CNC obdelovalni center

Micromill Challenger MM430

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 760 mm, pomik osi Y: 430 mm, pomik po osi Z: 390 mm, največja hitrost vrtenja: 8.000 obr/min, obremenitev mize: 350 kg, premer orodja: 100 mm, Submission of a bid obliges the bidder to collect the machine on time by 31/03/2025! TECHNICAL DETAILS Control: Fagor 8055 X-axis: 760 mm Y-axis: 430 mm Z-axis: 390 mm Max. rapid traverse: 24 m/min Spindle Motor Continuous power: 5.7 kW Continuous power (1 hour): 7.5 kW Max. speed: 8,000 rpm Worktable Dimensions: 900 x 410 mm Max. load: 350 kg Tool Handling Max. tool length: 200 mm Max. tool diameter: 100 mm Max. tool diameter with free adjacent slots: 130 mm Max. tool weight: 8 kg Tool change time: 10 s Max. number of tools: 16 MACHINE DETAILS Dusdjv Ifl Njpfx Aplet Length: 2.2 m Width: 2.0 m Height: 2.4 m Weight: 3,000 kg Connected load: 15 kVA No additional tools or clamping devices included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed Duedpfx Apoylw Stolet • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: rabljeno, Leto izdelave: 2007, Fanuc Robodrill Alpha T21iEL stroj s 5-osmi leto izdelave: 2007 krmilnik Fanuc 31i Manual Guide Pomiki osi: -X-700mm -Y-400mm -Z-330mm -C-360 stopinj -os B Dodpfx Apoyg Hl Eelout 4. in 5. os: rotacijska miza Tsudakoma TN130 vretenska hitrost do 24.000 rpm Vretenasti stožec BT30 Magazin za 21 orodij -dokumentacija -kad z črpalko za hladilno tekočino

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.407, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, teža obdelovanca (maks.): 500 kg, skupna višina: 3.200 mm, skupna širina: 3.200 mm, širina mize: 600 mm, višina mize: 2.400 mm, dolžina mize: 600 mm, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 10.000 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 15.000 W, število vreten: 1, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, La MIKRON UCP 800 Duro de l’année 2018 est un centre d’usinage 5 axes haute performance, équipé d’une commande Heidenhain iTNC 530. La machine offre des courses de 800 x 650 x 500 mm (X/Y/Z) ainsi qu’un axe C avec plage de pivotement sans fin de 360°. Les types de broche/adaptateur NCD 150 PL et NCD 200 PL avec raccord HSK-E63 sont installés. Le système de table représenté n’est actuellement pas monté. L’équipement comprend un convoyeur à copeaux, un système de refroidissement avec filtre ainsi que la documentation complète. La machine est disponible à l’enlèvement, chargement sur camion, et a très peu tourné dans l’ensemble. Dusdex D Ux Tspfx Aplot Les heures de fonctionnement parlent d’elles-mêmes : Control ON : 30 064 h Machine ON : 10 322 h Program Execution : 4 159 h Drives ON : 7 331 h Spindle ON : 4 231 h La machine est sous tension et peut être démontrée à tout moment.

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Dsdpfx Asvt D D Uspleut Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. We look forward to your inquiry. Dedpfx Apjh Dmamelsut STALEX Werkzeugmaschinen GmbH

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 s PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250x1250 mm - Number of pallets: 2 - Max. pallet load: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1,970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel Dedew D Hwwspfx Aplsut - Synchronized tapping - 3-color status light - Coolant tank * with high-pressure pump: 70 bar * internal coolant supply (through-spindle coolant) * paper filter * coolant chiller * cabin washing system - Chip conveyor - Tool measurement probe - Workpiece measuring probe: Renishaw RMP60 - Electrical transformer

Stanje: dober (rabljeno), Leto izdelave: 2007, Rabljeni stružni stroj OKUMA - Model: LT200-M TwinStar - Letnik: 2007 - vključuje transporter za ostružke - posoda za hladilno tekočino Dsdpfxev S Svvs Aplout - takoj na voljo

Stanje: rabljeno, Leto izdelave: 2006, Verigalni pomik - x 500 mm Verigalni pomik - y 450 mm Verigalni pomik - z 400 mm c-os 360° b-os 0 - 108° Vpenjalna površina: 500 x 380 mm Krmiljenje HEIDENHAIN - iTNC530 Dsdpsyvkuqsfx Apleut Hitrost vretena 20 - 18.000 min⁻¹ Število mest v menjalniku orodij 60 Vpenjalo orodja HSK 63 5-osni simultani obdelovalni center | DMG - DMU 50 eVo linear z NC zasučno-rotacijsko mizo, 60-kratnim menjalnikom orodij, dvojnim prijemalom, SKZ (40 bar) in transporterjem ostružkov. Dodatna oprema: - Heidenhain TS 640 infrardeči merilni tipalnik - Lasersko merjenje orodja - Trakasti filtrirni sistem Stroj je v vzdrževanem stanju. Za več tehničnih podrobnosti glejte ponudbo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Dedpfexwl T Usx Aplsut Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp