Stroj za upogibanje cevi

METALLKRAFT RB 42

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Kljdeudi Unjpfx Abxeu Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB Klodpfxoxcuicj Abxsu - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Leto izdelave: 2009, stanje: novo, Belt dimensions: 2000 x 100 mm Belt speed: 30 m/s Angle adjustable from 30° to 90° Power: 3 kW, 400 V 50 Hz Ksdpfsx Davjx Abxslu Weight: 200 kg Grinding rollers for pipe diameters: 3/4", 1/2", 1", 1 1/4"

Stanje: rabljeno, Tukaj vam ponujamo cevno krivilko JUTEC 6000D. Podatke najdete v priloženi ponudbi. Ksdpfx Aboxz Rz Ejxjlu Za vsa vprašanja smo vam z veseljem na voljo.

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Kledpfx Aou Ibyyjbxju Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm

Stanje: novo, Condition: New Delivery time: approx. 4 weeks from order Country of origin: Italy Price: €3,620 Max. diameter (steel tube): 38 mm Length: 245 mm Width: 300 mm Height: 320 mm Weight: 23 kg Max. bending moment (modulus): 19 cm³ Kljdpfxswiqxie Abxou Standard steel tube: 38 x 1.5 mm Furniture tube: 38 x 1.5 mm St35 (for hydraulic lines): 35 x 3 mm Stainless steel AISI304-318: 30 x 2 mm Stainless steel AISI308 (food-grade): 35 x 1.5 mm Soft brass: 42 x 1.5 mm Hard copper and aluminium: 42 x 1.5 mm Soft copper: 50 x 2 mm Conduit pipe (TAZ): 50 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Round steel (S275JO): 20 mm Flat bar (S275JO): 10 x 25 mm Flat iron (S275JO): 25 x 20 (upright), 25 x 1 mm Max. bending radius: 180 mm Min. bending radius: 36 mm Min. pipe Ø: 10 mm Max. bending speed: 2.8 rpm Motor: 0.9 kW Bending angle adjustment: 0–180° Single-phase motor 230V / 900W Electric motor brake Indicator light for overload warning Forged steel base – suitable for mounting on a tripod (tripod not included) 90° bend in 6 seconds Foot pedal No tools included OPTION: Tripod stand €320,-

Stanje: dober (rabljeno), Stroj za krožno upogibanje, stroj za upogibanje profilov, upogibni stroj, orodje za upogibanje cevi, upogibalec cevi, stroj za upogibanje cevi, stroj za upogibanje cevi z dornom - Stroj za upogibanje cevi z dornom: mehanski stroj za upogibanje profilov - Dodatna oprema: glej fotografije - Orodje: trenutno razpoložljiva orodja so namenjena škatlastim profilom - Skupne mere: 1200/740/H1220 mm Klsdpfxjh S Ti Es Abxou - Teža: 169 kg

Stanje: dober (rabljeno), Stroj za krožno upogibanje, stroj za upogibanje profilov, upogibni stroj, orodje za upogibanje cevi, upogibnik cevi, stroj za upogibanje cevi, stroj za upogibanje cevi z jedrom Kodex Nfhrepfx Abxjlu -Proizvajalec: Dako Gedore, elektrohidravlični upogibnik cevi na mobilnem podvozju -Premer cevi: 3/8" do 3" -Hod: 320 mm -Motor: AEG 1,5 kW -Dodatki: vklj. čeljusti za upogibanje do 2,5", glej slike -Transportne mere: 1140/1045/H1200 mm -Skupna teža: 389 kg

Stanje: pripravljen za uporabo (rabljen), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeatability for bending, rotation and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeatability: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station and work table. Documentation available. On-site inspection possible. Kjdpfx Abswwlkijxjlu

Stanje: novo, Leto izdelave: 2026, Mandrelless Tube Bending Machine RB 54 – NC controlled, with large program memory Item number: 4300054 NC control for setting bending angles Up to 50 programs storable High-quality, robust construction Rapid tool change Fully motorized drive Automatically returns to starting position TECHNICAL DATA General Information Maximum bending radius: 162 mm Maximum bending angle: 210° Bending speed: 2 rpm Torque: 2,341 Nm Dimensions and Weights Length (approx.): 600 mm Width/Depth (approx.): 220 mm Height (approx.): 470 mm Net weight (approx.): 107 kg Kedevk Scgjpfx Abxolu Bending Capacities Bending capacity, tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity, tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor power: 1.1 kW Connection voltage: 400 V Mains frequency: 50 Hz Location: ex stock - immediately available -