Stroj za vrtanje CNC

MORBIDELLI FLEXA 912

Stanje: rabljeno, številka stroja/vozila: 005449, Pozicija 1: Naprava za obračanje plošč MORBIDELLI-FLEXA 912+FLEXA 902 Pozicija 2: CNC vrtalni stroj MORBIDELLI-FLEXA 912+FLEXA 902 Itjdpfx Alswucl Ee Nsf Pozicija 3: Horizontalna pretočna vrtalna in čepilna linija MORBIDELLI-FLEXA 912+FLEXA 902

Stanje: dober (rabljeno), Leto izdelave: 2019, CNC throughfeed machining center with dual clamp drive in X-axis direction and gantry construction in Y-axis direction. The second gripper enables sizing down to 15 mm as well as continuous milling movement in the X-axis direction. The workpiece is measured in length (X-axis) using a sensor. Working area: X-axis 3,500 mm Y-axis 950 mm Z-axis 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Iodpfx Aoxrahcsl Netf Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic tool loading or unloading into/out of the machine. Alternatively, can be used as an additional tool station for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter 8 mm; lengths: 20, 25, 30, 35, or 40 mm Front and rear air cushion tables, foldable Machine software WOODFLASH including: - CNC board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision detection for WOODFLASH on the machine Workpiece release at the rear side of the machine Machine delivered without tools and HSK holders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Isdpjuu Ntgsfx Al Notf Automatyczny pomiar długości narzędzia

Stanje: rabljeno, številka stroja/vozila: 006639, Delovno območje os X: 2600 mm Delovno območje os Y: 900 mm Itjdpfx Aljwuz Hho Nef Število vrtalnih vreten: 22

Stanje: rabljeno, Leto izdelave: 1991, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 40 mm, skupna masa: 4.000 kg, Taper: PS25 CNC control: Tria 6000 Motor power: 5.5 kW 4 units available Itodpoua Arfjfx Al Nof

Stanje: dober (rabljeno), Koda: 0190 Znamka: MASTERWOOD Model: PROJECT TF 100 - CE standard Iodpfxsw Emgbs Al Njtf CNC stroj za vrtanje po točkah v pretočnem načinu, primeren za obdelavo plošč, pohištva, pohištva po meri, kuhinj, kopalniškega pohištva, mizarske delavnice in druge aplikacije – CE standard. Lastnosti: Robustna vpenjalna naprava za premikanje plošč, ki drsi po linearnem vodilu s prednapetimi krogličnimi ležaji ter se pomika prek krogličnega vretena za visoko natančnost in togost. Opremljeno z brezkrtačnim motorjem. Delovna miza: miza z prostovrtečimi gumiranimi valji za gladek sprejem in izmet plošč. Premikanje plošč po zračni blazini za preprečitev praskanja občutljivih površin. Potiskalo plošč za gladko in natančno premikanje. Dolgitudinalni potopni referenčni prislon. Avtomatsko odčitavanje dolžine plošče. Obdelovalna enota: vrtalna glava z navpičnimi in vodoravnimi vreteni ter enoto za utore (žaganje). Centralni priključek za odsesavanje odrezkov. Numerični krmilnik s PC-jem: Windows operacijski sistem – mrežna povezava. MASTERWORK programska oprema: Masterwood sistem za avtomatsko risanje in programiranje – vrtanje in optimizirano programiranje vrtalnega cikla. Tehnični podatki: Osi X-Y-Z pomik v mm: 1670-1330-87 Maks. hitrost pomika osi X-Y-Z v m/min: 25-50-25 Delovno območje: širina min/max mm 80/1000 – dolžina min mm 250 – dolžina max neomejena – debelina min/max mm 10/60 Vrtalna glava: število 5 neodvisnih navpičnih vreten po osi X, 5 neodvisnih navpičnih vreten po osi Y; 2 dvojni vodoravni vreteni po osi X, 1 dvojno vodoravno vreteno po osi Y Razmak med vreteni: 32 mm Moč motorja: 1,7 kW Hitrost vrtenja vreten: 4000 obr/min Enota za žaganje – moč motorja: 1,7 kW – premer žaginega lista: 125 mm – 4000 obr/min Delovni zračni tlak: 7/8 bar Mere (d/š/v): 2400 x 1990 x 1600 mm Teža: 1300 kg

Stanje: rabljeno, Leto izdelave: 1999, Lokacija skladišča: Nattheim Itedpfx Alevvi Rxe Nof

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), I am selling a HIRZT Livra/B throughfeed CNC drilling machine, year of manufacture 2009. Maximum working width: 820 mm Configuration: 14 + 6 + 2 drilling spindles Return system that transports the workpieces either back to the operator or to the rear in throughfeed operation. Isdpfx Aljnxqdws Netf Overall dimensions: 2000 x 2000 (+800 +800 mm) Total weight: 1350 kg Comes with complete documentation and CE certification. Very good condition. Available immediately.

Leto izdelave: 2009, stanje: rabljeno, Used machine Year of manufacture: 2009 Condition: refurbished Description: The concept of the machine is extremely simple. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece inside the machine. After activating a foot switch, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below so that the generated chips do not remain on the workpiece as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece length can be unlimited, as it is fed towards the drilling unit (X-axis). The drilling spindles are freely programmable, either individually or as a block, and move along the Y-axis. The drilling depth as well as the horizontal drilling units are controlled via the Z-axis. Once all drilling operations are completed, the workpiece is returned to the loading side, or optionally, conveyed to the unloading side. Whereas conventional machining centers require the workpiece to be clamped using vacuum, and the vacuum clamps must be adjusted to the size of the workpiece, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Good price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest of spaces: - Line boring - Construction drilling Itsdpfxjwmhmfs Al Nsf - Fitting drilling - Cabinet connector drilling Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled feed of the panel via crossing pneumatic clamping gripper - Y: NC-controlled drilling head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs in the infeed area - Pneumatic clamping gripper for transport - Pneumatic lockable side stop with rollers - Control via PC running Windows XP (1 GB flash memory) - 8'' color screen - Alphanumeric multifunction keyboard incl. mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000mm - Maximum drilling width: 800mm - Maximum feed speed (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill diameter: 35mm - Maximum total drill length: 70mm - Drill shank: 10mm with clamping surface - Connected load: 2.5 kW - Extraction connection diameter: 100mm - Required pressure: 6 bar - Working height: 900mm - Folding roller support at the infeed side, 500 x 750mm Dimensions: 1,650 x 1,920mm Availability: short-term Location: North Rhine-Westphalia

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: QPCOCE754005004, skupna masa: 1.350 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 16 A, Subscribed, DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County, VAT no. RO27987796, registration no. 2A0522, through insolvency practitioner Godorogea Daniel-Lucian in his capacity as judicial liquidator of ELEMENTO MOBILI S.R.L. - in bankruptcy, with registered office in Dej, 6 Dumbrava Roșie Street, ground floor, ap. 1, Cluj County, registered with the Trade Registry attached to Cluj Tribunal under no. J12/2389/2016, company registration code 36225390, appointed pursuant to Civil Judgement no. 1278 dated 03.07.2025 delivered by the Specialized Tribunal Cluj in case no. 442/1285/2025, organizes a public auction with ascending bids for the sale of the asset specified in this announcement. The first auction will take place on 08.04.2026 at 15:00, at the headquarters of DDG Insolvency I.P.U.R.L. in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County. If not awarded, the auction will be repeated on 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, and 13.05.2026, under the same conditions and at the same time. For asset viewing, the judicial liquidator will set a viewing day for 06.04.2026 between 09:00 and 12:00. Interested parties are invited to contact the judicial liquidator at 0763 478 619 and express their intention to attend before the scheduled date. During the organization of the public auction sessions, the liquidator will also organize additional viewing days, which will be communicated to interested parties. Upon adjudication, the judicial liquidator will issue a tax invoice for the value of the awarded assets. Conversion into Romanian lei will be made at the exchange rate of the National Bank of Romania on the date the tax invoice is issued. Itjdpfsyfmrpox Al Nof The auction step/increment is 5% of the starting price. The terms of reference for auction participation will be prepared by the judicial liquidator according to industry practice, will contain the auction participation rules and will be sold by the insolvency practitioner at the price of 500 lei + VAT. It can be purchased at the liquidator’s office or by phone and will be sent to the participant by email. The participation guarantee is 10% of the starting price. This, along with the auction registration documentation, must be submitted at least 24 hours before the auction date at the liquidator’s office. The participation guarantee will be deducted from the purchase price for which the bidder has been declared winner and will be returned to participants who have not been declared winners. In case of identical bids, the winning bidder will be the one who commits to paying the full amount in the shortest term. The payment term is 5 working days from the adjudication date. If the remaining amount is not paid, the bidder will forfeit the advance paid as a guarantee and will not be allowed to participate in future organized auctions.