Tračna žaga

METORA MB330

Stanje: pripravljen za uporabo (rabljen), Obseg rezanja okroglo 90°/30°: 320mm/250mm, obseg rezanja kvadratno 90°/30°: 320mm/240mm, maksimalna kapaciteta profila: 500mm/320mm, največja višina obdelovanca: 320mm, izrez: 520mm, dimenzije tračne žage X/Y/Z: 4600mm/32mm/1,1mm, hitrost traku: 96m/min. Dimenzije stroja X/Y/Z: ca. 2200mm/1400mm/1400mm, teža: ca. 800kg. Ogled na lokaciji je možen. Kdjdpfx Alew U Uame Nok

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Kdjdpfepm U U Nox Al Nsk Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 3 meseci, vrsta hlajenja: voda, varilni tok pri 60% delovnega cikla: 500 A, varilni tok pri 100% delovnem ciklu: 400 A, For sale: Miller PipeWorx 400 565 AMP (500A @ 60%, 400A @ 100%) 380 Volt Year: 2013 Water-cooled Pulse function RMD process Program memory Electrode option Suitable for welding steel and stainless steel Completely overhauled, tested, and serviced. Test welding possible Includes: 1.0-1.2mm feed rollers, 2x PRO5000 welding torches, ground cables, gas hose, transport trolley, and 3 months warranty. Test welding is possible. A video of the machine in welding operation can be provided upon request. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside Europe using Euro pallets per shipment. All our machines have been serviced and are 100% ready for operation, unless otherwise stated. The pictures above show the actual machine. We can also offer other machine types, such as: Used, New, Mig, Mag, CO2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Ksdpfjx Rppcsx Al Nedk You always do business directly with Cjays Lastechniek and never with third parties.

Stanje: dober (rabljeno), Leto izdelave: 1992, Hydraulic punching machine, manufacturer hæwa, year 1992. Operating pressure: 400 bar, with electrically height-adjustable support table. Machine ready for operation. Kdjdpfx Alogbk R Us Nsk

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 1.400 mm, - Maximum working height: 7.79 m - Platform height (retracted): 5.79 m - Platform length (outside): 1.63 m - Platform length (extended): 2.54 m - Platform extension: 0.91 m - Platform width (outside): 0.74 m - Guardrail height: 1.10 m - Toe board height: 0.15 m - Height (retracted, incl. foldable guardrail): 2.11 m - Height (retracted, guardrail folded down): 1.75 m Kedpfxjxd Hnts Al Nodk - Length (retracted): 1.83 m - Length (retracted, with platform extension extended): 2.74 m - Max. occupants on platform (indoor/outdoor): 2/1 - Load capacity: 227 kg - Drive speed (retracted): 4.0 km/h - Drive speed (extended): 0.8 km/h - Gradeability (retracted): 25% - Turning radius (inside): zero - Turning radius (outside): 1.55 m - Lifting/lowering time: 16/29 sec - Proportional controls - Drive type: two-wheel front-wheel drive - Multiple disc brakes, two-wheel rear axle - Non-marking solid rubber tires, 30x11x20 cm / 12 x 4.5 x 8 in - Power supply: 24 V (4 x 6 V, 225 Ah batteries) - Hydraulic system tank capacity: 14.2 L - Sound/noise level (ground):

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3200 x 1960 x 1470 mm Kjdpfxsvz E Aze Al Nodk Weight: 1000 kg Total Power Requirement: 8.5 kW Plasma Cutting Machine ADVERTISING 1325-60A - Working area X-axis: 1300 mm - Working area Y-axis: 2500 mm - Cutting thickness: 0.5 – 8 mm - Cutting speed: 0–8000 mm/min - Power: 8.5 kW - Voltage: 400 V / 50 Hz - Plasma power: 60 A - Data transfer via USB interface - Dimensions: 3200 x 1960 x 1470 mm - Weight: 1000 kg Base Machine: The machine base frame and the gantry are robust welded structures, designed for both static and dynamic rigidity. The gantry is positioned along the Y-axis on the machine frame. The cross slide, which can move in both X and Z directions, is mounted on the gantry. Hardware / Control: The DSP control system enables flexible and direct intervention. With this DSP control, you can process your G-code files independently from a computer directly on the milling machine. Software: Comes with CAD/CAM software Vectric Cut2D PRO—ideal for creating machining programs for all applications. Software Features: - 32-bit & 64-bit Windows-based software - Compatible with Windows 7, Windows 8, Windows 10 - G-code (DIN 6625) - HPGL (*.PLT) - Simulation feature - Display of control codes (G-code or HPGL code) Applications: Suitable materials include iron, steel, aluminium, galvanized sheets, and titanium plates.

