Kratka stružnica CNC

MIYANO BNA 42 MSY

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Fodpfox Hgl Hjx Abtegc Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. Fgodowx Rafspfx Abtsc X 750 mm Y 400 mm Z 500 mm 10.000 vrt/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 31.000 h, Funkcionalnost: popolnoma funkcionalen, CNC sliding headstock automatic lathe Manufacturer: STAR Model: SV-38R Year of manufacture: 2014 Fgodpeytq Ahsfx Abtoc Equipped with: FANUC 31i-B control, Synchronised spindle, Backworking capability, Driven tools, Turret with B, Y, X, and Z axes, 2x C-axis, Y2-axis, High-pressure pump, Oil mist extraction system, Parts conveyor, Chip conveyor, Fire extinguishing system, Can be used as short or long turning machine Bar loader magazine FMB Turbo 5-55

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 53.776 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, premer vrtljive mize: 500 mm, največja hitrost vrtenja: 18.000 obr/min, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Fgedjwxd Agepfx Abtjc Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be organized throughout Europe at an additional cost, if required. Prices are plus VAT. Viewing by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your machine? For further information or contact options, please visit our website.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm Fedpfx Aeu Elkqebtogc - Minimum C-axis resolution: 1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm TOOL HOLDER 1 - Number of stations: 9 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm FRONT UNIT - Number of stations: 3 BACKWORKING - Number of stations: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 73,252 h - Spindle hours: 50,900 h ACCESSORIES - Control: Fanuc 18iT - Driven guide bush - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: IEMCA CH 220/32L - Fire extinguishing system * NB: Functionality not guaranteed. Should be checked by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING Fsdpfx Aouha Umobtegc - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 67 h, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.300 obr/min, potovalna razdalja osi X: 615 mm, pomik osi Y: 260 mm, pomik po osi Z: 1.585 mm, skupna masa: 16.600 kg, proizvajalec krmilnikov: MAZATROL, število osi: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine is equipped with a robust tool magazine holding 72 positions and includes both a main and a second spindle to expand its capabilities. If you are looking for high-quality turning and milling functions, you should consider the Mazak INTEGREX i-200 S turning-milling center. Contact us for further details. • Operating time: approx. 68 hours • Availability: Immediate • Key Features: • Full simultaneous 5-axis machining • Main spindle + sub spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and work area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm Fgsdpfey Sltgox Abtsc • Bar capacity (main spindle): Ø102 mm • Bar capacity (sub spindle): Ø65 mm • Maximum support weight (main spindle): 650 kg • Maximum support weight (sub spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blower system: Included • Additional equipment: Heavy-duty spindle HD1; removal of standard spindle cylinder and chuck • Sub spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travel • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: tool breakage detection in magazine; overload detection • CNC functions and software • 5-axis machining package • 5-axis tool radius compensation • Cylindrical interpolation • Polar coordinate interpolation • Synchronous thread cutting with milling spindle • Cooling and preparation • Coolant through spindle: 7 MPa • Prepared for mist extraction system • Highlights • Practically new condition with only approx. 68 hours operating time • Very extensive factory configuration • Full simultaneous 5-axis machining • Main and sub spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings compared to new Additional Equipment • Chip and parts handling • Side chip conveyor - Consep type • Belt conveyor for parts • Bar loading and workpiece handling • LNS QLS II bar loader • Interface kit for bar loader • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Other accessories • Mounting anchors for the machine • 3-color machine status signal light Technical Specification

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Fodpfx Ajxf Hqqjbtsgc Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation Fedox D Irmopfx Abtsgc • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 850 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MSX-711 IV, obremenitev mize: 500 kg, število mest v zalogovniku orodij: 60, dolžina orodja: 500 mm, premer orodja: 140 mm, teža orodja: 12 g, Horizontal Machining Centre MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining centre, engineered to deliver exceptional precision, reliability, and continuous productivity, even during the most complex machining operations. Key features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Max spindle speed: 14,000 rpm Fedpfx Aewxygzsbtogc Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travel): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle centre – pallet surface distance: 100 – 830 mm Spindle nose – pallet centre distance: 100 – 950 mm Max workpiece size: Ø800 x 1,000 mm Rotary Table: Table size: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Maximum pallet load: 500 kg Continuous table rotation: 360,000 positions Feeds: Rapid traverse (X/Y/Z): 50,000 mm/min Cutting feed (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max tool diameter: Ø140 mm (with adjacent tools: Ø70 mm) Max tool length: 500 mm Max tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chiller and transformer Retractable tool presetting sensor Comprehensive technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production environments, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, assuring highly complex machining processes with outstanding speed and precision.