Spotting press

Millutensil MIL 203

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Hfjdpfx Ashua Dqeb Esd Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: dober (rabljeno), Leto izdelave: 1992, Dvoranski žerjav, žerjav, električni vitel z jeklenico, dvižni mehanizem, motorni jekleni vitel, motorni vitel, koloturnik, vlečni vitel, škripčevje Hjdpfx Ael Tuvdjb Eofd -Proizvajalec: Stahl, žerjavni voz z električnim vitlom z jeklenico -Žerjavni voz: Tip GO 24 20 16 -Hitrost vožnje: 20 m/min -Razmik med kolesi: 800 mm -Jekleni vitel: Tip AS 2010 -Vlečna sila: 1000 kg / nosilnost 4000 kg -Hitrost bobna: 16 m/min / dvižna hitrost 4 m/min -Transportne mere: 1250/1180/V400 mm -Lastna masa: 356 kg

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Welding turntable Protec KT 1200 kg Motorized, infinitely variable tilt and speed control Motor 0.75 kW with remote control Hfjdpfxscrmyfe Ab Eed Foot switch Table diameter 1200 mm Height 1000 mm Length 1400 mm Width 1500 mm Speed range from 0.05 to 0.5 rpm

Stanje: kot nova (razstavni stroj), 600 kg load capacity welding positioner, height-adjustable with through bore 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.15 m Tilted height: min. 0.45 m, max. 0.95 m Speed range: approx. 0.01 - 1.3 rpm, with digital display Tilting angle up to 135° Hand and foot remote control with speed display Hjdpfodpuapsx Ab Ejfd Very robust design This positioner is also available from stock with 1000 kg and 3000 kg load capacity

Stanje: pripravljen za uporabo (rabljen), Mașină de rectificat ghidaje SFBZ 1800x4000 Lungime maximă de rectificare, mm: 4000 Lățime maximă de rectificare, mm: 1800 Hodouug A Eopfx Ab Esfd Distanța între coloane, mm: 2200 Înălțime maximă de rectificare, mm: 1250 Dimensiuni masă, mm: 4000 x 1800 Dimensiuni maxime ale pietrei de rectificat, mm: 630 x 100 x 305 Greutate maximă piesă de prelucrat, kg: 15.000 Greutate mașină, kg: 56.000

Stanje: zelo dobro (rabljeno), Leto izdelave: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle taper MK 5 Throat depth 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-speed 3.6 / 4.8 kW Clamping area, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Power feed • Forward/reverse operation • Motorized vertical adjustment (up and down) • Wide speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Hfsdpfetwzk Dox Ab Eod D - 44143 Dortmund - Wambel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Tischgröße 2600 × 1800 mm maximales Tageslicht 2200 mm Spannkraft 300 t Hodpfsrl Irkjx Ab Ejfd table size 2600 × 1800 mm maximum daylight opening 2200 mm clamping force 300 t

Stanje: novo, Drilling capacity in steel ----- 50 mm Motor ----- 4 kW Speed range ----- 25 ~ 2000 rpm Spindle stroke ----- 315 mm Throat depth ----- 350 ~ 1600 mm Spindle taper ----- MT5 Spindle feed ----- 0.04~ 3.2 mm/rev Hfsdpega Ty Njfx Ab Eod Cube table ----- 630 x 500 x 500 mm Column diameter ----- 350 mm Base ----- 2400 x 1000 x 200 mm Maximum distance spindle - base ----- 350 ~ 1220 mm Weight ----- 3500 kg INCLUDES * Hydraulic clamping * Coolant system * CE plug * SCHNEIDER electrics

Stanje: rabljeno, Leto izdelave: 1970, Drilling capacity in steel (diameter): 32 mm Arm reach: 1,000 mm Maximum workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. m W E B O Radial Drilling Machine Model: BR 32 V Year of manufacture: approx. 1970 Serial No. _____ Drilling capacity in cast iron/steel (through solid): max. 40 / 32 mm Boring (with 50% pre-drilled): 60 / 80 mm Hfjdpfxst H Smyo Ab Eod Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 steps/stepless: 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal travel of drill carriage: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/rev Spindle drive approx.: 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and spindle housing via hand lever • Automatic drill feed with depth stop via vernier • Stepless speed adjustment within three gear steps and 2 motor speeds, changeable via hand lever • Clockwise and counterclockwise rotation • Electro-motorized vertical adjustment of the arm via cross-switch • Ammeter for the drilling motor • Coolant unit with integrated coolant pump • Fixed drilling table approx. 800 x 600 x 600 mm high, vise, etc. Ideal machine for steel fabrication, toolmaking, and mechanical engineering! Condition: Older but good to very good – demonstration-ready Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0309, stiskalna sila: 200 t, Pressure: 200 t Table length: 2500 mm Table width: 2000 mm Max. stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Retracting force: 25 t Machine weight approx. (without operating materials): 50 t Column diameter: 210 mm Table swiveling speed: 25 mm/sec Table extension: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Approach speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of the press: 10,200 ? Surrounding maintenance balcony: 5,000 ? Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Table plate tiltable by 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in the ram center: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Functioning of the spotting press: Control operation modes: The control features "Manual" and "Semi-automatic" mode. In manual mode (joystick operation): - The table can be hydraulically extended and retracted at max. 30 mm/sec - The table can be hydraulically tilted up to the set angle at max. 25 mm/sec - The ram plate can be hydraulically lowered and folded by 90° and extended up to 180° - Pressureless movement is possible - Pressure can be set via the monitor - The speed can be adjusted between 1 and 10 mm/sec - An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled In semi-automatic mode: - The ram can perform rapid traverse up to 10 mm/sec - A pre-programmed cycle (input via monitor) can be executed. Example: - 30 t pressure - Upper limit 300 mm - Lower max. limit 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm only 10 mm/sec - Dwell time at set pressure or BDC 1 second - Return to upper stop Joystick function: The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible. Monitor view: On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible. In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed. The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for: - Table extension/retraction (two-hand operation active) - Table tilt up/down (two-hand operation active) Hfsdpfx Absfxyi Dj Ejd - Ram raise/lower (joystick active) - Ram plate lower/raise (two-hand operation active)