3D koordinatni merilni stroj

Mitutoyo QS250Z

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), število osi: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010 and features a joystick box, various clamping claws, and profile rails for versatile setup options. It is equipped with a MAG1 mount as well as short and long spring clamps for precise optical measurement tasks. Take advantage of the opportunity to purchase this Mitutoyo Quick Scope QS-250 Z optical measuring instrument. Contact us for further details regarding this unit. Additional Equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping claws: 35-37, 39-41, 55-57 • Profile clamping bar with front-end connector • Profile clamping bar without front-end connector • Connector with mounting grooves • MAG1 mount • 15° spring clamp (short) • 15° spring clamp (long) • Threaded clamp holder • 30 mm dowel pin • Guide comb 40/10 mm with longitudinal groove only • 120° prism with spring clamp • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • XY accuracy: (2.5 + 0.006 µm) • Z accuracy: (5 + 0.006 µm) Dodpfx Aox D D Absplecg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Dedpfxeywtwwj Apljcg Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Ce Mitutoyo Quick Scope QS-250Z à 3 axes a été fabriqué en 2001. Il dispose d’une plage de mesure de X=200 mm, Y=250 mm, Z=100 mm et d’une vitesse de déplacement maximale de 80 mm/s. L’appareil est équipé d’une caméra couleur CCD 1/3" et de différents modes d’éclairage qui améliorent la visibilité et la précision. Le Mitutoyo Quick Scope QS-250Z est idéal pour l’analyse détaillée de composants et vous offre la possibilité d’acquérir ce MMC. Contactez-nous pour plus d’informations sur cet appareil. Équipement supplémentaire • Logiciel : QSPAK Version 3.1 / Système d’exploitation : Win10pro Avantages de la machine Caractéristiques techniques de la machine • Dimensions de la machine (LxPxH) : 465 mm x 815 mm x 663 mm / poids (kg) : 76 kg • Poids maximal de la pièce : 10 kg • Dimensions de la plaque en verre : 269 mm x 311 mm Dcjdpfsx Nr Tbsx Apljg

Stanje: zelo dobro (rabljeno), Mitutoyo Model: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality CNC vision measuring machine Mitutoyo QS250Z from 2017 in excellent condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics engineering, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Determination of distances, radii, angles, and diameters - Measurement of holes, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and protocol creation via Mitutoyo software Measurement is performed contactlessly via a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is unsuitable. Thanks to CNC control, automated measurement processes are possible – perfect for recurring inspection routines. Technical Data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse protection: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see images) Mitutoyo QS250Z main unit Joystick box Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form Manuals & documentation Various electronic boards (see images) Other accessories as shown (Subject to changes and errors in technical data. All information is without guarantee!) Dodeynkbaepfx Aplecg For further questions, please feel free to contact us by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Djdoyyuvtepfx Aplscg Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Dcedjv E R E Aspfx Apleg Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Dcsdpjuz If Nefx Aplsg Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, trajanje garancije: 12 meseci, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 200 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Completely overhauled multisensor measuring device Mahr MS 222 (optical measuring instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or via shipping company, worldwide delivery possible! Online or on-site demonstrations with customer parts as well as application-specific consulting provided by accredited Profitech inspection laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, norm-compliant accuracy verification, certification, and comprehensive acceptance documentation. Customized training programs also available as online courses. Rental, hire-purchase, or financing available directly via Profitech, with no bank required. Measuring device can be configured individually to customer needs. Measuring range: 200 x 200 x 200 mm Load capacity (glass plate): 10kg Scale resolution: 0.1μm Max. traverse speed: 150mm/s Dimensions: 900 x 750 x 950mm Machine weight: 170kg Control cabinet weight: 90kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) available on request Retrofit 2025 Including PC and software Maximum traverse speed: 150mm/s Dcsdpfjglp Nqsx Apljg Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Sample image by manufacturer *Commissioning, on-site calibration, and training are not included

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 141447, Tehnične lastnosti: Največji merilni razpon v mm Os X 500; os Y 500; os Z 500 Dimenzije v mm Brez podnožja: dolžina: 1160; širina: 1080; višina: 1803 S podnožjem: dolžina: 1170; širina: 1090; višina: 2480 Masa CMM v KG: Dcedpfxjxxvbrj Apleg brez podnožja: 350 s podnožjem: 445 Največja dovoljena masa obdelovanca v KG: 100 Oprema vključuje: Koordinatni merilni stroj (CMM) s podnožjem Krmiljenje (integrirano) Upravljalna konzola Programska oprema (Calipso 5.4) Dokumentacija Merilni sistem Glavni tipalni element Referenčni standard Nosilec za menjavo tipal Stanje stroja: V DELOVANJU

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, FULLY OPERATIONAL WITH DOUBLE Y-AXIS - FANUC 31iA2 CONTROL - MAIN SPINDLE: 65mm BAR CAPACITY, 18KW POWER, ASA 6, 4500RPM - SUB SPINDLE: 51mm BAR CAPACITY, 11KW POWER, ASA 5, 5000RPM - LIVE TOOLING: 7KW POWER WITH 40Nm TORQUE ON BOTH TURRETS (SUPERMILL 65mm BORE) - Y-AXIS ON BOTH TURRETS (UPPER Y-TRAVEL +50/-50mm, LOWER Y-TRAVEL +20/-50mm) - PART CATCHER TYPE G - DISTANCE BETWEEN SPINDLE NOSES: 870mm - MAX TURNING DIAMETER: 225mm - RAPID TRAVERSE Z: 36m/min, X: 18m/min - OVERSIZED COOLANT TANK 500L WITH CHIP CONVEYOR - TURRET COOLANT PUMPS: GRUNDFOS CRK4-100/10, DOUBLE STAGE, 3-12 BAR WITH FILTERS - COOLANT JETS ABOVE SPINDLES Djdpfx Apeyrb Tnjlecg - WASH AND AIR BLOW THROUGH SUB-SPINDLE - AUTO SHUTDOWN - 3-COLOR SIGNAL LIGHT - LOAD MONITOR ON NT NURSE AXES - IEMCA MASTER 880 BAR FEED, YEAR 2003 - SUPPLIED TOOLHOLDERS AND COLLET HOLDERS SET INCLUDES: With the machine: 4 external tool holders 4 twin-opposed tool holders for simultaneous mounting of 2 opposing tools 6 boring bar holders 1 H32 parting blade holder 4 radial driven tool holders (HEIMATEC) 4 axial driven tool holders 1 Bellegrandi MSCNT70-A6” collet holder for BA and BD size 70 collets (with corresponding sleeves, main spindle side) 1 Bellegrandi MSCTNR70-A5” collet holder for BA size 70 collet (with spring ejector, sub-spindle side) Complete ‘Hand Jaw’ set (grippers) for parts ejector