Tovorna dvigalka na tovornjaku

MERCEDES-BENZ Actros 2745 L 6x2 Baustoffpritsche+Kran Retarder

Stanje: rabljeno, prevoženi kilometri: 197.366 km, moč: 330 kW (448,67 KM), prva registracija: 04/2019, skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, parkirni grelec, žerjav, Mercedes-Benz Actros 2745 L 6x2 Building Material Flatbed with Crane -- * Secondary water retarder * High-performance engine brake * Lane keep assist * Distance control assist * Attention assist * Front axle 7.5 t * Rear axle 13.0 t * Trailing axle 7.5 t, steerable, liftable, and unloadable * Axle ratio i = 2.611 * Electronic brake system with ABS and ASR * Disc brakes on front and rear axle * Secondary water retarder * Trailer brake with dual-line connections on the left * Duo-Matic + Standard trailer brake connection at rear * Frame overhang 1,950 mm * Wheelbase 4,900 mm * Front axle stabilizer * Additional stabilizer for rear/trailing axle * Smoker package * Compressed air connection in cab * Comfort driver's air-suspension seat * Functional co-driver’s seat * Comfort lower bunk * Velour seat covers * Driver's side sunblind * Air conditioning * Residual heat utilization * Cab auxiliary hot-water heater * Drawers under bed * Electric lift roof * Preparation for wide upper comfort bed * Start-assist with 30 km/h speed limiter * L-cab StreamSpace 2.50 m, level floor * Transparent external sun visor * Heated front mirror * Air horns on cab roof * Extended door * Fixed cab steps left/right * Central locking system * Comfort locking system * Economy drive program * Gearbox G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Tubeless front/trailing/rear axle tires 315/70 R 22.5 * Rear axle tires: tubeless 315/70 R 22.5 * Wheel configuration 6x2 ENA * 25t vehicle * Air suspension rear axle * 12.7 cm combo instrument with additional gauges * CD-radio Bluetooth * CB radio pre-install 12 V DIN slot * Toll recording preparation * Main tank left * Tank: 630 l left 650 x 700 x 1600 mm aluminium * AdBlue tank 75 l left * Fog lights * LED daytime running lights * Undershield against dust turbulence * Torque increase in 12th gear * Engine OM471 R6 12.8 l 330 kW (449 HP), 2,200 Nm * Engine spec Euro VI with OBD-C * High-performance engine brake * NA MB 124-10c MPA N-/M-speed * Transmission oil cooling * Front spring 7.5 t, 2-leaf * Standard D40 Ringfeder trailer coupling * Upper hand lever for trailer coupling * Reinforced rear crossmember * Steep shoulder rims 9.00 x 22.5 * Stability control assist * Anti-roll assist * Lane keep assist * Distance control assist * Attention assist * Driver airbag * Cruise control * Weight spec 26.5 t (7.5/11.5/7.5) * Permissible total weight: 26,000 kg * Unladen weight: 14,850 kg * Payload: 11,150 kg * Refrigerator prep --- Body: * Flatbed with aluminium drop sides, 6,500 x 2,480 x 1,000 mm * Bulkhead and forklift collision guard --- Cjdpfx Aeq Dhtrjfqshf Crane: Fassi F195 * With 2 fully hydraulic supports * With 3 extensions * Emergency stop * Heated crane seat * Fifth and sixth control circuits for rotator and stone grab * Load capacity chart: * 4.00 m = 4,350 kg * 6.05 m = 2,910 kg * 8.50 m = 1,925 kg * 10.95 m = 1,420 kg * 13.40 m = 1,130 kg * 1,136 operating hours Optionally, for an additional charge, can be supplied with matching Dinkel 2-axle building materials trailer. On request, we can prepare a leasing or financing offer for you. Mr. Ebert and Mr. Seidel (telephone) are happy to assist you. For further information, please visit our homepage. Errors, changes, and prior sale reserved.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 7.900 h, številka stroja/vozila: #652, nosilnost: 350 kg, tip droga: teleskopski, dvižna višina: 28.000 mm, dolžina platforme: 1.800 mm, širina platforme: 800 mm, skupna masa: 7.490 kg, transportna dolžina: 7.550 mm, transportna širina: 2.500 mm, gradbena višina: 3.450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral outreach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (LxWxH): 1,800 x 800 x 1,100 mm Slewing range: 540° Cjdownq Dpopfx Afqshf Basket rotation: +/- 85° Stabilizer width: 2.56 / 3.90 / 5.10 m Other features: - Basket jib 195° - Crank rotation table - Automatic basket jib stowage - Roof protection grid 04/2024: Clutch and master-slave cylinder replaced; oil sump and fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter and basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck batteries replaced 04/2025: Solenoid coil replaced As of 28 April 2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 15 h, nosilnost: 6.000 kg, dvižna višina: 26.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 3.100 mm, moč: 115 kW (156,36 KM), dolžina vilic: 1.200 mm, lastna masa: 18.000 kg, skupna dolžina: 8.080 mm, vrsta pogona: Diesel, gradbena širina: 2.500 mm, Rotating Telehandler Mast type: Telescopic Transmission: Hydrostatic Speed category: 20 km/h Condition: New Cjdewbw Hkjpfx Afqehf Technical condition: New Front tires type: Pneumatic Front tires size: 18 - 22 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 18 - 22 Rear tires condition: 80 - 100% Description: Thanks to its 3-in-1 design (telehandler, crane, and aerial work platform), the MRT 2660 is a versatile solution for your material handling tasks. The MRT 2660 can lift up to 6 tons and provides very precise control over loads thanks to its pentagonal boom cross-section and outstanding 360° visibility. With 360° rotation, you can carry out various tasks without moving the machine. It can be operated on wheels or outriggers, providing increased contact area for safe operation. The MRT 2660 is intelligent, ergonomic, and comfortable—perfectly suited for applications in construction and industry. It is a powerful and precise tool you won’t want to be without! A range of attachments, such as personnel basket, winch, or bucket, is available for this telescopic forklift. 3rd hydraulic valve, heater, full cab, air conditioning, Radio remote control for work and drive functions.

Stanje: novo, Leto izdelave: 2025, Multitel MTE 270 on Iveco 'Daily' – 3.5t truck-mounted aerial platform (self-propelled access platform/lift) – year 2023 – NEW with warranty – Cjdpfxoq T Nycs Afqehf

Leto izdelave: 2004, Stanje: delavnici obnovljeno (rabljeno), No. 2054 1 used, partially overhauled and function-tested Extruder Alphatec Type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Drive: 75 kW, AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW Chodpjiyya Aefx Afqef 3x temperature control zones for downstream equipment Control cabinet – new control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Stanje: novo, moč: 375 kW (509,86 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #307 MAN TGS 35.510 8x4-4 BL Kroll K 1.0-18.0 /36PESP, Suction Unit Bodywork * KROLL * Tank Material: S355J2+N (St. 52.3) * ADR Vacuum/Pressure Tank Vehicle K 1.0-18.0 /36PESP * 18,000-liter tank capacity (air volume) * 15,000-liter sludge capacity | 3,000-liter emulsion chamber * 1,000-liter flushing water capacity (non-pressurized) * Discharge with sliding piston Chassis * MAN TGS 35.510 8x4-4 * 8x4-4 BL * TipMatic * 510 HP / 375 kW * 2,600 Nm * EURO 6 * Fuel volume 400 liters * Chassis color: RAL 9010 Pure White * Cab color: RAL 9010 Pure White * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Coolbox Vacuum System * CVS VacuStar W1600 approx. 1,550 m³/h at 400 mbar * Approx. 30m suction hose DN80 on the tank lid with announcements High-Pressure System * Speck P52/100-150 100 l/min at 400 bar * Small hydraulic HP hose reel for 60m DN 13 hydraulically * Approx. 60m flushing hose DN 13 Special Features * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Suction connection pre-chamber DN100 remote controlled * Manhole FN500 on the left side * HP pistol * Noise insulation covers for pumps left and right * Removable and swiveling halogen work lights * LED ambient lighting * Radio remote control with two batteries * Tiltable scrap box * Reversing camera * Ladder with holder and anchorage points * Advertising boards on left and right of the tank Technical Data Codpfxevh H Hbe Afqohf * GVW 32,000 kg * Length 10,700 mm * Height 3,800 mm * Width 2,550 mm * Wheelbase 3,900 mm For further details and/or pictures, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Changes, intermediate sale, and errors reserved. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our General Terms and Conditions and excludes any warranty. For further details and/or pictures, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Changes, intermediate sale, and errors reserved. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our General Terms and Conditions and excludes any warranty.

Stanje: rabljeno, prevoženi kilometri: 48.677 km, moč: 130 kW (176,75 KM), prva registracija: 01/2011, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, vrsta prenosa: mehanski, Oprema: ABS, elektronski program stabilnosti (ESP), parkirni grelec, Nissan Cabstar 35.13 PALFINGER Aerial Platform 26 Meters 4x2 Chjdpfepvli Ssx Afqof Suspension: leaf spring Wheelbase: 2.95 m PALFINGER Aerial Platform Model: P 260 B Year: 2011 4x hydraulic extensions 4x hydraulic outriggers 1x work basket (1.40 m x 0.70 m x 1.10 m) Equipment: - electric windows - auxiliary heater We are also happy to assist you with financing/leasing options in cooperation with our partners. All information without guarantee. Subject to error and prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Large semi-automated Polar 137 XT-Autotrim Pace Cutting System with stack lift, jogger with counting scale, gripper transport system, turn gripper, and unloader, year 2010, approx. 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height with a loading lift, placed in the jogger by the operator, jogged, and then automatically transported by the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter, where it is rotated. After cutting, the Transomat automatically deposits the stacks onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting or lowering. Jogger RAH-4 with air removal roller and discharge for rear-table feed Usable format up to 75 x 105 cm Discharge of jogged cutting stock is automatic to the rear into the STR stacking rack. The Autotrans gripper transport system then transfers the stacks to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting layers. Chjdpfxsxd U Sas Afqjf Gripper transport system POLAR Autoturn – gripper transport for rear-table loading and turn gripper Accepts the prepared cutting stack from the stacking rack or buffer table. Via air tables, which optimize the handling process with an air cushion, the cutting material is transported directly to the rear table of the cutter and positioned precisely there. During transport, the grippers hold the cutting stack securely in place, ensuring that even aligned stacks remain exactly squared. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function, i.e., automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear-table loading), also allowing formats with a diagonal of ...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Z-axis: servo-electric, transversely movable to the machine longitudinal axis, stroke: 1000 mm, maximum speed: 2 m/s, maximum handling weight: 5 kg (sum of gripper, parts, and G-axis), repeat accuracy: +/- 0.1 mm. C-axis: pneumatic rotary axis, rotation range: 0°/90°. B-axis: pneumatic, 90° swivel to reduce the stroke of the Z-axis. Z-axis stroke extension: up to 1000 mm (for version with B-axis). G-axis (gripper stroke): pneumatic drive, stroke length: 50 mm, end positions adjustable manually. Documentation available. Cjdpjtlucnefx Afqjhf

Stanje: rabljeno, The Horizon APC-T61 is a high-performance hydraulic guillotine cutter designed for precision cutting, making it ideal for small and medium-sized print shops and binderies. The machine is in as-new condition, fully functional, and ready for immediate use. Key features of the APC-T61 include the ability to store cutting programs, an electronic digital display with 0.1 mm accuracy, and the simple program start via a push button. The knife bar and hydraulic clamping system ensure precise and efficient cutting operations. Technical specifications of the APC-T61 are as follows: - Cutting length: 610 mm - Table depth: 620 mm - Cutting height: 100 mm - Power supply: 380 V / 50 Hz - Power output: 3 kW Chsdjw Irlgjpfx Afqef - Weight: 700 kg The machine is supplied with comprehensive accessories, including replacement blades, shaft, operating tools, tapping block, and user manual. The hydraulic guillotine Horizon APC-T61 is currently in stock and located in Germany. It offers a reliable and efficient solution for your cutting requirements.