Stanje: dober (rabljeno), Leto izdelave: 2010, KBS 1051 ŽAGA HORIZONTALNO IN VERTIKALNO VPENJANJE AVTOMATSKI NADZOR PODAJA Avtomatska nastavitev kota tračnega lista 2010 KALTENBACH KBS1051 CNC REZALNA LINIJA. 15 METROV DOVODA. 12 250 mm ODVOZA. DOVODNI PREČNI TRANSPORTERJI. ODVOZNI PREČNI TRANSPORTERJI. Kdodpfx Aexmvrgol Njk Tehnični podatki: Največji delovni razpon [mm] 90° 1050 mm x 500 mm + 70° 980 mm x 500 mm -70° 960 mm x 500 mm +60° 900 mm x 500 mm -60° 880 mm x 500 mm +45° 740 mm x 500 mm -45° 700 mm x 500 mm +40° 680 mm x 500 mm -40° 635 mm x 500 mm +30° 525 mm x 500 mm Najmanjši delovni razpon [mm] 30 mm x 10 mm Pogonska moč [kW] 12,9 Hitrost rezanja [m/min] 15 - 150 Podajanje tračnega lista [mm/min] 0 – 600 Hitri podaj in povrat [mm/min] 6000 Material tračnega lista: bimetal in karbid Dimenzije tračnega lista (D x Š x V) [mm] 8 900 x 1,6 x 54 Naklon tračnega lista [stopinje] 1,5–10 Teža stroja [kg] 6 000 Dimenzije stroja (D x Š x V) [mm] 4 370 x 1 435 x 2 650

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Obratovalno območje VB750 Min. / maks. višina: 10 – 450 mm Min. / maks. širina: 50 – 750 mm Žaga Kapaciteta (v x š) 0°: 450 x 750 mm Kapaciteta (v x š) +/- 15°: 450 x 700 mm Kapaciteta (v x š) +/- 30°: 450 x 620 mm Kapaciteta (v x š) +/- 45°: 450 x 480 mm Kapaciteta (v x š) +/- 60°: 450 x 300 mm Ksdpfjw Nyu Ssx Al Nsdk

Stanje: rabljeno, Leto izdelave: 2011, skupna širina: 2.400 mm, skupna dolžina: 4.500 mm, skupna višina: 2.200 mm, Poids à vide : 3 000 kg Prix : Sur demande Comprend divers accessoires, pièces de rechange et équipements supplémentaires - Année de construction : 2011 - Documentation disponible : Oui Ksdpfx Aoxrz Hmol Nsdk - Marquage CE présent : Oui - Certificat CE présent : Non - Numéro de série : 289.112 - Commande : CNC - Marque du système de contrôle : Beckhoff - Puissance [kW] : 16,8 - Fabricant du résonateur : Hypertherm - Type de résonateur : Powermax 105 - Course de l’axe X [mm] : 3 000 - Course de l’axe Y [mm] : 1 500 - Épaisseur max. du matériau [mm] : 32 - Type de commande : Beckhoff - Dimensions de transport : 4 500 mm x 2 400 mm x 2 200 mm (L x l x h) - Poids de transport [kg] : 3 000 kg - Colis de transport [pcs.] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Lukas van Rossum

Stanje: rabljeno, Hydraulic punch, punching frame for use with JOKA HP-S type punching units Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - suitable for universal use of JOKA SW 20 or SWD 20 punching units - Throat depth of the punching units can be increased, units can be pushed through to the rear - Stroke release via electric two-hand operation - Hydraulic unit: HAWE, Type HCW 4 / 2.5-B 1/400-1 - Mounted on mobile frame Kdsdpfoltrmujx Al Nek Space required (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition