Tristrani prekucnik

MERCEDES-BENZ Atego MB 1223 K Kran Hiab 077B-2 HIDUO Funk AHK

Stanje: rabljeno, prevoženi kilometri: 163.380 km, moč: 170 kW (231,14 KM), prva registracija: 04/2016, vrsta goriva: dizel, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2016, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, žerjav, * Special equipment: * Hiab loading crane 077 B-2 HIDUO * Radio remote control * Grab control * 2 hydraulic extensions --* Trailer brake, 2-line * Trailer socket 24V / 15-pin * Work lights on cab rear wall (upper) * Audio system: CD radio (Bluetooth) * Exhaust tailpipe directed to road center * Battery 165 Ah * CB radio * Standard cockpit * Suspension: Front springs 5.1 t * Power windows * Tinted windshield * Noise reduction 80 dB(A) * Hydraulic pump (Meiller pump - 7 pistons - 270 / 63) * Cabin air filter for construction vehicles * Fuel tank: 180 L plastic * Heated air dryer * Reinforced engine brake * PTO MB 60-2C * Programmable special module * Burst pipe safety device for braking system * Acoustic reversing alarm (external warning signal) * Trailer coupling (central axle trailer) * Headlamp protection grille * Cab seats: Driver's seat armrest * Cab seats: Middle seat with seat belt, external sun visor * Air conditioning * Voltage converter 24V / 12V 10 A * Socket 12V / 15 A in dashboard * Additional 12V socket * Preparation for multimedia devices Additional equipment: * Emission standard EURO 6 * Front axle 5.3 t * Approach/front mirror * Exterior mirrors electrically adjustable, left * Rear axle differential lock * Cab: S ClassicSpace * Suspension: leaf/leaf * Rear springs 8.1 t * 6-speed transmission - Type: G 90 * Automatic transmission Power Shift * Urea tank (AdBlue): 25 L * Manual lifting roof (steel) Hodpfxsx Uuu Se Af Tofb * Info display 10.4 cm with auxiliary gauge * Engine 5.1 L - 170 kW diesel (OM 934) * Rear window * Driver's seat: standard air suspension seat * Rear axle stabilizer * Tachograph / EC control unit, automatic * Daytime running lights * Fixed rear underrun protection * Front underrun protection * Immobilizer * Perm. gross vehicle weight 11.99 t * Subject to error, changes, and prior sale

Stanje: novo, moč: 350 kW (475,87 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.425 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 3-363 --- Vehicle with day registration --- Mercedes Benz Arocs 5 3348 K 6x4 3900mm three-way tipper with Fassi F255A.2.24 xe-dynamic crane – AVAILABLE IMMEDIATELY! Mercedes Benz Arocs 5 3348 K 6x4: ENGINE OM471, inline 6-cylinder, 12.8 L, 350 kW (476 HP) * HIGH PERFORMANCE ENGINE BRAKE * SINGLE-PLATE CLUTCH * MERCEDES POWERSHIFT 3 * ABS, SWITCHABLE * SECONDARY OIL RETARDER * "M" DRIVER'S CABIN, CLASSICSPACE * ROOF HATCH/ROOF VENTILATION FLAP * DIGITAL TACHOGRAPH, 2nd GENERATION, ADR * MULTIMEDIA COCKPIT, INTERACTIVE * LANE KEEPING ASSIST * TRAFFIC SIGN ASSIST * ACTIVE BRAKE ASSIST 5 * CRUISE CONTROL Pavic three-way tipper body: * Dimensions: 4800x2420x800 mm * Subframe S700MC 6 mm * Side walls: Aluminium 60x800 mm * Floor: Hardox 450, 5 mm Crane Fassi F255A.2.24 xe-dynamic: slewing range 400° * Double knuckle boom system with PROLINK (overbending till 15°) * 6-function RCH or RCS radio remote control (linear levers) with display and XP system * FASSI stability control FSC incl. LMB11 * Standard color RAL 3020 traffic red – all cylinders black * Load hook * Fassi RCS radio max – 6 functions, 3 joysticks * Outriggers operable via remote control Financing / hire-purchase as well as leasing / partial amortization leasing available with our leasing partner. Hfodpfx Aoxnn Ebef Teb If you have any further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and amendments.

