW): 18.5 / 15 Spindle taper: BT-40 Torque (Nm): - Tool changer type: Chain Tool changer positions: 61 Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant: Yes EQUIPMENT Rotary table with digital units: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil separator Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Hsdpfxerx Rxtj Afasp Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: rabljeno, številka stroja/vozila: 008438, Maksimalna širina panela: 4500 mm Maksimalna dolžina panela: 4500 mm Maksimalni iztek glavnega žaginega lista: 50 mm Število vpenjalnih klešč: 8 Hedpjyngy Sefx Afaop

Stanje: rabljeno, Leto izdelave: 2016, Swing diameter: 366 mm Turning length: 700 mm Control: Celos Mitsubishi M730U Swing diameter over bed: 920 mm Swing diameter over cross-slide: 742 mm Max. spindle speed: 4,000 rpm Main spindle drive power: 18.5/18.5/15 kW Max. bar diameter: 80 mm Number of tool stations: 12 positions Tool holder: BMT 80 X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Tailstock quill: MT5 Operating hours: approx. 20,564 h Power-on hours: approx. 28,664 h Machine weight: approx. 4.7 t The machine has been overhauled with the following components: - Ball screws on X, Y and Z axes - New main spindle - Complete maintenance package Hodpfx Afeyvvt Sjaop - Fully re-adjusted and measured As a result, the machine is in an as-new technical condition. There are 2 machines available. Price is per unit. Technical features: - Turret, 12 positions BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Projection length for driven tools: 100 mm - Scraper belt chip conveyor - Coolant system with increased pressure, 5 bar Accessories: - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center tip - Mechanical I/F for oil mist separator, 150 mm - 4-color signal light - EtherNET I/P interface for automation Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and specifications as well as prior sale are subject to change!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, CNC obdelovalni center DMC 635V Leto izdelave: 2006 Krmilnik: Heidenhain TNC 530i Delovne ure krmilnika: cca 58.400 h Ure programskega delovanja: cca 19.980 h Po nalepki v elektro omari sta bila vreteno in motor zamenjana januarja 2019 pri 10.660 h. Za to ni dokazil. Stroj deluje mirno. Pomiki osi: X 635 Y 510 Z 460 Vpenjalo orodja: SK 40 Menjalec orodij na 20 mest Miza: 790×560 S transporterjem za ostružke Teža cca 3700 kg Ponudba velja izključno za podjetja v skladu s §14 BGB Hedpfx Asw Tir Usfajp Prodaja zasebnikom ni možna.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Hjdpfowyv Nzsx Afasp Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 250 mm, stružna dolžina: 730 mm, premer struženja: 500 mm, največja hitrost vretena: 1.800 obr/min, CNC stružnica CK 6150 s plosko posteljo Ponujamo novo CNC stružnico, model CK6150. Ta stroj uporabljamo tudi v lastni proizvodnji, zato si ga lahko pred naročilom ogledate v delovanju. Stružnica CK 6150 ima plosko posteljo in kaljene vodila, kar zagotavlja dolgo življenjsko dobo stroja. Stroj je standardno opremljen s CNC krmilnim sistemom GSK. Po želji lahko namestimo tudi Fanuc ali Siemens CNC sistem. Glede na zahteve kupca je možno montirati revolversko glavo za 4, 6 ali 8 orodij. Stroj je možno opremiti s hidravličnim vpenjalom, kar bistveno poenostavi nameščanje obdelovancev, ter z hidravličnim konjičkom. CK 6150 je lahko dodatno opremljen z nosilnim ogrodjem za natančnejšo obdelavo dolgih kosov. Tehnične specifikacije: Model: CK 6150 x 1000 Hedpfxexdmgvs Afaop Največji premer obdelovanca nad posteljo: 500 mm Največji premer obdelovanca nad suportom: 250 mm Največja dolžina obdelovanca: 1000 mm Največja dolžina struženja: 730 mm Premer vretena: 82 mm Hitrost vretena: 150–1800 min⁻¹ Moč glavnega motorja: 7,5 kW Mehanska glava (hidravlična opcijsko) Premer vpenjala: 250 mm 4-pozicijska orodna glava (6 ali 8 pozicij opcijsko) Največja velikost orodja: 25x25 mm Teža stroja: 2700 kg Dimenzije stroja: 2650 × 1700 × 1820 mm Dobavimo lahko tudi druge modele stružnic serije CK: CK 6140 – delovna dolžina: 550/750 mm CK 6150 – delovna dolžina: 1000/1500/2000 mm CK 6160 – delovna dolžina: 1000/1500/2000 mm CK 6152E – delovna dolžina: 1000/1500/2000/3000 mm CK 6165E – delovna dolžina: 1000/1500/2000/3000 mm CK 6185E – delovna dolžina: 1000/1500/2000/3000/4000 mm CK 61100E – delovna dolžina: 1000/1500/2000/3000 mm CK 61125E – delovna dolžina: 1000/1500/2000/3000 mm

Stanje: dober (rabljeno), The driven tools listed here, VDI 50, are designed for a tool turret manufactured by SAUTER. They are in good condition and fully functional, previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Article No.: XVI 24275 Hodpfjbql S Hsx Afajp 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT Article No.: XVI 24277 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany