Horizontalna tračna žaga

Behringer HBP413 A

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment Kodpfx Alswka S Is Nsdk - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, hod: 800 mm, obratovalna hitrost: 9 mm/s, proizvajalec krmilnikov: CADMAN TOUCH, delovna širina: 12.000 mm, upogibna sila (maks.): 1.600 t, zadnji prislon: 1.000 mm, razdalja med stojali: 10.600 mm, vrsta upravljanja: CNC krmiljenje, število osi: 15, Only 100 operating hours (table / guides / tools as new condition) Installed, but never used in production – only for test purposes CNC T1 + T2 + T3 Front bending support arm 3 × HH 2600 backgauge modules, 3 × Z1 + R1 + Delta 1 Variable lower tool set VLA 50–150 mm Upper tool set LVD 505 V-axis adjustment 59.3 to 249.3 mm Thermotec oil cooler GC25T-35, max. 2200 kPa CADMAN TOUCH with high-quality software for press brakes Hydraulic upper tool quick clamping system Table width 500 mm Throat depth (frame): 1000 mm Max. bending length: 12000mm Distance between frames: 10600mm Max. press force: 1600T Distance table to ram: 1070mm Max. stroke: 800mm Table width: 500mm Throat depth: 1000mm Down speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. X axis travel: 600mm Number of CNC-controlled axes: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3) Control: CADMAN TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277,500kg Why do you need a 1600-ton press brake? Kdodpfoygkuwsx Al Nsk The required bending force depends on Material thickness Material strength Bending length Die opening If any of these factors increases, the required tonnage rises exponentially. A 1600-ton press brake is used when Thick sheets are being bent (20–60+ mm) High-strength materials are being processed Very long parts are being bent (6–10+ meters) Tight radii or deep bends are required For forming heavy welded structures such as Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding, defense, and marine: Hull sections Deck plates Bulkheads Reinforcement ribs Energy and infrastructure: Wind tower sections Power plant components Pressure vessel shell preforming Transformer tanks A 1600-ton press brake is used when It is not intended for sheet metal workshops, but rather for heavy industry, shipyards, steel fabricators, and energy projects. Please note: The information on this page is provided by us to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Potopna naprava Gebr., proizvajalec Bachhäubl HS2 12,5 - 12,50 m dolžina x 1,50 m širina x 1,50 m višina, čiste mere; - Letnik 1989; - Upravljanje s časovnim relejem za nastavitev časa potopa. - Lesen nastavek z okvirjem ca. 7 m dolg, pritisni element s 7 zobmi, ca. 7 m dolg; - Notranji bazen v dobrem stanju, Kdjdpfx Aljx Aktwe Nek - enostenska, brez lovilnega korita! - Teža ca. 8,5 tone - Transportne mere ca. 13,00 x 2,35 x 2,80 m - Naprava brez impregnacijskega sredstva in brez blata, - prosta za nakladanje na tovornjak!!

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 03890317, Machine number: 03890317 // Condition and details as per images Kdodpot A A Aqefx Al Nok

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Kedpeicbbzefx Al Nedk Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence Kdedpfx Aefu Ivzol Nok • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, 1000 mm nihajni premer, 760 mm maksimalni obdelovalni premer, 1540 mm maksimalna dolžina struženja, 4000 obr/min glavno vreteno, 76 mm kapaciteta palic, 12000 obr/min rezkalno vreteno, 18,5 kW, C-os s korakom 0,001 stopinje, Y-os -/+115 mm, ATC z 40 postajami, 22 kW motorji vretena, krmilje FANUC 31i, 3-čeljustna hidravlična vpenjalna glava, transporter za odrezke, hladilni sistem Ksdjw Azz Uspfx Al Nsdk

Stanje: rabljeno, ENAOSNI DROBILEC WEIMA Kedpfx Aljtqd Ndj Nedk MODEL WLK15 GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO

Stanje: novo, Leto izdelave: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between uprights: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed (max.): 140 mm / s R-axis travel range: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (dual guideway, aluminium) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motorized adjustment, linear guide and ball screw Backgauge finger with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design according to internationally recognized standards Electrical equipment according to internationally recognized standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg Kodpfx Alsfifg Hj Nsdk

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Kedou Agh Sopfx Al Njdk Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site