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 6.000 mm, skupna širina: 2.777 mm, skupna dolžina: 3.112 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, SHUTTLE XP500 40 polic po 500 kg Višina 6000 mm in 5650 mm Pripravljen za nakladanje, cena vključuje nakladanje na tovornjak Ponovno sestavljanje na zahtevo Hjdpexvccwofx Af Tsfb

Stanje: rabljeno, Leto izdelave: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing. Due to its vertical orientation, this machine series is the most flexible and productive machine of its kind, achieving an extremely high quality standard. In addition, the automatic return/rotation system for the panels ensures fully automatic operation. It is possible to work on all 6 sides of the panel at a height of up to 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system operated via PC - TPA Albatros software. The programming editor, featuring a high-level software interface, allows for simple, intuitive machine programming and also offers: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Turret tool diameter optimizer * Independent spindle diameter optimizer * DXF file conversion (geometric conversion) * Import of worklists in ASCII format * Additional key for office-based programming * Barcode scanner * 17-inch LCD monitor * Professional operating system Windows 7 Hsdpfx Ael Ikzgjf Tefb Panel feeding and handling via motorized vertical transfer with rollers and rubber-coated pressure units for securing the panel during processing. Includes a motorized conveyor carpet length of 2000 mm, with electronically adjustable speed via converter. Photo sensors and NC program ensure sequential feeding of one or multiple panels as selected by the operator. Height reading system for panels consisting of an independent axis capable of reading the panel height before loading into the machine. Reading tolerance for dimension: +/- 0.15 mm. If the tolerance is exceeded, a message is displayed and the operator and machine stop the active operation. Panel thickness reading system using a mechanical probe. Horizontal vice – M.O. axis: allows the program to determine the workpiece thickness. Vertical vice – M.V. axis: allows the program to determine the workpiece height dimension. Chain - X axis: Patented double section with laser photo sensors capable of reading the reference zero point prior to machining operations. The double section allows machining on the underside of the panel, permitting processing of all 6 panel sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch, arranged as follows: * 7 spindles oriented on X axis * 17 spindles oriented on Y axis Powered by a high-frequency motor, which enables spindle rotation changes up to 7,000 rpm. The brushless motor allows control of drilling depth and feed speed. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct motion transfer to the tool up to 18,000 rpm. The turret rotates via a controlled axis with a brushless motor, enabling...

Stanje: novo, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Vakuumska črpalka BUSCH R5 mobilna s rezervoarjem, povsem nova. Naprodaj: Hsdpfjwnd Twox Af Tsfb R5 mobilna s rezervoarjem, nerabljena, nova.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Wir bieten zum Verkauf eine HESSEMANN MFA IMPRESSION Multifunktions-Schleifmaschine für Flachflächen an. Die Maschine wurde 2017 für den Eigenbedarf angeschafft und verfügt über einen äußerst niedrigen Betriebsstundenzähler – es wurden nur 100-150 m² pro Monat geschliffen. Hier handelt es sich um eine umfassende Lösung für präzises Quer-, Rotations- und Längsschleifen, die höchste Oberflächenqualität garantiert. Hauptmerkmale und Vorteile: - Arbeitsbreite: 1.350 mm Hfjdpfswp Ul Tox Af Tjb - Schleifvielfalt: Die Kombination aus Quer-, Rotations- (RUT-Bürsteneinheit) und Längseinheiten ermöglicht verschiedene Schleifeffekte. - Präzise CSD®-Steuerung (10 Jahre Garantie): 2 Druckbalken mit computergesteuerter, selektiver Druckeinstellung. Kein Überschleifen der Kanten, konstanter Druck, Ausgleich von Werkstücktoleranzen bis zu 2 mm. Das elektromagnetische System ist wartungsfrei. - Fortschrittliche Automatisierung: Industrie-PC 10,4" LCD-TFT (mit Touchscreen, Windows Embedded Standard), Speicher für 100 Programme. Automatische Einstellung der Schleifparameter (Motordrehzahlen, Start/Stopp, Schleifintensität, Anpressdruck). - Hohe Effizienz: Vorschubgeschwindigkeit einstellbar von 3-15 m/min. - Sicherheit und Zuverlässigkeit: Schleifband-Abblasvorrichtung, Reinigung des Transportbands. - Integrierte Lösungen: Druckrolle am Einlauf für dünne Werkstücke, Hohlwalzen zur Führung kleiner Elemente, Ionisationsleiste, Werkstück-Abblasvorrichtung. Maschinenaufbau: - Gehäuse: Maschinenrahmen mit Endlostisch (Transportband mit ½ Zoll Diamantprofil, Bandreinigung). Konstante Arbeitshöhe 880 mm. Oberteil der Maschine mechanisch an die Werkstückdicke (3-160 mm) verstellbar. - Steuerung: Integrierter Schaltschrank, Industrie-PC 10,4" TFT-Farbdisplay (800x600), CF-Karte 1 GB, Windows Embedded Standard, Touchscreen, Produktions- und Stillstandsindikator, Intranet-Anschluss, Speicherkapazität für 100 Programme. - Andruckrolle: Ø 100 mm, federbelastet und verstellbar. - Hohlwalzen: 2 angetriebene Walzen (Einlauf und Auslauf) zur Führung kleiner Werkstücke. Queraggregat (1 Stück): - Bandabmessung: 5.400 x 150 mm - Bandgeschwindigkeit: 2,0–20 m/s (frequenzgeregelt) - Antriebsleistung: 15 kW - Band-Abblasung, verschleißfreie Bremseinheit, „Tür-in-Tür“-Version R-U-T-Bürsteneinheit (1 Stück): - Bürstenscheiben mit rotierender queroribtaler Bewegung - Kollektivantrieb für bis zu 19 Bürstenscheiben (7,5 kW mit Frequenzumrichter) - Bürstenlauf in beide Richtungen, zentrale Höhenverstellung, Schnellwechselsystem für Bürstenscheiben - Bürstentyp: Flex Trim, Ø 180 mm, Drehzahl: 5–25 m/min (1,5 kW mit Umrichter) Längseinheit (1 Stück): - Bandabmessung: 2.620 x 1.400 mm - Bandgeschwindigkeit: 1,8–18 m/s (frequenzgesteuert) - Antriebsleistung: 15 kW - Bandabblasung (doppelte Düsenanzahl), verschleißfreie Bremseinheit, automatische Ausgleichung möglicher Bandlängenunterschiede, Band gegenläufig - Exzentrische Position der Frontführungswalze für leichte Kalibrierungsarbeiten Bürstenwellenaggregat (1 Stück): - Bürstentyp: Faser, Ø 120 mm - Antriebsleistung: 0,75 kW Vakuumtisch: Sicherer Transport von Werkstücken

Stanje: novo, moč: 353 kW (479,95 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference for customer inquiries: 3-198/IMMEDIATELY AVAILABLE ---MAN TGS 26.480 6x4 Three-Way Tipper with FASSI F195A.2.24 E-DYNAMIC Loading Crane Crane: Hjdpfxsxnnzce Af Tefb * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic four-stage extension: 12.7 m * e-dynamic hose equipment for 2 auxiliary devices * Slewing range: 400° * Dual knuckle boom system with PROLINK (overbendable knuckle arm up to 15°) * Electronic overload cutoff with FX 500 * FASSI Stability Control (FSC), incl. LMB II * Fassi RCS remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outriggers, outrigger width hydraulically extendable to 6.64 m, incl. FSC * Outriggers operable via remote control * FL-System (Full Lift): switchable high-speed valve for boom extensions * LED work lights Vehicle: * Diesel engine MAN D2676 LFAI, 352 kW (480 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic Performance, Efficiency, and Offroad drive programs, up to 70,000 kg * 6x4 drive * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank, 60 l AdBlue tank * Full brake assist * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on front axle, drum brakes on rear axles * RINGFEDER trailer coupling Type 4040/G150A * NN driver's cab: practical (narrow, mid-length, standard height) * Mechanical lifting roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl control panel, 4 functions, operable from outside with door open * Electric sunblind for front windshield, interior * Refrigerator * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7-inch * MAN Advanced sound system * Navigation map Europe and Russia * Online traffic functionality for navigation * Standard drive-train warranty extension for 3rd year of operation up to 450,000 km, see maintenance log for details Body: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane, mounted directly behind the cab (Crane with top features: radio remote control, hydraulic outriggers with radio control, work lights, etc.) Dropside Platform: * Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm * (Alternatively available: loading length 5,200 mm x 2,420 mm x 800 mm) * Front panel height: 1,000 mm Subframe: Robust steel welded construction with two longitudinal beams and cross members to support the 5 mm tipper side profiles and the 4 mm floor plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall, with 2 lashing rings on the inner area, each one at half height on the outside. Fixed corner stanchions with bottom-mounted locks. Tailgate and side walls (one-piece, full-length) made of aluminium hollow profiles, side walls foldable and swinging with tailgate assist. Tailgate also foldable and mounted for swinging action, with central locking integrated into the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, cleanly welded to the tipper profile and longitudinal/cross members. Hydraulic press traverse and tipping arms embedded and reinforced within the longitudinal beams. Lashing rings (4 per side) distributed along the outside of the tipper floor. Steel structure manufactured in grade St 52-3. All steel parts are sandblasted, superstructure components painted or powder-coated in RAL 9016 (single color).

Stanje: novo, moč: 235 kW (319,51 KM), vrsta goriva: dizel, barva: bela, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 4.200 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, žerjav, Internal reference number for customer inquiries: 4-017 MAN TGM 18.320 4x2 BB WITH PAVIC 3-WAY TIPPER BODY AND FASSI CRANE A vehicle suitable for landscaping, road construction, construction site transport, or as a municipal vehicle! Vehicle: - MAN TGM 18.320 4X2 BB crane tipper - Cab type CC: the compact (narrow, short, standard height) - Wheelbase: 3,875 mm - Suspension: leaf/leaf (also available as leaf/air on request) - Drive: 4x2 - Front axle tyres: 2x 295/80R22.5; Rear axle tyres: 4x 295/80R22.5 - Gross vehicle weight: 18,000 kg - MAN TipMatic 12 12 OD automated transmission - MAN D0836 LFLAP diesel engine, 235 kW (320 HP), 1,250 Nm torque, Euro 6d - EfficientRoll transmission functionality - Cruise control - Differential lock on rear axle - MEILLER axial pump 270/45 - Tipper operation from the cab - MAN EasyControl control panel, 4 functions, operable from outside with door open - RINGFEDER type 4040/G150B trailer coupling - Dual-line brake connection at end of frame - Sun visor in front of windshield - Central locking with remote control - MAN Media System Navigation Advanced 7" - Online traffic for navigation function - Smartphone integration - Heated and electrically adjustable rear-view and wide-angle mirrors - Air-sprung driver comfort seat with lumbar support, shoulder adjustment, and heating - Adjustable height seatbelt, driver's seat - 2 working lights on roof of cab - 2 halogen beacon lights on cab roof - Much more Body: Hodsxnn T Ejpfx Af Tjfb - 3-way tipper body 4200x2420 mm, manufacturer PAVIC - Headboard height: 800 mm - Sideboard height: 600 mm - 8 fully retractable lashing rings in platform floor (4 per side) - Material: Hardox 450 - Support for laying down sideboard horizontally with rubber bearing (for long material transport) - Springs to assist opening and closing of sideboard - 2 lashing eyes on headboard (e.g., for securing a compactor plate or grab) - Tipper with hot-dip galvanization and boards, etc., fully painted with 2K truck paint in RAL9016 - Subframe galvanized and painted in RAL 9011 - Left and right side made in one piece, both sides can be opened pneumatically via air valves from the cab, all sides open from below (pendulum-type), manually from top to bottom, center posts removable - Springs as sideboard opening aid for easier handling Additional body features: - Prepared mounting points in the pillars for optional later installation of leaf grids (sideboard extensions PLUS 500mm for, e.g., hedge trimmings transport) Loader Crane: - FASSI F195A.2.24 e-dynamic - Lifting moment: 162 kNm (16.51 mt) - Four hydraulic extensions: reach 12.7 m - E-dynamic hose equipment for 2 auxiliary devices - Slew range: 400° - Double knuckle boom system with PROLINK (articulated arm can be extended up to 15°) - Electronic overload protection with FX 500 - FASSI stability control FSC incl. LMB II - Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) - Special stabilizers, extension width 6.64m hydraulically telescopic incl. FSC - Outriggers operable via remote control - FL-System (Full Lift), switchable fast extension mode for boom sections - LED working lights Financing, as well as leasing or hire purchase, is possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Stanje: zelo dobro (rabljeno), obratovalne ure: 26.271 h, skupna masa: 850 kg, volumenski pretok: 231 m³/h, tlak (maks.): 13 letvica, Oprema: Na voljo je tipska ploščica, PROD. - KAESER MODEL - ASD50 SFC SERIAL NO. - 2541 YEAR - 2019 POWER (kW) - 25 CAPACITY (m³/min) - 0.93-3.85 PRESSURE (bar) - 13 HOURS (LOAD/TOTAL) - 26,271 / 28,531 Hfjdpfevkca Nex Af Tsb

Stanje: novo, moč: 353 kW (479,95 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference for customer inquiries: 1693/IMMEDIATELY AVAILABLE MAN TGS 26.400 6x4 three-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic four-fold extension 12.7 m * E-dynamic hose equipment for 2 additional devices * Slewing range 400° * Double linkage with PROLINK (overbending knuckle boom up to 15°) * Electronic overload shut-off device with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS remote control maxi – 6 functions with 3 joysticks (2-2-2) Hfodsxnnupspfx Af Tjb * Special support legs, outrigger width 6.64 m, hydraulically extendable, incl. FSC * Outriggers operable by remote control * FL system (Full Lift) switchable fast-flow valve for the extensions * LED work lights Vehicle: * MAN diesel engine, 353 kW (480 HP), 1,800 Nm torque, Euro 6e * MAN TipMatic 12.26 OD automatic transmission * MAN TipMatic driving modes: Performance, Efficiency, and Offroad, up to 70,000 kg * Drive: 6x4 * Leaf/air suspension * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank, 60 l AdBlue tank * Emergency brake assist * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * Cab NN: practical version (narrow, medium length, normal height) * Roof hatch, manual * Air-suspended comfort driver's seat with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl control panel, 4 functions, accessible from outside when door is open * Electric sunblind for windscreen, interior * Cool box * MAN SmartSelect infotainment control with touchpad and direct access keys * MAN Media System Navigation Advanced 7 inch * MAN Sound System Advanced * Navigation map Europe and Russia * Online traffic for navigation function * Standard driveline warranty for the 3rd year of operation up to 450,000 km, see maintenance record for details Superstructure: Three-way tipper body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top equipment: radio remote control, hydraulic outriggers with radio operation, work lights, etc.) Flatbed: * Dimensions LxWxH: 5,200 mm x 2,420 mm x 800 mm * (Alternative also available: load length 4,800 mm x 2,420 mm x 800 mm) * Front wall height: 1,000 mm Subframe: The subframe is a robust steel welded construction with two longitudinal beams and cross members to accommodate the 5 mm thick tipper profile and the 4 mm floor plate made from Hardox or Naxtra. The steel front wall is fixed, 1,000 mm high, with 2 round lashing eyes on the inside, positioned at half height on the outer edges. Fixed corner posts with bottom latches. Rear and side walls (one-piece, full length) made of aluminum hollow profiles, side walls foldable and swinging with drop side lifting aid. Tailgate also foldable and swinging, with central locking in the tipper profile. Floor plate made of Hardox or Naxtra, 4 mm thick, cleanly welded to the tipper body and the longitudinal/cross members. Press traverse and tipping arm integrated into the longitudinal members and reinforced accordingly. Lashing eyes (4 per side) distributed on the exterior of the tipper floor along its length. Steel structure made from St 52-3. All steel parts sandblasted, body parts painted or powder-coated in RAL 9016 (pure white).